> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


1668 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Lenovo A536 - Firmware
Kernels for this smartphone
What do you think is the best core?
DEATH! 666 for Android 7.x.x [ 34 ] ** [18,18%]
DEATH! 666 for Android 6.x.x [ 11 ] ** [5,88%]
VoltageDropped Kernel for Android 6.x.x [ 2 ] ** [1,07%]
VoltageDropped Kernel for Android 5.x.x [ 10 ] ** [5,35%]
VoltageDropped Kernel for Android 7.x.x [ 20 ] ** [10,7%]
Pure core for Nougat [ 20 ] ** [10,7%]
Pure Core for Marchellow [ 8 ] ** [4,28%]
Pure core for Lollipop [ 19 ] ** [10,16%]
Stock 3.4.67 core [ 63 ] ** [33,69%]
Total votes: 187
 
bulkin043
Message#1
01.12.18, 11:15
Xiaomist / Guru / Google Camera
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1148
Check in: 24.09.18
Redmi Note 7 3/32

Reputation:-  462  +

Lenovo A536 - Firmware
PictureLenovo A536, LA536, A536, alps

Description | Discussion � | Purchase � | MIUI firmware � | Firmware �

Important information!
Recommendations for the design of messages about firmware and updates
FAQ about firmware versions.
How to choose custom firmware, and which one is better?
In order to enter the engineering menu, you need to enter in the application "Phone" number * # * # 3646633 # * # *
Drivers and Utilities
Drivers
For the firmware mode, you need your own driver.
Installing the driver for the smartphone in the normal mode does not replace the installation of the driver firmware mode!
Drivers are identical with many smartphones. If a Lenovo smartphone driver is installed, there is no need to repeat this procedure for this type of driver!

Advanced smartphone driver from PC (modem mode, debug mode via USB, etc.)
Download:Attached fileLenovoUsbDriver_autorun_1.0.12.rar(9.28 MB)


Special mode driver - driver firmware mode for a smartphone from a PC (auto-installer)
Download:Attached fileDriver_Auto_Installer_v1.1236.00.zip(9.57 MB)

Utilities

Firmware
Official firmware
Custom firmware
Instructions
Instructions and everything related to the kernel 3.10.x
Getting Root
Installing Advanced Recovery
Installing unofficial firmware
Repair IMEI
Backup nvram
Installing firmware from PC

What is needed:
Smartphone (chargingnot less than 30% -for safety, since the first launch eats up a lot of energy)
PC running Windows XP / 7/8/10 x64 or x86
Lace to connect with a PC
Light head and firm hands of the user
Instruction:
[1] Download and install on computerUSB Drivers.In principle, for the entire line of Lenovo smartphones, with rare exceptions, the drivers are identical. This refers to the driver package for the firmware of the smartphone (special modes) / Installing the driver does not cancel the need to install the driver for the firmware mode.
[2] Download firmware [b] (officialorcustomFOR PC!) And unzip the archive to the root of the PC disk (any) in a folder with a Latin name. Folder name must NOT contain Russian letters or characters . Everything you need, including the firmware utility in the archive with the firmware, is initially present (meaning OFFICIAL firmware). In the case of custom, you have to download separately
SP_Flash_TOOLS
[3] Disconnect the device from the USB of the computer. Turn off the smartphone and pull out the battery.
[4] Install the driver firmware mode - those who have installed, skip. on a PC (example for Windows 7) open the device manager. To do this, right-click to click on my computer on the desktop-properties-device manager
[5] [attachment = "5173676: 1.png"]
[6] [attachment = "5173678: 2.png"]
[7] Unzip the driver special modes in any convenient place.
[8] We connect the switched off smartphone to the PC. For 2 seconds, an unidentified device appears in the manager ... Quickly, until it disappears, tap on it - in the appeared window, clickUPDATE DRIVERand specify the path where we unpacked the driver. if you did everything correctly, then when you connect a switched off smartphone, the following device will appear for 2 seconds:
[9] [attachment = "5173688: 9.png"]
[10] Now you can install the firmware.Disconnectsmartphone from pc

[11] Run the programFlash_tool.exe- it lies with the firmware folder in a subfolderUpgradetool
[12] [attachment = "5173690: 12.jpg"]
[13] Press the Scatter-Loading button, go to the folder with the firmware in the subfoldertarget_bin and select the file MT6582_Android_scatter_emmc.txt. In the case of a message Icorrect scatter File format - check the name of the packer of the flasher (as short as possible with Latin letters and / or change the version of the flasher itself.)
[14] Tick-DA DL ALL WITH Cheksum(If the firmware is carried out without this checkbox, the device does not start! This is not fatal, but you will have to flash it again)
[15] [attachment = "5173691: 15.jpg"]
[16] Push button Firmware upgrade
[17] [attachment = "5173692: 17.jpg"]
[18] Now everything depends on the firmware and the device. If there is a Checksum.ini file in the firmware folder, then the status lines will run; this is a check of the integrity of the images. If there is no file, they will not run. If the check is started, you need to wait until it is over and the utility does not go into standby mode. If there is no check, you can safely connect the switched off device. Sew better withINSERTEDbattery.
[19] For some new devicesA-series- flashing does not start from the first connection. Make sure that the firmware has not started, the charging process is displayed on the screen and remove the cable from the phone. wait half a minute and re-insert the cable.Nothing to do on the PC.
[20] Another detail is that sometimes Checksum.ini contains incorrect information about the volume of images. In this case, after running the check, the error window will appear (we have not yet flashed the device and didn’t connect it, right?) In this case, if you are sure that you downloaded everything correctly and the archive unpacking by the archiver was completed without errors, close the flasher. On the PC file manager, go to the folder with the firmware, delete the file Checksum.ini and repeat the steps starting from the 11th. If everything is okay - skip this item.
[21] Another mistake that occurs very often.
[22] [attachment = "5173694: 22.png"]
If everything is okay - skip this item. .
Attention to the screen - the scatter is selected and the key is pressedFirmware upgrade- everything seems to be correct. but the error has taken off. And it flew because the flash driver for some reason could not CAM automatically load the FAC section - there is no check mark and no path to the image. Not scary, click OK in the message. Next, look at the screen: Make two clicks of the mouse on the selected image (the one without a tick)
[attachment = "5173697: 221.png"]
The explorer will open (your folder with the firmware image will openTarget_bin:
[attachment = "5173700: 222.png"]
Make two clicks on the missing image. It is with that name, remember the list, which was not ticked. I draw your attention, just choose the same name. If there is an error, there will be a brick. now everything is done correctly - look at the screen - all the checkboxes are in their places:
[attachment = "5173701: 223.png"]
You can click Firmware Upgrage and flash the device
23. OFFSmartphone connect the device to your computer via USB. The firmware will start automatically.
24. Wait until the end of the firmware (may take considerable time) At the end of the firmware, you will see the following window.
25. [attachment = "5173702: 25.jpg"]
26. Disconnect the device from the USB of the computer.
27. Turn on the machine.
Link to the original instructions
How to get to Recovery
[1] Turn off the phone
[2] Press the volume buttons+ and -
[3] Holding the volume buttons, press the power button and wait until the Lenovo logo appears. After the label appears, you can release the on button.
[4] When the Recovery screen saver appears, you can release the volume buttons.
Video instructions


Instructions on firmware

Installing official OTA updates (s147,150,161)
GPS MTK setup for receiving a signal in Ukraine. (ROOT)
Preloader recovery
Recovery / Root / Custom Kernels / Sources
Modems
Patches / Add-ons
miscellanea
Poll results
The best firmware 08/12/2018
Attached Image

List of active users of the topic.


Post has been editeddestroyer71 - 16.05.19, 11:07
Reason for editing: editing
avtorik
Message#2
02.10.14, 08:00
I try to be good
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1180
Check in: 21.04.10
Xiaomi Redmi Note 4 4/64

Reputation:-  73  +

Lenovo A536 - Firmware
PictureLenovo A536 - alps
Description | Discussion � | Purchase � | MIUI firmware � | Firmware �
Important information!

If the device got into your hands the first thing you have to do isIMEI backup!

Drivers and Utilities
Drivers
For the firmware mode, you need your own driver.
Installing the driver for the smartphone in the normal mode does not replace the installation of the driver firmware mode!
Drivers are identical with many smartphones. If a Lenovo smartphone driver is installed, there is no need to repeat this procedure for this type of driver!

Advanced smartphone driver from PC (modem mode, debug mode via USB, etc.)
Download:Attached fileLenovoUsbDriver_autorun_1.0.12.rar(9.28 MB)


Special mode driver - driver firmware mode for a smartphone from a PC (auto-installer)
Download:Attached fileDriver_Auto_Installer_v1.1236.00.zip(9.57 MB)


Utilities

Firmware
FlymeOS 6.x / AOSP 6.0.1
Kernel 3.4.67
Android 4.4x KitKat
Official firmware
Unofficial firmware
Android 5xx Lollipop
Android 6xx Marshmallow

Vault with firmware
Alternate storage with firmware

Kernel 3.10+

Instructions
Smartphone firmware manual
Instructions for switching to the kernel from the drain and entering the recovery
How to flash firmware on 3.10+ core!
Getting Root

Installing Advanced Recovery

Installing unofficial firmware

Repair IMEI

Backup nvram

Installing firmware from PC

What is needed:
Smartphone (chargingnot less than 30% -for safety, since the first launch eats up a lot of energy)
PC running Windows XP / 7/8/10 x64 or x86
Lace to connect with a PC
Light head and firm hands of the user
Instruction:
[1] Download and install on computerUSB Drivers.In principle, for the entire line of Lenovo smartphones, with rare exceptions, the drivers are identical. This refers to the driver package for the firmware of the smartphone (special modes) / Installing the driver does not cancel the need to install the driver for the firmware mode.
[2] Download firmware [b] (officialorcustomFOR PC!) And unzip the archive to the root of the PC disk (any) in a folder with a Latin name. Folder name must NOT contain Russian letters or characters . Everything you need, including the firmware utility in the archive with the firmware, is initially present (meaning OFFICIAL firmware). In the case of custom, you have to download separately
SP_Flash_TOOLS
[3] Disconnect the device from the USB of the computer. Turn off the smartphone and pull out the battery.
[4] Install the driver firmware mode - those who have installed, skip. on a PC (example for Windows 7) open the device manager. To do this, right-click to click on my computer on the desktop-properties-device manager
[5] Attached Image
[6]
Attached Image

[7] Unzip the driver special modes in any convenient place.
[8] We connect the switched off smartphone to the PC. For 2 seconds, an unidentified device appears in the manager ... Quickly, until it disappears, tap on it - in the appeared window, clickUPDATE DRIVERand specify the path where we unpacked the driver. if you did everything correctly, then when you connect a switched off smartphone, the following device will appear for 2 seconds:
[9]
Attached Image

[10] Now you can install the firmware.Disconnectsmartphone from pc

[11] Run the programFlash_tool.exe- it lies with the firmware folder in a subfolderUpgradetool
[12]
Attached Image

[13] Press the Scatter-Loading button, go to the folder with the firmware in the subfoldertarget_binand select the file MT6582_Android_scatter_emmc.txt. In the case of a messageIcorrect scatter File format- check the name of the packer of the flasher (as short as possible with Latin letters and / or change the version of the flasher itself.)
[14] Tick-DA DL ALL WITH Cheksum(If the firmware is carried out without this checkbox, the device does not start! This is not fatal, but you will have to flash it again)
[15]
Attached Image

[16] Push button Firmware upgrade
[17]
Attached Image

[18] Now everything depends on the firmware and the device. If there is a Checksum.ini file in the firmware folder, then the status lines will run; this is a check of the integrity of the images. If there is no file, they will not run. If the check is started, you need to wait until it is over and the utility does not go into standby mode. If there is no check, you can safely connect the switched off device. Sew better withINSERTEDbattery.
[19] For some new devicesA-series- flashing does not start from the first connection. Make sure that the firmware has not started, the charging process is displayed on the screen and remove the cable from the phone. wait half a minute and re-insert the cable.Nothing to do on the PC.
[20] Another detail is that sometimes Checksum.ini contains incorrect information about the volume of images. In this case, after running the check, the error window will appear (we have not yet flashed the device and didn’t connect it, right?) In this case, if you are sure that you downloaded everything correctly and the archive unpacking by the archiver was completed without errors, close the flasher. On the PC file manager, go to the folder with the firmware, delete the file Checksum.ini and repeat the steps starting from the 11th. If everything is okay - skip this item.
[21]Another mistake that occurs very often.
[22]
Attached Image

If everything is okay - skip this item..
Attention to the screen - the scatter is selected and the key is pressedFirmware upgrade- everything seems to be correct. but the error has taken off. And it flew because the flash driver for some reason could not CAM automatically load the FAC section - there is no check mark and no path to the image. Not scary, click OK in the message. Next, look at the screen: Make two clicks of the mouse on the selected image (the one without a tick)
Attached Image

The explorer will open (your folder with the firmware image will openTarget_bin:
Attached Image

Make two clicks on the missing image. It is with that name, remember the list, which was not ticked. I draw your attention, just choose the same name. If there is an error, there will be a brick. now everything is done correctly - look at the screen - all the checkboxes are in their places:
Attached Image

You can click Firmware Upgrage and flash the device
23. OFFSmartphone connect the device to your computer via USB. The firmware will start automatically.
24. Wait until the end of the firmware (may take considerable time) At the end of the firmware, you will see the following window.
25.
Attached Image

26. Disconnect the device from the USB of the computer.
27. Turn on the machine.
Link to the original instructions
How to get to Recovery
[1] Turn off the phone
[2] Press the volume buttons+ and -
[3] Holding the volume buttons, press the power button and wait until the Lenovo logo appears. After the label appears, you can release the on button.
[4] When the Recovery screen saver appears, you can release the volume buttons.

Video instructions

Installing official OTA updates (s147,150,161)
Preloader recovery
Recovery / Kernels
Patches
miscellanea
Radio modules
Desktop themes
Different for individual firmware

GPS MTK setup for receiving a signal in Ukraine. (ROOT)
Solving the problem with internal memory on ALPS (L1) firmware (Android 5.1)
Solving the problem with the sound in headphones and speaker!
Customizing Lollipop 5.1 under Nougat 7.0 Lite
Bootanimation
Installing Magisk to Magisk 16.0
Customizing Lollipop 5.1 under Nougat 7.0
Cleavers for LineageOS
Patch to fix the front camera in the firmware AOSP by KssMan
Xposed installer for CM13
Patch - port for Lenovo A536
Customization for Android 8
Sound enhancement on all firmware
CUSTOM LOGO
Android screen loading logo in 6.0 style
Extend the life of the battery. (Drip Charging)
Styling for Android N
Mini Life Hack Video Recording
Screen Boot Logo (Bootlogo)andstill
Troubleshooting gps
Permission to read and write to the memory card / Ready method
ERRORS SP FLASH TOOL AND THEIR SOLUTION
YOU TUBE VIDEO - 720p
YouTube video as 720 / 1080p
Russified Light Gray Theme for TWRP 2.8.6.0®
AM3D ZERENE Audio Fx Equalizer
Xposed modules
Dolby ATMOS surround sound technology
The patch corrects the charging curve animation when the phone is turned off on any custom firmware
Poll results

Attached Image
Attached Image


There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedsnekt - 01.12.18, 09:34
Reason for editing: crDroid 3.8.9
snekt
Message#3
02.10.14, 22:28
sine ira et studio
*********
[offline]

Group: Moderators
Messages 3310
Check in: 31.08.12
Huawei P30

Reputation:-  1060  +

M
We move to subsectionLenovo
avtorik
Message#4
03.10.14, 04:39
I try to be good
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1180
Check in: 21.04.10
Xiaomi Redmi Note 4 4/64

Reputation:-  73  +

* Hrych43,I have 150 firmware, I installed it through TVRPAttached fileBETA-SuperSU-PRO-v2.08.zip(1.59 MB)


--------------------
Xiaomi Redmi 4X | AOSP Extended silent27
mr.vavero
Message#5
05.10.14, 04:38
Novice
***
[offline]

Group: Active users
Messages 44
Check in: 13.12.12
Xiaomi Mi 5S Plus Prime

Reputation:-  0  +

Good time of day))
Put the firmware)) flooded the donor IMEI. it seems replaced on the. I downloaded the update by air.
I reboot and me in recovery immediately. what is there to do?
wipe did. just rebuses. But still, again, the update is offered to download and again in Recovery: D
Frol_133
Message#6
05.10.14, 04:46
Visitor
**
[offline]

Group: Users
Messages 10
Check in: 22.09.14
Asus FonePad ME371MG

Reputation:-  0  +

* mr. vaverostock recovery?
avtorik
Message#7
05.10.14, 07:12
I try to be good
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1180
Check in: 21.04.10
Xiaomi Redmi Note 4 4/64

Reputation:-  73  +

* mr. vavero
more details, what firmware was installed, what recovery does it reboot to you ?? On other smarts, in such cases, it is usual to sew separately the core from the firmware in which it reboots


--------------------
Xiaomi Redmi 4X | AOSP Extended silent27
mr.vavero
Message#8
08.10.14, 03:50
Novice
***
[offline]

Group: Active users
Messages 44
Check in: 13.12.12
Xiaomi Mi 5S Plus Prime

Reputation:-  0  +

* Frol_133,
Recovery in SP Flash tools replaced the one that is here (TWRP)
Namely did as written here
http: //lenovo-forums.r.../8628-root-lenovo-a536

* avtorik,
A536 firmware (S147_140910_ROW) for PC
http: //lenovo-forums.r...BB%D1%8F-%D0%BF%D0%BA/
after it loads, asks to restart. Rebut in TWRP and that's it. 1) I did a wipe, did not help. 2) I just did a reboot of the system from the recovery, it did not help.

I have one nuance))
NVRAM donor, many thanks and LOW BOW "Hrych43". The phone has become a telephone. 5 day somewhere I already use it))
I could not change IMEI yet.
Mobile Uncle (AT teams), Change IMEI by Simka, MTK Droid. I tried)) without result))


I really want to pour MIUI on this unit, but LEWA is not bad either)))

Post has been editedmr.vavero - 08.10.14, 03:51
avtorik
Message#9
08.10.14, 15:33
I try to be good
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 1180
Check in: 21.04.10
Xiaomi Redmi Note 4 4/64

Reputation:-  73  +

* mr. vavero
What firmware are you trying to upgrade to 147 from?


--------------------
Xiaomi Redmi 4X | AOSP Extended silent27
mr.vavero
Message#10
11.10.14, 22:55
Novice
***
[offline]

Group: Active users
Messages 44
Check in: 13.12.12
Xiaomi Mi 5S Plus Prime

Reputation:-  0  +

* avtorik,
I already have s147_140910_row.
and then there is something s150_140925_row
Grigasproxzqt
Message#11
14.10.14, 15:08
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2052
Check in: 08.10.13
Apple iPhone 6

Reputation:-  1223  +

downloaded the SP Flash Tool opened the unpacked folder and there is no mention of this file MT6582_Android_scatter_emmc

This file should not be in the archive with the program itself, but in the firmware.
I'm trying to find in this body. usb debugging is also zero

go to Settings ->About phone ->Version Information ->7 times you tap on the Build number, get the developer menu. In the settings, find this menu, there is this item.
Before that, there were two smatras and all were ruled in two clicks.

If Android 4.2, thenby thisnormally rutted.
Dahakax
Message#12
14.10.14, 18:50
a guest
*
[offline]

Group: Users
Messages 2
Check in: 16.02.13

Reputation:-  0  +

I have a question after clicking on Download, I don’t have to "agree that not all sections will be flashed"
it's ok, here's the photo and more correctly, I pointed out that file
Attached Image


Post has been editedsnekt @ - 05.05.15, 12:08
Reason for editing: The rules of the section "Android - firmware" p.3.8.
Djomy4
Message#13
15.10.14, 09:06
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 263
Check in: 06.04.12
Meizu M6 Note 3/16/32

Reputation:-  49  +

Good day! Got root on this device in this way:
1) Download DingDong Root MANDATORY VERSION 1.3.5, until we start
2) Download, install SuperSU until we start
2) Run DingDong Root, click to get root
3) after the window comes out with a reboot, click ok and DO NOT RESTART
4) Go to SuperSU, update the binary file
5) If the update is successful, we restart everything. Route received and will not fly off after a reboot

Post has been editedDjomy4 - 15.10.14, 12:02


--------------------
mr.vavero
Message#14
18.10.14, 11:59
Novice
***
[offline]

Group: Active users
Messages 44
Check in: 13.12.12
Xiaomi Mi 5S Plus Prime

Reputation:-  0  +

The real guys will soon be praying so the guys from "MIUI" or "LEWA" will make the firmware for our awesome device))
Ruth received and wrote above as. Chet MTK Android today changed IMEI to relatives, as it was the first time it was patched and erased: rofl:
But Hrych43 helped me by sharing my nvram backup.
So now I know what to do when you sew through SP Flash toools))
If you have any questions, write in a personal. I will try to help)): D

Post has been editedmr.vavero - 18.10.14, 11:59
patrick2000
Message#15
19.10.14, 07:43
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 252
Check in: 26.03.13
LG V20

Reputation:-  15  +

Guys, I'm flashing the phone, on the 8th percent there is an error 3060, I tried to connect it from behind, as well.

Post has been editedpatrick2000 - 19.10.14, 14:00
jasinov
Message#16
19.10.14, 12:00
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 65
Check in: 09.12.11
Sony Ericsson Xperia X8

Reputation:-  1  +

Good day to all, I won this device, installed the recovery from the header, installed the super user, everything went well. I made a backup of all sections. But there is such a moment with the navitel, I deleted it through the applications and now I try to install the broken one but it gives me what the application is worth or the certificate does not match, I installed the titanium, it shows that the navitel is removed, I later installed the Root Explorer through the search for 2 folders with files Navitel but I can not delete. Advise me how to demolish the built-in navitel.

The firmware is on my A536_S128_140624_ROW
jasinov
Message#17
19.10.14, 18:09
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 65
Check in: 09.12.11
Sony Ericsson Xperia X8

Reputation:-  1  +

I solved this problem in this way. 1) installed Root_Explorer_3.2 2) stitched into it and through the search entered navinel and found all the files that remained in the system 3) deleted them all 4) installed broken navitel and everything became and started

Attached files

Attached fileRoot_Explorer_3.2.apk(2.32 MB)
Hrych43
Message#18
27.10.14, 08:48
down
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6672
Check in: 14.07.12
Nomu S10

Reputation:-  888  +

* jasinovYou need to put stock recovery, then the bodies will be updated normally


--------------------
I wish to ALL
Grigasproxzqt
Message#19
27.10.14, 21:21
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2052
Check in: 08.10.13
Apple iPhone 6

Reputation:-  1223  +

* Agla73,putthis rooton 4.4 works fine
Grigasproxzqt
Message#20
27.10.14, 22:21
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2052
Check in: 08.10.13
Apple iPhone 6

Reputation:-  1223  +

* Agla73,Well, you need to put a patch, it adds the coveted files to the system for root) If you put just an application, when there is no root on the phone - it will not work
Agla73
Message#21
28.10.14, 05:40
Visitor
**
[offline]

Group: Active users
Messages 16
Check in: 18.12.10
Sony Ericsson K750i

Reputation:-  0  +

The fact of the matter, put through the recovery- unroot
Lenovo
 

1668 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 23:28