When flashing through SPFlashTool, unless absolutely necessary, do not flash the Preloader partition. Install other firmware only if you know what you are doing. there iscasesgetting bricks. Before starting any action, make a full backup.
I ask all device owners to look here! Help other forum members! Actual!Announcement
Original firmware in zip format for stock recoverymyzte.ru Mirror -(Post V323) A full backup for SPFlash Tools with Philz already replaced with a recovery is in a technical post (second post of topic) -technical post GApps Open Project(Post thedeaddust)
The desire to say thank you to the author of the firmware by raising your reputation!
A full backup for SPFlash Tools with Philz already replaced with a recovery is in a technical post (second post of topic) -technical post Attention!SP Flash topicThere was an instruction for creating a full dump of the device, I recommend doing it before starting any actions. This dump can be restored via the write memory function.
the details
In contrast to the old method (section by section, preloader, system, recovery), this method records all the information in one memory into the device’s memory, which completely returns to the initial state, including the markup.
Installing the original firmware through the recovery
0. Initially, you should have stock recovery! 1. We place the archive of the original firmware (in the form of update.zip) in the root of the internal memory (sdcard). 2. Turn off the phone. If the button "power" does not work - remove and insert the battery back. 3. Enter the recovery: Clamp "volume up" + "power" 4. Choose apply update from sdcard ->update.zip (Navigation in the menu: "volume down" - menu selection, "up" - selection 5. Expect results and reboots. 6. If the result is not comforting, we flash the full backup through the SP Flash Tool.
Chinese menu ("factory mode") -(Post R_Gen)(Post dva161)Attention - Chinese! Do not do anything in this menu. Login to the recovery: "Volume" Button up + "inclusion" long press until it turns on.
1. Install applications on the card using link2SD -(Post shimarulin) 2. Substitution of internal memory for external card memory Archive for firmware h / z recovery. For installation on the drain -(TheMaximal Post) Another way, with instructions(Post villi775) 3. Remapping. With this operation, you can increase the memory for applications, recovery, or other sections, taking space from the media section (where the photos, dcim folder, etc. are put.)themesavagemessiahzine.com Guide for redesigning our device -(Post Headshotalx) Redistribution plus memory swapping, ready archives -(Post a1ex_n)Perhaps the method is not entirely correct and safe, since there is no formatting of sections for the new markup and no resizing of sections. Such a conclusion can be made by reading the topic on redevelopment.
If there is a shortage of RAM
Using the swapon script or programВ® SWAPit RAM EXPANDER(the program gives a negative effect, according to reviews) you can include a swap file (swap). To enable through the script, you need init.d support for the kernel Please note that the phone already has a paging file:
About firmware without battery -(Post V323) New variation on preloader recovery theme - (Fast atmoska) RO memory loss event (Read Only) (Post velikijzhuk) Photo from the disassembly of the body, there is a photo of the chip internal. memory -(Post kirill kites)
adb shell<shell command>The command is sent through the shell. Example: adb shell rm -r / system / sd / app Uninstall applications installed on a memory card. Example: adb shell rm -r / system / sd / app-private Uninstall applications installed on the memory card in the private section. Example: adb shell cat / proc / mtd Will display information about the device’s internal memory partitions. It will give something like:
Example: adb shell df Will display information about free resources in the memory sections of the device. It will give something like:
Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 160664 0 160664 0% / dev / dev / block / mtdblock4 40960 1292 39668 3% / cache / dev / block / mtdblock3 256000 146888 109112 57% / system / dev / block / mtdblock5 179328 125728 53600 70% / data / dev / block / mmcblk0p1 15521280 10056880 5464400 65% / sdcard
Memory card support
Only MicroSD and MicroSDHC are supported (Not all! For example, SDHC Sandisc extreme 16gb did not go) This card works -(Post V323) Formatting exfat is not supported by Fat32 only standard cluster size. Ext4 / 3/2 - need to check. linux swap works
Post template with firmware
[CENTER] [size = 4] [color = blue] Firmware name [/ color] [/ size] [color = "# 000000"] [b] [size = 3] Download: [/ size] [/ b] [/ color] Here we indicate the link to download the firmware [/ center] [spoiler = [color = red] Information [/ color]] You can write a few words about the firmware, which forced you to make a port, mod, etc. [/ spoiler] [spoiler = Features of the firmware] Here we indicate the features of the firmware. Example: "When you quickly click on the version of the android - opens the extended developer menu." [/ spoiler] [spoiler = [color = "# 000000"] Changes [/ color]] We write here what you did on the firmware. [/ spoiler] [spoiler = [color = red] Minuses [/ color]] Here we indicate the minuses, if any. [/ spoiler] [spoiler = [color = "# 000000"] Screenshots [/ color]] Each firmware must have screenshots for the user to see what he puts. [/ spoiler] [spoiler = [color = purple] I express my gratitude [/ color]] Here we indicate the people who have helped you with something. [/ spoiler] [spoiler = [color = red] Installation [/ color]] 1. Download the firmware and throw it into the [b] root of the memory card [/ b] (/ sdcard) 2. Go to Recovery: On the phone off, hold down the buttons: [b] Volume up + turn on [/ b] 3. Select item [b] Wipe data / factory reset [/ b] 4. Now select [b] Install zip from sdcard [/ b], then [b] Choose zip from sdcard [/ b] 5. Choose firmware 6. We are waiting for the firmware to be installed. "
Some kind of strangeness with firmware for Spain. With firmware on it (v 1.0.2)linkThe second sim card disappears. If you take the firmware for Thailand (v 1.0.4)linkthen everything is fine. But one small BUT! No Russian language :(
dedma3ay I have not been with this device for a long time ... I bought a phone on Qualcomm. So would have tested. P.S. Can in Spain version with 1 sim, and the rest of the iron is identical? wawan123, Add money and buy something better .. for example, S4 Mini. I was in the salon about 2 weeks ago, cost 9990r ...
Two days ago I purchased this device, I still can not turn on the 3G network. In the network settings, the "network type" item is blocked. I tried everything, but it remains locked, the phone works only with E Internet. How to fix it?
JaguaRR, * # * # 4636 # * # * - the first item is below, then look for WCDMA \ GSM or WCDMA Only
As I understand, this command should be entered in the call, but when I enter it and I make a call, they say “the number is wrong” and that's it. What am I doing wrong?
Headshotalx judging by the reviews, he generally has a small amount on his hands, he would have an IPS matrix, in general he would have been handsome. For the work itself, he himself took it in a megaphone yesterday. The topic was decided to be seen immediately for the firmware to create: D of which. not even
Something levels of autoriness are not entirely smooth, they need to be corrected, otherwise it is not quite correct to replace values
At the request of those who are too lazy to read a lot of books in the program topic. Removed unnecessary, not related to our device 0. Prerequisites: The program SP_Flash_Tool is downloaded and unpacked on the PC. VCOM USB drivers are already installed. 1. Unpack the archive with the factory firmware for your smartphone (the directory to the unpacked folder with the firmware files should not contain Cyrillic characters). 2. Turn off the smartphone. The cable is not connected to the computer. Remove and insert the battery back. 3. Run the program SP Flash Tool. Click on the Scatter-loading button and select the file MT6572_Android_scatter_emmc.txt (it lies in the folder with the firmware). 4. Uncheck the Preloader. Click the Download button. 5. Connect the switched off phone to the computer with a cable. The program should see it and start the firmware. If the phone is not found, disconnect it from the computer, remove and insert the battery and reconnect to the computer. In the device manager, when the drivers are correctly installed at the time of the firmware, they should monitor the mtk usb port in the com-ports (MediaTek PreLoader USB VCOM Port). And upon completion of the firmware or when any error occurs, the device turns off and disappears from the device manager. 6. After the end of the firmware, disconnect the phone from the computer and turn on the device. 7. Before the first launch, it is advisable to go into the recovery and execute wipe - cache, data.
Today I made a port based on the Philips S308 firmware, which is much nicer than the standard icon and lockscreen: D Who wants to try? Or a rotten topic ...
Such a problem. Sometimes the screen is blocked or extinguished and then does not respond to pressing the power button. What could be? It has already reached the point that after removing the battery and turning it on, it did not burn. It seems to be on, but the screen did not work. The indicator above blinked and the buttons glowed, sometimes vibrated. As a result, made a reset through the recovery. It helped.