Catalog of modules for Xposed framework | Catalog of ready-made modules
(top right of the page or bottom left), be sure to check if this module has not been published here before.ZeroTransferPatched RUS
version: 3.7.4, March 13, 2016
Developer: defim
Google Play: play.google.com / ...
Xda: Not
Repository: Not
Description: disables connection WLAN, when the screen is off. You can also set the delay time of the operation. When connection is re-awakening.
Link to the original post: Xposed framework modules (Post Artieza # 48252070)
Download:
Zero Transfer v3.7.4 [Patched by Daimonium] _RUS.apk(184.35 KB)
Post has been editedVadik в„ў - 05.05.16, 09:02
version: 3.7.4, March 13, 2016
Developer: defim
Google Play: play.google.com / ...
Xda: Not
Repository: Not
Description: disables connection WLAN, when the screen is off. You can also set the delay time of the operation. When connection is re-awakening.
Link to the original post: Xposed framework modules (Post Artieza # 48252070)
What's new
Translated into Russian
Download:
Zero Transfer v3.7.4 [Patched by Daimonium] _RUS.apk(184.35 KB)Post has been editedVadik в„ў - 05.05.16, 09:02
Reason for editing: Corrected translation errors
Android N-ify
version: 0.2.0 from 29.05 | 0.3.0 debug from 13.07 | build 843 by 19.07
Developers: MrWasdennnoch, paphonb, Maxr1998
Xda: http: //forum.xda-devel...-ify-features-t3345091
Repository: http: //repo.xposed.inf...sdennnoch.androidn_ify | Test versions (snapshots)
Technical requirements: Android 5.0 or higher firmware, close to pure android (AOSP). Do not try to put it on MIUI / TouchWiz / Flyme OS / Vibe UI and similar all-out custom bikes, still does not work + butlup can get!
Russian language: there is.
Job description, functionality: opensorsny module to add new features in Android 7.0 Nougat firmware to Android L / M. Currently available:
- A new kind of notification bar and quick settings
- A new type of a list of recent
- Annotate the system settings (output the most important information at each setting item)
- Fast switching (double tap in the recent to switch to the last application)
- Use the buttons to navigate through the recent list of recent
The test version is now available more options (see. Spoiler below), but they can be volatile and have different bugs.
Screenshots
Release:Android N-ify 0.2.0.apk (1.64 MB)
Latest test version:tk.wasdennnoch.androidn_ify_Build843.apk (2.82 MB)
Test assembly 0.3.0:AndroidNify_0.3.0_Debug.apk (2.84 MB)
tk.wasdennnoch.androidn_ify_Build840.apk(2.81 MB)
tk.wasdennnoch.androidn_ify_Build840.apk(2.81 MB)
tk.wasdennnoch.androidn_ify_Build833.apk(2.78 MB)
tk.wasdennnoch.androidn_ify_Build831.apk(2.78 MB)
tk.wasdennnoch.androidn_ify_Build827.apk(2.75 MB)
tk.wasdennnoch.androidn_ify_Build815.apk(2.75 MB)
tk.wasdennnoch.androidn_ify_Build814.apk(2.74 MB)
Android N-ify 0.1.2.apk(61.29 KB)
Android N-ify 0.1.0 beta.apk(35.79 KB)
!!! Do not place the assembly with Google Play ( 1 and 2 ), There is nothing new, it's just the old test assembly, unbeknownst to the developer laid out in the Market for pumping money. place official test builds Which are constantly updated module authors.
The whole story can be found in topic module on XDA.
!!! Do not place April Fool novelty Android O-ify It is also useless fake from the same "creatives".
tk.wasdennnoch.androidn_ify_Build841.apk(2.81 MB)
Post has been editedAnais10 - 21.07.17, 03:06
version: 0.2.0 from 29.05 | 0.3.0 debug from 13.07 | build 843 by 19.07
Developers: MrWasdennnoch, paphonb, Maxr1998
Xda: http: //forum.xda-devel...-ify-features-t3345091
Repository: http: //repo.xposed.inf...sdennnoch.androidn_ify | Test versions (snapshots)
Technical requirements: Android 5.0 or higher firmware, close to pure android (AOSP). Do not try to put it on MIUI / TouchWiz / Flyme OS / Vibe UI and similar all-out custom bikes, still does not work + butlup can get!
Russian language: there is.
Job description, functionality: opensorsny module to add new features in Android 7.0 Nougat firmware to Android L / M. Currently available:
- A new kind of notification bar and quick settings
- A new type of a list of recent
- Annotate the system settings (output the most important information at each setting item)
- Fast switching (double tap in the recent to switch to the last application)
- Use the buttons to navigate through the recent list of recent
The test version is now available more options (see. Spoiler below), but they can be volatile and have different bugs.
Planned / not planned
Planned features:
Updates & Improvements according to Nougat source
Quick reply [Progess: 99% (Available in snapshots {NOTE: The apps actually have tu use Quick Reply. Even though it's implemented does not mean everp magically uses it})]
New QS animation [Progess: 95% (Available in snapshots )]
QS Editor [Progess: 99% (Available in snapshots )]
QS Pages [Progess: 99% (Available in snapshots )]
Emergency info on lockscreen [Progess: 99% (Available in snapshots )]
App install source in app info [Progess: 99% (Available in snapshots )]
Navigation draver in Settings [Progess: 50% (making it compatible with LP and other ROMs)]
Night mode
New crash message design
New app installer design
N easter egg
IMPOSSIBLE features (so far):
Multi-window
DPI selector
Data saver
Tall recents. We can make them wider, but not taller.
Features I'm not going to implement:
New navigation bar (Use the moduleNougat Navigation Barinstead)
New Doze mode (my implementation would be basically the same as the ones from Greenify, ForceDoze, NapTime etc)
Updates & Improvements according to Nougat source
Quick reply [Progess: 99% (Available in snapshots {NOTE: The apps actually have tu use Quick Reply. Even though it's implemented does not mean everp magically uses it})]
New QS animation [Progess: 95% (Available in snapshots )]
QS Editor [Progess: 99% (Available in snapshots )]
QS Pages [Progess: 99% (Available in snapshots )]
Emergency info on lockscreen [Progess: 99% (Available in snapshots )]
App install source in app info [Progess: 99% (Available in snapshots )]
Navigation draver in Settings [Progess: 50% (making it compatible with LP and other ROMs)]
Night mode
New crash message design
New app installer design
N easter egg
IMPOSSIBLE features (so far):
Multi-window
DPI selector
Data saver
Tall recents. We can make them wider, but not taller.
Features I'm not going to implement:
New navigation bar (Use the moduleNougat Navigation Barinstead)
New Doze mode (my implementation would be basically the same as the ones from Greenify, ForceDoze, NapTime etc)
Screenshots
What's new
Cheyndzhlog test versions
0.2.0:
- New notification design;
- New status bar header design;
- New Recents design;
- More double-tap fixes;
- Use recents button to return to last app / return to current app / navigate through recents;
- Option to restart SystemUI;
- App theme switch;
- About screen in app;
- Option to force english app language;
- Dutch, Farsi, French, Korean, Polish, Russian, Thai, Turkish, Ukrainian and Vietnamese translation.
Release notes:http: //forum.xda-devel...7078840&postcount=4059
0.1.2:
Fixed double-tap recents - again.
Fixed settings tile fix.
Removed print tile summary (was huge performance issue).
Romanian translation.
0.1.1 beta:
App icon.
Settings UI.
Options to disable tweaks.
Debug log option.
Double-tapping recents should now be working.
Fix for combined "Sounds & notifications" tile.
Moved strings to proper strings.xml files.
Italian, Slovak, German, Chinese, Portugese, Spanish translations.
0.2.0:
- New notification design;
- New status bar header design;
- New Recents design;
- More double-tap fixes;
- Use recents button to return to last app / return to current app / navigate through recents;
- Option to restart SystemUI;
- App theme switch;
- About screen in app;
- Option to force english app language;
- Dutch, Farsi, French, Korean, Polish, Russian, Thai, Turkish, Ukrainian and Vietnamese translation.
Release notes:http: //forum.xda-devel...7078840&postcount=4059
0.1.2:
Fixed double-tap recents - again.
Fixed settings tile fix.
Removed print tile summary (was huge performance issue).
Romanian translation.
0.1.1 beta:
App icon.
Settings UI.
Options to disable tweaks.
Debug log option.
Double-tapping recents should now be working.
Fix for combined "Sounds & notifications" tile.
Moved strings to proper strings.xml files.
Italian, Slovak, German, Chinese, Portugese, Spanish translations.
Known bugs release (v0.2.0)
SystemUI crash on OOS3 when opening recents. Disable the new "no recents" image to fix it.
On some ROMs the "clear all" button does not work.
Depending on the DPI the volume panel may have a spacing on the left side.
On some LG ROMs the header gets messed up. Disable the header tweaks.
The nightly builds are constantly encountered (and then quickly corrected) various new bugs.
On some ROMs the "clear all" button does not work.
Depending on the DPI the volume panel may have a spacing on the left side.
On some LG ROMs the header gets messed up. Disable the header tweaks.
The nightly builds are constantly encountered (and then quickly corrected) various new bugs.
Release:
Android N-ify 0.2.0.apk (1.64 MB) Latest test version:
tk.wasdennnoch.androidn_ify_Build843.apk (2.82 MB) Test assembly 0.3.0:
AndroidNify_0.3.0_Debug.apk (2.84 MB) Past versions
tk.wasdennnoch.androidn_ify_Build840.apk(2.81 MB)tk.wasdennnoch.androidn_ify_Build840.apk(2.81 MB)tk.wasdennnoch.androidn_ify_Build833.apk(2.78 MB)tk.wasdennnoch.androidn_ify_Build831.apk(2.78 MB)tk.wasdennnoch.androidn_ify_Build827.apk(2.75 MB)tk.wasdennnoch.androidn_ify_Build815.apk(2.75 MB)tk.wasdennnoch.androidn_ify_Build814.apk(2.74 MB)Android N-ify 0.1.2.apk(61.29 KB)Android N-ify 0.1.0 beta.apk(35.79 KB)!!! Do not place the assembly with Google Play ( 1 and 2 ), There is nothing new, it's just the old test assembly, unbeknownst to the developer laid out in the Market for pumping money. place official test builds Which are constantly updated module authors.
A bit of history
Comment Developer N-ify
I have nothing to do with the play store listing, it is not mine, I do not get any money. I do not know who develops it or if it will ever have significant updates.
someone ova here called Dvderfun uploaded Nify into play Store.
Please do not buy it. This is just a money grab of the uploader, and not our listing. We already reported it to Google, and I believe @MrWasdennnoch contacted the XDA portal to raise aweareness.
Of course, Apache license does not forbid what he does, but in an ethical view, it's more than unpleasant, especially since he did not contribute anything to the app and also tries to impersonate us. Should've at least changed the name of the app and visibly stated it's not ours.
Of course, Apache license does not forbid what he does, but in an ethical view, it's more than unpleasant, especially since he did not contribute anything to the app and also tries to impersonate us. Should've at least changed the name of the app and visibly stated it's not ours.
we sayed so many times DO NOT INSTALL THE PRO VERSION OR ANY VERSION OF NIFY ON THE PLAY STORE
The whole story can be found in topic module on XDA.
!!! Do not place April Fool novelty Android O-ify It is also useless fake from the same "creatives".
It's just a copy of Android N-ify. It appears to be exactly the same except for one changed icon and string. Please do not buy it and ignore that developer.
Attached files
tk.wasdennnoch.androidn_ify_Build841.apk(2.81 MB)Post has been editedAnais10 - 21.07.17, 03:06
Reason for editing: update
Status Bar Cleanup [LP-MM]
version: 1.0.5 from 17.04
Developer: Seveilith
Xda: http: //forum.xda-devel...s-bar-cleanup-t3347020
Repository: http: //repo.xposed.inf...ilith.statusbarcleanup
Technical requirements: Android 5.0 or higher firmware, close to AOSP. Not friendly with OS Oxygen.
Job description, functionality: new module to hide the system icons of the status bar. It is currently working with the following icons:
- Flight mode
- alarm clock
- battery
- Bluetooth
- clock
- Input Method
- network signal
- "no sim-card"
- Vibration mode
- Wi-Fi
- the operator (on lokskrine)
- data transfer
- the distribution of the Internet
- Geolocation Service
- route-request Rights (#)
- User Profile icon (on lokskrine)
- VPN
How to use: activate the module, mark the desired icon, and then restart the device.
Download:Status Bar Cleanup [LP-MM] 1.0.5.apk (1.62 MB)
Status Bar Cleanup [LP-MM] 1.0.apk(1.63 MB)
Status Bar Cleanup [LP-MM] 0.9.5.1.apk(1.38 MB)
Status Bar Cleanup [LP-MM] 0.9.0.apk(1.39 MB)
Post has been editedAnais10 - 19.04.16, 14:17
version: 1.0.5 from 17.04
Developer: Seveilith
Xda: http: //forum.xda-devel...s-bar-cleanup-t3347020
Repository: http: //repo.xposed.inf...ilith.statusbarcleanup
Technical requirements: Android 5.0 or higher firmware, close to AOSP. Not friendly with OS Oxygen.
Job description, functionality: new module to hide the system icons of the status bar. It is currently working with the following icons:
- Flight mode
- alarm clock
- battery
- Bluetooth
- clock
- Input Method
- network signal
- "no sim-card"
- Vibration mode
- Wi-Fi
- the operator (on lokskrine)
- data transfer
- the distribution of the Internet
- Geolocation Service
- route-request Rights (#)
- User Profile icon (on lokskrine)
- VPN
How to use: activate the module, mark the desired icon, and then restart the device.
Screenshot
 |
What's new
1.0.5:
Added
- Hide Root Privileges (# symbol) option.
- Hide Location Services Icon option.
Changeded
- Rewrote some of the icon descriptions.
Fixed
- Now suppresses errors such as "NoSuchMethod" and "NoSuchFieldError" for all classes in the xposed log. Note: If I do not have access to the source code for the requested ROM (e.g. Samsung's TouchWiz, OnePlus' Oxygen OS) I sadly can not do anything about the module not working in those cases.
1.0:
Added:
- Hide carrier label option (lock screen).
- Hide battery icon option (will add a separate option for lock screen later on).
- Hide hotspot option.
- New module icon.
- Welcome pop-up with instructions.
- Dark Mode.
- Settings screen that allows the user to enable / disable dark mode and the welcome pop-up.
- Choice to restart the module in the options menu in order to apply the settings.
- Changelog screen: the changelog is now available within the module itself.
Changed:
- Removed the icon confirmation toasts because it was annoying (replaced with the welcome dialog).
- Tweaked the marginEnd on the icon description text.
- The green color scheme now matches Google's material design standard.
- Xposed Framework API is now Gradle-based.
- Updated the Xposed Framework API from version 53 to 81.
Fixed:
- The "Hide VPN" option now works as intended.
0.9.5.1:
Changed the margin of the lock screen status bar container (for the user icon option).
0.9.5:
Added:
- Support to hide VPN icon.
- Support to hide the user icon in the status bar.
Changed:
- Tweaked the color theme in the status bar.
- Tweaked the color saturation of the app icon to better suit darker backgrounds.
- Removed an unused permission.
- Removed the disclaimer in the xposed description.
- Removed unsupported hide / unhide options until resource replacement works as intended (Xposed).
Fixed:
- Renamed the option "Signal Cluster Icon" to "Cellular Data Icon" to clarify.
- NoSuchMethod error that occurred on multiple classes. No more excessive xposed-logs!
Added
- Hide Root Privileges (# symbol) option.
- Hide Location Services Icon option.
Changeded
- Rewrote some of the icon descriptions.
Fixed
- Now suppresses errors such as "NoSuchMethod" and "NoSuchFieldError" for all classes in the xposed log. Note: If I do not have access to the source code for the requested ROM (e.g. Samsung's TouchWiz, OnePlus' Oxygen OS) I sadly can not do anything about the module not working in those cases.
1.0:
Added:
- Hide carrier label option (lock screen).
- Hide battery icon option (will add a separate option for lock screen later on).
- Hide hotspot option.
- New module icon.
- Welcome pop-up with instructions.
- Dark Mode.
- Settings screen that allows the user to enable / disable dark mode and the welcome pop-up.
- Choice to restart the module in the options menu in order to apply the settings.
- Changelog screen: the changelog is now available within the module itself.
Changed:
- Removed the icon confirmation toasts because it was annoying (replaced with the welcome dialog).
- Tweaked the marginEnd on the icon description text.
- The green color scheme now matches Google's material design standard.
- Xposed Framework API is now Gradle-based.
- Updated the Xposed Framework API from version 53 to 81.
Fixed:
- The "Hide VPN" option now works as intended.
0.9.5.1:
Changed the margin of the lock screen status bar container (for the user icon option).
0.9.5:
Added:
- Support to hide VPN icon.
- Support to hide the user icon in the status bar.
Changed:
- Tweaked the color theme in the status bar.
- Tweaked the color saturation of the app icon to better suit darker backgrounds.
- Removed an unused permission.
- Removed the disclaimer in the xposed description.
- Removed unsupported hide / unhide options until resource replacement works as intended (Xposed).
Fixed:
- Renamed the option "Signal Cluster Icon" to "Cellular Data Icon" to clarify.
- NoSuchMethod error that occurred on multiple classes. No more excessive xposed-logs!
Download:
Status Bar Cleanup [LP-MM] 1.0.5.apk (1.62 MB) Past versions
Status Bar Cleanup [LP-MM] 1.0.apk(1.63 MB)Status Bar Cleanup [LP-MM] 0.9.5.1.apk(1.38 MB)Status Bar Cleanup [LP-MM] 0.9.0.apk(1.39 MB)Post has been editedAnais10 - 19.04.16, 14:17
Reason for editing: update
Status Bar Cleanup [LP-MM] RUS
version: 0.9.0 from 28.03
Developer: Seveilith
Xda: http: //forum.xda-devel...s-bar-cleanup-t3347020
Repository: http: //repo.xposed.inf...ilith.statusbarcleanup
Technical requirements: Android 5.0 or higher firmware, close to AOSP
Job description, functionality: new module to hide the system icons of the status bar. It is currently working with the following icons:
- Flight mode
- Alarm clock
- Bluetooth
- Clock
- Input Method
- Network Signal
- "No SIM-card"
- Vibration mode
- Wi-Fi
In the future we plan to add a hidden battery (most icons and interest), and other icons on users' requests.
How to use: activate the module, mark the desired icon, and then restart the device.
Link to the original post: Xposed framework modules (Post Anais10 # 48389592)
Download:Status Bar Cleanup [LP-MM] 0.9.0_RUS.apk(1.3 MB)
Post has been editedCyberbob - 30.03.16, 08:42
version: 0.9.0 from 28.03
Developer: Seveilith
Xda: http: //forum.xda-devel...s-bar-cleanup-t3347020
Repository: http: //repo.xposed.inf...ilith.statusbarcleanup
Technical requirements: Android 5.0 or higher firmware, close to AOSP
Job description, functionality: new module to hide the system icons of the status bar. It is currently working with the following icons:
- Flight mode
- Alarm clock
- Bluetooth
- Clock
- Input Method
- Network Signal
- "No SIM-card"
- Vibration mode
- Wi-Fi
In the future we plan to add a hidden battery (most icons and interest), and other icons on users' requests.
How to use: activate the module, mark the desired icon, and then restart the device.
Link to the original post: Xposed framework modules (Post Anais10 # 48389592)
What's new
Translated into Russian
Download:
Status Bar Cleanup [LP-MM] 0.9.0_RUS.apk(1.3 MB)Post has been editedCyberbob - 30.03.16, 08:42
Reason for editing: in catalog
Protect My Privacy (PMP)
version: 2.5.2 from 29.07
Developer: synergylabscmu
Google Play: https: //play.google.co...synergylabs.androidpmp
Of site: http://www.android.protectmyprivacy.org
Repository: http: //repo.xposed.inf...synergylabs.pmpandroid
Technical requirements: Android 4.3 and up
Job description, functionality: a module for dynamic (on-demand real-time) control the permissions of applications, an alternative to application-harvester LBE Security Master and abandoned module Donkey Guard. Only, unlike competitors, there is no notification appears on top of the open application, and curtain.
How to work with the module:install, activate to Xposed, reboot the device, re-open the module, and if you see a list of applications, then, PMP works, you can begin to set rules for access to permits.
Download:org.synergylabs.pmpandroid_v30_e099c1.apk (7.55 MB)
PMP_2.5.0.apk(7.63 MB)
PMP-2.4.2.apk(6.79 MB)
PMP 2.4.1.apk(6.68 MB)
Protect My Privacy 2.4.1.apk(6.69 MB)
Protect My Privacy 2.4.0.apk(6.41 MB)
Protect My Privacy 2.3.2.apk(4.81 MB)
Protect My Privacy 2.3.1.apk(4.72 MB)
Protect My Privacy 2.3.0.apk(4.72 MB)
Protect My Privacy 2.2.2.apk(4.72 MB)
Protect My Privacy (PMP) 2.2.1.apk(4.66 MB)
Protect My Privacy 2.2.0.1.apk(4.38 MB)
Protect My Privacy 2.1.5.apk(3.53 MB)
Protect My Privacy 2.1.3.apk(3.49 MB)
Protect My Privacy (PMP) 2.1.2.apk(5.63 MB)
Protect My Privacy 2.1.0.apk(5.63 MB)
Post has been editedAnais10 - 31.07.17, 02:47
version: 2.5.2 from 29.07
Developer: synergylabscmu
Google Play: https: //play.google.co...synergylabs.androidpmp
Of site: http://www.android.protectmyprivacy.org
Repository: http: //repo.xposed.inf...synergylabs.pmpandroid
Technical requirements: Android 4.3 and up
Job description, functionality: a module for dynamic (on-demand real-time) control the permissions of applications, an alternative to application-harvester LBE Security Master and abandoned module Donkey Guard. Only, unlike competitors, there is no notification appears on top of the open application, and curtain.
Module features
в€љ Real-time notifies you when an application requests access to sensitive private data (location, phone ID, contacts, messages, notifications, etc...) Or to the network;
в€љ Allows you to control access to the network separately (mobile Internet / WiFi);
в€љ Action selection (allow / deny / deceive / always ask);
в€љ Allows you to undo all the changes made at once, by default it allows important internal permissions (such as reading and writing to the card), allows you to set a fake location;
в€љ Control of both user and system applications (with the prohibition of system permissions, be careful, a preliminary backup is always welcome);
√ Access control from the module itself or notification in the curtain; “toast” with a notification message awaiting your decision;
в€љ Grouping applications (protected, system), paging lists with a swipe;
в€љ Icons next to the names of applications that clearly show what types of permissions these applications require;
в€љ Works both on stocks and on custom types like CM.
в€љ Allows you to control access to the network separately (mobile Internet / WiFi);
в€љ Action selection (allow / deny / deceive / always ask);
в€љ Allows you to undo all the changes made at once, by default it allows important internal permissions (such as reading and writing to the card), allows you to set a fake location;
в€љ Control of both user and system applications (with the prohibition of system permissions, be careful, a preliminary backup is always welcome);
√ Access control from the module itself or notification in the curtain; “toast” with a notification message awaiting your decision;
в€љ Grouping applications (protected, system), paging lists with a swipe;
в€љ Icons next to the names of applications that clearly show what types of permissions these applications require;
в€љ Works both on stocks and on custom types like CM.
Screenshots
 |
 |
 |
 |
Old interface
 |
 |
What's new
2.5.2:
Adding support for more third party libraries.
2.5.0:
All new LIBRARY based blocking which is state of the art in protecting your privacy!
Reduce the number of decisions.
Major bugfixes.
2.4.2:
Making Firewall feature optional;
Bugfixes.
2.4.1:
Bugfix where the app was crashing on older devices.
2.4.0:
Added a Firewall feature, which blocks Wifi and mobile data on a per app basis;
Bug fix where the Fake location was not being updated in some cases;
Minor Bug fixes.
2.3.2:
Decisions are saved on 3rd party app updates;
Better detection of root.
2.3.1:
Bugfix where the notification was not being displayed completely;
Improved the stability,
2.3.0:
Owing to popular demand, removed the permanent notification.
Bugfix where PMP wasn't restarting on device reboot.
2.2.2:
Bug fixes. This is the most stable version of PMP we've made.
2.2.1:
Fixed compatibility issues preventing the app from opening properly on pre-lollipop devices.
Fixed a bug which causes notifications to sometimes not respond to user input.
Created a new initial setup process to help users discover new features of PMP.
Added messages when permissions are set from defaults so you know when apps are accessing permissions.
2.2.0.1:
Fixed a bug which would cause the app to close on phones with manufacturer-defined permissions.
2.2.0:
Material design based UI.
Now you can set default behavior for permissions to see less notifications.
2.1.5:
Added the consent page and the ability to turn off contributions.
Defined Manufacturer specific permissions.
Made the app more asynchronous.
Improved the battery usage of the app.
Fixed Google play services crashing on older Android devices.
Fixed multiple toast messages being displayed.
2.1.3:
Fixed multi dex crash issue in Android 4.x.
Sort apps by name.
Optimized code.
Minor bug fixes.
Fixed Choosing Location via Maps.
Bug fixes.
Adding support for more third party libraries.
2.5.0:
All new LIBRARY based blocking which is state of the art in protecting your privacy!
Reduce the number of decisions.
Major bugfixes.
2.4.2:
Making Firewall feature optional;
Bugfixes.
2.4.1:
Bugfix where the app was crashing on older devices.
2.4.0:
Added a Firewall feature, which blocks Wifi and mobile data on a per app basis;
Bug fix where the Fake location was not being updated in some cases;
Minor Bug fixes.
2.3.2:
Decisions are saved on 3rd party app updates;
Better detection of root.
2.3.1:
Bugfix where the notification was not being displayed completely;
Improved the stability,
2.3.0:
Owing to popular demand, removed the permanent notification.
Bugfix where PMP wasn't restarting on device reboot.
2.2.2:
Bug fixes. This is the most stable version of PMP we've made.
2.2.1:
Fixed compatibility issues preventing the app from opening properly on pre-lollipop devices.
Fixed a bug which causes notifications to sometimes not respond to user input.
Created a new initial setup process to help users discover new features of PMP.
Added messages when permissions are set from defaults so you know when apps are accessing permissions.
2.2.0.1:
Fixed a bug which would cause the app to close on phones with manufacturer-defined permissions.
2.2.0:
Material design based UI.
Now you can set default behavior for permissions to see less notifications.
2.1.5:
Added the consent page and the ability to turn off contributions.
Defined Manufacturer specific permissions.
Made the app more asynchronous.
Improved the battery usage of the app.
Fixed Google play services crashing on older Android devices.
Fixed multiple toast messages being displayed.
2.1.3:
Fixed multi dex crash issue in Android 4.x.
Sort apps by name.
Optimized code.
Minor bug fixes.
Fixed Choosing Location via Maps.
Bug fixes.
Download:
org.synergylabs.pmpandroid_v30_e099c1.apk (7.55 MB) Past versions
PMP_2.5.0.apk(7.63 MB)PMP-2.4.2.apk(6.79 MB)PMP 2.4.1.apk(6.68 MB)Protect My Privacy 2.4.1.apk(6.69 MB)Protect My Privacy 2.4.0.apk(6.41 MB)Protect My Privacy 2.3.2.apk(4.81 MB)Protect My Privacy 2.3.1.apk(4.72 MB)Protect My Privacy 2.3.0.apk(4.72 MB)Protect My Privacy 2.2.2.apk(4.72 MB)Protect My Privacy (PMP) 2.2.1.apk(4.66 MB)Protect My Privacy 2.2.0.1.apk(4.38 MB)Protect My Privacy 2.1.5.apk(3.53 MB)Protect My Privacy 2.1.3.apk(3.49 MB)Protect My Privacy (PMP) 2.1.2.apk(5.63 MB)Protect My Privacy 2.1.0.apk(5.63 MB)Post has been editedAnais10 - 31.07.17, 02:47
Overscroll Action
version: 0.1.3 from 5.04
Developer: tkgktyk
GitHub: https://github.com/tkgktyk/Pudding
Repository: http: //repo.xposed.inf...tkgktyk.xposed.pudding
Technical requirements: Android 4.0.3 and higher
Job description, functionality: module that allows to scroll in all directions and set on each action, launch another application or shortcut. How it works: Let's say the client offline scrolling down - page update. And with this module you can to scroll in any direction and still set on every action - for example, scroll to the right - to close an application, scroll to the left - to open the shutter with notifications, etc. The feature on the fan, but you never know...
Download:Overscroll Action 0.1.3.apk (2.26 MB)
Post has been editedCyberbob - 07.04.16, 09:02
version: 0.1.3 from 5.04
Developer: tkgktyk
GitHub: https://github.com/tkgktyk/Pudding
Repository: http: //repo.xposed.inf...tkgktyk.xposed.pudding
Technical requirements: Android 4.0.3 and higher
Job description, functionality: module that allows to scroll in all directions and set on each action, launch another application or shortcut. How it works: Let's say the client offline scrolling down - page update. And with this module you can to scroll in any direction and still set on every action - for example, scroll to the right - to close an application, scroll to the left - to open the shutter with notifications, etc. The feature on the fan, but you never know...
Screenshots
 |
 |
 |
 |
 |
Download:
Overscroll Action 0.1.3.apk (2.26 MB) Post has been editedCyberbob - 07.04.16, 09:02
Reason for editing: in catalog
Full translationOverscroll Action 0.1.3 Rus
Description: removed all languages ​​except English and Russian
Overscroll_Action_0.1.3 (Rus_by_Kinkara) .apk(2.19 MB)
Post has been editedAnais10 - 12.09.16, 02:04
Description: removed all languages ​​except English and Russian
Overscroll_Action_0.1.3 (Rus_by_Kinkara) .apk(2.19 MB)Post has been editedAnais10 - 12.09.16, 02:04
Reason for editing: in catalog
SkyOlin Helper (Multi Window)
version: 2.5 from 8.05
Developer: refgd
Xda: http: //forum.xda-devel...kyolin-helper-t3330872
Repository: http: //repo.xposed.inf...ule/com.skyolin.helper
Technical requirements: Android 4.0.3 - 6.0.x; nandroid desirable pre-backup, t. To. The unit sometimes leads to butlupam.
Job description, functionality: new module based on MW (partly) known XHaloFloatingWindow .
Download:SkyOlin Helper 2.5.apk (198.69 KB)
Post has been editedAnais10 - 08.05.16, 18:29
version: 2.5 from 8.05
Developer: refgd
Xda: http: //forum.xda-devel...kyolin-helper-t3330872
Repository: http: //repo.xposed.inf...ule/com.skyolin.helper
Technical requirements: Android 4.0.3 - 6.0.x; nandroid desirable pre-backup, t. To. The unit sometimes leads to butlupam.
Job description, functionality: new module based on MW (partly) known XHaloFloatingWindow .
- Floating windows and multi-window mode for any applications (including forced one - i.e. opening in a window at any application launch);
- Fine tuning of the floating window for each application (width, height, position on the screen, DPI, ability to move and resize the window, prohibiting unloading of the application from memory, adjusting the window title color to the application color (automatically or manually), window title size and others its parts);
- Moving a window in drag & drop mode, resizing it with a gesture at the right corner of the window, long tap to hide the title bar, "live" update the contents of the window when it is resized;
- The ability to set for any application in the DPI window (screen density), other than the system one;
- Floating button to launch a bar with applications, customize its appearance;
- Forced screen orientation as per user choice.
Screenshots
 |
 |
What's new
2.5:
* Remember transparency when reopen.
* Add Russian language (Thanks @Ms_Julia).
* Fix some bug with floating button.
2.4:
* Fix some app force close.
* Add force automatic rotation.
* Add option - hide titlebar to right corner.
* Fix normal window can not show keyboard.
* Remember transparency when reopen.
* Add Russian language (Thanks @Ms_Julia).
* Fix some bug with floating button.
2.4:
* Fix some app force close.
* Add force automatic rotation.
* Add option - hide titlebar to right corner.
* Fix normal window can not show keyboard.
Download:
SkyOlin Helper 2.5.apk (198.69 KB) Past versions
Post has been editedAnais10 - 08.05.16, 18:29
Reason for editing: update
MIUI Lockscreen Dialer
version: v1.0 (14.04.2016)
Developer: xxxTy3uKxxx
XDA: http://forum.xda-developers.com/xposed/modules/mod-miui-lockscreen-dialer-t3358311
Repository: http: //repo.xposed.inf....miuinotificationsound
Technical requirements: work is checked on MIUIv7 Global Stable 7.2.2.0 (5.0.2).
Job description, functionality: Adds lokskrin launch dialer swipe right. You can set your application to run.
Download:tk.ty3uk.miuilockscreendialer_v1_1a39dd.apk (82.61 KB)
Post has been editedCyberbob - 15.04.16, 12:48
version: v1.0 (14.04.2016)
Developer: xxxTy3uKxxx
XDA: http://forum.xda-developers.com/xposed/modules/mod-miui-lockscreen-dialer-t3358311
Repository: http: //repo.xposed.inf....miuinotificationsound
Technical requirements: work is checked on MIUIv7 Global Stable 7.2.2.0 (5.0.2).
Job description, functionality: Adds lokskrin launch dialer swipe right. You can set your application to run.
Screenshots
 |
 |
What's new
- v1.0 (14.04.2016) - The first release. Many thanks kisasanya for the patch
Download:
tk.ty3uk.miuilockscreendialer_v1_1a39dd.apk (82.61 KB) Past versions
Post has been editedCyberbob - 15.04.16, 12:48
Reason for editing: in catalog
PerfectColorBar RUS
version: 1.4.8 from 04.06
Developer: flarejune
Xda: https: //forum.xda-deve...rfectcolorbar-t3287755
Repository: //savagemessiahzine.com/ Pages / g ... ectcolorbar & e = 45976655 / 4.2-4.4
Technical requirements : Android 5-6.x.x
Link to the original post: Xposed framework modules
Job description, functionality: New advanced micro-module for coloring the status bar and navbara color running application. Available separate selection of background staining and / or icon bars, staining the list of recent applications, similar to the module Tinted Recent Panels, change style "toast" (the system pop-up notifications) and staining in the color of the status bar, setup Lollipop gradient, several compatibility modes for better detection of color, the ability to choose a painting only the status bar or just navbara, blacklist applications and other features. According to reviews, it is stable and the best analogues.
Download for Android 5+:com.flarejune.perfectcolorbar_v156_11be3b.apk (140.12 KB)
Download for Android 4,2+:PerfectColorBar + v1.4.3 + for + Android + 4.2 + .apk (111.31 KB)
Post has been editedopt_step - 18.02.18, 08:40
version: 1.4.8 from 04.06
Developer: flarejune
Xda: https: //forum.xda-deve...rfectcolorbar-t3287755
Repository: //savagemessiahzine.com/ Pages / g ... ectcolorbar & e = 45976655 / 4.2-4.4
Technical requirements : Android 5-6.x.x
Link to the original post: Xposed framework modules
Job description, functionality: New advanced micro-module for coloring the status bar and navbara color running application. Available separate selection of background staining and / or icon bars, staining the list of recent applications, similar to the module Tinted Recent Panels, change style "toast" (the system pop-up notifications) and staining in the color of the status bar, setup Lollipop gradient, several compatibility modes for better detection of color, the ability to choose a painting only the status bar or just navbara, blacklist applications and other features. According to reviews, it is stable and the best analogues.
Download for Android 5+:
com.flarejune.perfectcolorbar_v156_11be3b.apk (140.12 KB) Download for Android 4,2+:
PerfectColorBar + v1.4.3 + for + Android + 4.2 + .apk (111.31 KB) Past versions
Post has been editedopt_step - 18.02.18, 08:40
Reason for editing: 1.5.6
SkyOlin Helper (Multi Window) RUS
version: 2.4 by 21.04 (Translation from 22/04/2016)
Developer: refgd
Transfer: Tysontl2007 (I)
Xda: http: //forum.xda-devel...kyolin-helper-t3330872
Repository: http: //repo.xposed.inf...ule/com.skyolin.helper
Link to the original post: Xposed framework modules (Post Anais10 # 48858750)
Technical requirements: Android 4.0.3 - 6.0.x; nandroid desirable pre-backup, t. To. The unit sometimes leads to butlupam. ; Translated into Russian.
Job description, functionality: MW new module based on (partly) known XHaloFloatingWindow.
Floating windows and multi-window mode for any applications (including forced one - i.e. opening in a window at any application launch);
Fine tuning of the floating window for each application (width, height, position on the screen, DPI, ability to move and resize the window, prohibiting unloading of the application from memory, adjusting the window title color to the application color (automatically or manually), window title size and others its parts);
Moving a window in drag & drop mode, resizing it with a gesture at the right corner of the window, long tap to hide the title bar, "live" update the contents of the window when it is resized;
The ability to set for any application in the DPI window (screen density), other than the system one;
Floating button to launch a bar with applications, customize its appearance;
Forced screen orientation as per user choice.
Download:SkyOlin + Helper + v2.4_RUS_Tysontl2007.apk (209.92 KB)
Translated for himself, not much kick
Post has been editedTysontl2007 - 22.04.16, 19:14
version: 2.4 by 21.04 (Translation from 22/04/2016)
Developer: refgd
Transfer: Tysontl2007 (I)
Xda: http: //forum.xda-devel...kyolin-helper-t3330872
Repository: http: //repo.xposed.inf...ule/com.skyolin.helper
Link to the original post: Xposed framework modules (Post Anais10 # 48858750)
Technical requirements: Android 4.0.3 - 6.0.x; nandroid desirable pre-backup, t. To. The unit sometimes leads to butlupam. ; Translated into Russian.
Job description, functionality: MW new module based on (partly) known XHaloFloatingWindow.
Floating windows and multi-window mode for any applications (including forced one - i.e. opening in a window at any application launch);
Fine tuning of the floating window for each application (width, height, position on the screen, DPI, ability to move and resize the window, prohibiting unloading of the application from memory, adjusting the window title color to the application color (automatically or manually), window title size and others its parts);
Moving a window in drag & drop mode, resizing it with a gesture at the right corner of the window, long tap to hide the title bar, "live" update the contents of the window when it is resized;
The ability to set for any application in the DPI window (screen density), other than the system one;
Floating button to launch a bar with applications, customize its appearance;
Forced screen orientation as per user choice.
Screenshots
 |
 |
 |
 |
What's new
Translating to Russian language
Download:
SkyOlin + Helper + v2.4_RUS_Tysontl2007.apk (209.92 KB) Past versions
Translated for himself, not much kick
Post has been editedTysontl2007 - 22.04.16, 19:14
Reason for editing: in catalog
Serajr Xperia в„ў Home X (MM)
version: v1.0.0 of 17 April 2016
Developer: Serajr (XDA)
Xda: http: //forum.xda-devel...e-x-mm-v1-0-0-t3360895
Technical requirements: Xperia devices c Android 6.0.1 and a home screen (Xperia Home) version 28 or later ...
Job description, functionality: Customize Desktop Xperia
Download:v1.0.0_Serajr_Xperia_Home_X_MM_6.0.1.apk (1.67 MB)
Download: Version with Russian translation by Breathe of fatev1.0.0_Serajr_Xperia_Home_X_MM_6.0.1.RUS-signed [1] .apk (1.69 MB)
Post has been editedZotmen - 20.04.16, 16:43
version: v1.0.0 of 17 April 2016
Developer: Serajr (XDA)
Xda: http: //forum.xda-devel...e-x-mm-v1-0-0-t3360895
Technical requirements: Xperia devices c Android 6.0.1 and a home screen (Xperia Home) version 28 or later ...
Job description, functionality: Customize Desktop Xperia
Screenshots
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
What's new
First edition
Download:
v1.0.0_Serajr_Xperia_Home_X_MM_6.0.1.apk (1.67 MB) Download: Version with Russian translation by Breathe of fate
v1.0.0_Serajr_Xperia_Home_X_MM_6.0.1.RUS-signed [1] .apk (1.69 MB) Post has been editedZotmen - 20.04.16, 16:43
Reason for editing: in catalog
Protect My Privacy (PMP) RUS
version: 2.2.2 from 2.11, translating from 06.11
Developer: synergylabscmu
Transfer: Tysontl2007 (I)
Of site: http://www.android.protectmyprivacy.org/
Repository: http: //repo.xposed.inf...synergylabs.pmpandroid
Link to the original post: Xposed framework modules (Anais10 # 48622506 Post)
Technical requirements: Android 4.3 and up
Job description, functionality: a module for dynamic (on-demand real-time) control the permissions of applications, an alternative to application-harvester LBE Security Master and abandoned module Donkey Guard. Only, unlike competitors, there is no notification appears on top of the open application, and curtain. After today's update finally earned, so I spread, maybe someone will come in handy. Russian version
Job description, functionality:
в€љ In real time, notifies you when an application requests access to important private data (location, phone ID, contacts, messages, notifications, etc.);
в€љ Action selection (allow / deny / deceive / always ask);
в€љ Allows you to undo all the changes made at once, by default it allows important internal permissions (such as reading and writing to the card), allows you to set a fake location;
в€љ Control of both user and system applications (with the prohibition of system permissions, be careful, a preliminary backup is always welcome);
√ Access control from the module itself or notification in the curtain; “toast” with a notification message awaiting your decision;
в€љ Grouping applications (protected, system), paging lists with a swipe;
в€љ Icons next to the names of applications that clearly show what types of permissions these applications require;
в€љ Works both on stocks and on custom types like CM.
Download:Protect + My + Privacy + 2.2.2_Tysontl2007_v2.apk (4.48 MB)
Post has been editedTysontl2007 - 06.11.16, 12:48
version: 2.2.2 from 2.11, translating from 06.11
Developer: synergylabscmu
Transfer: Tysontl2007 (I)
Of site: http://www.android.protectmyprivacy.org/
Repository: http: //repo.xposed.inf...synergylabs.pmpandroid
Link to the original post: Xposed framework modules (Anais10 # 48622506 Post)
Technical requirements: Android 4.3 and up
Job description, functionality: a module for dynamic (on-demand real-time) control the permissions of applications, an alternative to application-harvester LBE Security Master and abandoned module Donkey Guard. Only, unlike competitors, there is no notification appears on top of the open application, and curtain. After today's update finally earned, so I spread, maybe someone will come in handy. Russian version
Job description, functionality:
в€љ In real time, notifies you when an application requests access to important private data (location, phone ID, contacts, messages, notifications, etc.);
в€љ Action selection (allow / deny / deceive / always ask);
в€љ Allows you to undo all the changes made at once, by default it allows important internal permissions (such as reading and writing to the card), allows you to set a fake location;
в€љ Control of both user and system applications (with the prohibition of system permissions, be careful, a preliminary backup is always welcome);
√ Access control from the module itself or notification in the curtain; “toast” with a notification message awaiting your decision;
в€љ Grouping applications (protected, system), paging lists with a swipe;
в€љ Icons next to the names of applications that clearly show what types of permissions these applications require;
в€љ Works both on stocks and on custom types like CM.
Screenshots
 |
 |
 |
 |
 |
 |
Download:
Protect + My + Privacy + 2.2.2_Tysontl2007_v2.apk (4.48 MB) P.S. + Old translation Veria
- The names of the permissions are not translated, because they are either no longer work, or lost an icon in front of authorization
- Translated for themselves, not much kick
- Offers in the QMS
- Older versions of the translation:
Protect + My + Privacy + 2.1.3_RUS_2.2_Tysontl2007.apk(3.26 MB)
Protect + My + Privacy + 2.1.3_RUS_2.1_Tysontl2007.apk(3.26 MB)
Protect + My + Privacy + 2.1.3_RUS_2.0_Tysontl2007.apk(3.27 MB)
Protect + My + Privacy + 2.1.3_RUS_Tysontl2007.apk(3.27 MB)
Protect + My + Privacy + 2.1.5_RUS_Tysontl2007.apk(3.3 MB)
Protect + My + Privacy + 2.2.2_Tysontl2007.apk(4.48 MB)
- Translated for themselves, not much kick
- Offers in the QMS
- Older versions of the translation:
Protect + My + Privacy + 2.1.3_RUS_2.2_Tysontl2007.apk(3.26 MB)Protect + My + Privacy + 2.1.3_RUS_2.1_Tysontl2007.apk(3.26 MB)Protect + My + Privacy + 2.1.3_RUS_2.0_Tysontl2007.apk(3.27 MB)Protect + My + Privacy + 2.1.3_RUS_Tysontl2007.apk(3.27 MB)Protect + My + Privacy + 2.1.5_RUS_Tysontl2007.apk(3.3 MB)Protect + My + Privacy + 2.2.2_Tysontl2007.apk(4.48 MB)Post has been editedTysontl2007 - 06.11.16, 12:48
Reason for editing: in / Translation v2
extMIUIv7
version: 1.1.3 from 26.04
Developer: xxxTy3uKxxx
module threadsavagemessiahzine.com: В®extMIUIv7 [Xposed] There you can freely communicate with the developer for bug fixes and adding new features.
Google Play: https: //play.google.co... id = tk.ty3uk.extmiuiv7?
Xda: http: //forum.xda-devel...mod-extmiuiv7-t3364121
Technical requirements: MIUI 7 based on Android 4.4.x-6.x.x
Job description, functionality: a new module for MIUI 7 from our forumchanin, SW. xxxTy3uKxxx . Unites tviki previously unreleased individual modules ( MIUI Extended Reboot , MIUI Brightness Fix et al.), and supplemented by other. At this point in the kit:
Download:extMIUIv7 v1.1.3.apk (752.36 KB)
extMIUIv7.apk(746.6 KB)
Post has been editedAnais10 - 27.04.16, 03:33
version: 1.1.3 from 26.04
Developer: xxxTy3uKxxx
module threadsavagemessiahzine.com: В®extMIUIv7 [Xposed] There you can freely communicate with the developer for bug fixes and adding new features.
Google Play: https: //play.google.co... id = tk.ty3uk.extmiuiv7?
Xda: http: //forum.xda-devel...mod-extmiuiv7-t3364121
Technical requirements: MIUI 7 based on Android 4.4.x-6.x.x
Job description, functionality: a new module for MIUI 7 from our forumchanin, SW. xxxTy3uKxxx . Unites tviki previously unreleased individual modules ( MIUI Extended Reboot , MIUI Brightness Fix et al.), and supplemented by other. At this point in the kit:
- Disconnect the ringer volume and uvedomeny. Add a separate volume control and call notifications. Notification volume slider is added to the audio settings.
- Add extended restart menu (Normal, rekaveri, loader).
- Multiline names in contacts. Disable circumcision contacts with long names and display them on multiple lines.
- Add support for Russian language in T9 search for contacts in the dialer. After switching on / off the need to update the index in the T9 settings Contacts application.
- Add a shortcut to launch the dialer to your lock screen (swipe right). You can manually specify the application and the screen to start.
- Fix Auto Brightness steps (make them more fluid), and the minimum brightness level on some devices. You can manually set the gradation levels of brightness and backlight.
- Enable Russian alphabet in the sidebar Contacts application.
- Enable / disable a transparent background blur notification bar.
- Correction of the music player in the notification bar - now it opens the current game player, not just MIUI Music.
Screenshots
 |
 |
 |
 |
 |
 |
What's new
1.1.3:
Fixed incorrect behavior of the control panel to tweak music notifications to third-party themes.
1.1.2:
Fixed crash when selecting the dialer application, or a music player on some devices.
Fixed incorrect behavior of the control panel to tweak music notifications to third-party themes.
1.1.2:
Fixed crash when selecting the dialer application, or a music player on some devices.
Download:
extMIUIv7 v1.1.3.apk (752.36 KB) Past versions
extMIUIv7.apk(746.6 KB)Post has been editedAnais10 - 27.04.16, 03:33
Reason for editing: update
Settings Editor Pro (FULL RUS)
version: 1.5 from 6.05
Developer: wilco375
Xda: http: //forum.xda-devel...sily-add-edit-t3365756
Repository: http: //repo.xposed.inf...ilco375.settingseditor
Google Play: Settings Editor | Settings Editor Pro
Technical requirements: Android 4.0.3+, EEPROM, close to AOSP (SM supported), organized with standard settings.
Job description, functionality: the long-awaited module for modifying system settings. It allows you to:
- add setting their applications from the list established by creating a separate category (group), or by placing in the existing for them;
- add, move, delete groups;
- rename the group and added paragraphs themselves, change their icons (select the icons of installed applications or just choose a picture from the gallery).
If the unit did not work, try to make it systemic.
Download (full translation):Settings Editor v1.5 Pro - FULL RUS.apk (1.55 MB)
Post has been editedAnais10 - 29.07.17, 06:02
version: 1.5 from 6.05
Developer: wilco375
Xda: http: //forum.xda-devel...sily-add-edit-t3365756
Repository: http: //repo.xposed.inf...ilco375.settingseditor
Google Play: Settings Editor | Settings Editor Pro
Technical requirements: Android 4.0.3+, EEPROM, close to AOSP (SM supported), organized with standard settings.
Job description, functionality: the long-awaited module for modifying system settings. It allows you to:
- add setting their applications from the list established by creating a separate category (group), or by placing in the existing for them;
- add, move, delete groups;
- rename the group and added paragraphs themselves, change their icons (select the icons of installed applications or just choose a picture from the gallery).
If the unit did not work, try to make it systemic.
Screenshots
 |
 |
 |
Download (full translation):
Settings Editor v1.5 Pro - FULL RUS.apk (1.55 MB) Past versions
Post has been editedAnais10 - 29.07.17, 06:02
Settings Editor Pro
version: 2.13.3 , 20.09.18
Developer: wilco375
Google Play: play.google ..
Xda: forum.xda ..
Link to the original post: Xposed framework modules (Post Anais10 # 49142626)
Technical requirements: Android 4.0+, but it is tested on Android 5.0 and above; EEPROM close to AOSP (SM supported), organized with standard settings. (From the author: The app is tested on stock (themed) Android 5.0 and 6.0 and should work on CM as well ).
Job description, functionality: Post above.
Added option to change the description of the tiles
Added debug option
2.7
Translations updated
Bugfixes
Changed saving method to JSON for future compatibility
Added Android Nougat shortcuts (can be used with Action Launcher 3)
2.6
NOTE: This update is not compatible with previous versions due to combining the Free and Pro version into one project and thus changes made in older versions will not be kept.
German tranlation added (thanks to Torsten Schneider)
Updated other translations
Added backup / restore option
Added option to change text color
Added option to hide the status text
2.4
Added intro screen, implemented Android M permission system (Thanks to Daniel THIRION)
2.0
Major material design overhaul
Bugfixes
Languages ​​updated
Added more settings
Download (Patched):Settings Editor Pro_v2.13.3.apk (4.54 MB)
Settings Editor Pro v2.13.2.apk(4.25 MB)
Settings Editor Pro-v2.13.1_build_46P.apk(4.29 MB)
Settings Editor Pro v2.12.0P.apk(3.55 MB)
BetaSettings Editor Pro v2.13.0-beta.apk(4.18 MB)
Settings Editor Pro v2.11.2.apk(3.71 MB)
Settings Editor Pro v2.11.1P.apk(3.72 MB)
Settings Editor Pro-2.11.0.apk(3.66 MB)
Settings Editor Pro-2.11.0.apk(3.66 MB)
Settings Editor Pro-2.10.6.apk(3.65 MB)
Settings Editor Pro_v2.10.5 (37) .apk(3.65 MB)
Settings Editor Pro-2.10.4P.apk(3.7 MB)
Settings Editor Pro v2.10.3 build 33.apk(3.69 MB)
Settings Editor Pro-2.10.2.apk(3.6 MB)
Settings Editor Pro-2.10.1.apk(3.6 MB)
Settings Editor Pro v2.10.0.apk(3.6 MB)
Settings Editor Pro v2.9.3.apk(3.56 MB)
Settings Editor Pro-2.9.2.apk(3.55 MB)
Settings Editor Pro-2.9.1.apk(3.56 MB)
Settings Editor Pro-2.9.apk(3.56 MB)
Settings Editor Pro-2.8.apk(3.56 MB)
Settings Editor Pro-2.7.apk(3.56 MB)
Settings Editor Pro v2.6.apk(2.92 MB)
Settings Editor Pro v2.4.apk(3.21 MB)
Settings Editor Pro v2.2.apk(2.84 MB)
Settings Editor Pro.ver.2.1.build.18.apk(2.84 MB)
Settings Editor Pro v2.0.apk(2.84 MB)
Settings Editor Pro v1.9.build.16.apk(1.9 MB)
Settings Editor Pro-1.8a.apk(1.9 MB)
Settings Editor Pro-1.8b13.apk(1.9 MB)
Settings Editor Pro.ver.1.6.build.11.apk(1.88 MB)
Settings Editor Pro-1.5b.apk(1.55 MB)
Settings Editor Pro-1.5a.apk(1.55 MB)
Settings Editor Pro-1.5.apk(1.55 MB)
Settings Editor Pro-1.4.apk(1.53 MB)
Settings Editor Pro-1.3.apk(1.52 MB)
Settings Editor Pro-1.2.apk(1.52 MB)
Settings Editor Pro-1.1.apk(1.18 MB)
Settings Editor Pro v1.0.apk(1.16 MB)
Post has been editedAlex0047 - 20.09.18, 22:25
version: 2.13.3 , 20.09.18
Developer: wilco375
Google Play: play.google ..
Xda: forum.xda ..
Link to the original post: Xposed framework modules (Post Anais10 # 49142626)
Technical requirements: Android 4.0+, but it is tested on Android 5.0 and above; EEPROM close to AOSP (SM supported), organized with standard settings. (From the author: The app is tested on stock (themed) Android 5.0 and 6.0 and should work on CM as well ).
Job description, functionality: Post above.
What's new
Added option to change the description of the tiles
Added debug option
2.7
Translations updated
Bugfixes
Changed saving method to JSON for future compatibility
Added Android Nougat shortcuts (can be used with Action Launcher 3)
2.6
NOTE: This update is not compatible with previous versions due to combining the Free and Pro version into one project and thus changes made in older versions will not be kept.
German tranlation added (thanks to Torsten Schneider)
Updated other translations
Added backup / restore option
Added option to change text color
Added option to hide the status text
2.4
Added intro screen, implemented Android M permission system (Thanks to Daniel THIRION)
2.0
Major material design overhaul
Bugfixes
Languages ​​updated
Added more settings
Download (Patched):
Settings Editor Pro_v2.13.3.apk (4.54 MB) Past versions
Settings Editor Pro v2.13.2.apk(4.25 MB)Settings Editor Pro-v2.13.1_build_46P.apk(4.29 MB)Settings Editor Pro v2.12.0P.apk(3.55 MB)Beta
Settings Editor Pro v2.13.0-beta.apk(4.18 MB)Settings Editor Pro v2.11.2.apk(3.71 MB)Settings Editor Pro v2.11.1P.apk(3.72 MB)Settings Editor Pro-2.11.0.apk(3.66 MB)Settings Editor Pro-2.11.0.apk(3.66 MB)Settings Editor Pro-2.10.6.apk(3.65 MB)Settings Editor Pro_v2.10.5 (37) .apk(3.65 MB)Settings Editor Pro-2.10.4P.apk(3.7 MB)Settings Editor Pro v2.10.3 build 33.apk(3.69 MB)Settings Editor Pro-2.10.2.apk(3.6 MB)Settings Editor Pro-2.10.1.apk(3.6 MB)Settings Editor Pro v2.10.0.apk(3.6 MB)Settings Editor Pro v2.9.3.apk(3.56 MB)Settings Editor Pro-2.9.2.apk(3.55 MB)Settings Editor Pro-2.9.1.apk(3.56 MB)Settings Editor Pro-2.9.apk(3.56 MB)Settings Editor Pro-2.8.apk(3.56 MB)Settings Editor Pro-2.7.apk(3.56 MB)Settings Editor Pro v2.6.apk(2.92 MB)Settings Editor Pro v2.4.apk(3.21 MB)Settings Editor Pro v2.2.apk(2.84 MB)Settings Editor Pro.ver.2.1.build.18.apk(2.84 MB)Settings Editor Pro v2.0.apk(2.84 MB)Settings Editor Pro v1.9.build.16.apk(1.9 MB)Settings Editor Pro-1.8a.apk(1.9 MB)Settings Editor Pro-1.8b13.apk(1.9 MB)Settings Editor Pro.ver.1.6.build.11.apk(1.88 MB)Settings Editor Pro-1.5b.apk(1.55 MB)Settings Editor Pro-1.5a.apk(1.55 MB)Settings Editor Pro-1.5.apk(1.55 MB)Settings Editor Pro-1.4.apk(1.53 MB)Settings Editor Pro-1.3.apk(1.52 MB)Settings Editor Pro-1.2.apk(1.52 MB)Settings Editor Pro-1.1.apk(1.18 MB)Settings Editor Pro v1.0.apk(1.16 MB)Post has been editedAlex0047 - 20.09.18, 22:25
XTextList RUS
version: 2.0.1, 11.25.2015 (Translation from 05/24/2016)
Developer: darkk6
Transfer: Tysontl2007 (I)
Repository: http: //repo.xposed.inf...arkk6.xposed.xtextlist
Link to the original post: Xposed framework modules (Post sever20067 # 45517969)
Technical requirements: 4.0.3 ~ 6.0; translated into Russian
Job description, functionality: It allows you to insert text in the text box on the predefined templates or from the buffer. Called the module automatically when the keyboard appears.
Download:XTextList_2.0.1_RUS_v2_Tysontl2007.apk (366.73 KB)
Translated for himself, not much kick. Proposals for the expansion / improvement of the translation into my QMS
Post has been editedTysontl2007 - 24.05.16, 22:24
version: 2.0.1, 11.25.2015 (Translation from 05/24/2016)
Developer: darkk6
Transfer: Tysontl2007 (I)
Repository: http: //repo.xposed.inf...arkk6.xposed.xtextlist
Link to the original post: Xposed framework modules (Post sever20067 # 45517969)
Technical requirements: 4.0.3 ~ 6.0; translated into Russian
Job description, functionality: It allows you to insert text in the text box on the predefined templates or from the buffer. Called the module automatically when the keyboard appears.
Screenshots
 |
 |
 |
What's new
2.0.1
- translated into Russian
- Code integrate
- Stop support TLP Mode for newer features. *one
- Add option to show "close float window" button on text list dialog. * 2
- Fix FC bug when add or copy string with single quote. (SQL issue)
- Remove clipboard listener service, use more "Xposed" way to listen it. (Hook setPrimaryClip method; p) * 3
* 1: You can still use it, but newer features will no implement.
* 2: Because some apps will make float window stuck on screen.
* 3: You do not need reboot after switch history feature since this version.
- translated into Russian
- Code integrate
- Stop support TLP Mode for newer features. *one
- Add option to show "close float window" button on text list dialog. * 2
- Fix FC bug when add or copy string with single quote. (SQL issue)
- Remove clipboard listener service, use more "Xposed" way to listen it. (Hook setPrimaryClip method; p) * 3
* 1: You can still use it, but newer features will no implement.
* 2: Because some apps will make float window stuck on screen.
* 3: You do not need reboot after switch history feature since this version.
Download:
XTextList_2.0.1_RUS_v2_Tysontl2007.apk (366.73 KB) Past translations
Translated for himself, not much kick. Proposals for the expansion / improvement of the translation into my QMS
Post has been editedTysontl2007 - 24.05.16, 22:24
Reason for editing: in / Updated Translation
Fakelocation
version: 1.2.681.1701 from 13.02
Developer: j2rong
Repository: http: //repo.xposed.inf...ng.xposed.fakelocation
GitHub: https://github.com/j2rong/FakeLocation
Technical requirements: Android 4.3 and up
Job description, functionality: a new module for the inclusion of fictitious locations per app (application-specific). It does not require the inclusion of fictitious locations in the system settings.
Download:FakeLocation-1.2.681.1701.apk (2.2 MB)
FakeLocation-1.2.670.1670.apk(2.2 MB)
FakeLocation v0.7.300.564.apk(2.78 MB)
FakeLocation 0.5.161.252.apk(1.05 MB)
FakeLocation 0.4.127.169.apk(1.02 MB)
FakeLocation 0.3.78.89.apk(929.62 KB)
Post has been editedAnais10 - 14.02.17, 00:53
version: 1.2.681.1701 from 13.02
Developer: j2rong
Repository: http: //repo.xposed.inf...ng.xposed.fakelocation
GitHub: https://github.com/j2rong/FakeLocation
Technical requirements: Android 4.3 and up
Job description, functionality: a new module for the inclusion of fictitious locations per app (application-specific). It does not require the inclusion of fictitious locations in the system settings.
Screenshots
 |
 |
 |
What's new
1.2.681.1701
- Add Traditional Chinese translation
1.2.670.1670
- Prepare Android 7 support (partial)
- Add "Notify" button back in `Per-app Settings` page
- Try to fix some issues regarding to GPS mocking
- Other improvements
1.1.646.1599
- Add map search
- Improve 'Current Cell Info'
- Links in help now use browser to open
- Map's initial location default to app's current settings
- UI adjustments
- Bug fixes
1.0.561.1263
- Add `Template` -` Current Cell Info`
- Improve Gps status handling
- Add a "Notify" button (overlay and per-app settings), try it when you use GPS Mocking alone and get "Locating", "Unable to locate", etc.
- Improve that overlay may be killed by the system when low on memory
- Bug fixes
- Improve usability
0.9.486.1041
Hide module from selected app (s)
Sort apps list by mocking status and settings
New approach for GMS support (Make the gps settings in App's per-app settings page, no longer need to set com.google.android.gms separately)
Fix location jumping back to real location
Fix a problem with Material Xposed Installer
Update help
Settings for update interval
Bug fixes
0.8.404.813
Now you do not even need to turn on GPS to update new mocking location
Optimize donation
Add joystick floating window, mocking location will be updated according to the bearing and strength. To use it, go to the app setting page and click "Connect" first.
Add preferred map setting
Fix a bug that the module keeps saying that it's not active even it was enabled in Xposed Installer on some devices
Fix a crash cause by clicking search when the list is still loading
Other bug fixes
PLEASE NOTE that this update uses a new setting file and new format, some old settings will be lost after the update.
0.7.300.564:
Custom GPS status support;
Select GPS coordinates from map (play service 7.0.0+ is required);
Map select history (recent list);
Bug fixes;
When "Instant Update" enabled, location settings made by map click, marker click, recent list selection will be saved immediately without going back to app list.
0.6.195.401:
Support Android 4.3;
Enhance cell location mocking;
Improve the handling logic of several functions;
Add support for the Location API of Google Play services;
Add support for the Tencent Location SDK.
0.5.161.252:
Add template settings.
Offset correction (coordinates in China).
Enhance cell location mocking.
Fix a bug that may cause FC.
Fix a bug that new settings will not take effect.
New permission WRITE_EXTERNAL_STORAGE is used for saving crash logs.
0.4.127.169:
Add app search.
Add setting shortcut (recent list).
Bug fixes.
Performance optimizations.
- Add Traditional Chinese translation
1.2.670.1670
- Prepare Android 7 support (partial)
- Add "Notify" button back in `Per-app Settings` page
- Try to fix some issues regarding to GPS mocking
- Other improvements
1.1.646.1599
- Add map search
- Improve 'Current Cell Info'
- Links in help now use browser to open
- Map's initial location default to app's current settings
- UI adjustments
- Bug fixes
1.0.561.1263
- Add `Template` -` Current Cell Info`
- Improve Gps status handling
- Add a "Notify" button (overlay and per-app settings), try it when you use GPS Mocking alone and get "Locating", "Unable to locate", etc.
- Improve that overlay may be killed by the system when low on memory
- Bug fixes
- Improve usability
0.9.486.1041
Hide module from selected app (s)
Sort apps list by mocking status and settings
New approach for GMS support (Make the gps settings in App's per-app settings page, no longer need to set com.google.android.gms separately)
Fix location jumping back to real location
Fix a problem with Material Xposed Installer
Update help
Settings for update interval
Bug fixes
0.8.404.813
Now you do not even need to turn on GPS to update new mocking location
Optimize donation
Add joystick floating window, mocking location will be updated according to the bearing and strength. To use it, go to the app setting page and click "Connect" first.
Add preferred map setting
Fix a bug that the module keeps saying that it's not active even it was enabled in Xposed Installer on some devices
Fix a crash cause by clicking search when the list is still loading
Other bug fixes
PLEASE NOTE that this update uses a new setting file and new format, some old settings will be lost after the update.
0.7.300.564:
Custom GPS status support;
Select GPS coordinates from map (play service 7.0.0+ is required);
Map select history (recent list);
Bug fixes;
When "Instant Update" enabled, location settings made by map click, marker click, recent list selection will be saved immediately without going back to app list.
0.6.195.401:
Support Android 4.3;
Enhance cell location mocking;
Improve the handling logic of several functions;
Add support for the Location API of Google Play services;
Add support for the Tencent Location SDK.
0.5.161.252:
Add template settings.
Offset correction (coordinates in China).
Enhance cell location mocking.
Fix a bug that may cause FC.
Fix a bug that new settings will not take effect.
New permission WRITE_EXTERNAL_STORAGE is used for saving crash logs.
0.4.127.169:
Add app search.
Add setting shortcut (recent list).
Bug fixes.
Performance optimizations.
Download:
FakeLocation-1.2.681.1701.apk (2.2 MB) Past versions
FakeLocation-1.2.670.1670.apk(2.2 MB)FakeLocation v0.7.300.564.apk(2.78 MB)FakeLocation 0.5.161.252.apk(1.05 MB)FakeLocation 0.4.127.169.apk(1.02 MB)FakeLocation 0.3.78.89.apk(929.62 KB)Post has been editedAnais10 - 14.02.17, 00:53
Reason for editing: update
InstallerOpt
version: 1.0.10 build 53 from 24.01
Developer: 123SIT
Xda: http: //forum.xda-devel...talleropt-0-4-t3377008
Repository: http: //repo.xposed.inf.../net.fypm.installeropt
Technical requirements: Android 4.0.3-6.0.x. Preferred pre-nandroid backup, t. To. The module is sometimes butlupy.
Job description, functionality: A new module for the system package installer, was originally conceived as an alternative to XInstaller for Android 6, on which XInstaller often does not work correctly. The following options are currently available:
- Display the application version when you install (in the System Installer window and / or pop-up notification)
- Auto-installer page after a successful installation / removal of applications
- Automatic installation / auto-delete applications without confirmation
- opening the application on Google Play with a long tap on its icon in the system "Application Information"
- preservation apk and data applications at its removal
- compulsory installation of applications on the memory card
- disable signature verification, authorizations, version SDK; permission to downgrade app
- permit full access to the memory card
- Lucky Patcher hide from other applications
... and much more - the functionality is constantly expanding.
With the version 1.0.9 module officially added Russian. localization.
How does the show version:
Download:net.fypm.InstallerOpt_v2151_dba0e9.apk (854.72 KB)
Russification without typos:InstallerOpt v1.0.10 build 53 - FULL RUS by Anais10.apk (874.84 KB)
InstallerOpt v1.0.10 build 3.apk(850.69 KB)
Full Russification:InstallerOpt v1.0.10 build 3 - FULL RUS by Anais10.apk (872.28 KB)
InstallerOpt v1.0.7 build 61 - RUS by Anais10.apk(774.65 KB)
InstallerOpt v1.0.7 - RUS by Anais10.apk(771.48 KB)
InstallerOpt v1.0.6 build 84 - RUS by Anais10.apk(747.24 KB)
InstallerOpt v1.0.6 - RUS by Anais10.apk(745.48 KB)
InstallerOpt v1.0.5 build 88 - RUS by Anais10.apk(709.26 KB)
InstallerOpt v1.0.5 build 84 - RUS by Anais10.apk(709.11 KB)
InstallerOpt v1.0.5 build 81 - RUS by Anais10.apk(706.37 KB)
InstallerOpt v1.0.5 build 49 - RUS by Anais10.apk(1.26 MB)
InstallerOpt v1.0.5 build 49.apk(1.25 MB)
InstallerOpt v1.0.5 - RUS by Anais10.apk(596.75 KB)
InstallerOpt v1.0.5.apk(588.17 KB)
InstallerOpt v1.0.4 exp - RUS by Anais10.apk(1.14 MB)
InstallerOpt 1.0.4 exp.apk(1.14 MB)
InstallerOpt 1.0.3.apk(548.85 KB)
InstallerOpt 1.0.apk(614.75 KB)
InstallerOpt 0.9.apk(1.18 MB)
Post has been editedAnais10 - 25.01.17, 04:29
version: 1.0.10 build 53 from 24.01
Developer: 123SIT
Xda: http: //forum.xda-devel...talleropt-0-4-t3377008
Repository: http: //repo.xposed.inf.../net.fypm.installeropt
Technical requirements: Android 4.0.3-6.0.x. Preferred pre-nandroid backup, t. To. The module is sometimes butlupy.
Job description, functionality: A new module for the system package installer, was originally conceived as an alternative to XInstaller for Android 6, on which XInstaller often does not work correctly. The following options are currently available:
- Display the application version when you install (in the System Installer window and / or pop-up notification)
- Auto-installer page after a successful installation / removal of applications
- Automatic installation / auto-delete applications without confirmation
- opening the application on Google Play with a long tap on its icon in the system "Application Information"
- preservation apk and data applications at its removal
- compulsory installation of applications on the memory card
- disable signature verification, authorizations, version SDK; permission to downgrade app
- permit full access to the memory card
- Lucky Patcher hide from other applications
... and much more - the functionality is constantly expanding.
With the version 1.0.9 module officially added Russian. localization.
Screenshots Rus. versions
 |
 |
How does the show version:
 |
What's new
1.0.10 build 53:
Fixed issue that may cause notification to not show;
Force English in module will also use English for version info when installing.
1.0.10 build 44:
Optimized retrieving preferences from content provider
Fixed display issue with toast if you were not showing both version and version code
Reworked restore backup process logic to be more seamless
Reworked the way the master switch was implemented as it may not have been respected
Translations updates
1.0.10 build 3:
Fixed newline character in Polish translation.
1.0.10 build 2:
Fix crashes due to not handling screen rotation correctly;
Master switch to disable all features without having to reboot;
Add notification for app install;
Show current app being parsed when loading backups and applications;
Add dialog when installing an unknown app, credit to Matsca09 / DirectApkInstall, now you do not have to enable Unknown Sources in settings;
Restoring backups will override same version / version code install cancellation and unknown sources will be enabled for duration of restore process;
Added filtering in backup / application lists to speed up looking for specific files;
Fixed sorting by date in backup manager;
Removed tons of hard coded strings;
Language translation updates;
Backup / restore / reset InstallerOpt preferences.
1.0.9 beta:
Fix issues with LG roms;
Misc code cleanup.
1.0.8 beta:
Lots of changes so this list may not be exhaustive;
Backup manager with stats on each backup;
Share backups;
Backup any installed application;
Code refactoring and cleanup.
1.0.7 build 61:
Fixed issue affected Lollipop and below devices from loading the module;
Better ROM detection to control which hooks are applied to certain roms;
Misc fixes and code cleanup.
1.0.7 build 46 (beta):
This was tested on TW MM and CM MM 9/12 nightly with no issues so far.
Fixed missing apps issue with previous build, sorry guys;
Added disable JAR verification;
Added disable signature verification;
Added disable duplicate permission check;
Added disable permission checks - WIP;
Added disable SDK checks - WIP;
Misc fixes.
1.0.7 experimental:
If you are on a CM based ROM I would be careful with this build. If you choose to flash it and upon booting you have missing apps, boot into recovery, navigate to /data/data/de.robv.android.xposed.installer/conf/ and delete enabled_modules.list and modules.list. When you reboot all your xposed modules will be disabled but your apps will be back. Then just uncheck InstallerOpt and reboot to enable your previous module selections.
Disable signature checking and application verification finally working as intended.
Fixed issue with permissions not showing on CM based roms, thanks pyler and Maxr1998.
Chinese translation by aviraxp, thank you.
Code cleanup and refactoring.
1.0.6 build 84:
15 API support added back.
Force English option.
Show version info inline made optional just like toast display.
More error handling.
Backup sanity checks added for chosen folder.
1.0.6:
Fixed incorrect method call relating to bootReceiver.
Tweaked Hide FC method to automatically close dialog and FC crashing app, still a WIP but better than before.
1.0.5 build 422:
Backup folder can be chosen now.
If backup folder is changed, user is offered to move old backups.
Saving to external SD cards is now possible (thanks pylerSM).
More debugging added.
Alignment fixes for version info display.
Misc code cleanup.
1.0.5 build 88:
Downgrade apps.
1.0.5 build 84:
Added option to enable / disable vibrate on auto install complete.
1.0.5 build 81 beta:
Version display on installer dialog should be resolved.
Vibrate when install completed if using auto install and auto close install.
Misc bugs squashed.
1.0.5 build 49 beta:
Fixed links in about dialog.
Slovak language update.
Stats menu option to see size of APK backup folder size and delete it if desired.
Minor bug fixes.
1.0.5 build 36 beta:
Fixed NPE.
1.0.5 beta:
Version info can be shown on install dialog now, toast is still an option in case you use auto install.
Backup apks to storage during install.
Delete apks after install from original location such as Download folder.
Permission request for external storage when you open the preferences on MM.
Bug fixes.
Signature check and app verification are able to be used but may not work.
1.0.4 experimental:
Hide app crash dialog;
Enable system app disabling;
Enable uninstall system apps, long click disable button - test if you can but do not break your phone;
Enable user app state change (enabled / disabled or some may see turn on / turn off), long click to uninstall ... the disable button that was previously present in earlier androids is gone so I had to get creative;
Enable uninstall apps with device admin;
Package name display in app info, click the app name to toggle;
Auto install launch the app when install finishes, opposite of auto install close ... only one of these can be enabled at a time but the module takes care of that;
Enable debug for all apps - test if you know how;
Show buttons, this should resolve the issue of not being able to click install when the toast is showing.
1.0.3:
Lots of changes in preference code so all preferences have been reset to avoid conflicts, so after rebooting reenable your preferred settings:
Enabled show version code;
Added package name toggle in app info by clicking the app label;
Completely recoded preferences to eliminate issues now and in the future.
1.0.2:
Added Open in Playstore which opens application in Playstore when you long click the icon in app details.
Enabled dark theme.
Versioning changes.
Reduced file size a little more.
1.0:
Added launcher icon hiding.
Added auto uninstall.
Reduced APK and storage usage by over 50%.
Fixed issue that may cause notification to not show;
Force English in module will also use English for version info when installing.
1.0.10 build 44:
Optimized retrieving preferences from content provider
Fixed display issue with toast if you were not showing both version and version code
Reworked restore backup process logic to be more seamless
Reworked the way the master switch was implemented as it may not have been respected
Translations updates
1.0.10 build 3:
Fixed newline character in Polish translation.
1.0.10 build 2:
Fix crashes due to not handling screen rotation correctly;
Master switch to disable all features without having to reboot;
Add notification for app install;
Show current app being parsed when loading backups and applications;
Add dialog when installing an unknown app, credit to Matsca09 / DirectApkInstall, now you do not have to enable Unknown Sources in settings;
Restoring backups will override same version / version code install cancellation and unknown sources will be enabled for duration of restore process;
Added filtering in backup / application lists to speed up looking for specific files;
Fixed sorting by date in backup manager;
Removed tons of hard coded strings;
Language translation updates;
Backup / restore / reset InstallerOpt preferences.
1.0.9 beta:
Fix issues with LG roms;
Misc code cleanup.
1.0.8 beta:
Lots of changes so this list may not be exhaustive;
Backup manager with stats on each backup;
Share backups;
Backup any installed application;
Code refactoring and cleanup.
1.0.7 build 61:
Fixed issue affected Lollipop and below devices from loading the module;
Better ROM detection to control which hooks are applied to certain roms;
Misc fixes and code cleanup.
1.0.7 build 46 (beta):
This was tested on TW MM and CM MM 9/12 nightly with no issues so far.
Fixed missing apps issue with previous build, sorry guys;
Added disable JAR verification;
Added disable signature verification;
Added disable duplicate permission check;
Added disable permission checks - WIP;
Added disable SDK checks - WIP;
Misc fixes.
1.0.7 experimental:
If you are on a CM based ROM I would be careful with this build. If you choose to flash it and upon booting you have missing apps, boot into recovery, navigate to /data/data/de.robv.android.xposed.installer/conf/ and delete enabled_modules.list and modules.list. When you reboot all your xposed modules will be disabled but your apps will be back. Then just uncheck InstallerOpt and reboot to enable your previous module selections.
Disable signature checking and application verification finally working as intended.
Fixed issue with permissions not showing on CM based roms, thanks pyler and Maxr1998.
Chinese translation by aviraxp, thank you.
Code cleanup and refactoring.
1.0.6 build 84:
15 API support added back.
Force English option.
Show version info inline made optional just like toast display.
More error handling.
Backup sanity checks added for chosen folder.
1.0.6:
Fixed incorrect method call relating to bootReceiver.
Tweaked Hide FC method to automatically close dialog and FC crashing app, still a WIP but better than before.
1.0.5 build 422:
Backup folder can be chosen now.
If backup folder is changed, user is offered to move old backups.
Saving to external SD cards is now possible (thanks pylerSM).
More debugging added.
Alignment fixes for version info display.
Misc code cleanup.
1.0.5 build 88:
Downgrade apps.
1.0.5 build 84:
Added option to enable / disable vibrate on auto install complete.
1.0.5 build 81 beta:
Version display on installer dialog should be resolved.
Vibrate when install completed if using auto install and auto close install.
Misc bugs squashed.
1.0.5 build 49 beta:
Fixed links in about dialog.
Slovak language update.
Stats menu option to see size of APK backup folder size and delete it if desired.
Minor bug fixes.
1.0.5 build 36 beta:
Fixed NPE.
1.0.5 beta:
Version info can be shown on install dialog now, toast is still an option in case you use auto install.
Backup apks to storage during install.
Delete apks after install from original location such as Download folder.
Permission request for external storage when you open the preferences on MM.
Bug fixes.
Signature check and app verification are able to be used but may not work.
1.0.4 experimental:
Hide app crash dialog;
Enable system app disabling;
Enable uninstall system apps, long click disable button - test if you can but do not break your phone;
Enable user app state change (enabled / disabled or some may see turn on / turn off), long click to uninstall ... the disable button that was previously present in earlier androids is gone so I had to get creative;
Enable uninstall apps with device admin;
Package name display in app info, click the app name to toggle;
Auto install launch the app when install finishes, opposite of auto install close ... only one of these can be enabled at a time but the module takes care of that;
Enable debug for all apps - test if you know how;
Show buttons, this should resolve the issue of not being able to click install when the toast is showing.
1.0.3:
Lots of changes in preference code so all preferences have been reset to avoid conflicts, so after rebooting reenable your preferred settings:
Enabled show version code;
Added package name toggle in app info by clicking the app label;
Completely recoded preferences to eliminate issues now and in the future.
1.0.2:
Added Open in Playstore which opens application in Playstore when you long click the icon in app details.
Enabled dark theme.
Versioning changes.
Reduced file size a little more.
1.0:
Added launcher icon hiding.
Added auto uninstall.
Reduced APK and storage usage by over 50%.
Download:
net.fypm.InstallerOpt_v2151_dba0e9.apk (854.72 KB) Russification without typos:
InstallerOpt v1.0.10 build 53 - FULL RUS by Anais10.apk (874.84 KB) Past versions
InstallerOpt v1.0.10 build 3.apk(850.69 KB)Full Russification:
InstallerOpt v1.0.10 build 3 - FULL RUS by Anais10.apk (872.28 KB) InstallerOpt v1.0.7 build 61 - RUS by Anais10.apk(774.65 KB)InstallerOpt v1.0.7 - RUS by Anais10.apk(771.48 KB)InstallerOpt v1.0.6 build 84 - RUS by Anais10.apk(747.24 KB)InstallerOpt v1.0.6 - RUS by Anais10.apk(745.48 KB)InstallerOpt v1.0.5 build 88 - RUS by Anais10.apk(709.26 KB)InstallerOpt v1.0.5 build 84 - RUS by Anais10.apk(709.11 KB)InstallerOpt v1.0.5 build 81 - RUS by Anais10.apk(706.37 KB)InstallerOpt v1.0.5 build 49 - RUS by Anais10.apk(1.26 MB)InstallerOpt v1.0.5 build 49.apk(1.25 MB)InstallerOpt v1.0.5 - RUS by Anais10.apk(596.75 KB)InstallerOpt v1.0.5.apk(588.17 KB)InstallerOpt v1.0.4 exp - RUS by Anais10.apk(1.14 MB)InstallerOpt 1.0.4 exp.apk(1.14 MB)InstallerOpt 1.0.3.apk(548.85 KB)InstallerOpt 1.0.apk(614.75 KB)InstallerOpt 0.9.apk(1.18 MB)Post has been editedAnais10 - 25.01.17, 04:29
Reason for editing: + Rus. version
Android N-ify
version: 114hhh updates every day.
Developer: MrWasdennnoch
jenkins: download
Technical requirements: Android 5.0 and higher, AOSP-firmware, Russian
Job description, functionality: opensorsny module for adding new features in Android N EEPROM on Android L / M. An experimental version, the functionality will increase with time. Since the source code of Android N is not yet available, development is blind, so some features may not coincide with the actual features The Android N.
Available at the moment:
Settings
Double-tap to open the Recent Apps
curtain
notifications
Download:tk.wasdennnoch.androidn_ify_Build114.apk (820.42 KB)
Post has been editedpashapuma - 13.05.16, 21:26
version: 114hhh updates every day.
Developer: MrWasdennnoch
jenkins: download
Technical requirements: Android 5.0 and higher, AOSP-firmware, Russian
Job description, functionality: opensorsny module for adding new features in Android N EEPROM on Android L / M. An experimental version, the functionality will increase with time. Since the source code of Android N is not yet available, development is blind, so some features may not coincide with the actual features The Android N.
Available at the moment:
Settings
Double-tap to open the Recent Apps
curtain
notifications
Screenshots
 |
 |
 |
 |
 |
Download:
tk.wasdennnoch.androidn_ify_Build114.apk (820.42 KB) Post has been editedpashapuma - 13.05.16, 21:26
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement