Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Lenovo A536 - Firmware |
Message#1 01.12.18, 11:15 | |
Xiaomist / Guru / Google Camera [offline] Group: Friendssavagemessiahzine.com Messages 1148 Check in: 24.09.18 Redmi Note 7 3/32 Reputation: 462 | Lenovo A536 - Firmware Lenovo A536, LA536, A536, alps Description | Discussion � | Purchase � | MIUI firmware � | Firmware � Important information! Recommendations for the design of messages about firmware and updates FAQ about firmware versions. How to choose custom firmware, and which one is better? In order to enter the engineering menu, you need to enter in the application "Phone" number * # * # 3646633 # * # * Drivers and Utilities Drivers For the firmware mode, you need your own driver. Installing the driver for the smartphone in the normal mode does not replace the installation of the driver firmware mode! Drivers are identical with many smartphones. If a Lenovo smartphone driver is installed, there is no need to repeat this procedure for this type of driver! Advanced smartphone driver from PC (modem mode, debug mode via USB, etc.) Download:LenovoUsbDriver_autorun_1.0.12.rar(9.28 MB) Special mode driver - driver firmware mode for a smartphone from a PC (auto-installer) Download:Driver_Auto_Installer_v1.1236.00.zip(9.57 MB) Utilities Firmware Official firmware Firmware A536_S188- for TWRP Firmware A536_S188_160201- for FlashTool A536_S186_150813_ROW for FlashTool Firmware A536_S186- for TWRP Firmware A536 S162_141121- for TWRP Firmware A536 S161_141115- for FlashTool Firmware A536_S148_150423- for FlashTool Firmware A536 S147_140910- for FlashTool Custom firmware Kernel 3.4.67- put on top of any firmware Android 4.4x Android 5.x.x Android 6.x.x Kernel 3.10.x- set strictly according to the instructions below Android 5.x.x
Lollipop 5.0 NovaUI
Resurrection remix 5.5.9 CyanogenMod12.1 / Fix fix bug with offline charging Android 6.x.x Android 7.x.x TWRP recommended at least 3.2.3-1
AospExtended 4.6
Aokp ResurrectionRemix 5.8.8 crDroid 3.8.9 Coltos AICP | Android Ice Cold Project 12.1 LegendRom 19 ViperOS Extended 3.1.1 Android 8.x.x The recommended TWRP is not lower than 3.2.3-1. Firmware for this version of Android is downloaded for review, because it is not very stable.
Instructions Instructions and everything related to the kernel 3.10.x Getting Root Installing Advanced Recovery Installing unofficial firmware Repair IMEI Repair IMEI (without flash driver, root and recovery) Recovery nwram and imei via recovery Repair IMEI using SP Flash Tool IMEI repair and NVRAM WARNING error resolution through custom recovery Imei repair instructions Instructions for restoring imei, nvram via TWRP 3.0 Instructions for restoring imei from PC (Maui Meta 3G) Backup nvram Installing firmware from PC What is needed: Smartphone (chargingnot less than 30% -for safety, since the first launch eats up a lot of energy) PC running Windows XP / 7/8/10 x64 or x86 Lace to connect with a PC Light head and firm hands of the user Instruction: [1] Download and install on computerUSB Drivers.In principle, for the entire line of Lenovo smartphones, with rare exceptions, the drivers are identical. This refers to the driver package for the firmware of the smartphone (special modes) / Installing the driver does not cancel the need to install the driver for the firmware mode. [2] Download firmware [b] (officialorcustomFOR PC!) And unzip the archive to the root of the PC disk (any) in a folder with a Latin name. Folder name must NOT contain Russian letters or characters . Everything you need, including the firmware utility in the archive with the firmware, is initially present (meaning OFFICIAL firmware). In the case of custom, you have to download separately SP_Flash_TOOLS [3] Disconnect the device from the USB of the computer. Turn off the smartphone and pull out the battery. [4] Install the driver firmware mode - those who have installed, skip. on a PC (example for Windows 7) open the device manager. To do this, right-click to click on my computer on the desktop-properties-device manager [5] [attachment = "5173676: 1.png"] [6] [attachment = "5173678: 2.png"] [7] Unzip the driver special modes in any convenient place. [8] We connect the switched off smartphone to the PC. For 2 seconds, an unidentified device appears in the manager ... Quickly, until it disappears, tap on it - in the appeared window, clickUPDATE DRIVERand specify the path where we unpacked the driver. if you did everything correctly, then when you connect a switched off smartphone, the following device will appear for 2 seconds: [9] [attachment = "5173688: 9.png"] [10] Now you can install the firmware.Disconnectsmartphone from pc [11] Run the programFlash_tool.exe- it lies with the firmware folder in a subfolderUpgradetool [12] [attachment = "5173690: 12.jpg"] [13] Press the Scatter-Loading button, go to the folder with the firmware in the subfoldertarget_bin and select the file MT6582_Android_scatter_emmc.txt. In the case of a message Icorrect scatter File format - check the name of the packer of the flasher (as short as possible with Latin letters and / or change the version of the flasher itself.) [14] Tick-DA DL ALL WITH Cheksum(If the firmware is carried out without this checkbox, the device does not start! This is not fatal, but you will have to flash it again) [15] [attachment = "5173691: 15.jpg"] [16] Push button Firmware upgrade [17] [attachment = "5173692: 17.jpg"] [18] Now everything depends on the firmware and the device. If there is a Checksum.ini file in the firmware folder, then the status lines will run; this is a check of the integrity of the images. If there is no file, they will not run. If the check is started, you need to wait until it is over and the utility does not go into standby mode. If there is no check, you can safely connect the switched off device. Sew better with [19] For some new devicesA-series- flashing does not start from the first connection. Make sure that the firmware has not started, the charging process is displayed on the screen and remove the cable from the phone. wait half a minute and re-insert the cable.Nothing to do on the PC. [20] Another detail is that sometimes Checksum.ini contains incorrect information about the volume of images. In this case, after running the check, the error window will appear (we have not yet flashed the device and didn’t connect it, right?) In this case, if you are sure that you downloaded everything correctly and the archive unpacking by the archiver was completed without errors, close the flasher. On the PC file manager, go to the folder with the firmware, delete the file Checksum.ini and repeat the steps starting from the 11th. If everything is okay - skip this item. [21] Another mistake that occurs very often. [22] [attachment = "5173694: 22.png"] If everything is okay - skip this item. . Attention to the screen - the scatter is selected and the key is pressedFirmware upgrade- everything seems to be correct. but the error has taken off. And it flew because the flash driver for some reason could not CAM automatically load the FAC section - there is no check mark and no path to the image. Not scary, click OK in the message. Next, look at the screen: Make two clicks of the mouse on the selected image (the one without a tick) [attachment = "5173697: 221.png"] The explorer will open (your folder with the firmware image will openTarget_bin: [attachment = "5173700: 222.png"] Make two clicks on the missing image. It is with that name, remember the list, which was not ticked. I draw your attention, just choose the same name. If there is an error, there will be a brick. now everything is done correctly - look at the screen - all the checkboxes are in their places: [attachment = "5173701: 223.png"] You can click Firmware Upgrage and flash the device 23. OFFSmartphone connect the device to your computer via USB. The firmware will start automatically. 24. Wait until the end of the firmware (may take considerable time) At the end of the firmware, you will see the following window. 25. [attachment = "5173702: 25.jpg"] 26. Disconnect the device from the USB of the computer. 27. Turn on the machine. Link to the original instructions How to get to Recovery [1] Turn off the phone [2] Press the volume buttons+ and - [3] Holding the volume buttons, press the power button and wait until the Lenovo logo appears. After the label appears, you can release the on button. [4] When the Recovery screen saver appears, you can release the volume buttons. Video instructions Instructions on firmware Installing official OTA updates (s147,150,161) GPS MTK setup for receiving a signal in Ukraine. (ROOT) Preloader recovery Recovery / Root / Custom Kernels / Sources Recovery TWRP recovery FAQ TWRP 3.2.3-1 TWRP 3.2.3-0 TWRP 3.2.1-0 Theme PitchBlack v2.5 TWRP 3.1.1 TWRP 3.1.0 TWRP 3.0.3 TWRP 3.0.2 TWRP 3.0 TWRP 2.8.7.0 TWRP 2.8.6.0 TWRP 2.7.7.10 Stock Recovery from S161 firmware Chinese recovery Root Magisk for Android 7.1.2Updateable post SuperSU Custom kernels Kernel for 8.1.0 and 9 Android Kernel for 8.1.0 Android sources Sources for Android 7.1.2 Modems Communication module 2018 P3 Communication module 2014/2015/2016/2018 Communication modules Communication module from ALPS_L1 Communication module assembly Phantom Communications Module OptiStock communication module Communication module from Lenovo S850 Communication module from UMI X2 PRO Fly Communication Module Patches / Add-ons Patch for memory substitution for ViperOS (7.1.2) (root) Patch for correct memory display in Explorer for CyanogenMod 13 The patch fixes CM11, 12.1, 13 bootloops when updating new versions of VKontakte, Twitter, MT Manager, Telegram, etc. applications. Patch to improve the photo and sound when recording video, fixes and other present shades of your camera Universal patch of vibration buttons for all CyanogenMod 12.1 Graphic patch for 6.1.21 and 6.1.26 miscellanea Solving the problem with internal memory on ALPS (L1) firmware (Android 5.1) Installing Magisk to Magisk 16.0 Patch - port for Lenovo A536 Android screen loading logo in 6.0 style Troubleshooting gps Permission to read and write to the memory card / Ready method Errors in the Flash Tool and solutions AM3D ZERENE Audio Fx Equalizer Dolby ATMOS surround sound technology The patch corrects the charging curve animation when the phone is turned off on any custom firmware List of active users of the topic. Post has been editeddestroyer71 - 16.05.19, 11:07 Reason for editing: editing |
Message#32942 09.03.19, 16:59 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 86 Check in: 02.01.19 Reputation: 0 | • Emelyanov •, what are you still great. Then another question: when I call, if not I drop the subscriber and he hangs my body. The screen turns on after putting it on the table, that is, horizontally. Starts responding after button off Post has been editedvirusorasprost - 09.03.19, 17:02 Reason for editing: Added |
Message#32943 10.03.19, 10:28 | |
Experienced [online] Group: Friendssavagemessiahzine.com Messages 554 Check in: 05.07.16 Reputation: 16 | |
Message#32944 10.03.19, 12:10 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 86 Check in: 02.01.19 Reputation: 0 | |
Message#32945 11.03.19, 15:36 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | |
Message#32946 11.03.19, 17:07 | |
Graphic Designer [offline] Group: Friendssavagemessiahzine.com Messages 828 Check in: 28.05.14 Xiaomi Redmi 4X 3/32 Reputation: 70 | Albertdan, this can not be so that the problem does not disappear. On s188, the new display driver on s162 is old, on one of them everything should work without any complaints. -------------------- Lenovo A536 (5 years) - Dead Xiaomi Redmi 4X - Pixel Experience (Treble) Graduate School of Curators 4 |
Message#32947 11.03.19, 17:09 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | |
Message#32948 11.03.19, 18:15 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | Someone can give the firmware for the flashlight with revision s162, I will be grateful?! -------------------- It is not interesting to live without risk |
Message#32949 12.03.19, 15:39 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | The problem remains With firmware up to s160, the phone does not turn on with firmware on s188 on the strip screen with firmware on s186 it comes to the logo and reboots -------------------- It is not interesting to live without risk |
Message#32950 12.03.19, 16:30 | |
Graphic Designer [offline] Group: Friendssavagemessiahzine.com Messages 828 Check in: 28.05.14 Xiaomi Redmi 4X 3/32 Reputation: 70 | Albert danwhat are you sewing through? upd: Try to change the battery upd2: Format all emmc memory and fill the full image through the USB flash drive, but it's not clear what and why you have such conflicts Post has been editedExdev - 12.03.19, 16:31 Reason for editing: Edited -------------------- Lenovo A536 (5 years) - Dead Xiaomi Redmi 4X - Pixel Experience (Treble) Graduate School of Curators 4 |
Message#32951 12.03.19, 16:39 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 612 Check in: 09.09.16 Lenovo A536 Reputation: 45 | |
Message#32952 12.03.19, 16:42 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | |
Message#32953 12.03.19, 16:44 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 612 Check in: 09.09.16 Lenovo A536 Reputation: 45 | |
Message#32954 12.03.19, 16:44 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | |
Message#32955 12.03.19, 16:45 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | |
Message#32956 12.03.19, 16:47 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 612 Check in: 09.09.16 Lenovo A536 Reputation: 45 | |
Message#32957 12.03.19, 16:49 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | |
Message#32958 12.03.19, 16:52 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 612 Check in: 09.09.16 Lenovo A536 Reputation: 45 | Albertdan, will not help. In general, it makes no sense to sew all the official firmware, because they differ only in the versions of the applications, well, maybe somewhere there are more of these applications. And the S188 is different display driver. Try all the same Lollipop. S185 does not help you. -------------------- There is no policy, there is only a forum. |
Message#32959 13.03.19, 07:17 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 105 Check in: 03.04.18 LG Spirit Reputation: 1 | |
Message#32960 14.03.19, 07:02 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 86 Check in: 02.01.19 Reputation: 0 | Guys question: custom firmware lilipop 5.0.2 I turn on the bodies for charging the red indicator as expected, but after 80% of the charge it lights up green, is this normal or is it fixed? Thanks in advance. : ok: |
Message#32961 14.03.19, 07:21 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 612 Check in: 09.09.16 Lenovo A536 Reputation: 45 | |
mobile version | Now: 05/19/19, 23:29 |