> Attention

Attention! All questions on the programs that are not in this section, ask in the subject. Ambulance for beginners .

IN THIS SECTION ONLY THE PROGRAM CATALOG! CREATING THOSE QUESTIONS IS FORBIDDEN! SEARCH PROGRAMS .
New threads need to be created only inroot partition! In the future, they will be processed by moderators.



XGuru | acceleration and deceleration XScale processor



Rep: (259)
Xguru
version 5.3

Attached Image

Description:
Free software for fine-tuning the frequency of the processor Intel | Marvel XScale series PXA25x / 26x / 27x

Opportunities:

  • Flexible change CPU clock from the minimum to the maximum possible
  • Changing the system bus frequency in a wide range of
  • Change the necessary multipliers and dividers
  • Display processor speed in the service area of ​​the screen
  • The overhead information about the processor (manufacturer, model, revision, cache, frequency loading)
  • Details of the battery (the charge, voltage, current, temperature)
  • Other useful information (system, screen, memory usage)
  • of active processes and information flows with the possibility of closing
  • The reset function (rebooting or complete purification system)
  • The ability to save user settings
  • Management of the program from the command line
  • Support for high resolution displays (VGA)
  • Transition to RealVGA mode (for VGA screens)
  • Selection screen orientation (mode 4)

Recent changes:
  • added to the constant tracking mode frequency change

System requirements:
CPU:Intel XScale series PXA25x / 26x / 27x
Operating System: Windows Mobile 2003 / SE / 5.0
Regional Settings: Russia
Screen: QVGA, VGA, RealVGA

Notes:

  • On processors other than Intel XScale PXA25x / PXA26x / PXA27x program works with limited functionality (not possible acceleration)
  • Before starting the program it is recommended to turn off (if any) built-in automatic adjustment of the processor PC
  • Any CPU PXA270 series (including 312 and 416 MHz) is capable of operating at a frequency of at least 520 MHz (or 624 MHz)
  • The upper limit frequency of the processor depends upon the particular sample, as well as specific features of the PDA model
  • A strong increase in processor speed may lead to a hard reset the device with complete loss of information (except for the memory card)
  • In order to increase productivity it is recommended to increase not only factor, but also the system bus to an upper limit of stable operation
  • To increase the battery life of PDAs is advisable to reduce not only the operating frequency (up to 104 MHz), but the brightness of the screen
  • On some models CCP change the system bus frequency can cause screen flicker (display controller changed frequency)
  • To avoid high frequency random selection from the menu set an upper limit for frequency selection menu
  • For ease of use it is recommended to assign the program to one of the hardware buttons
  • To use RealVGA mode requires a QVGA Resource Library
  • Working with the command line: # 1 - 104 MHz, # 2 - 208 MHz, ..., # 8 - 832 MHz, # 9 - Customized

Homepage: www.lobyte.net

Download:
Resource Library RealVGA mode for WM 2003 SE: Attached fileimg-6435-QVGA.zip (108.62 KB)
Resource Library RealVGA mode on WM 5.0: Attached fileimg-8169-RealVGA_WM5.zip (260.93 KB)

Version 5.3: Attached fileXGuru_5.3_cab.zip (21.09 Kb)


Post has been editedkzvs - 09.05.10, 16:05



Rep: (1)
I ask: do potderzhku Marvel Pxa 3xx.



Rep: (15)
HP hx2190b - from 312 to 624 - normal flight ... Tried more pohimichit with multiplier and FSB, the result - 675 and more hangs tightly ... But the dispersal of 50% is already very good :) Great programm ... Although .. . Ability to get get more, because there is a possibility that the crackdown ran into the RAM ...



Rep: (6)
O2 xda flame. After artful manipulations excellently worked on bus 260 and a frequency multiplier 2.5
After some time, I began to hang on bus 247. Why?
ps figured out, it was necessary to turn off the deep idle vchange cpu in flame settings.
260 * 2.5 memory in half.

Post has been editedDrvooodoo - 13.01.12, 22:48



Rep: (0)
I LOOX 720 slightly skates rejecting ... hr..vso the new place, I want to hang: suicide:



Rep: (0)
On hp 2190b when the program began to move across the screen band, and it is, after normal work during 7 years. :(
Demolished, set PHM, like running and no bands.
The truth is now the plow instead of 585 MHz only on the 550 MHz, more hangs.

Post has been editedKikujiro_SPb - 20.09.13, 20:29
Reason for editing: word-parasites



Rep: (20)
Nijor @ 20.09.2013, 22:05*
The truth is now the plow instead of 585 MHz only on the 550 MHz, more hangs.

It seems that affected aging processor chip. Now he has become less stable


Full version    

Help     rules

Time is now: 13/05/20, 22:28