Chuwi V89 - Discussion | [tabletpc] Windows 8.1 | 8.9 "| Intel Z3735F 1.83GHz | 2GB RAM



Rep: (15)
PictureChuwi v89
Description| Discussion пїЅ | Purchase " | Accessories В» | Firmware " | A source of information
Windows 8-8.1 пїЅ | Windows 10 пїЅ | Windows RT and software пїЅ | Games for tablets on Intel Bay Trail пїЅ | Windows 7 пїЅ | Ubuntu linux пїЅ | Change the operating system пїЅ | Search programs пїЅ | Antivirus пїЅ | Ambulance laptop owners пїЅ | IT smoker пїЅ | Operating systems and software

Attached Image

Official site
Specifications:
Model: V89
White colour
Operating system: Windows 8.1
Screen size: 8.9 inches IPS (16: 9 ratio)
Resolution: Full HD 1920 * 1200 (Samsung Retina)
Multitouch: Capacitive 10-touch
Processor: Quad-Core Intel Z3735F 1.83 GHz
RAM: 2Gb DDR3
Graphics: Intel HD Graphics 7th generation
Built-in memory: 32 / 64Gb (eMMC)
Front camera: 2 megapixel
Rear camera: 5 megapixel
Support:
- Wifi: Yes, 802.11 b / g / n
- Built-in 3G: WCDMA - 900 / 2100MHz (2G: GSM - 900 / 1800MHz)
- Bluetooth: 4.0
- GPS
- SD cards: up to 64Gb
- OTG
- G-Sensor
Connectors: 1x Micro USB, 1x Micro SD, 1x Micro SIM, 3.5mm-jack
Battery: 6400mAh
Speakers: Stereo (ACC)
Dimensions: 233.2 * 148.2 * 8 mm (weight 445 g)
Additional Information:
Additional photos
Attached Image
Attached Image
Attached Image
Attached Image

Any utility
- A source of information:http://bbs.chuwi.com/forum.php(but for comfortable use, it is advisable to insert this link into Google search and select “translate page”) just set “v89” to the site search.
P.S: antivirus constantly swears at this site.
- Drivers for Windows 8.1 x86:http://my-files.ru/6j2f39
- BIOS:http://my-files.ru/gjzz4z
- Official build of Windows 8.1 x86 Bing with pre-installed drivers and Office 365:https://yadi.sk/d/3f0W0kgDdrhmx
Detailed instructions for installing Windows 8.1
1. Format the USB flash drive in fat32 or, be sure to rename it to "Winpe" (without quotes).
2. Download and unpack the archive, the contents of the folder "S895_F_3_CHUWI_EN & ZH & HK_NO_WW41_V1.0.7.T" are copied to the USB flash drive.
3. Make sure that the tablet does not have a microSD card, connect the USB flash drive and keyboard to the tablet via a hub (not necessarily with power).
4. Turn on the tablet and press ESC until you get to the choice.
5. In the menu, click "Boot Manager" and select "EFI USB Device (General USB Flash Disk)" - this is our flash drive - press Enter, it will boot from the flash drive.
6. At the end of the installation, the computer should turn itself off, remove the flash drive and turn on the tablet - configuration will go. At some point, you can choose English language.

Recommendation: after formatting the flash drive, open "Control Panel \ Administrative Tools \ Computer Management \ Disk Management" and look for the partition on the flash drive to be marked "Active", if not, make it that way (right mouse button - make it active).


SOLVING THE PROBLEM OF JOINT WORK WiFi and Bluetooth


Making of 5 fingers 10
As it turned out, the drivers for the 5-point multitouch are installed from the factory, and the panel itself works with 10 touches, then this bug can be eliminated at the request of the owner.
Link to the driver for the touchscreen:https://yadi.sk/d/2EnQCbUQdqTiG
Instruction:
- unpack the archive;
- go to the task manager and select: HID devices ->KMDF HID Minidriver for Touch i2c;
- in the driver tab click update ->find drivers on this computer ->and select the folder with the drivers.

When installing drivers, the touchscreen will be temporarily disabled, but at the end of the process everything should work.


Prog for SMS


Turn off sleep mode for Windows (turn on hibernation by default


Enabling full hibernation


Installing Dualboot on the tablet

Instructions with files from sanir76:
Chuwi v89
Archive with full firmware for CHUWI V89 64Gb DualBOOT. Instructions in Russian are present inside:ChuwiV89
Or one more:
Files for firmware:
https://yadi.sk/d/vCnQBrBEfxHDL
Files for 32GB version:
Chuwi v89
Instructions on firmware (the links information is similar, but complements each other):
Chuwi v89
Chuwi v89


Switch from DualOS to SingleOS


option to get Root rights for Android


Running GPS from under Windows (complete instructions with all links
Updated version (fewer problems):Chuwi v89
Initial option:Chuwi v89


Connecting the tablet to the TV (with video, TV - LG


Template of the protective film on the tablet (Luxcase universal film for cutting according to the template)
Chuwi v89
Instruction:Chuwi v89


Solving the problem with the time difference in Win and Android


Repartitioning the size of partitions for Android
By default, 10GB is allocated for android, but you can do more or less
Chuwi v89
For advanced users, there is a batch file for creating a partition.tbl file:
Chuwi v89


Increase productivity in android games


Xposed to Chuwi v89 (Intel x86) works!


Disassembly + photo of the entrails


Simultaneous charging and working with devices (hub scheme)


How to remove Android?


Rolling back the touchscreen drivers to the factory ones, if it doesn't work, or there are phantom clicks (after replacing the touch / update of the Windows drivers)


The tablet does not turn on, it is heated on charging. Short circuit power (successful repair of the power circuit)



Post has been editedMaksim UA - 13.03.19, 17:36
Reason for editing: upd



Rep: (15)
Curiosity took over, and I did a brutal autopsy. So say for lovers of guts.
Broken according to this scheme:
- unleash 4 torx on the sides of the case (bit for Torx T5);
- With something thin (preferably thinner than a bank card or similar cards), open the back cover.
By the way, in terms of the stiffness of the back cover, it seems that not thin glass is glued on it (in fact, there is something stuck on a plastic base, is it glass?).
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

I also found the disassembly of this tablet on a Chinese website:http://www.it.com.cn/p…014111709/1153940.html

Post has been editedctich - 14.03.15, 21:06
Reason for editing: spoiler



Rep: (-7)
Explain what is under the battery? those. from above if on 1yu a picture to see.
Maksim , spoiler forgot.



Rep: (15)
Eddddddy @ 12.26.2014, 10:46*
Explain what is under the battery? those. from above if on 1yu a picture to see.

Just there I did not climb (it was well sealed), but there the loop goes to the matrix, or to the touchscreen. Hike there is a controller, I also did not see the Wi-Fi antenna, it was there too. Yes, and in the Chinese pics there is nothing special to see.
There is some kind of chain for the matrix, I did not particularly look closely.

Post has been editedMaksim UA - 26.12.14, 15:04



Rep: (3)
Hello to all owners, I own Onda v891w myself, but I really don’t like the quality of the screen (plastic crystallizes very much). What image quality do you have? Is OGS (as indicated by one of the sellers)?



Rep: (15)
* bambus1980
Did not quite understand what is meant by the phrasevery strongly crystallizes. And so the image is quite decent, good IPS matrix. But this is definitely not OGS, under OGS, the Chinese seem to mean that the tablet is covered with glass on both sides.



Rep: (3)
Maksim UA @ 12/30/2014, 5:41 PM*
I did not quite understand what was meant by the phrase very strongly crystallizes. And so the image is quite decent, good IPS matrix. But this is definitely not OGS, under OGS, the Chinese seem to mean that the tablet is covered with glass on both sides.

OGS can not be connected with the back cover of the tablet, because this is no longer part of the screen, even by the Chinese. But once called OGS, then perhaps at least with the naked eye, such a feeling should arise. On Onda, this is clearly not OGS. The layer is quite significant - about 2mm. of air. And crystallization means that near the screen for half a meter and below you can see that instead of white color there is colored crumb, as if looking through tulle or very fine gauze. This does not interfere with the work, but to boast a cool planet will not work. Yes, and not so nice from such a screen.

Post has been editedbambus1980 - 04.01.15, 16:51



Rep: (15)
* bambus1980
At the office. The site says something like this (translated from Chinese):
OGS coating material, AF-coating; and in a separate line describes the screen, and there is already written IPS.
Well, as I wrote earlier - this is definitely not an OGS screen.



Rep: (7)
But my only rolled up here. I'll go to the post office .. almost 2 months on the road ..



Rep: (7)
Well, the assembly can not say anything bad. The battery from the first watchmaker keeps well. in the raena of the memory card, the back plastic glossy cover does not hold onto anything and, accordingly, creaks when flattening) but it is purple to me)
The screen for such money is even cooler than I expected. Touch in the sun visible. More precisely its layout. BUT if you buy a device for yourself, I'm still satisfied with all 90%. 10% margin on the future tablet on Windows)))

By the way, it was immediately English. I did not change to Russian as unnecessary. The office started, the window came out in Chinese. While xs what to do with it. Apparently it's easier to put the good old 2003 office with a plugin for modern formats. smartly, quickly, 99% of me on all computers are satisfied to this day without problems ..

Post has been editedzip43r - 05.01.15, 15:54



Rep: (7)
Who has how much time it charges? I have a bad connector or plug .. from the Samsung cable is charged by the percentage in 15 minutes ...
and the red LED blinks while charging. Is this the norm?



Rep: (9)
Today I also received at the post office. It seems everything works, even 3g Internet. Simka inserted on the included tablet, the Internet immediately earned without rebooting, shows 21 Mbps. The Chinese have set English, but the hieroglyphs are found.



Rep: (9)
Tell me where to download the driver for our Chuwi V89?
I want to reinstall Windows to get rid of the Chinese completely ...



Rep: (15)
Who has how much time it charges? I have a bad connector or plug .. from the Samsung cable is charged by the percentage in 15 minutes ... and the red LED blinks during charging. Is this the norm?

Today I checked that it took 4 and a half hours to fully charge in the sleep state (on a standard charge and cable).
tumbrace @ 01/06/2015, 15:50*
Tell me where to download the driver for our Chuwi V89?

I was looking for it myself, so it would have been pure, but I could not find it. I think you need to mail to the Chinese on the site to write, or search in their forums. But you can try to pick up in parts, in the BIOS, like all devices with markings are registered.



Rep: (15)
And here are the drivers (and a lot of interesting things). I found some kind of forum on firmware on the site of the firmware, etc., and there is also firewood, and the standard, bios is visible, and I saw something about the android on our beast.
Link to China, shakes a long time:
http://pan.baidu.com/s…50923625&uk=3257801393
Verification code, if asked, - mckm
P.S .: It doesn’t download my driver, the download costs 0%. If someone jumps, throw off somewhere (for example Yandex disk).

Post has been editedMaksim UA - 06.01.15, 21:00



Rep: (9)
I managed to download the driver during the day and reload it here:tyts

Unfortunately, I also now have Chinesethe sourcedoes not shake - I wanted Windows to download and reinstall but no)))
And then the Windows build from the next branch to my CHUWI V89 gives an error and does not install ...



Rep: (9)
BIOS - also managed to download and reloadhere



Rep: (15)
* tumbrace,
And about the visible, I think that you can download from the Microsoft site, and immediately in Russian. And since it is not necessary to register on screens less than 9 ", it should become so.
I'll also try to download drivers on Windows 10, maybe instead of 8, I'll write down the top ten for the test.



Rep: (9)
Maksim UA @ 01/07/2015 10:57*
Microsoft can download

Regarding the download of Microsoft - I do not know how this is possible.
I try to put the assembly on our little animal now from the next branch
from here:tyts
and then roll the driver



Rep: (9)
In general, with the assembly of Windows from the next branch does not work.

It installs everything fine, but then I can not install the driver and at some point everything hangs tight.
You have to turn off while holding the power button (about 10 seconds)
And then when reloading it hangs (the update circle is spinning constantly and does not go any further)

I tried 2 times to install - the same result ..
It is necessary to find a way to install a driver from a .bat file on our drivers, otherwise I don’t know how to install them



Rep: (15)
* tumbrace,
I probably do not understand well, but there are a couple of questions. After recording, it does not start, but hangs on the download, or how? I just unpacked the archive with the drivers, and I saw that there is no autorun, but there is no possibility to go into the device manager, and install firewood for each device from it?


Full version    

Help     rules

Now: 06/27/19, 10:54