[X]Assistant

[shturrm]

LG G3 - Unofficial drain-based firmware (OS 4.4.2 - 6.0)
LG-F400S, LG-F400K, LG-F400L, LG-D850, LG-D851, LG-D852, LG-D855, LG LS990, LG-VS985
Description | Discussion пїЅ | F.A.Q | Purchase пїЅ | Marriage пїЅ | Accesories пїЅ | Talk autonomy пїЅ | Club LG G3 (breaker) пїЅ | Official firmware (OS 4.4.2 - 6.0) пїЅ | Unofficial firmware based on the drain (OS 4.4.2 - 6.0) пїЅ | Lineage OS and AOSP (OS 5.1 - 7.1) пїЅ | Custom kernels пїЅ | Modifications and decorations пїЅ

Important information

Attention!!!

To install "Fulmics ROM" version TWRP can not be higher than "3.0.0-0"! On older versions, we get the error:
ApplyParsedPerms: chown of /system/etc/install-recovery.sh to 0 failed: Operation not permitted and set_metadata_recursive: some changes failed

All that you do with your phone - you do at your own risk! If you do not know how to do something - better do nothing! You can get a brick from your phone !!! Think about whether you need it ..
This topic discusses issues related to the installation of custom firmware, their discussion, and the elimination of problems encountered during and after the firmware. To discuss the modification of the firmware thereseparate topic! The topic is allowed only links to any modifications with a description.
I strongly recommend making backups before any firmware!
If your phone restarts, do notneed to ask here why! The first thing you need to do - use the search in this topic, as well as in the topicDiscussionsor change battery

Drivers and Utilities

LG drivers
ADB Driver Installer
LG Support Tool

Getting Root and Installing Recovery

Getting Root

Utility for getting Root and installing TWRP on Android 4.4.2 - 5.0 (does not work on v20p)
Autorec for D856 on Lollipop
Root for KitKat using Stump Root v1.2.0
PurpleDrake LITE R03
If TWRP is not installed on a rudimentary Lolipop device, using Autorec (Flash button is not active and does not respond to pressing)

Installation Recovery

How to enter recovery
How to install TWRP
Installing TWRP on Lollipop from the device itself
Different versions of TWRP
Installing BUMP TWRP on KitKat

Marshmallow based firmware

D850 (AT & T)

Fulmics rom
Marshmallow port with D855

D851 (T-Mobile)

Fulmics rom
Marshmallow port with D855

D852 (Canadian)

Fulmics rom
Marshmallow port with D855

D855 (International)

Fulmics rom
Tekcafe ROM v3.5 - STOCK UX4 v30g
LIMITLESS STOCK XDA
N & N 8.0 ROM
N & N Zero
UNIQ ROM
TIZEN ROM MARSHMALLOW G3 VARIANT PORT G5 APP D855V30F
N & N ULTRASLIM G5 ROM STYLE (30E)
Rails Royale Rom V5.0 FULL UX 5.0 [OFICIAL] [30A] [HILO 1]
G Plus 3.0 | AOSP STYLE | v30a | Marshmallow | D855 / D855P / D857 / D858HK / D859
[ROM] PRIMEG3_1.4_INSPIRED_G5_Full UX5

F400S / F400L / F400K (Korean)

Fulmics rom
Marshmallow port with D855

LS990 (Sprint)

Fulmics rom
Marshmallow port with D855

VS985 (Verizon)

Fulmics rom
Marshmallow port with D855

US990 (U.S. Cellular)

Fulmics rom
Marshmallow port with D855

Dual SIM and phone versions for the Chinese market

D856 (Dual Sim LTE)

Fulmics rom

D857 (Dual Sim TD-LTE)

G Plus 3.0 | AOSP STYLE | v30a | Marshmallow | D855 / D855P / D857 / D858HK / D859Fulmics rom

D858 (Dual Sim 4G LTE)

Fulmics rom

D859 (China Mobile Dual Sim LTE)

G Plus 3.0 | AOSP STYLE | v30a | Marshmallow | D855 / D855P / D857 / D858HK / D859
Fulmics rom
G Plus 3.0 | AOSP STYLE | v30a | Marshmallow | D855 / D855P / D857 / D858HK / D859

D859 (China Telecom Dual Sim TD-LTE)

Fulmics rom

LOLLIPOP and KITKAT firmware

LOLLIPOP based firmware

D850 (AT & T) / D851 (T-Mobile) / D852 (Canadian) / F400S / F400L / F400K (Korean)

DarkKnight
CloudyG3
Lionrom
Montary ROM
Fulmics rom

D855 (International)

DarkKnight
CloudyG3
Lionrom
Montary ROM
Fulmics rom
KNVIRUS ACURA ROM
Novastock ROM
Newrom
Chupa chups
AndroidNow HD
KNVirus
Krazee enerG3 Rom
Brazuca
NOVASTOCK AOSP STYLE

LS990 (Sprint)

DarkKnight
CloudyG3
PRIMEGSM (V7.1) {android 5.0.1}
Montary ROM
Fulmics rom

VS985 (Verizon)

DarkKnight
CloudyG3
Montary ROM
Fulmics rom

KITKAT based firmware

D850 (AT & T) / D851 (T-Mobile) / D852 (Canadian) / F400S / F400L / F400K (Korean) / VS985 (Verizon)

MIUI7

D855 (International)

MIUI7
ANDROID NOW HD v2.4
CloudyG3 1.2

LS990 (Sprint)

MIUI7
BarRin-ZV6 - Odexed & Deodexed-1-29-15 android 4.4.2

Add-ons, mods and patches

Multiboot
MultiROM v33d - multiboot mod(Update on 1/24/2017)
Dual Boot G3 (Analog Multiboot)
Speed ​​performance
Trotting mod
A set of scripts to speed up the work of Stock and Stock-based firmware (works on AOSP)
Energy saving
Disabling the process com.android.phone process action_chek_netstat - to save battery 6.0
Tweak to reduce battery consumption for Lollipop
Connection
LS 990UNLOCK + WI-FI Access Point, works exactly on ZV8 and ZVA
Fix to work Bluetooth
Fix to fix the lack of sound during calls
Record Lollipop calls for firmware based on stock
Modems for LG G3 d855
Change QCN file to another (problems with 2G 3G 4G)
Change of phone region to CIS (Russian dialer)
Patches / Fixes
Fix recording to internal memory in Lollipop
Fix write to USB flash drive for Lollipop and KitKat
Reset resolution and DPI
System
Current Xposed look in this thread.
Latest versions of Super SU
Enable init.d support and a collection of useful scripts
Camera mods and settings
Fix for shooting in FULLHD resolution with a frame rate of 60 FPS
HTC One M9 Camera Port
Lenovo Super Camera (Lollipop)

Inteface modification

Quick circle (no conflict with xposed, tested on Stock and AOSP)
Dvonilki port and contacts with G4
Enlarged photo on contact (base 20r)
30v dialer mod
Enlarged photo on the contact port G4
Change of phone region to CIS (Russian dialer)
LG QuickRemote for AOSP

Problem solving

LG G3 f400k: during a conversation, a parallel call fails (second line)
Error Set metadata recursive some changes failed
If TWRP is not installed on a rudimentary Lolipop device, using Autorec (Flash button is not active and does not respond to pressing)
Advice for successful installation of firmware
Solving the problem with a constant reboot in the recovery

Answers on questions

What is FAST DORMANCY?
Error Set metadata recursive some changes failed
Advice to successfully install the firmware
What is a bump?

Sources of firmware

XDA | HTCMANIA | LGVIET

Which firmware is better? / Screenshots of polls

Voting for the best firmware based on Android 6.0 flow (10/19/2016 - 12/3/2016)

Voting for the best firmware based on Android 6.0 flow (? - 10.19.2016)

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editeddraiv88 - 20.11.18, 22:31

Reason for editing: Editing header

[logosnv]

LeS76 @ 11/06/2014 02:01

There High Temperature Property to put ON, but rather, it will fly off after a reboot, I did not check

It will not fly if you do this:

1. Enter the code
3845 # * 855 # (for international models)

2. Scroll down to High Temperature Property OFF, and select this item
3. Turn it ON to ON ...
4. Turn off the phone completely ...
5. Wait at least 10 seconds.
6. Turn on the phone and wait 30 seconds or more until the screen is locked.

Everything. There are no lags!

NOTE If you have spoiled something, send a claim to / dev / null
NOTE2 cpu thermal throttling turns off - so if you play a lot of toys on your phone, you probably shouldn't turn it off.
Source post

Post has been editedblooddseeker - 06.11.14, 21:37

[scorpio90]

Who cares there is a program that changes the physical resolution of the screen is called nomone resolution changer
Xda thread
http: //forum.xda-devel...y-life-tweaks-t2806078

I myself played a little, I put the resolution of 1080x1920 and it really works, you just need to reduce ppi, put the flight to normal for 530 half an hour, but now I don’t have time to work at xda and they say that it helps to increase the battery life in English I can’t write what’s interesting

I do not consider the program from the embellishment, but I want to understand whether there is any effect in saving the charge from changing the resolution
If on the standard I have 400-600 MB of RAM, then at 1080p about 800-900 MB or is it buggy for me?

Post has been editedscorpio90 - 07.11.14, 19:41

[ShureGGG]

Poured on YaDiskAN_HD_2.4_V10N_D855_signedif anyone needs it.

Established, 15 minutes normal flight: D

[Les76]

Anonymous v2

In general, the light version .. KNVirus, only without glitches.
Removed extra gaps, there is a market. There is a T-action (not Russified). Battery holds well. 4G works with the firmware by selecting the appropriate item in the network settings. It seems that in all Spanish assemblies, when you re-enter the network settings, it resets to 2g / 2g.
Test camera without unnecessary priblud (in comparison with KNVirus), with a bunch of different settings. Fotka in certain modes super.
In general, a stable and decent lightweight mod, with good functionality and a minimum of bells and whistles.

Screenshots

Set after installation

The camera has a lot of settings, very pleased.

And further

Link to the firmware in the header

Post has been editedLes76 - 16.11.14, 00:15

[Warning050]

Gomer.85 @ 09.11.2014, 00:37

I don’t understand how to achieve such results with active use, but it doesn’t come out to get the same result. I have installed Viber, Vattsapp, Instagram, Kat (VKontakte), Mail (three boxes), Google sync, smart screen, auto brightness by 20% from 8 to 23 is the maximum that lived, usually the screen works for about 5 hours. It was about 5.5 hours on the firmware AN 2.1 (for me the duck is the most nimble and smooth firmware)
Ps Internet 50% of the time Wi Fi, the rest 4g and 3g.
But how can I get 50% of the charge by 20 00 I do not understand.

[hruak]

Actually, a link to the Bump site:clack.
You can, for example, bump the RIN kernel.
Transfer:

Q. What is this?
A. This is a bump! The simplest method for signing any images for most modern LG phones with a locked bootloader. Bump times, ship forever!

Q. How does it work?
A. Create an account on the site, click "Bump!", Upload kernel / recovery images there and rejoice.

Q. Is the project code open?
A. No, but the project itself is “open” - if possible, we will participate in discussions and post changelogs.

Q. I am a simple user, do I need a bump?
A. If you are only flashing firmware without changing anything in the kernel, recovery or ramdisk - no.

Q. How do I know that the kernel / recovery / firmware is already bumped?
A. Search for the words "bumped" or "signed" in the file name. Soon we will make a new section of the site where you can check the image for the presence of a bump.

Q. Ok, I'm a developer, and I WANT TO BUMP !!!!
A.

http://apps.codefi.re/bump

Please review the section "About", we have posted a FAQ in it.

Post has been editedhruak - 10.11.14, 19:25

[wolf.gridin]

RIN Kernel for D855 BUMPED boot.img(12.52 MB)


A small instruction on the firmware:
1.

пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ!!! download

On Custom there will be problems !!!
2.Download and installFlashify
3.Give root access
4.ChooseONLY BUMP boot.img
Boot image>Choose a file (choose kernel) ->Yup!
5.Reboot
6.Rejoice!

If someone is interested in a link toOriginal source

Post has been editedwolf.gridin - 11.11.14, 13:24

[ilya-fedin]

Support init.d

What is it?This is support for any user, including optimization scripts at boot!
Where can I get scripts?Well, for example, here:Scripts, tweaks, collect them all
Instruction:Sew through TWRP
Requirements:Demon su

Do I have a demon su?

Check is very easy! To do this, look at the contents of the /system/etc/install-recovery.sh file:

• If it contains the launch of the su daemon (daemon su), then you can safely start init.d support!
  
• If not, flash through TWRPSuperSU-v1.93_MOD.zip(1.1 MB)
  

Script library

Scripts must be with the rights 755 (letter P), begin with the sequence number (00, 01, 02, etc) and without extension.

1. Solving the problem with writing to the internal card^5.0:
   
   #! / system / bin / sh
   restorecon -v -R / data / media
   
   Patch for fast firmware via TWRP:internalsdfix.zip(137.96 KB)
   
   
2. ZipAlign:
   
   #! / system / bin / sh
   echo "++++ ZIP ALIGNMENT PROCESS STARTING ++++"
   LOG_FILE = / data / zipalign.log
   if [-e $ LOG_FILE]; then
   rm $ LOG_FILE;
   fi;
   
   echo "Starting DC Automatic ZipAlign $ (date +"% m-% d-% Y% H:% M:% S ")" | tee -a $ LOG_FILE;
   for apk in /data/app/*.apk; do
   zipalign -c 4 $ apk;
   ZIPCHECK = $ ?;
   if [$ ZIPCHECK -eq 1]; then
   echo ZipAligning $ (basename $ apk) | tee -a $ LOG_FILE;
   zipalign -f 4 $ apk / cache / $ (basename $ apk);
   if [-e / cache / $ (basename $ apk)]; then
   cp -f -p / cache / $ (basename $ apk) $ apk | tee -a $ LOG_FILE;
   rm / cache / $ (basename $ apk);
   else
   echo ZipAligning $ (basename $ apk) Failed DC | tee -a $ LOG_FILE;
   fi;
   else
   echo DCZipAlign already completed on $ apk | tee -a $ LOG_FILE;
   fi;
   done;
   echo "Automatic ZipAlign finished at $ (date +"% m-% d-% Y% H:% M:% S ")" | tee -a $ LOG_FILE;
   echo "++++ ZIP ALIGNMENT PROCESS FINISHED ++++"
   
   
3. Sysctl (increases energy savings): sysctl.zip(138.57 KB)
   
   
4. Color Management:
   
   #! / system / bin / sh
   
   echo "250 236 255">/sys/devices/platform/kcal_ctrl.0/kcal
   echo 1>/sys/devices/platform/kcal_ctrl.0/kcal_ctrl
   
   250 - red, 236 - green, 255 - blue
   thank gaich
   Author

Download: init.d-support.zip(137.89 KB)


Post has been editedilya-fedin - 18.03.15, 22:43

[wolf.gridin]

Rollback from Lollipop to KitKat

The easiest way of any rollback (downgrade) is the usual installation of the official firmware on the phone with FlashTool.
But if you have a custom recovery installed, then you can roll back with it.

Downgrade using FlashTool

Just install the firmware in the format.kzd using FlashTool 2014 in CSE Flash modeor.tot c using FlashTool 1.8.6 ... in BOARD DL mode.
Methods of firmware are suitable for all models of LG G3, taking into account the use of drivers and firmware for your model.

Downgrade with BUMP TWRP

Need firmware for recovery format.zipOr your own nandroid backup, which you had to do after installing the recovery.

• Restore KitKat's nandroid backup to TWRP, or install any new KitKat custom firmware, first by making Wipe: Data, System, Dalvik, Cache.
  If you installed TWRP with modem support, and made a backup along with the modem, then you can simply restore the backup, this will complete the rollback.
  
• Flash Kit Kat ModemKK-modem.zip(28.07 MB)
  
  
• Enjoy Kit Kat.

Post has been editedLes76 - 15.02.15, 16:22

[palaych]

AndroidNow HD 3.0 D855

Base V20A Lollipop

Changes

-Added Taskmenager with Widget!
- Adding Plug & Pop - fully customizable! (graphically designed for Lollipop)
- Rom has already ROOT
- Adding some applications from LG
- Update some google apps
- Removal of McAfee
- Unlock all applications for Splitwindow
- Addition FIX SD card

Installation

-Download zip
-Copy to sdcard
-FULL WIPE (Dalvik, Cache, System & Data)
-Flash zip
-Rebut

Screenshots

YaDisk
XDA
MEGA

If you suddenly decide to roll back to QC

LG G3 - Custom firmware (Post # 35657778)

Post has been editedpalaych - 11.11.14, 22:18

Reason for editing: Added screenshots

[shturrm]

How to reduce cell consumption mode. An 3.0. what to think of? I like the firmware ... But this network is eating .. About 40%

Post has been editedshturrm - 12.11.14, 17:38

[Zaknofein]

There was another custom firmware CarbonROM =)http: //forum.xda-devel…ial-carbonrom-t2937019

[shturrm]

Error fix

Warning! Current version is not available for user. Can't find matched for NT-code mmc / mnc [FFFFFF], subset [56]

Need to flash through TWRPfile(Mega)

Post has been editedshturrm - 12.05.15, 20:27

[shturrm]

CloudyG3 1.2
D855

Description

KitKat based firmware

Screenshots

not yet

Installation

- Download the archive and put it on a USB flash drive.
- Reboot Recovery
- Wipe all (except flash drive) & Format Data
Flash archive

Download:
Download

Post has been editedshturrm - 12.05.15, 20:06

[batogofff]

[email protected], 18:30

no no curtain no control buttons

I did this:
1. I made a wipe of everything except an SD card;
2. Immediately after this, made a factor reset;
3. I asked;
4. Immediately after the firmware did vamp Dalvik / Cache

After that, everything appeared)

[scorpio90]

[ROM] AndroidNow HD 3.2 [D855] [LRX21M V20A Lollipop]
theme -http: //forum.xda-devel...1-4-1-g3-d855-t2887669
references:
Yandex!

Google

Post has been editedscorpio90 - 13.11.14, 23:17

[moonrose]

Skin1980 posted a modified TWRP with backup of the modem partition support
here

[Zaknofein]

Fix recording to internal memory in Lollipop

ATterminalor inadbregister these commands:

Su
restorecon -v -R / data / media

or

su
restorecon -FR / data / media /

Post has been editedLes76 - 17.11.14, 13:30

Reason for editing: Edited and added to the header

[scorpio90]

[email protected], 23:26

...
similarly, colleague)))
I myself suffer.
Now I roll back to the stock and try again, so to speak from scratch.
it may be necessary to first install AN 3.1 ...

There was a problem on the stock 5.0 which is rutovy there somewhere in the depths of the topic there is how to fix 3 different xs codes through the terminal that helped but only after the reboot it worked

[0rgrimmar]

vitaliy5858 @ 11/15/2014, 00:54

memory problem has not changed

evgenius81 @ 11/15/2014, 01:26

I myself suffer.

What's the problem? Read-only access? If yes, then here is the solution.
In the console, write, if it did not work, then at the end after the media add / 0

su
restorecon -v -R / data / media