Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
MegaFon Login 3 - Firmware |
Message#1 22.09.14, 23:32 | |
Plastun [offline] Group: Friendssavagemessiahzine.com Messages 490 Check in: 20.12.13 MegaFon Login + Reputation: 212 | MegaFon Login 3 (tablet) - Firmware MFLogin3T Description | Discussion � | Purchase � | Accessories � | Marriage � | Games and apps � | Modification of software and decorations � | Owners Club � | Firmware� Recovery The last attempt to revive MFLogin3t Tablet recovery algorithmavava Backup and restore tablet NVRAM (IMEI, MAC, radio settings) program BigButton3by vevs ��������� ���������� downloadon the backup and restore the tablet program HDDRawCopyavavaSystem images System Image (v5.0.8.0)by Tanir (.imgc (666 MB),full stock tablet from the store) System Image (v5.1.8.0)by darwinok17 (.imgc (706 MB), .zip (645 MB)) Step-by-step instructionon copying tablet data using Active File Recoveryavava Saved files Library of stock (v5.0.8.0) applications and files MegaFon Login 3avava Tablet wallpaperfrom Ruslan2001 Stock bootanimationby studmix88 The way to update the radio modulefrom amerika09,Radio module B18-V0.4.7from amerika09. Repair IMEIfrom evilusThe specified method of restoring IMEI leads to problems with communication (the radio module stops working) Step-by-step instructionMicroSD Card Recoveryavava Restoration from brickby yura2803 Resurrection techniquefrom 52reg Solving the problem of endless download and the string "Hello"loathean General principles for repairing bootloaders on Qualcomm, HS-USB QDLoader 9008, HS-USB Diagnostics 9006, QHUSB_DLOAD, etc. Firmware Firmware Official firmware Unfortunately, there are no official firmware from Megafon in public access. Official updates Updates distributed by MegaFon on FOTA (updates "over the air"). This method is not optimal, because checks the originality and integrity of each file being replaced, thereforeInstallation is allowed only in the correct sequence, with version control and strictly on stock firmware. Those. if you made any manipulations with the firmware of your device (received root, put patches, replaced recovery or any other component) - the installation of these updates will not be completely completed, which is guaranteed to lead to problems during operation. Use this update method only if you know exactly what you are doing! v5.2.5.0- it was in this update that the ability to transfer applications to the SD card appeared.Screenshotsfrom 1375maximus v5.1.8.0 v5.1.6.0 v5.0.9.0- This is an update test, when you apply it sequentiallycan't(i.e. after 5.0.8.0, you must install 5.1.6.0 right away). v5.0.8.0 v5.0.7.0 Thanks for updates thanks to usersandykk, illarion958, Ruslan2001, vevs Unofficial firmware � Backup stock firmware Installation TWRP The easiest way is to use the vebs BigButton script, performing installation of patches without permanent firmware modrekavery into the device (only one-time loading it into memory is performed). The current version of the script, containing the latest version of the moderation from vevs: Bigbutton Step-by-step instructionto install Vevs firmware and patches using BigButtonavava Video "The process of flashing megaphone login 3"by nano200 - Is it possible to install only patches from vevs through BigButton, and the rest through moderation? Through BigButton you can putanything. - After selecting a patch, the message "error: more than one device and emulator" You must first remove the Android emulators installed on your PC (like Bluestacks). - When flashing via BigButton, the adb server did not ACK error appears Solution 1from leo150;Solution 2by piont - Is it necessary to enable the “Debug USB” mode in the “For Developers” menu before installing the ADB drivers when flashing through BigButton? No, FastBoot mode and ADB in Recovery are in no way connected with the setting of this parameter. Those. if it's about working with BigButton, the scheme is: 1) launched in FastBoot ->put the driver ->checked in the window 2) Recovery is booted ->put the driver again ->checked in the window. And the firewood for the already loaded tablet - if necessary, we put it for the third time. In all three modes, different usb_id. Original postDecker, original postvevs. Unlock NCK code for all -56991019. Thank youvevs () for the found code. Unlock process: insert a SIM card from another operator, enter the code. Important: Simka must be officially registered with the operator; “left” and modem SIM cards will not work! Archive In Russia, the tablet will only work with a MegaFon SIM card (it is locked to the operator). At the same time, the SIM-lock is installed so that abroad the tablet will work with any SIM-card of local operators. That is, the list of prohibited networks is limited only by Russian competitors. It is possible to restore a SIM-card lock only with the firmware of your own image created by the HDDRawCopy program.! (see spoiler"RESTORATION") Unlock tabletfrom maximus10 Step-by-step instructionon unlocking the tabletavava Drivers Qualcomm drivers for Windows XP / Vista / 7/8 (x86-x64) Driver_Qualcomm.7z(9.27 MB) ADB drivers for Windows XP / Vista / 7/8 (x86-x64) AdbDriverInstaller.exe(9.0 MB) ADB drivers for Windows (x64) Android + ADB + driver + x64.zip(11.18 KB) - Driver package Driver_Qualcom_m.7z (9.27 MB) is not installed on the PC (Win 7 x64). The above installation package contains drivers for 64 bit systems. Try rebooting by pressingF8, choose "Disable mandatory driver signature verification". And then try to install the Qualcomm driver again. This OS boot mode will install any drivers, but after restarting the computer, the signature verification will turn on again, but the installed drivers will work. - How to disable driver signature on Win 8.1maratan Video instruction "How to install the driver for the firmware in Windows 7 and Windows 8, 8.1?" - The PC does not recognize the tablet when connected Any operations associated with connecting the tablet to a PC, perform a fully charging your device, and to connect, use a known good cable (without extension cables and hubs) andUSB 2.0on the back of the system unit. If it does not help, then remove all previously installed tablet USB drivers (but it is possible that USB drivers from other devices are interfering) using a small program.USBDeviewReinstall the tablet drivers (from the topic header) by first disabling the antivirus and firewall. Do not forget to restart the PC (sometimes it helps to restart in Safe Mode). Useful miscellanea Touchscreen enhancement Repair IMEI, MAC, radio settings. AutoRoot for v5.1.6.0 and v5.2.5.0from Ruslan2001.Instruction How to remove rootfrom Ruslan2001,How to remove rootfrom Decker,How to remove rootby nano200 Remove pre-installed appsby piont Program for automatic translation of code for unlockfrom Ruslan2001 Returning access to ADB on 5.1.6.0from decker backup of the system section directly on the PC, bypassing the SD cardfrom decker Transferring the / data folder to the second section of the sd card] by andrey69rus Installing recovery in .img format without PCby darwinok17 Installing applications by default on the SD cardby amerika09 Sections and their purposeby chelaxe Backup network module configuration filesfrom evilusSettings filefrom amerika09 (source file extension is * .qcn) Change the mac address of the wifi card before rebootingby MinDeR_ Change splash screenby studmix88 Batch file for splash screenfrom Ruslan2001 Archive Transferring applications to a memory card on stock firmware (below 5.2.5.0)by blueelephant Transferring applications from internal memory to the second section using Link2SDfrom vitas197803 The method of partitioning SD card sections without a PCfrom Olegermakov59 Root installationfrom Decker,Root installationfrom Ruslan2001,Root installationby krokot84 New version of Recovery NoSigCheck / Deckerfrom decker Installing Mod. Recover Deckerkilling em all Vevsa scriptby tolkus Patch login3_modpatch.zipby vevs Patches and modificationsby andrey69rus Theme File Archiveby getto05 Archives for firmware via mod recoveryby studmix88 Deodexed firmware deodex_mflogin3.zipby studmix88 Mflogin3_rom.zip firmwareby studmix88 Infinity Rom v.0.1 Firmwareby studmix88 Firmware prestigio, Firmware prestigio v.1.1.02from 52reg Firmware prestigioby darwinok17 smart keyboardby studmix88 smart keyboardfrom DIMA @ 1977 Stock recovery method recoveryfrom decker Receiving IMG file recoverylekars Recovery Instructionsby SokolDemonStar Installing vevs patchesby JcLeRoy Install updates and patchesby yura2803 _FastbootOn.cmd command file for running BigButtonby JcLeRoy Backup and restore tabletmishkew Tablet hangs on the word "Hello" when installing a patchfrom topvin.j Coreby studmix88 Test AnTuTu Benchmark 08.22.2014bitinn AnTuTu Benchmark 09/10/2014avava AnTuTu Benchmark 09/23/2014from DIMA @ 1977 AnTuTu Benchmark 10/20/2014from DIMA @ 1977 FAQ - Who is the author of this topic? The author and honorary curator is a respectedstudmix88 - How to maximally (but safely) increase the capabilities of MegaFon Login 3? 1. Create a system image of the tablet program HDDRawCopy (see spoiler "RECOVERY") 2. Install the modified firmware from Vevs'a (ALL preinstalled third-party software has been removed, Google services are pretty thinned out, root installed, modified recovery, audio patch installed and a full-featured (as far as possible in KitKat) SD card, menu enable_adb in the Qualcomm service menu) (see spoiler "FIRMWARE / Firmware / Unofficial firmware / Modified") using BigButton (see spoiler"FIRMWARE / INSTALLATION"). For the modified firmware 5.2.5.0 from Vevs'a also install a patch for full-fledged work with an external memory card (see spoiler" FIRMWARE / Patches "). 3. If desired, unlock the SIM card (see spoiler "UNLOCKING") - OTG is? Not. I repeat - not at all! And it will not be! And through the engineering menu will not, and with external power will not be! Not at all! - Is it planned to update the operating system installed in MegaFon Login 3? No, the Android version will not be updated. - Is it possible to correct the decrease in the sensitivity of the microphone in the official update v5.2.5.0 from MegaFon? Yes you can. Take advantage of "a patch to improve the sound in headphones"from vevs (see spoiler"FIRMWARE / PATCHES") or modified firmware from vevs, which already contains this patch (see spoiler"FIRMWARE / Firmware / Unofficial firmware / Modified"). - Do you plan to release a new patch by MegaFon? Yes, there will be a patch related to the bug of degrading microphone sensitivity in version 5.2.5.0. - Is it possible to make a backup of the tablet before performing actions on firmware / software update / patch installation? Yes, it can and should be!It is strongly recommended to make a backup of the system using HDDRawCopy before updating, flashing or doing anything dangerous with the device!(see spoiler "RECOVERY"). - Is it possible to restore the tablet performance after unsuccessful actions or failure? Yes you can (see spoiler "RECOVERY"). - Are there official firmware for MegaFon Login 3? Unfortunately, there are no official firmware from Megafon in public access. - Is there any unofficial firmware for MegaFon Login 3? Yes there is. Modified firmware from vevs. They removed ALL of the pre-installed third-party software, pretty thinned out Google services, installed root, modified recovery, audio patch and implemented full (as far as possible in KitKat) work with an SD card (see spoilerFIRMWARE / Firmware / Unofficial firmware / Modified"). - Does MegaFon Login 3 have a custom counter? There is no service counter that identifies the number of non-factory firmware flashed into MegaFon Login 3. - Is it possible in the modified firmware 5.2.5.0 from Vevs to achieve full-fledged work with an external memory card? Yes you can. Install the patch for full-fledged work with an external memory card from Vevs'a (by turning off the internal emulation) (see spoiler "FIRMWARE / PATCHES"). - What are Root-rights and what are they for? This is an administrator account giving you unlimited control over the system. One should be aware that even obtaining Root rights is an invalidating guarantee, especially if after the changes made in the firmware it is not possible to roll back the system to its original state. Before going to the service, in order that you would not be denied a Root access guarantee, you will need to delete it. - Is it possible to get Root in MegaFon Login 3? Yes you can. Take advantage of "patch to get Root"from vevs (see spoiler"FIRMWARE / PATCHES") or modified firmware from vevs, which already contains Root (see spoiler"FIRMWARE / Firmware / Unofficial firmware / Modified") using BigButton (see spoiler"FIRMWARE / INSTALLATION"). You can also use the program"AutoRoot for v5.1.6.0 and v5.2.5.0"from Ruslan2001 (see spoiler"DIFFERENT"). - Is it possible to safely remove some programs after receiving Root? - Yes, you can. - Is it possible to unlock the tablet to work with SIM-cards of other operators (Beeline, MTS, etc.)? Yes you can (see spoiler "UNLOCKING"). - Can I overclock the processor? Not. So far we have a limited set of governors and the regulation of the frequency is only down.Undervolting is not available. - Is it possible to install microSD on 64Gb? Yes, it is quite possible, but remember that the maximum, stated by the manufacturer of the tablet, the amount of memory card: 32 GB - Is it possible to transfer applications to the SD card in MegaFon Login 3? Yes you can. Use the official update v5.2.5.0 or (the best option) with any modified firmware from vevs (see spoiler "FIRMWARE / Firmware / Unofficial firmware / Modified"). - What is Recovery? This is the bootloader mode, created to be able to restore the device in case of damage to the firmware, etc. Factory Recovery allows you to flash only the original factory firmware. It has a minimum set of functions. - Are there any alternative CWM or TWRP assemblies for our device? Exist. There is a TWRP. - How to decrypt the error that appeared in the Recovery mode? Use the "Volume +/-" button to select the menu item "Apply update from adb"Recovery mode. Error decoding is contained in the string"EMMC: / xhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh" has unexpected contentswherexxx- and there is the content of the error Tablet freeze during update via FOTA (by air) - Error "Status 7" when updating If decoding error mode "Recovery"contains" EMMC: /dev/block/platform/msm_sdcc.1/by-name/sbl1... thenSolution 1; Solution 2; The firmware from vevs already contains the correct sbl1 If decoding error mode "Recovery"contains" EMMC: /dev/block/platform/msm_sdcc.1/by-name/modem... thenSolution 1, Solution 2. - Codes of possible errors CWM Status and their solutions - How to upgrade MegaFon Login 3 firmware via FOTA (partial or full firmware update over the Internet "over the air")? To update via FOTA (English Firmware Over The Air) you need to connect to the Internet and check for available updates inSettings ->About tablet ->System update->Check now. If there is an update, the device offers to download it (as a ZIP file for native (stock) Recovery) and install it. After downloading the update file, the device automatically reboots into Recovery mode and installs the update. Then the device is rebooted, and the ZIP file is deleted. - Why does the official update not come through FOTA (by air)? To update via FOTA you need to connect to the Internet. Next you need to check for available updates inSettings ->About tablet ->System update ->Check now. Updates via FOTA do not come due to many reasons - including the lack of available updates, problems with the MegaFon update server, lack of communication for one reason or another, you have a fresh firmware version or modified firmware or Recovery files (in this In case you have an inactive menu itemSystem update). - Is it possible to install the official update, because it does not come \ is not installed through FOTA? Yes. can. Attention! Installation is only allowed in the correct sequence (v5.0.8.0 ->v5.1.6.0 ->v5.1.8.0 ->v5.2.5.0), with version control and strictly on stock firmware. Download updates (see spoiler "FIRMWARE / Firmware / Official updates") and copy the files to the root of the SD card (without unpacking!). Enter the mode"Recovery"(stock). Button"Volume +/-"select menu item"apply update from sdcard"and then the required update file. - Is it possible to install official firmware through native recovery? And it is not official. Only Update'y (ie diff'y), full'a - no. So through native recovery, you can flash updates, but unofficial firmware posted on the forum is not, because they will not pass signature verification. - Can I reset the pattern? Yes you can. Enter mode "Recovery"and selecting"Volume +/-" menu item "wipe data / factory reset"confirm with"Turning on". By selecting"Volume +/-"string"Yes - delete all user data"confirm selection with"Turning on". Waiting for the message to appear on the screen."Data wipe complete"select with"Volume +/-" menu item "Reboot system now"and confirm with"Turning on". - How to enter the "Recovery" mode? Turn off the tablet. Simultaneously press the "Turning on"and button"Volume +"holding them until the tablet goes into mode"Recovery". Screenshots. - How to enter the "Bootloader" mode (FastBoot)? Turn off the tablet. Simultaneously press the "Turning on"and button"Volume -"holding them until double vibration (sometimes you have to wait for a long time) and the appearance of the inscription"Powered by Android"(do not drop the buttons immediately after the vibration!). When you see the inscription, release both buttons and connect the tablet to the PC. - Going to the "FastBoot" mode, the tablet with the inscription "Powered by Android"lies to infinity. Check if the checkbox is checkedMTP"in the blind"USB connection to computer". - How to enter the "DFU Mode" mode? Method 1. Turn off the tablet. By pressing and simultaneously holding the "Volume +"and"Volume -"connect the tablet to the computer. The tablet vibrates twice, blinks, the green LED lights up, the screen is black." Method 2. Turn off the tablet. Simultaneously press the "Turning on"and button"Volume +"holding them until double vibration and the appearance of the inscription"Powered by Android". Shortly release both buttons, and then press them again and hold until the inscription disappears on the screen. The green LED lights up, the screen is black. - How to make a screenshot of the screen? Simultaneously press the "Turning on"and button"Volume -" - How to enter the engineering menu? The command to enter the engineering menu:*#*#4636#*#* - How to view information about IMEI? The command to view information about IMEI (international mobile equipment identifier):*#06# - Where are the radio and IMEI settings stored? IMEI and radio module settings are stored in the modemst1 and modemst2 sectionstherefore, it is not advisable to reflash them using someone else’s image. - Why is the sound in the headphones bad? There is a patch to improve the sound in the headphones from vevs (see spoiler "FIRMWARE / PATCHES") In the modified firmware from vevs, there is initially a patch to improve the sound in the headphones (see spoiler "FIRMWARE / Firmware / Unofficial firmware / Modified") - With which firmware is the processor frequency reduced? From V5.1.6.0. processor frequency is reduced by 100 MHz (from 1200 to 1100 MHz). - How to enable USB debugging? 1. Go to - "Settings" -> "About tablet" ->press several times (3-4) on the line "Model - (MFLogin 3T)"- you will open the menu"Qualqomm". Go to"enable_adb"and activate item -"USB debugging". 2. Go to - "Settings" -> "For developers". In the upper right corner, slide to enable the slider and click"OK"in the message that appears. Put a tick in the line"USB debugging". - Missing item "enable_adb"in the engineering menu" Qualcomm " Starting with version 5.1.6.0, Megaphone removed the item "enable_adb"from the Qualcomm engineering menu. Solution: 1. Patch switch, (de) activating Qualcomm ADB mode, necessary to unlock the device (see spoiler "FIRMWARE / PATCHES"). 2. Returning access to ADB to 5.1.6.0 (see spoiler "DIFFERENT"). 3. In the modified firmware from vevs, a tick enable_adb is initially available (see spoiler "FIRMWARE / Firmware / Unofficial firmware / Modified") - There is no item "For developers" in the "Settings" menu Go to "Settings" -> "About tablet" ->press several times (6-8) on the line "Build number V5.X.X.0"until a popup message appears"You became a developer". On the menu "Settings"a new item will appear"For developers". - When the mode "USB debugging" at "enable_adb"The tablet is visible in the ADB, but hangs in the status"unauthorized" It is necessary to confirm the digital fingerprint RSA on the tablet. If nothing comes out, go to the developer menu, click on "Deny debug access with ADB"(with USB disabled) and click on"Ok"Then you connect to your computer, and you will be waited on the tablet with a cherished inscription, where you just have to click a tick andOK". - How to load the tablet in "Safe Mode" (Safe Mode)? Press and hold the "Turning on"until the power off menu appears. Press and hold the menu item"Power off"Until the safe mode menu appears. Confirm entry to safe mode with "Ok". The tablet will restart and a notification will appear at the bottom of the desktop "Safe mode" - Process com.qualcomm.fastdormancy wakes tablet too often The process can be frozen. It can be useful for those who do not use services that require background work with the network in sleep mode (ICQ, Skype, etc.) - Does the kernel support swap? Swap is. - Identified spontaneous reboot tablet There are no solutions to reboot problems. Or take the tablet under warranty or (risking losing the warranty)look for the firmware that is suitable in terms of stability. There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators). Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editeddestroyer71 - 16.04.19, 16:52 Reason for editing: BigButton |
Message#2 26.08.14, 23:19 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | studmix88it doesn't matter. Here is the recovery method of stock recovery, you can in the header: 1. Connecting to the tablet in the ADB mode, if anyone has the old version of ADB and all the time writing adb devices device device, the solutionhere. 2. Next, do -adb.exe reboot-bootloader, to reboot the tablet in the bootloader. 3. Check -fastboot devicesThe device must be in fastboot mode. 4. Download the original 3e recovery -recovery.img.7z(7.58 MB) 5. fastboot.exe flash recovery recovery.img 6. fastboot.exe reboot Recovery restored. Post has been editedavava - 04.01.15, 17:21 Reason for editing: In the header: tablet_za: -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#3 27.08.14, 10:46 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4138 Check in: 06.04.12 Xiaomi Redmi 5A Reputation: 600 | Since the Faq for installing Root is on the old site, we publish it here: 1. Download the archivemt4a_root.7z(9.22 MB) , inside you will find: image-new.img - recovery image with disabled digital signature verification, platform-tools_r19.0.1-windows.zip - the latest version of adb and fastboot to work with Android 4.4, update.zip - actually custom update to get root. 2. Unpack the archive, also unpack the platform-tools, put image-new.img in the folder with the platform-tools. 3. Connect the tablet and upload update.zip to the internal memory (!) 4. Activate on the tablet developer options and debug via USB. 5. Run the cmd.exe command line in the platform-tools folder. 6. We type adb devices, if you did everything right, then you should see the connected device. Those. in the List of devices attached there should be something. like 5d619130 device. 7. We do adb reboot-bootloader to reboot into bootloader mode. 8. Next, we check fastboot devices, if you see that your device is in fastboot mode, then you can flash modified recovery. 9. fastboot.exe flash recovery image-new.img we sew Recovery NoSigCheck and reboot the tablet, you can via fastboot reboot. 10. Recovery NoSigCheck is flashed with us, turn off the tablet. Hold the Volume + button and press the power button to load into Recovery. 11. If you did everything correctly, then in the Recovery header you will see the Recovery NoSigCheck / Decker line, like on the picture. 12. Now select Apply Update from Internal Storage and point it to update.zip in internal memory. After the installation is complete, the su binary will appear in / system / xbin. 13. root has already been received, but it would be nice to put some utility for managing rights. 14. Run on the Google Play tablet and install SuperSU from there. 15. When you first start the utility will say that it was not bad To update the version of su, we agree and choose the normal update mode. Then we reboot the device. 16. Everything. Full root received. You can put Root Explorer and enjoy. Thanks you can tell users 1. ruslan_3_- method of assembling / disassembling stock recovery 2. Decker- The author of the article, Recovery NoSigCheck patch. >>A source<< Post has been editedavava - 04.01.15, 17:24 Reason for editing: In the header: tablet_za: |
Message#4 27.08.14, 17:29 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | Then they asked the question - how to remove root, if for example you have to carry a device in the SC, etc. The first thing to do is to flash the original recovery, how to do it, I wrote inby thispost The recovery itself is attached in the same place (by the way, it would be nice to pick up the header, a link to the original recovery and a post to restore it). Then delete the su and daemon su files from / system / xbin (for example, via ADB), and then do wipe data / factory reset. Post has been editedavava - 04.01.15, 17:12 Reason for editing: In the header: tablet_za: -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#5 31.08.14, 15:16 | |
Plastun [offline] Group: Friendssavagemessiahzine.com Messages 490 Check in: 20.12.13 MegaFon Login + Reputation: 212 | -------------------- Thank God for everything! |
Message#6 15.09.14, 04:02 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | New version of Recovery NoSigCheck / Decker: Key features:
3e_recovery_no_sig_check_adb_4_mflogin3t.7z(8.15 MB) p.s.It can help in the case when you accidentally deleted something from the tablet and after that it does not load. Also, based on this recovery, it is quite possible to create recovery scripts, a la tar -cvf /sdcard/system.ext4.tar / system for backup of the system partition, and tar -xvf ... for recovery. True, since I don’t have an sd card at hand, then whether the sdcard is mounted correctly or not is not possible to check. p.p.s.Method of use - flash recovery via fastboot, boot into recovery, doadb shelland get root access to / system and / data ... (!)And of course, remember that the responsibility for the damaged equipment, as a result of inept actions / absurd accidents / accidental deletions of some files, incorrect installation of access rights, etc. - entirely lies solely on you.If you are not confident in your abilities, believe me, you do not need root access from recovery! Post has been editedavava - 04.01.15, 17:24 Reason for editing: In the header: tablet_za: -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#7 15.09.14, 22:51 | |
a guest [offline] Group: Users Messages 6 Check in: 22.01.08 Reputation: 49 | Free unlock tablet MegaFon Login 3 We will need:
IMEI: 865777020196745 Code: CFCFCFCFCECACBCCC6CF We are interested in the second lineCFCFCFCFCECACBCCC6CF According to this table we translate the code: CF - 0 CE - 1 CD - 2 CC - 3 CB - 4 CA - 5 C9 - 6 C8 - 7 C7 - 8 C6 - 9 Login3.rar(31.69 MB) K Added to the header Post has been editedvladigor - 16.09.14, 11:49 Reason for editing: Curator: added drivers and programs from other external sources and removed advertising site |
Message#8 19.09.14, 13:15 | |
a guest [offline] Group: Users Messages 4 Check in: 22.04.08 Motorola Moto G (3rd Gen) 1/8 Reputation: 1 | 5.0.9.0-test FW8978-MegaFon-delta-ota-v5.0.9.0.zip(10.37 MB) Post has been editedavava - 08.01.15, 09:33 Reason for editing: In the header: tablet_za: |
Message#9 19.09.14, 13:41 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 757 Check in: 25.10.05 Reputation: 15 | FW8978-MegaFon-delta-ota-v5.0.8.0-10.zip(288.47 KB) FW8978-MegaFon-delta-ota-v5.0.7.0-10.zip(31.53 MB) Post has been editedavava - 08.01.15, 09:33 Reason for editing: In the header: tablet_za: |
Message#10 19.09.14, 17:11 | |
【=◈︿◈=】 [offline] Group: Curators Messages 1472 Check in: 10.09.11 Apple iPhone SE Reputation: 166 | Perezal on Yandex.Disk, because the speed with 95.163.96.251 insignificant. Updates: v5.0.9.0 Download from Ya.Disk QR v5.0.8.0 Download from Ya.Disk QR v5.0.7.0 Download from Ya.Disk QR All one archive Download from Ya.Disk As already mentioned, it is advisable to install through stock recovery. It is a pity that no one managed to keep the structure / media /. Add to the cap. Post has been editedavava - 08.01.15, 09:33 Reason for editing: In the header: tablet_za: -------------------- |
Message#11 22.09.14, 07:24 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4138 Check in: 06.04.12 Xiaomi Redmi 5A Reputation: 600 | Native core | kernel boot_img.zip(7.08 MB) Decompiled kernel decompile_boot.zip(7.85 MB) Post has been editedavava - 04.01.15, 17:26 Reason for editing: In the header: tablet_za: |
Message#12 23.09.14, 11:17 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | This is not the official firmware, this is the backup of the partition / system "wrapped" in the zip for installation from the modified recovery: show_progress (0.100000, 1); ui_print ("extract busybox"); package_extract_file ("busybox", "/ busybox"); ui_print ("set permission"); set_perm (0, 0, 00755, "/ busybox"); ui_print ("fomating partitions"); unmount ("/ system"); format ("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "0"); mount ("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/ system"); mount ("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/userdata", "/ data"); show_progress (0.500000, 10); ui_print ("extract system.tar"); package_extract_file ("system.tar", "/data/system.tar"); show_progress (0.900000, 10); run_program ("/ busybox", "tar", "xpf", "/data/system.tar", "-C", "/ system"); delete ("/ data / system.tar"); show_progress (1.00000, 1); ui_print ("finish"); unmount ("/ system"); unmount ("/ data"); In addition, if in the / data section you do not have enough space to copy the system.tar from the zip, then the firmware will not be installed. Well and so, of course, a convenient way for those who can not deploy a backup system via ADB. root is present in this backup. To install this backup in the / data section there should be at least 536 Mb of free space. Post has been editedDecker - 23.09.14, 11:21 -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#13 23.09.14, 11:23 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | Megafon applications, as far as I can see, are removed from there. In any case, call itofficial firmware I would not. It is better to rewrite so - backup system for deployment through a modified recovery. Added root, removed standard applications from Megaphone. Post has been editedDecker - 23.09.14, 11:25 -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#14 23.09.14, 11:47 | |
XOR EAX, EAX [offline] Group: Friendssavagemessiahzine.com Messages 3220 Check in: 07.10.07 Alcatel Idol 4 BlackBerry DTEK50 Reputation: 1385 | Another problem with a memory card would be solved then in general the fire would be. If you mean the access of applications to write to the memory card - the technique is describedhereor you canSDFixtry (but to be honest, for example, I have not tried). -------------------- ■ 10% luck, 20% skill, 15% concentrated power of will ■Problems with MTP?■ Eating popcorn, read4 ... ■ |
Message#15 23.09.14, 12:10 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4138 Check in: 06.04.12 Xiaomi Redmi 5A Reputation: 600 | |
Message#16 23.09.14, 12:29 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4138 Check in: 06.04.12 Xiaomi Redmi 5A Reputation: 600 | vitas197803, update.zip(1.78 MB) fix keyboard # the keyboard will be on the side, but not on the system one, I think it will be much more convenient Post has been editedavava - 04.01.15, 17:20 Reason for editing: In the header: tablet_za: |
Message#17 23.09.14, 13:47 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1527 Check in: 09.10.12 Explay Surfer 8.31 3G Reputation: 243 | the keyboard will be on the side, but not on the system I think - it will be much more convenient One keyboard must be in the system firmware! When resetting to the factory settings via the menu, all third-party applications are deleted, and how then to install again each time, .. Pts is inconvenient: yes2: |
Message#18 23.09.14, 17:26 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 3077 Check in: 06.07.10 Xiaomi Mi Max Prime Reputation: 1598 | Test anttu after applying the patch from uv. vevs, before the application was / 11,700 /. Post has been editedavava - 04.01.15, 17:26 Reason for editing: In the header: tablet_za: -------------------- Xiaomi Mi Max 128GB |
Message#19 23.09.14, 18:16 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4138 Check in: 06.04.12 Xiaomi Redmi 5A Reputation: 600 | update_bootanimation.zip(394.64 KB) - buut animation / native / update_build_prop.zip(127.44 KB) - build.prop from 5.0.8.0 update_busybox.zip(706.02 KB) - busybox update_host.zip(816.96 KB) - ad blocking / updated / update_smart_keyboard.zip(1021.99 KB) - smart keyboardnow system update_fonts.zip(10.16 MB) - native fonts ###################### All archives are only for firmware via mod recovery Post has been editedavava - 04.01.15, 17:19 Reason for editing: In the header: tablet_za: |
Message#20 23.09.14, 19:55 | |
Visitor [offline] Group: Users Messages 14 Check in: 11.05.09 Meizu MX2 Reputation: 0 | vitas197803,About downloading something to the tablet through the recovery, there is an extension for Total commaderAndroid ADBThrough it you can climb in the device. Connection method is written in the link. By the way, the wipes do not seem to work in mod.recovery, only in stock. |
Message#21 23.09.14, 20:32 | |
Guru [online] Group: Friendssavagemessiahzine.com Messages 3077 Check in: 06.07.10 Xiaomi Mi Max Prime Reputation: 1598 | vitas197803,I rolled the patch on my native firmware from the box. Immediately noticed a performance boost. That patch /https://yadi.sk/d/Zv-H8JiNbd5AE Post has been editedavava - 04.01.15, 17:20 Reason for editing: In the header: tablet_za: -------------------- Xiaomi Mi Max 128GB |
mobile version | Now: 04/29/19 13:45 |