[X]Assistant

[GREK1993]

Highscreen Omega Prime S - Official firmware
Highscreen Omega Prime S
Description | Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

Drivers for fastboot (for those who did not install the machine) .rar(3.69 MB)
fastboot.rar(144.08 KB)

Instructions

Repair both IMEI
Instructions for upgrading to version 4.4

Install CWM Recovery

Installing CWM 6.0.5.0

1) Download the archiveCWMRecovery Prime S.rar(8.51 MB)

2) Unpack the archive in any folder
3) Click on Recovery.bat
4) Click on Enrer and connect the device with the volume down button held down if this window appears correctly
5) Press Enter, the phone will reboot.
6) Enter the CWM, hold the volume up and hold the power button until it enters the CWM
That's all rejoice
YOU MUST BE INSTALLED ADB AND FASTBUT DRIVER !!!

Installing CWM from your phone

1) Downloading install
2) Throw cwm.img on cd cardВ® [ROOT] Recovery Tools -Flasher
3) Go to the Recovery Tools click on Recover Flash Memory, another from the storage
4) Select our cwm and click and restart the device
Everything is ready now you have CWM

Installation via fastboot

1) 3recovery.img(8.46 MB)
to the fastboot folder
2) We squeeze fastboot by holding down the Shift button and then the pkm and click to open the command window
3) We write in fastboot flash boot recovery.img

Install Root rights

1) DownloadUPDATE-SuperSU-v2.37.zip(3.8 MB)

2) We throw on the cd card
3) Go to the CWM and install
4) Reboot

Firmware

Official Ukrainian 4.4.2 and from Greek (mod) 4.3 - updated links
Mod 4.3 from GREK1993
Official firmware version 1.8 (4.3)

How to restore a brick

1) Install CWM Recavery
2) Downloading the firmware from the cap we throw it on the sd card
3) Go to the CWM holding the power and volume buttons up
4) There we go to mounts and storage further format system format data format cache
5) Click Go Back
6) Then install zip further choose zip from / storage / sdcard choose our firmware yes
7) Fasting how the phone is flashed click Go Back and reboot system now
8) Everything is ready !!! the phone came to life

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedCusco - 19.10.18, 10:43

Reason for editing: Editing spoiler "firmware"

[GREK1993]

Firmware for Highscreen Omega Prime S
1. Deodexed
2. Added root
3. Added busybox
4. Removed4Sync, DataMonitor, DMCclient, Exchange2, FaceLock, FileExplorer, GenieWidget, GooglePlus, PicoTts, PlayGames, QuickSearchBox, SoundRecorder, Street, TalkBack, VideoEditor, VoiceDialer, VoiceSearchStub
5. Added byRoor Explorer, Titanium Backup Pro, New Launcher Sounds from Android 5.0
6.Updated some applications
7. New boot-animation.
Installs via CWM Recovery

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ!!! download

Screenshots

Firmware

https://yadi.sk/d/KUZGy7EBgX9zs

Post has been editedCusco - 19.10.18, 10:47

Reason for editing: link replaced

[Si-Ar]

Knowledgeable people please answer.
1. After the transition to the new firmware data and applications are saved?
2. After switching to the new firmware and the subsequent wipe, does the root remain and the programs included in the firmware (supersu, titanium backup, etc.)?
3. If you do wipe data from microsd cards are also deleted or not?

[GREK1993]

Si-Ar @ 02.12.2014, 14:50

2. After switching to the new firmware and the subsequent wipe, the root remains and the programs included in the firmware (supersu, titanium backup, etc.)? 3. If you do wipe data from the microsd card is also deleted or not?

will remain and the first is

[Adidas100]

Why does not it turn out to put a custom recovery. After running Recovery.bat hanging waiting for device

[arts_VP]

Well, what happened?

Posted 12/02/2014 5:35 pm:

Adidas100
Well, what happened?

[Adidas100]

Nope, all that you can have rearranged and still does not want. Maybe it's in Windows 8?

[GREK1993]

Adidas100 @ 12/02/2014, 16:59

waiting for device

means connect the device and connect it must be turned off with the button pressed down and must be installedADB AND FASTBUT DRIVER !!!

Post has been editedGREK1993 - 02.12.14, 19:40

[GREK1993]

Today, Highscren WinJoy and Highscreen WinWin have been added to the Highscreen knowledge base. I hope our device will appear soon.

[Aruskas]

[email protected], 18:59

Why does not it turn out to put a custom recovery.

I installed from the phone through the program Rashr - Flash Tool. Unzip the CWM and the recovery.img file on the card, go into the program and select Recovery from storage, point to recovery.img and agree. And you are the owner of a miracle called CWM Recovery. Good luck !!!

[GREK1993]

Installing CWM from your phone

1) Downloading install
2) Throw cwm.img on cd cardВ® [ROOT] Recovery Tools -Flasher
3) Go to the Recovery Tools click on Recover Flash Memory, another from the storage
4) Select our cwm and click and restart the device
Everything is ready now you have CWM
Root needed !!!

Install Root rights

1) DownloadUPDATE-SuperSU-v2.37.zip(3.8 MB)

2) We throw on the cd card
3) Go to the CWM and install
4) Reboot

Post has been editedGREK1993 - 02.12.14, 20:49

[Adidas100]

Thanks for the help!:)

[Si-Ar]

Adidas100
I do not know about you, I got everything without dancing with a tambourine

[kim kallstrom]

And cm11 did not try to collect?Assembly instructions for ANDROID from sourcesIt would be interesting.

And here is a good, detailed manualAssembly instructions for ANDROID from sources (Post # 24253681)

Post has been editedkim kallstrom - 03.12.14, 11:40

[GREK1993]

kim kallstrom @ 12/03/2014, 11:27

And cm11 did not try to collect? Instructions for building ANDROID from sources would be interesting. And here is a good, detailed manual. Instructions for building ANDROID from sources (Post # 24253681)

it's hard enough
right now I'll do the port with xperia

Post has been editedGREK1993 - 03.12.14, 17:19

[Caliph1]

With xperia? This is good, my favorite is this xperia.

[cacciapaglia]

guys, I think it or rev. S to take, but the design still like this more ..
please tell me i have 2 questions:

1 - is there enough for a day (light at least) it with vocals, music and VC?

2 - can I flash it without a PC? (I mean, install CWM and flash it with any firmware)?

Thank you very much in advance for the answers, please do not disregard please: happy:

[GREK1993]

[email protected], 01:36

1 - is there enough for a day (light at least) it with vocals, music and VC?

Personally, I have enough battery for a day of active use.

[email protected], 01:36

2 - can I flash it without a PC? (I mean, install CWM and flash it with any firmware)?

Yes, you can instructions in the caps

[cacciapaglia]

GREK1993,
Thank you for the quick response! )) Well, I think for a day it is hardly enough, especially active use))))
And yet, because the root is not needed to install CWM and sewing through CWM? sorry for noobstvo ..

[GREK1993]

[email protected], 01:50

And yet, because the root is not needed to install CWM and sewing through CWM? sorry for noobstvo ..

if you put cwm from the computer, then no

[Si-Ar]

I installed the firmware from the header, everything is fine, but the settings have stopped running, it gives errors. Who faced? How to fix?