This is what?

On the manufacturer's website says only that when testing it has been dropped 12 times from a height of 120 cm.

There is off-hook by tap on the bracelet? for example useful when using headsets or blutuz can automatically lifting the handset speakerphone +, it would also be a very handy this feature.

zona09,
there's no such thing

Tasker action on the alarm, ie awakening

UPD: a standalone application and a profile for audio playback

UPD 2: on new bracelets / firmware / Mi Fit is not working.
Similarly, work on the ancient versions colored bracelet and applications.

Introduction
It was previouslyofferedthe idea of ​​automated actions when identified bracelet awakening.
Alas, he did not communicate such information. You can only use the alarm signal (both types) as a similar event.
After all, we can assume that you are already awake.

This problem is more acute when using a smart alarm when the wake-up time is inaccurate.
For example, the vibration of the bracelet can be completed ringtone to wake up for sure.

How it works and important information
1. To cover different alarm time starts at 4:00 monitoryaschaya task because it makes no sense to keep the cycle of all time
> You can run it in the evening in its own way, for example, if you have activated flight mode
2. Cleared debug log file/sdcard/mili_log.txt
3. Includes Bluetooth if it is turned off - is important for the flight mode

Further actions are performed in a cycle, every minute
At these regular battery awakening affect very few
Over 9 hours of problems in flight mode, the phone does not sleeponly 10 minutesIt is 2% of the time and not a single cent battery.

4. The contents of the log is read to a variable% log
5. It is searched textonDeviceStatusChanged: 16or17(Intelligent and an alarm clock)
6. If the text is found, ie, local variable% wake1it contains - vibration and stop cycle
> This action must be replaced by his: play a sound, turn off the flight mode - all you have to do upon awakening in the morning
7. If the text is not found: to wait for 1 minute and then check the log

Installation
1. Download Profile:Mi_Band_Wake_Action.prf.xml(2.7 KB)
2. Copy it to/ sdcard / Tasker / profiles
3. Tasker>tap on tabProfiles>Import>Mi_Band_Wake_Action
4. Replace action 7 on the right, as well as the correct start time monitoring
> To trigger an alarm clock better use a separate profile

Yeshe useful:obtaining bracelet statistics for use in Tasker

Post has been editedintro555 - 24.04.16, 16:50

I Redmi Note 3G to MTK 6592. It should be the official (English-Chinese) MIUI v5 last stabilka on Androyd 4.3.
Application for Mi Band closes with the words that needed 4.4.
How to connect the bracelet to this phone? Maybe the topic was rising already?

P.S. Mi band normally with Mi3 MIUI v6 connected directly.

Sew on Android 4.4!

Official firmware 4.4 on the Xiaomi Redmi Note 3G is not.

Fugientes, if beta 4.4.2 for Redmi Note 3G does not suit you then can not connect, wait for the official release

Post has been editeddrugoisport_RAUL - 23.01.15, 14:22

The requirements for the phone in the header is written 4.3 and above.
When it became necessary to 4.4?

You are welcome. Advice on batteries - is it normal for the day 100-93 = 7% from the last version of notifikeyshnom. Per day 9,000 steps, vibration during operation alarms, 10 calls and a little more messages while driving.
PS yesterday morning I received and loaded up to 100
Pps bought by dx

Post has been editedNEMestniy - 23.01.15, 14:02

Fugientes,
At spouses Redmi 1S MIUI v5 jb4.3 prekrasto working with Mi band. Yes, the application writes on the first pairing, you need to upgrade to 4.4, but to work or does not affect. Is that unlock by Mi Band does not work.

I think normally. I was just as well for the first night. Now (I held exactly one week, got the bracelet on Friday) shows 80%
app from thedezmen3 without notifications, enough for me notifications about calls.

Post has been editedPoluprovodnik75 - 23.01.15, 14:08

NEMestniy,
So far, do not panic. See what will be on the following days. I on the contrary slow discharge. 100% was 10 days. Now 82% passed 23 days.

My first interest too quickly flew away, then starts to weaken slowly, 2-3% per day
Now 62% charged 14 days ago. App notifications, 20 pieces per day + daily alarm clock

Post has been editedStab29 - 23.01.15, 14:12

similarly
NEMestniy, all the rules, it should be

When it turned out that 4.3 to Redmi Note 3G does not exist and never will.
Select the firmware 4.4.2 on the basis of possibleherein the cap threads with at firmware from multirom bracelet works as a clock.

Post has been editeddrugoisport_RAUL - 23.01.15, 14:29

Thanks. I figured if Note 4.2, rather than 4.3 then everything is clear :)

Even hand wash it counts the steps, how it is not ice

Died 2 bracelet. The problem was in the penultimate update the firmware when the bracelet is not fully updated. Bracelets no signs of life - do not blink, do not charge, are not defined. One of these 4 days in the refrigerator (before freezing was approximately 50% charge). What to do?