[X]Assistant

[diksun]

Acer Liquid E700 - Firmware
Acer Liquid E700 Trio
Description | Discussion пїЅ | Firmware пїЅ

Important information!

Three sim cards are supported by official firmware only, in all unofficial firmware only 2 sim cards work.

Drivers and Utilities

SP_Flash_Tool - MTK-based flash driver for smartphones
MT65x3 USB VCOM drivers.7z(3.27 MB)

Engineering menu and butanimation

Firmware

Official firmware

Official update until 1.027.00
Official update to version 1.026.00.
Firmware 1.14 for flashtool
Firmware for CWM 0.14 - 1.27 - updated post
Firmware 1.24 for SP Flash Tool
Acer_AV0K0_E39_1.025.00_EMEA_GEN1 Firmware
Acer_AV0K0_E39_1.025.00_GEN1_Deodex under CWM / TWRP

Unofficial firmware

Resurrection Remix 5.7.4 r74
Android 6.0.1 CM13
Resurrection Remix Android 6.0.1
miui7 (Explay Tornado port)

Instructions

The problem with the recovery and firmware with custom recovery
Recover native IMEI without donor NVRAM
Device recovery after an unsuccessful update (or in other situations).
Proven way to flash 0.20
Rollback after unsuccessful update
Compilation of instructions with XDAfromMr.Boshi
Recovery after unsuccessful formatting with sp flash toot
CWM problems and solutions
USB Drive Mode
Installation instructions Resurrection Remix 5.7.4 r74

Root, kernel and recovery

• Kernel with init.d support
  
• Stock recovery from 1.025.00 and 1.026.00 firmware
  
• original recovery 1.27 firmware. inside and CWM recovery
  
• The way to get root, which does not conflict with official updates
  
• CWM recovery firmware (recovery) + root
  
• Carliv Touch Recovery V3.0 (CWM 6.0.5.1) / Installation Recovery and Backup NVRAM
  
• Installing recovery with Mobileuncle Tools
  
• TWRP Recovery 2.8.5.0
  
• TWRP + 2.8.7.0 ++ RUS
  TWRP 3.0.3
  
• root for 1.14
  
• root + custom recovery + stok recovery
  
• iRoot]
  
• Another way to get
  
• Getting Root
  
• Delete root through CWM / TWRP using ADB.
  

miscellanea

One way out of the bootlup
Backup imei
Modification of the appearance with the installation of SoftToch buttons on the screen
Entrance to the engineering menu
EngineerMode255
Service documentation from the manufacturer

There is no curator in the subject. For questions about filling caps, please contactmoderatorssection through the "Complaint" button under the messages to which you want to add links.

Post has been editedsnekt - 22.12.18, 17:53

Reason for editing: editing

[Tui LyakOv]

Trying to put CWMfrom here. For the time being to no avail, the Uncle Lyowsky hieroglyphic is still loaded. Maybe it's in the /system/recovery-from-boot.p file, but you need to root to remove it. Vicious circle.

[menx]

On the German forum, the root was received according toInstructions - Methode 1.
just in case, they write that methode 1.1 does not work. Only methode 1.

[Tui LyakOv]

[email protected], 00:30

On the German forum, the root was received according to the instructions - Methode 1.
just in case, they write that methode 1.1 does not work. Only methode 1.

But for this, again, backup should be done, but CWM has not yet been set up ...

[diksun]

Cwm needs to be set from a smart card with 4.4 and a percent of ours

Posted on 09/12/2014 07:29:

For example from hereExplay Fresh - Firmware (OS 4.2)

Posted on 09/12/2014 07:30:

Or from hereExplay Flame - Firmware (OS 4.2)
Then ask for a file of yanota, he promised us to file. Recovery

[Tui LyakOv]

Today it turned out to flash cwm, and immediately you need to install root to remove /system/recovery-from-boot.p, because it wipes the third-party recovery. In the evening I will try the full procedure.

[diksun]

Tui LyakOv,Then step by step instructions roll, add to the header

[Tui LyakOv]

Ended torment. : Rofl: It turns out that the recovery was a long time ago, just the entrance to it is power + volume DOWN, and not upward as I tried before.
CWM recovery firmware (recovery) + root:
1. Download drivers from the siteAcer
2. We turn on the debugging mode in the smartphone: settings - on the phone - quickly press several times on the build version, then debug in the menu for developers
3. DownloadSP_Flash_Tool_v5.1348.00.zip(28.96 MB)

4. DownloadCWM + Root-Liquid-E700.zip(7.36 MB)

5. Unpack
6. recovery.img and MT6582_Android_scatter.txt We throw in the folder with SP Flash Tool
7. Run flash_tool.exe

select the scatter file from the folder

and push the buttonDownload
8. Turn off the phone, connect the cable after vibration, run a strip at the bottom, then close the windows.
9. Copy UPDATE-SuperSU-v2.02.zip to the SD card
10. Boot into recovery: power + volume DOWN after the appearance of the inscription "Acer" power release, hold the volume, get into the menu, select recovery in it.
11. Install zip from SD-card
12. We have a smart root;)

root check

Takenfrom here

All operations you do at your own risk.
Firmware if there is anything on the siteAcer

Post has been editedTui LyakOv - 12.09.14, 18:12

[hiker]

If you need to install updates from the acer over the air, will it be installed, and will Ruth fly every time?

[Tui LyakOv]

[email protected], 07:17

If you need to install updates from the acer over the air, will it be installed, and will Ruth fly every time?

This can be learned only when a new update appears. Alternatively, roll back, flash recovery, then check.

[hiker]

Tui [email protected], 08:23

This can be learned only when a new update appears. Alternatively, roll back, flash recovery, then check.

Thank.

I will wait for someone to experiment, I do not have the skills to restore the factory firmware. Yes, and the root is not really needed yet, except for an antivirus (firewall), but for now I will wait.

[archer75]

[email protected], 09:19

archer75, check drovishki, Windows curves.

Firewood off site. Windows 7 * 64 Ultimate. I have already reinstalled this firewood 5 times with the removal of the device, and without ...

[nexus4ruslan]

I can't open access to it (

[Tui LyakOv]

[email protected], 09:43

I can't open access to it (

My instructions for getting working at 100в„…

[hiker]

Tell me, can I just put root, without recovery? Otherwise, I just want it for the firewall and for removing unnecessary garbage (applications), while I just stopped it, but I already had an effect on the RAM. I do not want to put rekoveri, because I am afraid of conflicts with the following updates.

P.S. I just need a phone with a minimum set of extra. Functions, and all these podluds are Aser's (well, not all, there are a couple of good ones) and Google’s only memory and traffic are eating.

[hiker]

The above question is no longer relevant, I hope that it will be possible later to return to the standard bootloader, suddenly you will need it.
In the instructions for the firmware recovery, a couple of points are not specified, but it was sewn the first time.

Post has been editedhiker - 16.09.14, 13:19

[zan30]

[email protected], 13:33

Otherwise, I just want it for the firewall and for removing excess garbage (applications)

That's just the extra garbage that you have removed and will not allow you to upgrade officially later.
Therefore, I do not advise you to delete anything. If you do not need something, it is better to freeze with Link2CD. Otherwise, you will not be able to update "by air" ...

[hiker]

[email protected], 14:50

That's just the extra garbage that you have removed and will not allow you to upgrade officially later.

And to return everything as it was then possible (before installing the recovery and root)?

[Tui LyakOv]

[email protected], 14:53

And to return everything as it was then possible (before installing the recovery and root)?

Official firmware Acer from the site restores everything as "out of the box"

[hiker]

Tui LyakOv,
A small instruction on the restoration to the factory state can be? So I did not ask more stupid questions. On my tablet, it was just that the root was out of the box, but I didn’t do any plush stuff, so I didn’t need to get there.

P.S. You can even add to the header, I downloaded the firmware file, but I don’t know how to fill it.

Posted on 09/16/2014, 14:35:

I do not see the firmware update in the recovery.

[Tui LyakOv]

So in the recovery item update and no. The firmware is poured using the sp flash tool by analogy with the cwm installation, just select the items to restore: "boot, recovery, system, etc.
Again: all the manipulations are at your own risk.

Post has been editedTui LyakOv - 16.09.14, 15:14