[X]Assistant

[silionel]

Motorola Moto G (2nd Gen) - Official firmware
Motorola: Moto G (2014), Moto G (2nd Gen.), Moto G (2nd Gen.) Dual Sim, Moto G2, Moto G2 Dual Sim, XT1068, XT1063, XT1064, XT1069
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Official firmware пїЅ | AOSP firmware пїЅ

Important information!

The topic is discussedonly official firmware, getting root rights and unlocking the bootloader (Bootloader)

Attention! There is a search by topic:You can find the right top or bottom left of the page.
Be sure to read:

• This post collects all the information on updates - link. At the moment there is - 5.0.2 for XT1068, 5.0.2 for XT1063 (that is, everyone got the update). Expect 6.0. Links and instructions in the first spoiler of this post.
  
• Rollback to 4.4.4 after 5.0 is possible on condition of unlocked bootloader
  
• Say "Thank you"by increasing your reputation by clicking on the [+] button under the avatar of the person you are talking to. If you do not have 15 forum posts yet, ask the moderator to raise the reputation of the person who helped you through the "Complaint" button
  
• ImagesPlease hide in the spoiler. How to do itread here. If you are writing a post from a mobile, you can edit the message later when you get to the PC.
  
• When communicating / reading topics usebuttonsand. This will help make our theme cleaner and more useful. Read more about this tool here:User Moderation - implementation

All about OTA firmware updates
PTA spread in waves. Those.not everyone gets it right away. Therefore, if you already know that an update has been released for your phone, and you still haven’t received it, either wait or install it manually.

Remove the notification of the arrival of OTA can freeze the applicationMotorolaOTAor deleting files3c_ota.apk and 3c_ota.odex from / system / priv-app.

The OTA update itself is downloaded to the / cache folder and has a name that matches the current version of the system, and not the one to which it is updating.

The reasons why installing the OTA update ends with an error:
1. Remove any system applications, exactly like freezing them with Titanium.
2. Modification of system applications. Almost all the mods from the theme of embellishments, as well as the individual picking of the same build.prop file, fall under this.
3. Presence of custom recovery or custom kernel.
4. Installed Xposed Framework. To remove it correctly, you need to go to the xposed installer, go to the Framework tab and click on delete. The installer itself and its modules can not be removed.
5. Starting from 5.0, the presence of the root began to interfere with the update. You can delete the root in the supersu application itself. (not at all, if you have a root and do not install it, try deleting the root)

Reasons not affecting the installation of OTA:
1. Unlocked bootloader.
2. Custom boot logo.
4. Detaching from the operator.

If there are causes affecting OTA, you need to eliminate them.flash stock firmwareeither completely (implying data loss), or, if you are sure that you downloaded the exact same firmware that is currently installed on your phone, then you can safely delete the mfastboot erase userdata commands from the .bat file (right mouse click on .bat file - change).

Drivers and Utilities

Motorola devive manger
mfastboot
Google USB driver
Moto G2 Tool By Glebvz
Moto G2 Tool By Glebvz 5.0
Moto G2 Tool By Glebvz 6.0
TWRP_2.8.0.1_Titan_v2.img
TWRP_2.8.3.0_Titan.img
The latest version of TWRP

Firmware

You can always find out the current firmware version in the About Phone settings - About>System version.

The region of the firmware is indicated by the last two letters at the end of the paragraph the system version. For example (UK- England, US-America, DE-Germany, BR-Brazil, etc.).

Catalog of official firmware
andone more.and
one more +1.
one more +1.
one more +1.

Instructions

How to flash firmware 4.4

Training

Download the firmware
Download mfastboot and drivers, install drivers
We include the mode for the developer: Settings (Settings) ->About phone (About Phone) ->Build number. 7 times we press and get access. Go to the Developer menu and turn on "USB debugging"
We save all that is important to us, and do not forget about the charge not lower than 70%

Installation

Unpacking the firmware and mfastboot in one folder
Put the phone in fastboot mode: turn off; clamp for 5 seconds. volume down button + on; let go. Scroll through Vol DOWN. Confirm Vol UP. Power button in the fastboot menu is not needed.
We connect the phone to the PC and run mfastboot and in the window we write adb reboot-bootloader

then we enter in turn the commands
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata

and finally we overload the device
mfastboot.exe reboot

If the phone does not normally pass the boot menu, you need to go back to fastboot and write the wipe in the window
mfastboot.exe erase cache
mfastboot.exe erase userdata

mfastboot.exe reboot

Install Android 5.0 Lollipop

Download and throw the desired firmware version at the root of the internal memory

Put the phone in recovery mode: turn off; clamp for 5 seconds. volume down button + UP + ON; let go. should get

Scroll through Vol DOWN. Confirm Vol UP. Power button in the fastboot menu is not needed.
Choose recovery and wait for the dead robot to appear.
If you have Android 4, then you need to press VolumeUp + VolumeDown + Power again.
- If you already have Android 5 installed, then hold the power button for a few seconds and press Volume UP
Next, "apply update from sd card" and select our file
After the upgrade, you will be returned to the recovery, and you will only need to restart the device.

Detailed procedure for installing the firmware for the modelXT1063
Upgrade instructions to 5.0.1 for modelXT1063with further receipt of PTA.
Upgrade instructions for 5.0.2 for modelXT1068for non-rooted and unlocked 4.4.4.
Another instruction forXT1068 to 5.0.2.

Instructions for the firmware of the original image (return to stock firmware) OS Ubuntu Linux

Install Marshmallow 6.0
Installation Guide Marshmallow 6.0XT1063, XT1064, XT1068, XT1069

ROOT
RTH at 6.0
RTH at 5.0. Reboot without bootlap.
Unlocking the bootloader, Root, TWRP, program for firmware G 2014

Old hathere

Post has been editedsilionel - 03.09.17, 13:37

Reason for editing: added firmware catalog

[NokPda-DE]

serik76, here it is written about unlocking
Motorola Moto G (2013) - Firmware (Post xLGSx # 27050449)


Motorola Moto G (2nd Gen) - Official firmware (Glebvz Post # 35130119)

Post has been editedNokPda-DE - 06.10.18, 14:10

[Mindsurfer]

Interested in a file with a working modem

[silentMS]

Nowhere I saw the results of polls or something like that, what firmware is the fastest and stable? Please tell by experience

[NokPda-DE]

silentMS, 1GB of memory for today's android little smart is already out of date, I gave my long ago to my mother, permanent problems with lack of memory, cleaning does not help, the apk just "grew" and there is no point in modifying it. I think in his case Andr 5 will be the optimal solution.

Post has been editedNokPda-DE - 13.10.18, 09:48

[silentMS]

And 6 android how? Not better

[NokPda-DE]

silentMSmay be better, but ik Smart was originally sharpened by 5 issued this assumption

[tamik07]

Help me figure it out, the phone after launching an attempt hangs on the window launching Android and optimizing 140 applications in it, if it waits for a very long time to optimize them all) and everything starts on a new one, the firmware has not been installed, nothing has been installed

[exf_eighternal]

tamik07As far as I know, this can happen if you clear dalvik cache via recovery or use pens to delete files in / data / dalvik-cache (if you have root). Did any of this happen? Is it not worth the application that makes cleaning the system?

[NokPda-DE]

tamik07If the SD card is installed as an extension of the internal memory (where the APC is stored on the SD card), then change the SD card

[tamik07]

NokPda-DE,Thanks, at the end, I pulled out the sd card and made a reset to the factory settings

[Life69]

Kind.
xt 1072 loader closed. 6.0
Tell me how, what to flash it with, and I do not see firmware in the header under it.
Thank you.

[NokPda-DE]

Life69Is this a LTE version if I'm not mistaken? Look for your firmware in the directories, if you find something with the utility from Glebvz, seite-matter for 15 minutes
http: //www.filefactory...ed&order=DESC&show=100
Motorola Moto G (2nd Gen) - Official firmware (Glebvz Post # 47023460)

Post has been editedNokPda-DE - 27.03.19, 19:07

[Life69]

NokPda-DE @ 03/27/19 20:01

Life69, is it a LTE version, if I'm not mistaken? Look for your firmware in the directories, if you find it, use Glebvz utility to sew-matter for 15 minutes
http: //www.filefactory...ed&order=DESC&show=100
Motorola Moto G (2nd Gen) - Official firmware (Glebvz Post # 47023460)

Spsb. Yes, lte, is the bootloader open or not, does it matter?

[NokPda-DE]

Life69It has, therefore, given you the version of the utility for the closed bootloader.
Here is the instructions for use
Unpack it in any place on your computer. In the middle of the folder unpack the desired firmware for your subject. Connect your subject to the BB in bootloader mode (the drivers are naturally already installed). Run the file "updater". Wait until it is sewn, at the end it will go to reboot itself. Use!

Post has been editedNokPda-DE - 28.03.19, 16:05

[Life69]

NokPda-DE @ 03.28.19, 17:03

It has, therefore, you and gave the version of the utility for the closed loader.

Thank you, already figured out) and sewed up)