Assistant
We strongly recommend to familiarize withRules section "Android - devices"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Cube i6 - Discussion | Tablet, 9.7 '' |
Message#1 30.10.14, 13:38 | |
[offline] [offline] Group: Friendssavagemessiahzine.com Messages 4455 Check in: 02.08.06 Samsung Galaxy Note9 Exynos Reputation: 954 | DiscussionCube i6 Cube i6 Description | Purchase | Discussion �
ATTENTION! Everything you do with the device, you do at your own peril and risk! The authors of manuals and firmware are not responsible for the wrong actions of the owners! Specifications: Cube i6 on the Intel Z3735F BayTrail-CR 64 bit 1.8GHz platform, GPU: BayTrail-CR HD Graphics Gen7 Directx 11 646MHz RAM / ROM: 2 / 32Gb, wireless: Wi-Fi (802.11b / g / n) / BT 4.0 / 3G (WCDMA: 900 / 2100MHz). voice calls are possible. GPS Display: Air Retina IPS IGZO Screen 9.7 ", 2048x1536 pixel battery: 8000MAh Cameras: 2MP front and 5MP rear cameras, Slots: microUSB OTG port, microSD card slot OS: Android 4.4.2 dimensions: 237 * 170 * 7.5 (8.8?) mm Weight: 560g (480?) information fromvilidim: "There is no compass in i6. Not that it was very critical, but for me, for example, it turned out to be an unpleasant surprise." Tests, reviews Firmware
Install Windows 8.1 links to instructions and filesherethank youtamahos'a. So far all instructions are in Chinese and English, but there are a lot of screenshots. Instructions in Russian !! Thanks to the author. Archive of necessary files on the mirror Install Windows 10 Install Windows 10thank yourazorblade Alternative installation of Windows 10thank youSergejj28 Link to a Windows 10 imagethank yourazorblade Windows 10 Single languagewith integrated drivers, thank youNeoyurik Q2S under Windows 10thank youexs20 Useful, tips, instructions power button repair explanation of the work of WiFi and Bluetooth Integrating drivers into an image with Windows TWRP recovery for our device Android touch sensitivity settingandAdditional Information testing various chargers and cables Who has a problem with the power button Driver for WiFi on Windows Full backup tabletand additional informationhereandhere photo report after removing the film OTG and charging at the same time- works only onWindows; more perfectoption Card reader speed increase Change language in Windows Installing Xposed new instruction. increase space for Androidandexplanation Some useful tips that will help when working with the tablet Getting root rights Root is an easier way DualBoot on Cube i6 Windows 10 Technical Preview drivers Information about transferring the application cache to a micro sd cardandexplanation instructions for disassembling the tablet and removing the film The time difference between Win and Android Android virtual machine under Windows 8 Utility for removing old drivers Utility to extract the Windows key about the full discharge on the WiFi version of the device solving problems with GPSandstill BIOS default settings changes in the cap
For questions about filling the caps, contact the curator of the topic. Biohazard.rus Post has been editedBiohazard.rus - 18.02.19, 21:25 Reason for editing: Updated. |
Message#4222 04.02.19, 19:18 | |
Novice [offline] Group: Active users Messages 45 Check in: 12.11.14 Reputation: 0 | lonelyplayer623, https: //m.ru.aliexpres…4Mac3yBfw1549296930913From this tablet fits one to one. I put this on a tablet earlier to a friend. |
Message#4223 09.02.19, 17:36 | |
Visitor [offline] Group: Users Messages 10 Check in: 22.05.09 Reputation: 0 | |
Message#4224 09.02.19, 21:55 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 28.03.07 Xiaomi Mi 5 Reputation: 4 | [email protected], 17:36 Step by step instructions for the firmware. The firmware ended with a message (on the screen) and is not overloaded. This is normal. With firmware it happens. Do not overlook this message. It should load without any problems. Posted 02/09/2019 at 10:00 PM: Ported firmware with Teclast Taipower X98 Air 3G. The twin of our tablet. If someone needs I can lay out. There is no Chinese in the firmware. Added Chrome and Youtube, worth a native 264 dpi for our tablet. Only Android is left. |
Message#4225 10.02.19, 10:23 | |
Visitor [offline] Group: Users Messages 10 Check in: 22.05.09 Reputation: 0 | You are right, from the boot you have rebooted to android. Filled in dualbut windows. Ported firmware from Teclast Taipower X98 Air 3G Replace succeed without sacrificing duals? And in fact, as this tablet came to me ... There was a complaint that sometimes hangs and overloads, I will fix it, well, but not in the garbage. Of course, I threw it away. Does this happen to them or is it really sick? Post has been editedgrobagol - 10.02.19, 10:31 |
Message#4226 10.02.19, 15:54 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 160 Check in: 02.02.14 Samsung Galaxy J5 Reputation: 3 | There was a problem with browsers, chrome does not work, Mazil-writes an error application. The native browser works, made a complete reset, but the error remains :( What do you mean? :) |
Message#4227 11.02.19, 12:57 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 28.03.07 Xiaomi Mi 5 Reputation: 4 | grobagol If you replace the partition.tbl file from the native firmware with the firmware, then everything should work in the dual block. But not the fact that the Windows run. Most likely it will need to be rearranged. Post has been editedsnake20031 - 11.02.19, 13:04 |
Message#4228 11.02.19, 13:04 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 28.03.07 Xiaomi Mi 5 Reputation: 4 | |
Message#4229 11.02.19, 17:43 | |
a guest [offline] Group: Users Messages 9 Check in: 30.07.14 Reputation: 1 | inadeliriumwrote The power buttons and volume buttons punctured the central pads. The wire is soldered to them and brought out through the holes. The excess solder was removed with a scalpel, degreased and glued back the film with pressure membranes. Wires soldered to the corresponding conclusions of the plume of buttons. The wire used winding from the speaker of polyphony Nokia phone. If you do everything neatly, it looks nice and connects well to the connector on the motherboard. So the problems with the buttons I have once and for all ended ... If I open it, I will take a photo. I consider the defect of the buttons the failure of a contact directly on the most central contact area of ​​the button due to frequent pressing. |
Message#4230 17.02.19, 06:26 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 92 Check in: 29.06.11 Oneplus 5 6/64 Reputation: 1 | Ported firmware with Teclast Taipower X98 Air 3G. The twin of our tablet. If someone needs I can lay out. There is no Chinese in the firmware. Added Chrome and Youtube, worth a native 264 dpi for our tablet. Only Android is left. lay out. interesting to try and preferably instructions how to fill over native |
Message#4231 17.02.19, 22:55 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 28.03.07 Xiaomi Mi 5 Reputation: 4 | Ported firmware with Teclast Taipower X98 Air 3G. Android version 4.4.4 According to the test results, the following happened: 1) Dpi returned to 320, as some applications from Google do not support its native dpi (264). 2) Updated all the gaps that are possible. Took from the open gapps project. 3) Updated Nova launcher in the original firmware. 4) A little tweaked build.prop Nothing else tweaked. At the first start, remove the checkmark data and application recovery from Google. Yes, do not pull the old applications. Google services may not work properly. All set up as a new device. Due to the fact that I had to search for as many native Google applications as possible, I would reduce the likelihood of incorrect operation. When you first start, you can choose the default launcher. FIRMWARE CALCULATED FOR USE ONLY ANDROYDA You can try to replace the partition.tbl file from the native firmware, then you will be able to work in dual mode. But Windows will have to be rearranged most likely (but this is not accurate). It is stitched the same way as native firmware. Everything is sewn through Manufacturing Flash Tool. DATA WILL BE DELETED ���� �������� downloadPS: At the moment everything works without problems. All Google applications are updated and working. How long it will be long and stable I do not know. I collected the first time in my life firmware, so do not judge strictly. Everything is checked on your device, as I use this tablet myself. Post has been editedBiohazard.rus - 18.02.19, 21:19 Reason for editing: added Android version |
Message#4232 17.02.19, 23:02 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 28.03.07 Xiaomi Mi 5 Reputation: 4 | |
Message#4233 18.02.19, 02:07 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 92 Check in: 29.06.11 Oneplus 5 6/64 Reputation: 1 | |
Message#4234 24.02.19, 10:42 | |
a guest [offline] Group: Users Messages 6 Check in: 13.03.15 Alcatel POP C5 OT-5036D Reputation: 0 | Greetings to all! I have our tablet, dualboot, android 4.4.4, firmware I6_V1.1_20150116_171106, came with Win8 (which is updated to Win10), bios -InsydeH2O, B30_I6_203. And the question to know people is whether it is possible to pour Android 5 from Teclast onto it (preferably without rearranging Windows) The tablet was bought for a long time and completely suits me and pleases, a very successful model ... but I want to update the android .. |
Message#4235 03.03.19, 12:37 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 50 Check in: 28.03.07 Xiaomi Mi 5 Reputation: 4 | [email protected], 10:42 Greetings to all! I have our tablet, dualboot, android 4.4.4, firmware I6_V1.1_20150116_171106, came with Win8 (which is updated to Win10), bios -InsydeH2O, B30_I6_203. And the question to know people is whether it is possible to pour Android 5 from Teclast onto it (preferably without rearranging Windows) The tablet was bought for a long time and completely suits me and pleases, a very successful model ... but I want to update the android .. Not. Android 5 has a different system layout. Plus, how are you going to get the screen working correctly, a sim card? |
Message#4236 04.03.19, 10:58 | |
Visitor [offline] Group: Active users Messages 16 Check in: 13.04.09 Xiaomi Mi 5S 3/64 Reputation: 0 | Just like many, I caught a problem with browsers, tried different ones, while I stopped at Mint, like some kind of hack from Xiaomi. While working. |
Message#4237 13.03.19, 23:17 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 448 Check in: 12.08.09 HomTom HT50 Reputation: 84 | Can anyone remind me how to enter the recovery (to reset to the factory ones) in android mode? Something does not work, but I can not reset from the settings, because I caught a bootlap when updating superSu. -------------------- HOMTOM HT50 <= HOMTOM HT6<= THL 4400<= ZOPO ZP700<= ZOPO ZP100 CUBE i6 <= PIPO M6 pro<= CUBE U9GTV<= CUBE U9GT2 GitUp G3 90 ° <= GitUp2 170 ° |
mobile version | Now: 05/18/19, 21:19 |