HP Split 13 x2 - Discussion | [tabletpc] Windows 8.1 | 13.3 '' | Intel Pentium i3-i5 | 2-4GB RAM
Zenano @ 11.02.2015, 18:47
tell me how to turn on mode n wifi adapter settings?
himself answer. Register corrected in this article:
http: //www.nextwindows...primere-windows-8.html
now contains the properties of the rate adapter 72 mb (it was 56). Net became faster. But how to do 150 - I do not know
I changed the adapter, the one that came with your tablet frank guano.
I put the intel 7260 wifi + BT
Speed ​​150-270 5 meters from the router
I put the intel 7260 wifi + BT
Speed ​​150-270 5 meters from the router
$ 20 adapter. He replaced himself. It understands the tablet is very easy. Only remove the back cover and replace vayfay adapter.
LukasAddon @ 12.02.2015, 10:12
intel 7260 wifi + BT
and you might have some additional characteristics supporting? so I know how to buy in the internet. Because that's why the title crawl out different devices, including pci
I ask to follow the link
intel 7260
these adapters 4-5 modifications. there is even a vayfay 800 megabits.
intel 7260
these adapters 4-5 modifications. there is even a vayfay 800 megabits.
Such a question, I have HP Split m010dx x2
I disassembled dock
there is a compartment for the hard disk
I found a slot on the same board where HDMI and USB 3.0
on the back side (looking at the keyboard connector side, just can not see it)
photo spread connector
I have this idea
choose the SATA cable with a connector on the other models
because the very part number 732279-001, called Hard Drive Hardware Kit (includes cable, cover, and screws) can not find any on ebay, or at ali, any taobao ...
in the photo is marked as CN6, it is this true?
help identify the connector did not measure up than
20 contacts, the connection is carried out perpendicular to the board, the dimensions are comparable to the USB connector
It is also interested in this one connector was found on board the right side of the touchpad
connection side, a hinged clip, the contact 4
Post has been edited_AVB_ - 21.02.15, 17:38
I disassembled dock
there is a compartment for the hard disk
I found a slot on the same board where HDMI and USB 3.0
on the back side (looking at the keyboard connector side, just can not see it)
photo spread connector
I have this idea
choose the SATA cable with a connector on the other models
because the very part number 732279-001, called Hard Drive Hardware Kit (includes cable, cover, and screws) can not find any on ebay, or at ali, any taobao ...
in the photo is marked as CN6, it is this true?
help identify the connector did not measure up than
20 contacts, the connection is carried out perpendicular to the board, the dimensions are comparable to the USB connector
 |
It is also interested in this one connector was found on board the right side of the touchpad
connection side, a hinged clip, the contact 4
 |
Post has been edited_AVB_ - 21.02.15, 17:38
_AVB_ @ 21.02.2015, 17:37
732279-001
http://www.amazon.com/...WARE-KIT/dp/B00IY1EFMQ
HP sells all of its parts on amazon if any more are available. True delivery with Amazon will dearly. And what is different from your m010 m101?
Separately, the question remained one program to update the BIOS on m101er (m101 is, because in the version under a different processor (i3)). She was in a section of the drivers on site hp, is now the site has changed and the driver for our nouta there at all
doom118 @ 21.02.2015, 17:06
And what is different from your m010 m101?
100ya series mud on 4xxx generation percent (Haswell)
my on Ivy Bridge
program is not
for $ 57 to buy as it is not kosher))
I presented the idea
find a cable with the same connector, I'm sure that there are other models, wire length can hardly different ito ...
such things are usually universal, will not do the same for each model nouta new connector and cable
Post has been edited_AVB_ - 21.02.15, 19:12
You have to go into service on the new laptop and pick up on their dismantling.
Unfortunately in my Dock connector is not soldered.
Posted on 21/02/2015, 21:59:
by proca BIOS does not depend only on the tablet series.
And smart firmware will not sew if not suitable.
Unfortunately in my Dock connector is not soldered.
Posted on 21/02/2015, 21:59:
doom118 @ 21.02.2015, 18:06
Separately, the question remained one program to update the BIOS on m101er (m101 is, because in the version under a different processor (i3)). She was in a section of the drivers on site hp, is now the site has changed and the driver for our nouta there at all
by proca BIOS does not depend only on the tablet series.
And smart firmware will not sew if not suitable.
I take almost half a year
today changed firewood (flew) and bluetooth on several occasions included a gun for hdmi. As a result, Total comander font became very clear and readable. Before that was the dregs -nothing could do. It's like a video firewood differently earned, or what could be funny?
today changed firewood (flew) and bluetooth on several occasions included a gun for hdmi. As a result, Total comander font became very clear and readable. Before that was the dregs -nothing could do. It's like a video firewood differently earned, or what could be funny?
Yesterday was the proud owner of HP Split 13-m100er x2. The device is excellent. Immediately updated to Windows 8.1, set up a memory stick to install programs on it.
SVladimir80 @ 01.03.2015, 09:05
Tell me what is the maximum amount msata ssd, can be inserted?
As such restrictions, except for size, no.
Put even terabytes)))
My modification i3-4010Y / 240G / 8G.
A photo
Post has been editedSVladimir80 - 03.03.15, 19:39
A photo
Attached images
 |
Post has been editedSVladimir80 - 03.03.15, 19:39
Yesterday was the proud owner of HP Split 13-m100er x2. The device is excellent. Immediately updated to Windows 8.1, set up a memory stick to install programs on it.
and he happened to your hard drive in the docking station?
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement