[X]Assistant

[hentrs]

Alcatel One Touch X602D - Discussion

• In the subject are allForum Rulesand10 commandments novice who is hard to master the Rules of the Forum
  
• To compare the device with other models and on the choice, refer to the topic.Selection and comparison of wireless modems and mobile routers
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the button.under the message where they helped you, and write thanks.
  
• Unlock codes for the device are requested in the topicHere you can get device unlock codes for FREE.
  
• Useful topics to note:Forum FAQ, How to search the forum?
  

A photo:

Photos of the entrails
Alcatel One Touch X602D - Discussion (Post palexxx # 67635306)
Alcatel One Touch X602D - Discussion (Post palexxx # 67634839)

Technical characteristics of the modem:

Technical characteristics of the modem:
Work in the UMTS (900/2100 MHz) and GSM (850/900/1800/1900 MHz) bands.
Speed ​​using data transmission technology:
->HSPA +: up to 21.6 * Mbps - when downloading; and up to 5.76 * Mbit / s when sending data.
->EDGE: up to 236 * Kbps - when downloading data.
Indication of connection status.

Compatible with computers equipped with MicrosoftВ® WindowsВ® operating systems
(XP SP3 32 bits, Vista / 7/8 / 8.1 32/64 bits) or Apple Mac OS X (10.7 - 10.9).

System requirements:
Central Processing Unit (CPU): Pentium 4, frequency 1 GHz or higher.
RAM from 512 MB (recommended - 1 GB).
Operating System (OS): MicrosoftВ® WindowsВ®
(XP SP3 32 bits, Vista / 7/8 / 8.1 32/64 bits) or Apple Mac OS X (10.7 - 10.9).
Universal Serial Bus (USB 2.0) modem interface.
100 MB of free hard disk space.
1 free USB 2.0 port.
Screen resolution: 800 by 600 or higher
(recommended - 1024 at 768).

Note:
(*) - The indicated speeds are a theoretical maximum. Actual speeds depend on the terrain, the density of the surrounding buildings, the workload and network configuration of the cellular operator, the tariff plan parameters and other external factors.
To increase the speed of data transmission, as well as to improve the quality of modem operation, it is recommended to place the modem in the zone
maximum cellular signal, for example, near the window.
Improper system configuration can degrade the performance of your computer with a modem.
For Windows Vista operating system, it is recommended to install a service pack.
Service Pack 2.
For Windows 7 operating system, it is recommended to install a service pack.
Service Pack 1.

Useful links:

Installing the Alcatel OneTouch X602D USB modem on Windows
Installing the Alcatel OneTouch X602D USB modem on MacOS X
Alcatel OneTouch X602D USB Drivers
OpenWRT - connect Alcatel x602d
Firmware for all operators
Change IMEI
Another firmware
Another link to the firmware
X602D Recovery
Recovery X232D
About unlock codes

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links, or through QMS.

Post has been editedDomovoj - 02.03.18, 11:07

Reason for editing: added utility in the header

[evgen201313]

Help please Unlock Alcatel X602D 3G modem
have 864343020130356

[Killerusha]

[email protected], 14:51

Help please Unlock Alcatel X602D 3G modem
have 864343020130356

I flashed the firmware from the connection and got an interesting result: the modem is visible only in the dashboard of the biline but all the sims are read.

[-OVK-]

Killerusha @ 03/10/2015, 18:35

I was stitching firmware from the connection

Can you link to the flash?

[Killerusha]

search topic

[-OVK-]

In the subject from the connected firmware I did not find, there is only the official one

[Killerusha]

And what do you think she is?

[qwertyman2013]

Hello! I ask for help, I bought this device in the Connected, theirs is the same. So here. I took it for a laptop, this device does not want to work in any way on Windows 8.1. The driver's laptop is only for 8.1 ... I tried to set 7, everything would be fine, but it is not activated on the laptop and here. Disable driver signature. Drivers seem to be installed, but the software itself does not see it.

[Killerusha]

Dashboard from Beeline savescatch

[efimrus]

Thank you brother!!!;) from Beeline, the software really saves and hams the SIM card from MegaFon as its own))): rofl: Only I updated the latest firmware in Win XP first, when I got an update to the Internet, he didn’t work anywhere, even in your opinion method, but when updated it plows like a clock, and on 8.1, 8, 7.} -): rofl: It’s just funny when Megaphone ends, I’m starting to activate the starting tariff from Beeline, I thought for a long time what to press: lol:: rofl:: thank_you :

Attached images

Post has been editedefimrus - 17.03.15, 13:50

[Proximus87]

Guys, is there a real way to get this piece of iron from a coherent one, on win7 and win8? I tried, on xp update the firmware as in the previous post, wrote comrade. Did not work. The program is connected, says that the firmware is the last. And on 7 and 8 is dull. The program does not want to see a modem in any way! Got a cure?

[alecs535]

Proximus87,And connect manager from Beeline use?

[clash42]

at one point, stopped working, is defined only as a storage device.
after reinstalling the connection manager bydline, in the device manager it hangs like "SCD USB Composite Device".
I put firewood - "does not need updating" o.O
where to dig?
if to delete firewood and when updating a config. the equipment turns out to be "HSPA + USB modem" and if you put the firewood on it, it rolls back to the storage device and appears in the explorer or (more often) stupidly writes "FAILURE" during installation.

Post has been editedclash42 - 27.03.15, 09:48

[skull2005]

Hello!
This is my first post, so do not kick)
I want to tell you how I started this USB-modem in Linux Mint 17.1, can someone come in handy

1. Downloaded the firmwarefrom here. I did it and it turned into a modem from the Connected)
2. Next, copy the command in the console:
sudo apt-get install usb-modeswitch
sudo usb_modeswitch -v 1bbb -p 022c -u 2 (set to modem mode)
sudo modprobe usbserial vendor = 0x1bbb product = 0x022c
sudo apt-get install wvdial (the standard dialer in Minte does not work)
sudo wvdialconf /etc/wvdial.conf
sudo gedit /etc/wvdial.conf
we insert this config in the editor:

[Dialer beeline]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0 = 0
Init3 = AT + CGDCONT = 1, "IP", "home.beeline.ru"
Modem Type = USB Modem
Baud = 7,200,000
New PPPD = yes
Modem = / dev / ttyUSB1
ISDN = 0
Phone = * 99 #
Password = beeline
Username = beeline
Auto Reconnect = on
Abort on Busy = on
Stupid Mode = on
if your modem is not on / dev / ttyUSB1, change to the desired one, in theory wvdial should find the modem itself, you just need to add initialization lines, number, password and login

sudo wvdial beeline
All connecting people: happy:

The only problem is that after rebooting, you need to again use the "sudo usb_modeswitch -v 1bbb -p 022c -u 2" command to switch to modem mode, so you need to register it in autoload

[kaizerrr]

I have flashed the Beeline modem with the firmware from the previous post - now it works with any sim card.
Connect manager from Beeline and firewood too.
How does anyone know the At command for the router for him?

Post has been editedkaizerrr - 03.05.15, 20:20

[skull2005]

[email protected], 09:49

How does anyone know the At command for the router for him?

He tried to find AT teams in the Internet, but without success. If the router uses OpenWrt or a similar system based on Linux, you can try to google on the topic "your_roader_name usb_modeswitch". Using usb_modeswitch in OpenWrt can be readhere

[DOOST13]

I purchased this gadget in the Beeline office. On win8.1 everything was fine, plowing without complaints.
The only thing that upset, the lack of Statistics tab in the dashboard. Connoisseurs, is it possible to update the version?
I'd love to track statistics.
internal version: PC software X602-0.w11.001.E1.0E
software version: X602-D-CS.F11.011.E1.08
device version: 03

Post has been editedDOOST13 - 29.05.15, 03:53

[zidfriend]

How is this device in modem only mode to connect? And is it possible to make friends with android through ppp ???

Attached files

3G_Modem_tool_PortSwitch.zip(159.87 KB)

[rewtyh]

How to unlock?

[-OVK-]

[email protected], 08:50

How to unlock?

install firmware from a connectionhttp: //www.alcatelonet...t/download/ot-602.html

[rewtyh]

I installed, I began to read Sims, but there is no speed, in another modem there is 15mbit, in this 1mbit, and there and there 3g.