[X]Assistant

[vasiliy5617]

DiscussionAinol Numy AX9 3G
Ainol Numy AX9 3G
Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Specifications:

Brand Tablet PC: AINOL
Screen size: 9.7 inch
OS: Android 4.2
Shell Material: Metal
Screen Type: Capacitive, IPS
Screen resolution: 1024 x 768 (4: 3)
CPU Brand: MTK
CPU: MTK8382 Cortex-A7 Quad-core ARMv7 Processor
CPU frequency: 1.3GHz
GPU: Mali-400 MP2
RAM: 1GB
ROM: 8GB
Camera: 5 megapixel rear camera, 0.3 megapixel front camera
Battery: 6000mAh

Additional Information:

Functions: WiFi, Bluetooth 4.0, GPS, A-GPS, OTG, Miracast, FM Radio
WiFi: WiFi, Wi-Fi Hotspot
External 3G: WCDMA 2100MHz
2G network frequency: 850MHz, 900MHz, 1800MHz, 1900MHz
Camera features: Smiling Face Recognition, Sphere Panorama Shooting, Facial Beautification, Continuous Shooting, Autofocus, Face Recognition
Sensor: Gravity Sensor
Language: English, Russian, Spanish, French, Italian, Portuguese, Dutch, Indonesian, Ukrainian, German, Hindi, Persian, Arabic, Hebrew, Serbian, Bulgarian, Greek, Zulu, Turkish, Vietnamese, Suahili, Swedish, Finnish, Slovenian, Slovak, Romansh, Filipino, Romanian, Norwegian, Polish, Dutch, Malay, Hungarian, Lithuanian, Latvian, Croatian, Danish, Czech, Catalan, Amharic, Thai, Korean, Japanese, Chinese, Khmer
Audio Format: MP3, WAV, WMA, AMR, MID, OGG, FLAC, AAC
Image Format: JPG, BMP, GIF, PNG
Video Format: MPG, RMVB, FLV, MP4, 3GP, AVI, MKV, MOV, DAT
Formats of electronic books: TXT, CHM, UMD, PDF, etc.
Expansion Port: TF Card Slot, SIM Card Slot, Micro USB Port, 3.5 mm Earphone Port
Color: Silver
Net weight: 609 g / 21.48 oz
Size: 240 x 172 x 9 mm / 9.45 x 6.77 x 0.35 inch

Instructions

CWM Recovery Installation Instructions
Instructions on firmware

Driver

USB_Drivers

ROOT

Get root using framaroot

Firmware

Backup is clean, version 4.1 android, for tablet Numy 3G P97
Ainol P97_2G firmware without Chinese software, spontaneous software installation and 2 GB for software installation
BB-mobile Techno 9.7 3G TM056U firmware

Useful

Stock SystemUI.apk from Ainol P97_2GB firmware

The topic is closed. If necessary, you can open a topic. For all questions regarding the topic contact the moderator subsection

Post has been editedSergey_Ace - 13.10.16, 23:24

Reason for editing: Stock SystemUI.apk from Ainol P97_2GB firmware

[SneakyAsian]

Earned after disassembly. It turned out that the cable of the microUSB card was inserted not exactly. Disconnected-connected and earned. All the firewood was established by yourself. OTG also works now.

[nicke 74]

As for the tacha, it’s good that on the guarantee, the problem with the tachim-carried it to the seller, said you need to change, will order and everything will be done ...

[adamoff]

SneakyAsian @ 12/10/2014, 04:29

Cube U51GT

Who else plows CWM? I swear at "" PMT changed for the ROM, it must be downloaded "when trying to sew SP_Flash_Toll
I read in the internet that PMT is a disk partitioning and there were cases of dead devices with a forced firmware with such an error ...
Any ideas ?

Post has been editedadamoff - 12.12.14, 23:03

[SneakyAsian]

adamoff
Everything was done for me and works without problems. No errors popped up. I can post photos or videos tomorrow with the same recovery worker.
Do you do everything according to the instructions?
Need to flash modeDownload OnlyIf not sewing, then Firmware Upgrade.

Post has been editedSneakyAsian - 13.12.14, 02:16

[kostea69]

Who knows, are ipad air cases suitable for this tablet? It seems the dimensions are similar. If not, what covers do you use?

[timoncrew]

[email protected], 22:49

Who knows, are ipad air cases suitable for this tablet? It seems the dimensions are similar. If not, what covers do you use?

I ordered it on AlisuchIn a couple of days I will get it.

[SneakyAsian]

For him fit case from ONDA V919 \ V975S. There is exactly the same tablet. The same touchscreen, the same back cover, only cutouts for the speaker in different places. At Onda, they are on the end, near the microusb, and on the AX9 at the back, but it will not be difficult to drill holes with a drill or a self-tapping screw.
Here he is. I ordered one, will come soon, then I will unsubscribe and photograph.

[havoctomsk]

About the case, you can see here:Comcenter.ru- 260 rubles. In stock shows that there are "Golden", in fact, only black. Also there is a protective film.

The tablet itself costs 6300 rubles. (attention! Included in addition to the box and warranty: there is only a tablet and a cable, the charger adapter is purchased separately).

I'm testing the week: I did not find any problems. Only my name is not AX9, but Ainol Numy 3G P97 (AX9), I don’t know what the difference is. According to the seller, out of 20 sold returned 1 (problem with food).

One of these days I want to upgrade 3g and Sim card.

Regarding the duration of the work: tested several models (Vegas (Ax2), P97 (AX9), Novo 8 Advanced Mini) - In the video viewing mode, it turned out to be the most resistant -5.5 hours at maximum volume and backlight.

[nikita_ab]

I do not have most of the applications in the Play Market?
Writes: Not enough space ... (although there is space)

Googled, it seems like this may be due to the fact that the device is not supported by the Play Market (and here it is just Chinese)

[vasiliy5617]

[email protected], 14:34

I do not have most of the applications in the Play Market?
Writes: Not enough space ... (although there is space)

Googled, it seems like this may be due to the fact that the device is not supported by the Play Market (and here it is just Chinese)

If at least one application is installed from the Play Market, then it is supported. It can really not be enough space, applications are installed in the internal memory of the device, and its only 1 GB, the installed applications can be transferred to the USB drive of the device.

[nikita_ab]

vasiliy5617,
I have 300 megabytes free ...
Well, if others did not have such a problem, then the matter is not in the device ... I think the root and the firmware will help. Or hardress.

Post has been editednikita_ab - 17.01.15, 06:42

[zery]

I do not have most of the applications in the Play Market?
Writes: Not enough space ... (although there is space)

Googled, it seems like this may be due to the fact that the device is not supported by the Play Market (and here it is just Chinese)

I have the same problem (-Xiaomi Redmi Note

Post has been editedzery - 20.01.15, 11:05

[SneakyAsian]

I have already learned from personal experience how to resurrect a tablet with unsuccessful firmware. It turns out that the Chinese on their website on the link on another page posted the latest firmware with the wrongpreloader.

After the firmware, the tablet does not charge, does not turn on, is not detected by the computer. The solution for this brick is as follows:
1. Remove the back cover of the tablet.

Remove the back cap for the SIM card and flash drive, unscrew 4 screws and push the SIM card between the screen frame and the aluminum panel, draw the SIM card around the entire circumference until all the latches are released and remove the back panel.

2. Disconnect the power connector.
3. Unpack the firmware somewhere on the computer.
4. Turn onSP Flash Tool 5.14and specify the path to the fileMT6582_Android_scatterfrom the folder with unpacked firmware (see point 3)
5. Set the settingFormat All + Downloadand clickDownload.
6. Holdinga buttonVolume +In the pressed state, we connect the USB and wait until the firmware process starts. (BUTTON DO NOT RELEASE!)
7. As soon as you see interest on the yellow firmware download bar, you can release the Volume + button and wait for the process to finish.
8. After the end of the firmware, turn off the USB, connect the battery power connector and turn on our device for testing.
9. Put back cover.

As I said, the firmware from the Ainol website is not working and leads toBRICK(3 times sewed, 3 times ripped). I solved this problem by replacingpreloader.binfrom the new version on preloader.bin from the previous version, which is flashed without problems, and then packed the WORKING latest version of the firmware for our tablet + did a remapping of the memory on2 GB USRDATA(instead of 1 GB, 2 GB will be allocated for applications and there will be no error with a lack of space). I post the firmware for the members of the forum.

Stitch modeFirmware upradevia SP Flash Tool (for those who have wired: see instructions above)
Do not forget to dobackup NVRAM!
Ainol_AX9_2014.09.05_2GB
SP_Flash_Tool_v5.1452.00.000.rar(24.67 MB)


Here isCWM recoveryfor our little animal. Install via Mtk Droid Tools.

1. Enable USB debugging in the tablet. (Developer Settings)
2. Install Root Rights (Framaroot application to help)
3. Launch MTK Droid Tools, connect the USB cable to the tablet.
4. Wait for the connection (the green square should be lit in the corner), and your device should be recognized.
5. Go to the root, backup, recovery tab.
6. Click on the Recovery and Boot button.
First, it will offer to specify the path to boot.img, but we click cancel, then it asks to specify the path to recovery.img and we specify the path to my file.
7. Turn off the tablet and go into the recovery through the combination On. and volume +

Download CWM recovery
MtkDroidTools.rar(9.97 MB)


Please add information to the header.

Post has been editedSneakyAsian - 02.02.15, 01:21

[kostea69]

[email protected], 02:54

Firmware in Firmware Uprade mode via SP Flash Tool

Can be more?
In what mode should the tablet be at this moment?
Should any drivers be installed?

[SneakyAsian]

kostea69The tablet must be turned on.
1. Enable tablet modeUSB debugging. (Developer settings)
2. Set root rights (AppendixFramarootto help)
3. RunMTK Droid Tools, connect the USB wire to the tablet.
4. Wait for the connection (in the corner of the program the green square should be lit), and your device should be recognized.
5. Go to the tabroot, backup, recovery.
6. Click the buttonRecovery and Boot.
First, it will offer to specify the path toboot.img, but we click cancel, then it asks for a path torecovery.imgand we specify the path to my file and click ok.
7. Turn off the tablet and go into the recovery through the combinationOn and volume +
recovery.img(5.33 MB)


Post has been editedEnlightened grandfather - 02.02.15, 01:28

Reason for editing: In the header

[nicke 74]

Tell me, can I put a recovery through my uncle and then your firmware already through the recovery?

[SneakyAsian]

nicke 74
My firmware is sewed through the SP Flash Tool, through the recovery it can not be installed.

I ask the moderator to fix the cap.
Instructions on firmware with the manual for the resurrection of brickshere.
And what was indicated in the header is the instructions for installing the recovery.

Post has been editedSneakyAsian - 03.02.15, 00:11

[nicke 74]

Thanks, another question to flash with the disconnected connector as it is written, is the device not a brick, or on the buttons flash?

Post has been editednicke 74 - 03.02.15, 00:11

[nicke 74]

Help! flashed firmware u. SneakyAsian. was not a brick. after the firmware hangs on the starry sky-off, and again to the starry sky. so ad infinitum. After that, I bore the instructions for "rebuilding a brick" - all the same ... what to do and how to deal with it?

Post has been editedEnlightened grandfather - 03.02.15, 13:26

Reason for editing: Pictures under spoiler

[SneakyAsian]

Calm MTC devices can not be turned around, so panic to the side. Everything will work.
Now let's do this in order:

1) The first time you were stitching in Firmware Upgrade mode? And after that you have an endless cycle of reboots?

2) If you turn it on, but it does not reach further than the boot animation, then this is not a brick. A brick is when it does not react to anything at all, does not charge and does not connect to a PC. Disassemble, in your case, it was not necessary.

3) I was flashing myself in the Firmware Upgrade mode withworkingtablet, and in Format All + Download mode afterscaling. Both times it was done without problems and the tablet started. It is strange that you do not want.

Here you have 2 stock firmware from the office. site. Try first Firmware_1 (older), and if it does not help, then Firmware_2 (newer).
Flash modeFirmware upgrade.
Firmware_1
Firmware_2
Turn off the tablet, turn on the SP Flash Tool, specify the scatter, setFirmware upgrade, we pressDownloadand insert the USB into the off tablet.

PS: Alternatively, you can specify in the SP Flash Toolscatter, go to the tabFormatto exposeAuto flash formatandFormat whole flash except bootloaderrunStart, connect the off tablet, and then turn off the tablet and try to flash the instructions withFormat All + Download.

Post has been editedSneakyAsian - 03.02.15, 20:06