[X]Assistant

[Matrixnet]

FirmwareE5372 (Megaphone MR100-3, MTS 823F, 826FT)
Discussion пїЅ | Firmware

• In the subject are allForum Rulesand10 commandments novice who is hard to master the Rules of the Forum
  
• The topic discusses the firmware itself. All other questions must be asked in the discussion thread of the device.
  
• To compare the device with other models and on the choice, refer to the topic.Selection and comparison of wireless modems and mobile routers
  
• Unlock codes for the device are requested in the topicHere you can get device unlock codes for FREE.
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the "Complaint" button under the message where you were helped, and write a thank you.
  
• Useful topics to note:Forum FAQ, How to search the forum?
  

Firmware

Firmware

Patched firmware from Raider3
Modified firmware 21.290.23.00.00
Megaphone
21.236.03.01.209: E5372_Update_21.236.03.01.209.exe(71.91 MB)
21.236.03.02.209: MR100_3_Update_21.236.03.02.209.exe(71.91 MB)

MTS
21.236.03.00.143: E5372_Update_21.236.03.00.143.exe(71.92 MB)

Vodafone
v.3.1:R215MobileWifiFirmware_v3.1.exe(85.08 MB)

Indonesia Bolt
21.271.11.00.1151 (rollback to other firmware from it to do through Huawei Flasher and firmware from Vodafone R215):E5372s.FwIndo.21.271.11.00.1151_Indonesia Bolt.exe(73.43 MB)


Only for E5372s-601modifications!Use with WEBUI 15.100.10.01.1260
Vaynakh Telecom
21.270.13.01.1260: E5372s-601TCPU-V200R001B270D13SP01C1260_RussianFederation_operatorValue_05012NNN_AsanFile.Com.zip(77.41 MB)

Web UI

Megaphone
21.236.03.01.209: Update_WEBUI_13.100.08.01.209_E5_V7R1_V3R2.exe(29.46 MB)
21.236.03.02.209: Update_WEBUI_13.100.08.02.209_E5_V7R1_V3R2.exe(29.99 MB)

MTS
21.236.03.00.143: Update_WEBUI_13.100.08.00.143_E5_V7R1_V3R2.exe(29.57 MB)

Global (generic non-brand)
13.100.07.00.838 (Arabic and English only):Huawei_E5372_WebUI_DashBoard_Update_13.100.07.00.838.rar(19.38 MB)
15.100.10.00.03 (oriented on 21.270.xxx firmware, it may not work correctly on older ones):E5372_Update_WEBUI_15.100.10.00.03.exe(37.07 MB)

15.100.10.01.1260 E5372sWEBUI-V100R005B100D10SP01C1260_RussianFederation_operatorValue_05012NNQ_AsanFile.Com.zip(33.76 MB)

Firmware for Huawei Flasher v2

E5372

boot from 21.270.13.00.00 Universal with adb and init.d enabled:

E5372s-22

boot from 21.236.03.00.143 with adb enabled:boot.zip(3.09 MB)

E5372s-32

boot from 21.236.03.01.209 with adb enabled:boot.zip(3.09 MB)
boot from 21.236.03.02.209 with adb enabled:boot.zip(3.09 MB)
boot from 21.27X.11.00.1151 with adb enabled:boot.zip(3.09 MB)
boot from 21.270.09.00.00 with adb enabled:boot.zip(3.09 MB)

21.236.03.01.209 Megafon
21.236.03.02.209 Megafon
21.236.03.00.143 MTS
21.270.09.00.00 Universal
21.270.13.00.00 Universal

R215 Vodafone

R215 Mobile Wifi Firmware v3.0 from Vodafone:R215 MobileWifi Firmware v3.0.zip(38.04 MB)
R215 Mobile Wifi Firmware v3.1 from Vodafone:R215MobileWifiFirmware_v3.1.zip(38.04 MB)

Programs

Huawei Flasher v2:Huawei_Flasher_v2.exe(162.5 KB)

RKwinToolsMod (boot.img modification):RKwinToolsMod_v2_6.zip(7.57 MB)

Open source

Programs compiled for Android

Samba 3.5.9samba.zip(44.22 MB)
Samba 3.6.24Samba_3.6.24.zip(48.01 MB)
Samba 3.5.22 and 3.6.25 (/ mnt / sd - / mnt / root) - (2.0 Beta 1)Samba.zip
BusyBox 1.23.1busybox-1.23.1.tar.gz(1.14 MB)

Information downloaded from the device

config.gz of 21.236.03.01.209:config.gz(9.45 KB)
mounts:mounts.txt(564 bytes)
cpuinfo:cpuinfo.txt(266 bytes)
mtd:mtd.txt(270 bytes)
partitions:partitions.txt(306 bytes)
meminfo:meminfo.txt(924 bytes)
df:df.txt(347 bytes)

Useful posts

Determine the country and operator by the version of Router modem firmware
Huawei E5372 - Yota
Enabling Linux Shell in Huawei E5372, the same but automated (original version),
[PowerShell] Automated software of 'Change of IMEI', 'A-Shell', 'adb' and 'TTL' for Huawei E5372 "
Change the factory SSID and WiFi password
Flash code
Restoring a modem after unsuccessful firmware boot
Instructions for BootRom downgrade with a digital signature on firmware 290.21 and 290.23
Google DNS servers given to clients
Guide for installing and lifting OpenVPN!

Polls

Poll number 1:

A warning:
1) A new firmware for Huawei E5372 version 21.290.21.00.00 and WebUI 17.100.08.00.03 has been released, the Digital Signature verification has been implemented in the new firmware (i.e., it will be rolled back from this firmware or the Custom firmware will not work due to the lack of signatures).
NEW Instructions for BootRom downgrade with a digital signature on firmware 290.21 and 290.23
2) Before asking a question, use the search and study the topic header. I putin reputation without warning and response. Save your and our most important time. Thank you for understanding

Post has been editedMatrixnet - 31.05.18, 20:57

Reason for editing: useful posts

[creativ45]

Is it possible to upload a boot from 21.236.03.02.209 to the standard firmware from huawei 21.270.09.00.778?

[Matrixnet]

creativ45,It is not desirable, if there is a firmware itself for that, I will correct the core, it will take all 10 minutes. 270 I did not study the firmware and I do not know what is behind the android and what is the kernel. Unfortunately, the kernels are different, only the native firmware is necessary or rollback to 21.136.02.209

Whoever wants can test samba, I have already started to build a new version. Samba 3.6.24 is the last of the Samba 3 line.
I have already collected a trial version. And added libs from the new compiler. Let's see what she will give

Post has been editedMatrixnet - 17.11.14, 11:54

[vorphalack]

in general, samba, that-som, that's nice, but here I thought about how to stick openVPN here and hang. ok compile and enclosea pigBinary is not a problem. but how to make it draw on the screen and / or at least in the webmord ...

[saintonotole]

vorphalack,With a screen in general, darkness, with a web-muzzle, all its resources are in the same folder, if you figure out how it is written there, add your module :) until it turns out not very.

[krawazog]

Of course, I apologize, but for what ext2? She, in our case, will not give any advantages. It is not journaling (it would not be appropriate to use journaling here). It is less fragmented, but it is more important for mechanical drives, which have to pull the "comb". Why add an extra module to the kernel, especially since it makes access to the SD from the same Windows at least problematic. Why not confine the same vfat?

About samba. That, of course, is a good thing. But whether it will increase the expense of the already not very capacious battery? If it was possible to turn samba on and off with the help of the display device and the device buttons ... So that it does not consume the charge, it is not needed yet.

Dlna here, perhaps, is needed as a turbine to a steam train. This thing is very resource intensive. It does not just quickly devour the battery, but also overheat the device. Still, it is not designed for such applications.

PS: Maybe that’s why the Chinese didn’t put there either a samba or, especially, dlna ...

[saintonotole]

[email protected], 17:39

PS: Maybe that’s why the Chinese didn’t put there either a samba or, especially, dlna ...

The fact of the matter is that the management of dlna was put in the admin area, and it is possible that in some local firmware there was a binary for it.

[vorphalack]

saintonotole
Yes, the screen is clearly something for a reason. that is, the XML is clearly affecting him, I saw, but there is some kind of completely obscene cross-reference similar to it.
Yes, and with a webmord, damn it, it's sad - I'm still not a pogromist, and not even a webdesigner :(

krawazog,
ext2 will not provide benefits as such, but if we add additional software to the firmware, it will at least not damage it. hardlinks, symlinks, this is all, there is no such thing on different FATs.

Post has been editedvorphalack - 17.11.14, 17:45

[saintonotole]

[email protected], 17:45

but there is some kind of obscene cotovasia cross-links it seems

There are just some id functions that are not declared anywhere in these xml. And finding out where they refer is also problematic. I would not refuse at least the hardware switch 2g / 3g / 4g.

[vorphalack]

saintonotole
not even in the functions of the case, it seems somehow determines what and how to show it in the menu. but I also would not refuse the switch. on the other hand, through MDMA we put in 3G + 4G and do not bother.

[saintonotole]

[email protected], 18:18

on the other hand, through MDMA we put in 3G + 4G and do not bother

I sometimes need to switch to 2g or auto when there is food on the highway, and after that 3g + 4g can not be returned without being connected to a pc / laptop, which I don’t carry with me.

[email protected], 18:18

it seems to somehow determine what and how to show in the menu

I at the same time our local firmware and vodafonovskaya. Where we show the repeater mode, the waterbod has a “fast download” with the same identifier.
UPD. Now I have flooded the Vodafon menu into the Mtsov firmware. A 2.4 / 5GHz switch appeared, which was not visible at all on the Vodafon switch, and when you click on fast startup, wps is turned on.

Post has been editedsaintonotole - 17.11.14, 18:30

[vorphalack]

saintonotoleBy the way, how much more vodafonovskaya written menu?

[saintonotole]

vorphalack,Yes, it is written in exactly the same way (only fastboot is entered instead of WPS), only because of the other binary oled other items are not visible.

[vorphalack]

saintonotole, it turns out that the menu is this one here is a crazy binary?

But in general, I talked about the clarity of the code webmord said more

[saintonotole]

[email protected], 19:06

Is the menu this one's a crazy binary?

Something like that. He alone refers to menue.xml

[email protected], 19:06

I talked about the clarity of the code webmorda more

And in vodafonovskuyu face I did not climb too much. Configs like the same as in Europe, and I do not understand html / css / js.

[vorphalack]

saintonotole
hmm and tried to compare different menue.xml with each other?

[saintonotole]

vorphalack,tried it. The difference is only in one point (the one that is WPS or fastboot), and there it differs only in the presence of a check mark, and in the text.

[saintonotole]

vorphalack,theoretically, there are two options. The first is to disassemble this binary, and see what other functions there are, besides those that are twitching from the factory hml. The second is to add a dummy list to the list with an id search in order. Maybe something can be fished.
UPD. the second option disappears, if the wrong id is observed in xml, then the whole menu disappears

Post has been editedsaintonotole - 17.11.14, 20:29

[vorphalack]

saintonotolethis and plus I have a feeling that it will be easier to figure out what functions the cellular part is kicking and rewrite the webmord from scratch. The only thing that is a pity is that the 4G MODEM mode is not to be added.

(with Wi-Fi it is clear - the wl utility does everything, you can draw a string around it quite for yourself)

[911]

Write pliz firmware order boot c adb. It is necessary to enter the modem into boot mode from the program itself or not (the port is determined by this, the drivers are installed, the megaphone modem hangs on the modem, I open the file with the boot and everything, the flasher hangs with a stake. I tried on xp, the seven and eight, the result is one - the program hangs dead). Modem Megaphone MR100-3 (E5372), firmware 21.236.03.02.209, web muzzle 13.100.08.02.209

[saintonotole]

911,check if the com port in the flasher matches the real one after transferring to dm:Huawei E5372 (Megaphone MR100-3, MTS 823F, 826FT) - Discussion (Post # 35806596)