HP iPAQ hx4700 series flashing FAQ | HP iPAQ hx4700 / hx4705, HTC Roadster



Rep: (288)
FAQ for flashing HP iPAQ hx4700 series
HP iPAQ hx4700 / 4705 / HTC Roadster
Discussion | FAQ | FAQ on flashing | FAQ on flashing WM5.0 Upgrade.

For part of the optimization of the system, thanksarei .

Post has been edited-del- - 19.12.12, 18:52



Rep: (288)
Questions and answers Optimization of WM5 \ WM6 systems

Post has been editedP43ym - 12.06.11, 14:15
Reason for editing: "official"



Rep: (288)
Where can I get the latest official firmware with a rollback to WM2003SE?

kozhura Date • Date • 10.28.07 14:43:15
Here -Download drivers and software .

The file was downloaded from the official website of HP United States..
Microsoft Windows Mobile 2003 Second Edition
HP iPAQ hx4700 Pocket PC Series ROM Update 1.10.08SP29841 May 9, 2005.
Attached filesp29841.exe(25.2 MB)


Attention!The second pinned file (hp_wm2003_4700_install) is taken fromamerican siteto worknot verified.
All actions with this file you do at your own peril and risk. In case of failure of the PDA. Claims are not accepted!
Zip description
hp_wm2003_4700_install
CeiPAQ.dll
DisconnectActiveSync.exe
EnterBL.exe
GetDeviceData.exe
hpRUU.exe
hpRUUENG.dll
hx4700_11008_ENG_RC_AKU26.nbf
iPAQPCSDK.dll
ReadMe.txt
RUUClientDriver.dll
unicows.dll
hp_wm2003_4700_sp31186
hx4700 MISC XIP_ENG.exe


HP iPAQ Pocket PC h4700 Series ROM Update Utility Release Notes.
HP iPAQ Pocket PC h4700 Series ROM Update Utility Release Notes.

May 6, 2005
___________________________________________________________________

Please read the following important information about updating the
ROM on the HP iPAQ Pocket PC.

This is a ROM update
in the ROM. Please monitor the support and drivers section of the
HP website for ROM or software updates for this product.
___________________________________________________________________

C O N T E N T S

1. System Requirements
2. Important information about HP ROM Update Utility v2.02.011
3. Known Issues and Workarounds
___________________________________________________________________


***************************
1. SYSTEM REQUIREMENTS
***************************

* A host PC running Microsoft Windows 98SE, Windows ME, Windows 2000,
or Windows XP.

* Microsoft ActiveSync v3.7.1 or later version installed on the
host PC. The latest version of Microsoft ActiveSync is available
for download on the Microsoft web site.

* An HP iPAQ Pocket PC

* A direct USB connection between the PC and the iPAQ
Pocket PC.


******************************************************************
2. IMPORTANT INFORMATION ABOUT HP ROM UPDATE UTILITY v2.02.011
******************************************************************

*** CAUTION ***
The ROM Update Utility is designed to erase and replace the
current ROM image and any existing ActiveSync partnerships
HP iPAQ Pocket PC
and in the iPAQ File Store. HP recommends that users perform a
Microsoft Activesync or iPAQ backup of their personal data
Backup before proceeding with the ROM update. This is only as a
after the ROM update.

(NOTE)
HP recommends that HP iPAQ Pocket PC ROM made from a
HP iPAQ Pocket PC handheld with the should
version number from ROM
was created. Installing old backups ROM version the backup
was not created
ROM causing it to become unstable.

Copy it from the HP iPAQ Pocket
PC (including from the iPAQ File Store) to the PC or a storage
card using ActiveSync Explore or iPAQ Backup.

* Users who do not customarily synchronize personal data using
Microsoft Outlook (‘stand-alone” users) should install Microsoft
Outlook on their host PC and synchronize their personal data. The
HP iPAQ Pocket PC after
the ROM update has been completed and a partnership between the host
PC and the HP iPAQ Pocket PC has been established.

* Remove any accessories from the iPAQ Pocket PC prior to updating
the ROM. These may interfere with the update process.

* After the Update, ActiveSync v3.7.1 or later versions will prompt to
establish a new partnership in order to synchronize the HP iPAQ
Pocket PC with the host PC. Previously established ActiveSync
partnerships will be unusable. Once a new partnership has been
established, programs and personal data may be re-loaded through
Add / Remove Programs from the Tools menu in ActiveSync or by using
the Mobile Device Explorer. Refer to the Reference Guide on the
Companion CD for more information on performing this task.

* Follow the instructions
PC. Never perform a
Full Reset (hard reset) unless explicitly instructed to do so.


*******************************
3. KNOWN ISSUES AND WORKAROUNDS
*******************************


After the update is complete, two ActiveSync icons may appear in the
host PC’s system tray. Move the mouse cursor over the icons to make
the false icon disappear.

* Connecting the HP iPAQ Pocket PC to the host PC through a USB hub can
result in a communication error. Please connect the HP iPAQ Pocket PC
USB port on the host PC.

* Use a direct USB connection. Any other
connection type

___________________________________________________________________

Attached filehp_wm2003_4700_install.zip(30.26 MB)


Post has been editedP43ym - 12.06.11, 14:12
Reason for editing: official and workability



Rep: (288)
Something all the old firmware, do-whether official sources are newer?

kozhura Date • Date • 10.28.07 14:58:15
Alas, but no longer, the latest firmware from HP -Windows Mobile 5.0 2.01 released on July 27, 2006

Post has been editedP43ym - 12.06.11, 14:16



Rep: (288)
Are there the latest (unofficial) updates, for example WM5 and / or WM6? (provide a complete list if not difficult)

kozhura Date • Date • 10.28.07 15:03:18
Yes, there are, here are the links below with the version of the kernel and build:

WM5:
HP iPAQ 4700/4705 Re-Flashing (kozhura Edition) - This is an unofficial update from me, at that time (and even today), which has the latest build and core in WM5, in that theme there are two of my firmware - Russian and English.
Firmware Versions:

HTC Roadster (kozhura AKU 3.5 ENG) (mod -QwertY-) - This is a mod of my firmware, made by our most respected and best programmer site -QwertY- . The firmware includes third-party software + small registry tweaks, in general a great thing! Only English version available!

-QwertY- Date • Date • 07/01/2007, 10:17
A2DP earned, but the additional BT icon also appeared in the bottom panel.
Attached file_QwertY__Widcomm_Act.cab(24.66 KB)


WM6.1:
HP iPAQ 4700 WM6.1 (kozhura Edition) - Update WM6 from me for 4700. I do it all the time, at the moment there is a Russian and English version available.
In the attached file BootLoader is present.
Attached fileCEOS_UPD_WM6.1_ENG.kozhura_Edition_R4.rar(39 MB)


WM6.1
HP iPAQ 4700 WM6.1 (Alkor Edition)
Russian and English version.
In the attached file2R-Alkor.1S RUS, BootLoader is present. Thank you say baxxter .
Attached file2R_Alkor.1S.7z(38.81 MB)
M5 F4B61D1810AB0BD2C6AC023FB5FD476F
2R-Alkor.1.3.1SNEW Attached file2R_Alkor.1.3.1S.7z (38.72 MB)
сcd2160edd9fe1a0bde3e91545a6404fb
2E-Alkor.1.3SNEW Attached file2E_Alkor.1.3S.7z (36.77 MB)
MD5 7fe74242f14b7fa85a3bcef51e97a4bc

WM6.1
HP iPAQ 4700 WM6.1 PDAViet Edition
6.1 Rom by Algasystems based on the orginal Sanjay PDAViet Rom.
Attached filealgasystems_6.1.zip(36.02 MB)
MD5: ec1e3fc5cc3db46265b5f7e75a6d96d4
You can raise your reputation -Makital , for the link to the files.
Makital wrote
6.1 Rom by Algasystems based on the orginal Sanjay PDAViet Rom.

Downloading from storage:depositfiles. File size:73.81 MB

There is:
1 Original archive with firmware as it was algasystems_6.1.zip
2 BootLoader_GUI.exe and PagePool_Changer.exe are taken from the Alkor branch.
3 270208_1710.nb0 this is for changing PP (in the original it was 8, here 12. It may be necessary for 6 to deliver)

I went up to 100% further as always - 2 hards and that's it!
Everything flies after changing pool to 12 for 128 meg. Previously, not much slowed down. Now fully satisfied with the firmware. And the black theme is my favorite and not all sorts of azure but greenish tones!

More details on the topichere.

DownloadBootloader.

psymon wrote:
Hash Tab program (embedded in the file properties and has a separate tab) program for BB: HashTab_Setup.exe (780.87 kilobytes) .
Attached fileHashTab_Setup.exe (780.87 KB)


WM6.5
6.5_Alkor_B (RUS, Ver.B, Standart)

Attached file2R_Alkor.1.4.1S.7z(35.25 MB)
NEW
MD5 CE9F4B1ABF468153D8A9557D2C9B947A

Post has been editedkomok1965 - 26.10.11, 09:07
Reason for editing: added FAQ



Rep: (288)
Is it possible to flash right from WM 2003 to WM 5 2.01 without forced firmware up to WM5 2.00?

kozhura Date • 11/09/07 1:08:04 PM
Yes, use these utilities with an attachment.

Attached files

Attached fileFlashUtility.rar(605.67 KB)



Rep: (288)
How to flash with SD, and are all firmware compatible with this method ??

kozhura Date • 11/09/07 1:20:04 PM
Yes, all firmware is compatible with this method, all you need to do for this:
1. Have a card no more than 1 GB
2. Download this utility -sd_img.exe
3. In the command line, enter: sd_img.exe firmware_name.nbf nk.raw
4. Download this program -ntrw.exe
5. Insert your card into the card reader
6. Enter in the console: ntrw.exe write nk.raw X: - where X, the name of your card

chamine Date • 11/18/06 8:34:34 PM
!!! Attention - when you call the bootloader, the PDA performshard reset(relevant for 2003) ... but actually we want to flash it in general, so I think it's not scary

What is required for flashing / saving firmware, etc. hx4700 with sd card:
1. Actually the SD card and card reader. I tried on the 256 and 512-meter maps.
2. Cradle or cord in USB, or they say the cord in the COM port is also good - everything worked for me through the cradle.
3. Download the program MultiTTY (by Google or by link from this forum)
4. Well, actually the firmware itself, or rather the .nbf file.

First of all, it is best to backup the current firmware:
- We get rid of the active-sync program on a regular computer - the task manager and beat the wcescomm.exe process
- Enter the PDA into the bootloader - simultaneously press the contacts + itask + reset buttons with the stylus and wait at this position for a few seconds until the different inscriptions and the HP logo without backlighting appear on the screen. (Do not forget the way thathard reset PDAit will be provided ...)
photo how to enter the bootloader
Picture

- Put the PDA into the cradle (or connect to the COM port) - when connecting to USB, the USB display should appear on the PDA screen above the HP logo (for the COM port or when the PDA is not connected - correspondingly Serial)
- We start MultiTTY - in the case of a USB connection, select the USB port - it will be an inscription like WCEUSBHXXX, if there is no such choice - or someone else blocks the USB port - let's say activesync isn’t nailed ... well, or just oops - everything is buggy end - roll dumplings, smoke into the chimney, firewood to the original ...
- Insert the SD card into the PDA and type d2s command in MultiTTY (well, of course, you can click the input). It takes some time to wait until MultiTTY says Store image to SD / MMC card successful. By the way, the map will lose everything that was there, hmm ... but something new will appear on it, namely the current firmware of the PDA.
- Everything ... now this card can be removed and used to restore the PDA firmware or to flash someone else's PDA. To do this, you must first insert the card, then enter the PDA in the bootloader mode - after that it should give an inscription about what needs to be done (press the Power button) to flash it. If the inscription does not issue - you can pull out the battery for a while, the card and repeat - sometimes it helps ... sometimes the truth is not lucky ...

Now how to flash to make such a card from an existing .nbf file from the full (! I tried only the full!) Firmware:
- First you need to see what the CCP wrote to us on the USB flash drive from the previous paragraph (you can not watch but use, say, my data, but maybe they differ in different CCP and different revisions of the bootloader). We start WinHex, we insert this card with firmware into the card reader. In WinHex, choose Tools ->Disk editor and there we select the Physical disk (Physical!) Corresponding to the card (to understand which of them - we pull out all the cards and flash drives from the computer except this one and select Removable - most likely it will be necessary). If this is what you need - it should begin with the words ROADSTER inside. Select a piece from the very beginning (from the words ROADSTER) to the words ECEC - a total of 476 bytes and save (Edit ->Copy Block ->Into New File) to a file. This is the title of the firmware ... Naturally, if you want to do everything absolutely right, you need to make this title yourself by examining the numbers there and realizing what they mean - there is the firmware size, checksum and something else ... But for now, it will go.
- Further ... in the same place in WinHex, open the .nbf file from the desired firmware (in order to get it, you need to run the firmware utility - it will unpack into some directory (like c: \ Ipaq \) its files - well, among them it will be ). In the open file there will be 2 necessary pieces of firmware starting with the same words ECEC - in the first IMHO there is the bootloader code (judging by the inscriptions inside) - it is not needed (uh ... scary to try to flash it in actual fact ...) ... The second - the firmware itself - make no mistake - there may be a lot of words ECEC - in my case, I missed the first two - the third is it. It is easy to distinguish - at the piece of firmware, after the words ECEC, there is a small amount (150 somewhere) of zeros and after the country code - for example, USA for the American firmware). (It starts with offset 0x40A68). Starting from these very ECECs, this piece should be cut out - we stand at the beginning (letter E) in the menu Edit ->Define Block and, accordingly, from Current Position to End of file. Also copy this block to a file. It should make a big file - for example, I have 127 megabytes.
- Now ... you need to glue these two files (the title and the firmware itself) and write the result on a USB flash drive ... To do this, open for example the title - Edit->Select All, then Ctrl-C. Then we get to the beginning of a large file - paste Ctrl-V ... at the end of all this, you need to add the word "HTCE" (Home, Edit->Paste Zero Bytes - 4 bytes and enter the word HTCE). So it turned out. scheme ...
0x00000000 - ROADSTER
...
0x00000180 - HTCSA004000007FC (this is apparently the block start marker for the firmware)
...
0x000001DC - ECEC (here comes the piece that was cut from .nbf)
...
0x07F8019C - HTCE (end of the block for the firmware)

... uhhh ... everything you get can finally be saved to a file ...
... nda ... a long explanation, but if you understand what's the matter - everything is simple - the main thing is to correctly cut out a piece of firmware from the .nbf file from the words ECEC after which the country code goes well and not to be mistaken ...
... for an example of how the firmware was made and control of the correctness of the location of the words HTCS, HTCE can be studied which is stored by us on a flash drive
All the firmware that goes to the flash drive should be 0x7F801A0 in size. At the end of the file, you can (and most likely even need!) Add zeros before rounding it up to 512 bytes in size (size of a flash drive sector, perhaps).

Next - you can copy the resulting file to a USB flash drive (better to a new one! If you have made a backup, so as not to screw up the old backup for recovery!). ATTENTION!!! He can not go there just like that and write! I need WinHex again ... Insert the USB flash drive - select Tools ->Disk tools ->Clone Disk. As the source, you must select this file we created by ticking "Read sectors from image file". As a destination - again Physical disk which corresponds to the flash drive. (The main thing is not to miss !!! Otherwise, if you select a regular screw, it will definitely not be good for him because the firmware for the PDA is being shoved there ...)
Next, put a checkmark on the "Copy entire source file" and zero sector (0) in the position to start copying. The program will most likely swear that the number of sectors does not correspond to the file size if no zeros are added to the end of the file in order to round its size ...

Everything ... the flash is ready ... you can now insert it into the PDA, insert the battery and go into the bootloader - if the file was correctly compiled and recorded - it will sew ... Yes! After flashing, it will swear that the checksum is incorrect because we "glued" the file ourselves and the checksum was in the header from another firmware - it swears ... but it will not affect the operation of the system

One more thing - the firmware saved on the flash drive (which came out after the d2s command) can be saved to disk as a file in the WinHex, and then rolled up, for example, on the disc and kept in reserve in case of rollbacks back from the firmware curves, after installing Linux on the PDA , atomic war and so on ...

Post has been editedkomok1965 - 01.04.10, 01:47
Reason for editing: photo



Rep: (288)
Is there an alternative way of flashing besides using the utilities of HP RUU and firmware with SD?

kozhura Date • 11/09/07 1:33:04 PM
Two more ways:

1. There is a beautiful program from Yozhich , all instructions are written in the program itself, download from the attachment

2. Kiba Date • 12:03:22
The method of firmware through the program BootLoader software (not to be confused - a consonant name with the mode in which the PDA is driven).

1) You gohere (read if you understand English)
2) Downloadingprog itself
3) Be sure to copy (this is better, believe) to the root of the disk ... say C: \
4) Downloading the firmware
5) You unpack the firmware file (.nbf) in the root too, where BootLoader.exe already lies!
6) Now you must chop off ALL the firewalls, antiviruses (other nonsense) ... I also chopped off the Internet
7) You kill the ActiveSync process ("Task Manager" -> "Processes" -> wcescomm.exe)!
8) Now .. you drive your hx4700 into bootloader mode (bootloader). To do this, simultaneously press contacts + itask + reset with the stylus and wait at this position for a few seconds until the HP logo appears on the screen ... I still had the inscription "Serial" at the top (this is when hx4700 was NOT in the cradle!).
photo how to enter the bootloader
Picture

9) Now you insert your hx4700 into the USB-cradle connected to the computer (without any hubs!) ... the inscription changes to "USB" (instead of "Serial")
10) Now you run BootLoader.exe (which we have in this example on the C: \ drive)
11) After a couple of seconds, a window will pop up, where you will have to open the file ... in this window you open the .nbf file (which we also now have on the C: \ drive) ... the program thinks a bit (in fact, it creates another file but with the extension .nb0)
12) Then another window should pop up .. at this stage, the program itself automatically does everything for you! (as a result, the program connects to your hx4700 through a terminal application ... it changes something ... and then the memory-ROM flashing begins ... progress symbols should start running here)
13) In about 20-30 minutes, the stage is completed ... I just had a window saying “there is something ... Done” and the line “USB>"
14) You can now manually close everything ... the session does not need to be saved (if asked)
15) Now we are “starting” our hx4700 ... pulling it out of the cradle ... and doing it Hard-Reset several times (combination calendar + itask + reset with a stylus) ... doing it at least three times (I think even more time it was necessary to do).
16) And only after the n-th number of Hard-Reset ... FINALLY, you see that you are running the OS that you chose!
17) You are happy .. you are going to get drunk ...

Attached files

Attached fileFH_v.0.3a.rar(69.05 KB)


Post has been editedkomok1965 - 01.04.10, 01:48
Reason for editing: photo



Rep: (288)
How to flash familiar or Qutopia Linux?

kozhura Date • 11/09/07 1:54:15 PM
1. First, stock up with an SD card up to 256 MB, and CF 64MB
2. Then download the archive yourself.(Qutopia) , (familiar)
3. Now format the SD card in FAT32
4. After that, the flash driver must be written to the card (bootldr-1.2.3.rom, which is in both archives), for this download this program -ntrw.exe and enter ntrw.exe write bootldr-1.2.3.rom X:, where X is the name of your card
5.Insert the card into the device, go to the bootloader (iTask + contacts + Reset)
6. The Press Power to flash sign appears, we naturally press the power button and everything will be written by itself.
7. We take a CF card and format it in FAT, dump the remaining files from the archive, insert it into the PDA and then follow the instructions of the Linux loader



Rep: (288)
How can I replace Splash Screen with WM5 and higher?

Yozhich Date • 09/20/07 10:50:56 PM
But yesterday, I rewrote such a “set” on a delphi, making a normal graphical application, at the same time adding the ability to “patch” not only firmware files (* .nbf), but also images taken on SD.

a photo
Picture


In contrast to the laid out "set", not png pictures are fed into the program, but * .bmp bitmaps.

Manual

1. Prepare 2 images of 240x320 and 640x480 bmp 24-bit sizes.
When saving from Adobe Photoshop, you must select the image format
OS / 2 24-bit.

2. Unzip the program to any folder and run it.

3.1. On the "Previews" tab, click the left frame and select an image.
shown at system initialization (it should be 240x320)
3.2. Click the right frame and select the image shown in the process.
system boot (it should be 480x640)

4. Select "Process images" and wait a few seconds until the message appears.
"Image convertion done! .."

5. I) When saving images to the firmware file * .nbf (for HPRUU), select
Write ->Write to ->* .nbf Flash File. Then read and agree to
Disclaimer Then select the modified firmware file and wait for the message.
"Flash file modification complete.".

Ii) When saving images to a system image for an SD card (for firmware
without a computer), select Write ->Write to ->SD Card Image. Then
read and agree with Disclaimer. After select the file to be modified.
firmware and wait for the message "SD Card Image modification complete.".

6. Flash modified firmware.

Attached files

Attached filesplash_gui.rar(177.26 KB)


Post has been editedkomok1965 - 20.03.10, 01:38



Rep: (288)
Optimization of WM5 \ WM6 systems

arei Date • 11/27/06 5:26:34 PM
We do SKTOOLS optimization - for performance, or the same handles (theme:Sktools.)

Increasing the GDI buffer (graphics): HKLM \ System \ GDI \ Glyphcache = set value from 131072 to 655360 (if you have 128MB RAM)
Increasing the TCPIP buffer: HKLM \ Comm \ TcpIp \ Parms \ TCPWindowSize = 65536
Turning off the animation menu: HKLM \ System \ GWE \ Menu \ AnimationType = 0
Increasing the number of simultaneous connections to the server
HKCU \ Software \ Microsoft \ Windows \ CurrentVersion \ InternetSettings \ MaxConnectionsPerServer = 16 (or 32 or more, depending on the thickness of the connection with the Internet)

the period between saving the registry (we increase it so that the filesystem wakes up less often)
[HKEY_LOCAL_MACHINE \ System \ ObjectStore \ RegFlush]
"ActivityThreshold" = dword: 00000001 change to 16 (0x10)
"FlushPeriod" = dword: ... change to 3600000 (0x36EE80) - saving the registry once an hour (instead of once a minute)
[HKEY_LOCAL_MACHINE \ System \ ObjectStore \ DBFlush]
"ActivityThreshold" = dword: 00000001 change to 16 (0x10)

necessarily - we redirect the browser cache to the card or ramdisk (if we intensively use browsers over WiFi, that is, with a high download speed, and included pictures, and we are not satisfied with the speed of writing the cache to the card). NB! On ramdisk it makes no sense to transfer cookies and history.
We put the opera on the map, if correctly installed in Application Data \ Opera, less than 100kb remains.
Add to opera.ini under [User Prefs]
Cache Directory4 = \ Ramdisk
for PIE, you can use SK Tools or correct
[HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Shell Folders]
"History" = "\ CF Card \ Temp \ History"
"Cookies" = "\ CF Card \ Temp \ Cookies"
"Cache" = "\ Ramdisk \ Temporary Internet Files

we take ramdiskhere . Attached fileGenericWM5RAMDisk.zip (6.46 KB)

Copy to the Windows folder. We use the size 4096. C large size problems are possible.

Optionally, delete the extra file from My Documents \ templates and images from Hape.

For advanced users! Move dll and exe from Windows to the card
Using SKTools or pens we add a folder, and drag all sorts of dlls there, check if they continue to work after that.
HKLM \ Loader \ SystemPath =
\ Release \
\ CF Card \ Program Files \ Dlls

we speed up the connection speed over bluetooth with the phone in the DUN profile (dialupnetwork)
First, we set the speed for our connection to 115200. This will help us find the necessary bytes which we will replace later.
We find in the registry a branch with the parameters of your BT connection
HKCU \ Comm \ RasBook \ My Connection \ DevCfg
this is an array of values.
115200 dec = 01.C2.00 hex, which are stored in memory backwards ie like 00.c2.01
find the sequence 00.c2.01 (13th, 14th, 15th byte) and replace it with a new value, for example

256000 kb \ s = 3E800 ->00.e8.03
384000 kb \ s = 5DC00 ->00.dc.05
460800 kb \ s = 70800 -> 00.08.07
921600 kb \ s = E1000 ->00.10.0e

This value must be greater than the speed of the cellular Internet to cover the protocol costs. I stopped at a speed of 460800, because I have UMTS (maximum 384). users of edge should be enough 256000.
Turn off the ipac for a minute to save the registry changes, reboot.

connect to wifi G only access points (tweak is not tested to the end, sometimes it works)
add HKLM \ Comm \ Tiacxwln1 \ Parms \ dot11SupportedRateMaskG = 8

kozhura Date • 10/21/07 01:18:36
Increasing the file system cache
HKLM \ System \ StorageManager \ FATFS
CacheSize = 8192 (for example, cache = 8192 * 512 = 4M)
EnableCache = 1 default

We take a stub filesys with attach

On WM5 and WM6 - pp8 (owners of 64M RAM) / pp16 (owners of 128M RAM) - on any activity the filesys activity decreases by 60%, the CF card no longer falls off.

Attached files

Attached filepatch_filesys_f3.exe(4 KB)


Post has been editedkomok1965 - 22.02.11, 15:19



Rep: (288)
How can I flash from under Windows Vista?

kozhura Date • 05/01/08 01:18:36

This method is only for Windows Vista 32 bit (Final & SP1)

1.We gohereand in the list below download Windows Mobile Device Center
2. Install and connect to our typewriter (in the lower right corner it will be written Connected)
3. Download the driver itselffrom hereand unpack somewhere
4. We translate the animal into the bootloader (contacts + itask + rezet) and insert it into the cradle, whist will see it as an unknown device, but we do not despair, look at the next item
5. Go: Start ->Control Panel ->System ->Device Manager and find what I have on the screen shows:
Attached Image

Choosing HP USB Sync
6.In the opened window, select the Driver tab ->Update, select Next, Run a search for drivers on this computer ->Select a driver from the list of already installed drivers ->Install from the disk and then open our unpacked USBASS folder in the review and click OK and the installation will go
7. Now you can flash anything and anything.

Post has been editedkozhura - 01.05.08, 18:42



Rep: (214)
At the initial stage, the firmware was interrupted, as a result of which the device hangs in bootloader mode.

Home tyrant Date • 9.1.2010, 0:56
Recently acquired hx4700 with WM2003 on board. Immediately there was a desire to upgrade to WM5, so that you could normally boot Linux from the card. But at the initial stage, the firmware was interrupted, as a result of which the device hangs in bootloader mode. Tell me, please, how can it be reanimated?

Home tyrant Date • 9.1.2010, 11:23
The device is restored using FlashHelper.

Yozhich Date • 07.7.2007, 0:12
Alternative hpRUU for PDA firmware. It does not require ActiveSync, in fact, the archive contains everything you need for firmware from any computer.

Using:
1. Unzipped close to the root of the disk, the address should not contain Russian letters and (preferably) spaces.
2. Firmware is placed in the same folder. (* .nbf file only)
3. FH_main.exe is launched and used (or FH_main_ru.exe is a Russian version)
4. Further - according to circumstances =)

The program was tested with the firmware of my 4700 original 2.01 and from kozhura. It was done all the rules.

Theoretically, it can be used for firmware not only 4700, but also other devices, but I can not check it, because there is nothing =)

In this version (so far) there is no file check for "validity", i.e. See what you fill!

This is the alpha version, testing & comments are welcome ...

p.s. The archive has the source code, the code is not particularly cleaned ...


Attached files

Attached filerus.rar(67.4 KB)


Post has been editedkomok1965 - 22.01.11, 00:19



Rep: (214)
How to fix a PDA or install WM6.x on iPAQ HP4700 for a teapot.
DownloadBootloader.
FirmwareWM5, WM6.
Like on devicedo XP (hard reset)?

How to reflash the PDA?

baxxter Date • 11/20/2008, 0:15
Installing WM6.x on iPAQ HP4700 for the kettle, underWindows xp maybe go for whists.

1. Download the archive with the necessary Windows mobile (WM) only for iPAQ HP4700.
2. Unzip the contents of the archive to drive C:
3. For reliability, download BootLoader_GUI.exe and also copy to the C drive:
4. We charge the battery HP4700 to 100%.
5. We transfer to the firmware mode HP4700 by clamping the buttons in the 2 + 4 + Soft reset sequence (in Russian: notebook + curved up arrow + reset button, dimple with a stylus diameter at the bottom of the PDA) and put it in the cradle.
photo how to enter the bootloader
Picture

Think about whether you need a new firmware? If the firmware fails (the computer freezes, the electricity is turned off, any program (antivirus) has stopped the firmware process), the HP4700 may not turn on again!If it does not stop, then we reinsure ourselves and disconnect everything that is superfluous in the computer and from the computer, it's good to also buy an uninterruptible power supply unit.
6. Run BootLoader_GUI.exe and select the firmware file from drive C: with the extension .nbf or .nb0
7. We are waiting for BootLoader to write 100% ( in some cases, and less, as the author of the firmware warns ~ 38% ) or will report the completion of the installation of the new WM.
8. Disable the PDA and do a two-way hard reset (XP) , we press the buttons 2 + 3 + Reset, release, then press 1 (in Russian: we hold down the note book + mailbox + reset button, release, then we press the calendar). And we wait a minute until WM6.x downloads. If it is not loading, we do XP again.

Like on devicedo XP (hard reset)?
1.HP 4700 + WM2003SE
1. We simultaneously hold the buttons "iTask" and "Calendar" + press "Reset".
2. It is necessary to hold the combination until the screen goes out completely, but not less than 5 seconds.
3. After releasing the buttons on the front panel, briefly press the “Reset” button again.
2.HP 4700 + WM5 (also relevant for WM6) -
XP is done by pressing the button 2 (contacts) + buttons 3 (mail) + reset, then we confirm the desire to make XP button 1 (calendar)
Picture



msj Date • 11.6.2008, 10:42
1) You drive your hx4700 into bootloader mode (bootloader). To do this, simultaneously press contacts + itask + reset with the stylus and wait at this position for a few seconds until the HP logo appears on the screen ... I still had the inscription "Serial" (this is when the hx4700 was NOT in the cradle!).
photo how to enter the bootloader
Picture

2) Now you insert your hx4700 into a USB cradle connected to the computer (without any hubs!) ... the inscription changes to "USB" (instead of "Serial")
3) Now you run BootLoader.exe (which we have in this example on the C: \ drive)
4) After a couple of seconds, a window will pop up, where it will be necessary to open the file ... in this window you open the .nbf file (which we also now have on the C: \ drive) ... the program thinks a bit (in fact, it creates another file , but with the extension .nb0)
5) Then another window should pop up .. at this stage, the program itself automatically does everything for you! (as a result, the program connects to your hx4700 via a terminal application ... it changes something ... and then the ROM-ROM flashing begins ... progress symbols should start running *

If BootLoader_GUI.exe gives an error and the flashing process does not start, then try method number 2:


imperror Date • 11.6.2008, 12:01
Here's how to sew directly with mtty.
Do not suffer with BOOTLOADER, throw mtty in the root and firmware, call it shorter, for example, os.nb0, then drive the animal into the bootloader mode (bootloader). To do this, you simultaneously press contacts + itask + reset, kill the active, put the animal in the cradle, launch mtty, select the port from the list in mtty (by default there is a port on it), write:
password BOOTLOADER you press Enter
The animal should answer something like: HTCSPass.<YHTCEUSB>
you type further: lnb C: \ os.nb0 you press enter, if everything is done correctly the download of the file should go to the animal, after the end, the animal will write:
HTCEUSB>
Wait 30 seconds, pull out of the cradle anddoing XP .

I forgot to say that after lnb and after uploading, the animal writes a bunch of information.

Like on devicedo XP (hard reset)?
1.HP 4700 + WM2003SE
1. We simultaneously hold the buttons "iTask" and "Calendar" + press "Reset".
photo how to enter the bootloader
Picture

2. It is necessary to hold the combination until the screen goes out completely, but not less than 5 seconds.
3. After releasing the buttons on the front panel, briefly press the “Reset” button again.
2.HP 4700 + WM5 (also relevant for WM6) -
XP is done by pressing the button 2 (contacts) + buttons 3 (mail) + reset, then we confirm the desire to make XP button 1 (calendar)
Picture


Post has been editedkomok1965 - 01.04.10, 01:53
Reason for editing: photo



Rep: (214)
BootLoader shows 38% already half an hour.
foresterTrof Date Mar 29, 2010
BootLoader shows 38% already half an hour. Everything was done? Do XP?


Instruction for a teapot bybaxxterDate • 11/20/2008, 0:15
p7. "We are waiting for BootLoader to write 100% ( in some cases, and less, as the author of the firmware warns about ~ 38% ) or will report the completion of the installation of the new WM. "
Instructions for the kettle without cutssee above.



Rep: (214)
I can not go into the bootloader. Explain how to do it correctly.
w0rm Date †3/30/2010 13:29
I can not go into the bootloader.

Alex * K Date †3/29/2010 4:56 PM
To transfer the machine to the firmware mode (bootloader), do this:
Push simultaneouslyLEFT UPPER (2) button and LOWER RIGHT (4) button (first action), then NOT letting go them, tych stylus in the "hole reset" (second action).
Attached Image
StSlam Date • StSlam 4.8.2006, 11:14
The bootloader is recognized by signs: a dark HP Invent screen, you can discern the word Serial .

seventh Date • 12/17/2006, 14:57
While holding Contacts + iTask, press the stylus into the reset and hold for a couple of seconds.
The lights will be cut out and on the screen you can see HP logo and Serial on top .

Post has been editedkomok1965 - 29.06.11, 12:02
Reason for editing: smiles signature off



Rep: (214)
Writes clearing data, please wait. What to do?
Volshebnik Date • 07.25.2008, 14:03
Filled by technology on the card. (SD 512). I launched the firmware from the card. Reached 100% (atthe last firmware% stop at 38%!, BootLoader shows 38% already half an hour. ) and said Komplit ...
I'm doing XP ...Writes clearing data, please wait. We wait. And silence. We do some XP, just in case. All the same.
What did wrong?


Graf Date • Gair 25.7.2008, 15:49
It happens up to 20 minutes lasts!

night-prizrak Date • Oct 3, 2008 9:09 am
Stitching, then after reflashing, press XP.,
How to make a hard reset on the device?
How to make a hard reset on the device?

mzonder Date †12/18/06 6:06:09 PM
1.HP 4700 + WM2003SE
1. We simultaneously hold the buttons "iTask" and "Calendar" + press "Reset".
2. It is necessary to hold the combination until the screen goes out completely, but not less than 5 seconds.
3. After releasing the buttons on the front panel, briefly press the “Reset” button again.
2.HP 4700 + WM5 (also relevant for WM6)
XP is done by pressing the button 2 (contacts) + buttons 3 (mail) + reset, then we confirm the desire to make XP button 1 (calendar)
Picture

1-2 seconds and wait again XP. If you didn’t start right away - (the picture of HP hangs) - wait in this state for 15-20 minutes (it is desirable that the beast stood in the cradle) After 20 minutes, press XP again and wait 20 minutes again. So up to 5 times (in total, this process will take up to 2 hours). If after this the animal did not come to life, then ask it again. If after the second firmware it does not start up - our original 2003CE (firmware rollback to WM2003SE? ), and already on it 6.1.

abuilder Date • 07.27.2008, 12:08
Also XP. I did not go until I put it in the cradle, i.e. need to connect external power. With the battery hanging on clearing data.

I was stitching through the cradle - usb.


kozhura Date • 10.6.2008, 1:46
So try to change again, sometimes it happens.



Rep: (214)
Under Windows 7 is stitched?

Flatr Date • 04/25/10 23:59
Under Windows 7 who sewed?

Kolyk Date • 04/26/10 0:56
Under win 7 32, it is sewn without problems.

Alkor Date †10/20/2010 12:47

I use the 7th x64 solved the problem easily. Put a small virtual machine and no problems with firewoodMicrosoft. There choose options, download and all. On virtualku put asset sync and you can sew everything.
PostedFAQ How to flash under Windows XP and Windows 7. FAQ.7z (397.74 KB)

description
wikipedia: VirtualBox (Oracle VM VirtualBox) - software productvirtualizationfor Microsoft Windows, Linux, FreeBSD, Mac OS X and Solaris / OpenSolaris operating systems.
Microsoft:Windows Virtual PC.
Windows Virtual PC is the latest Microsoft virtualization technology. It allows you to run many applications in a virtual Windows environment with one click directly from Windows 7 on a computer running.

Operating systems supported node
• Home Basic Windows 7
• Home Premium Windows 7
• Windows 7 enterprises
• Windows 7 Professional
• Ultimate Windows 7
Supported Guest Operating Systems
• Updates for Windows XP Service Pack 3 (SP3) Professional
• Windows Vista Enterprise Service Pack 1 (SP1) and later
• Windows Vista Ultimate Service Pack 1 (SP1) and later
• Windows Vista Business with Service Pack 1 (SP1) and later *
• Professional Windows 7 *
• Windows 7 Enterprise.
• Ultimate Windows 7
* Note Virtual applications are not supported in Windows 7 Professional or Windows Vista Business. All other features of Windows Virtual PC are supported in these two guest systems.
Go to top of page
How to get Windows Virtual PC
Visit the Microsoft Web site to download the appropriate installation package for your system:
Download


microsoft : How to download Windows XP Mode?

1. Windows 7 has several built-in tools to help with program compatibility and Windows XP programs can be installed directly on Windows 7. A Windows XP image runs old programs that may not work on Windows 7. Visit the Windows 7 Compatibility Center to find software that works with windows 7.
2. Select Windows 7 and the desired language for installation.
"Select system" "select language"
3. Download and install Windows XP Mode
Windows XP Mode you need to download and install the files below.


Topic: Windows Virtual PCpcportal.org

Vals Date • 10/21/2010 5:15 AM
Firmware for Win 7 RU.

Turn off the computer. Loading with key pressedF8 .
We get a black screen. Choose the item as in the picture
Attached Image

Press Enter.
After the system is loaded, we transfer the machine to the Bootloader and put it in the cradle.
Next, right-click on My Computer ->Properties ->Device Manager.
In the window that opens, look for the item indicated by the number 1.
Attached Image

On it the right button ->Update drivers.
In the next window, click the caption:
Attached Image

and click on the buttonInstall from disk - figure 2, in all other ways we will receive a message that we have the newest drivers.
Next on the buttonOverview - number 3 and select the folder with the drivers. Ok . We press Further and complete the installation.
Run the programBootloader , choose an image and flash it.
With the next firmware, if the computer restarts, you will have to repeat everything from the beginning.
Good luck.

Post has been edited-del- - 23.11.12, 09:22
Reason for editing: image correction



Rep: (214)
Alkor. Rus 2.5 refused to connect via WPA-PSK wifi TKIP encryption on a configured router.
imperror Date • 07.7.2009, 20:26
Alkor.Rus 2.5 refused to connect via WPA-PSK, TKIP encryption on the configured router (the previous version clung without problems), and also refused to synchronize with Vista.

Andrey_ Date • 07.7.2009, 20:53
The icon appeared in the settings manager, green as usual. And - the eternal connection.

DarkGuardian Date вЂ.7 07.25.2009, 21:42
Works when applying fix from attachment:WiFi_fix_by_Vagus.cab(89.6 kilobytes)



Rep: (214)
When you try to flashing 4700 via BootLoader_GUI, the message is displayed: "\\. \ WCEUSBSH001 port can not open"
Motaros Date • 1.7.2010, 16:14
Guys, when you try to flash 4700 through BootLoader_GUI, the message is:

"\\. \ WCEUSBSH001 port can not open"

What is this port and what can it be connected with?
PS Is Win7 x64 worth it - can it be the cause?


svstar Date • 6.2.2010, 20:26
I found a detailed and sensible description of how to enable the bootloader under vista and windows 7, both in 32 and 64 versions. You no longer need to bother with writing to the sd card! Everything is working!
To readhere.

Description of how to enable the bootloader under vista and windows 7, both in 32 and 64 versions.
Jeka102 Date • 7.7.2010, 10:07
DownloadAttached fileDrivers.zip(98.18 KB)

You can also downloadhere. Registration required!
It was stitched from the win7 axis!

FAQ - Firmware for Win 7 RU.

Post has been editedkomok1965 - 21.10.10, 22:50



Rep: (214)
komok1965
Found on the Internet a lot of information on JTAG.
I did not encounter such a problem, sorry, I will not tell you.
Topic onsavagemessiahzine.com: Resuscitating devices with JTAG

WikipediaJTAG
JTAG (short for Joint Test Action Group) is a specialized hardware interface designed to test assembled printed circuit boards (using the IEEE 1149.1 standard). Due to the wide functionality, JTAG has become widely used for debugging and programming.
Currently, the JTAG interface is used for peripheral scanning. This term refers to the testing of printed circuit boards, with processors installed on them, FPGAs, flash chips, etc., for the presence of short circuits, non-sealings, 0 or 1 in electrical circuits. BSDL file that is provided by the developer of this chip. In most cases, these files are on the websites of manufacturers of microchips.
Test port (English Test Access Port) consists of four or five dedicated pins of the microcircuit: TSC, TMS, TDI, TDO, ~ TRST (optional).

JTAG Port ICs and Peripheral Scan Cells
The functional purpose of these lines:
 TDI (test data input) —input of the peripheral scan serial data. Commands and data are entered into the microchip from this pin on the leading edge of the TCK signal;
 TDO (test data output) - serial data output. Commands and data are output from the chip from this pin on the falling edge of the TCK signal;
 TCK (test clock input) - clocks the operation of the built-in peripheral scanning control machine. The maximum scanning frequency of peripheral cells depends on the hardware used and is currently limited to 25 ... 40 MHz;
 TMS (test control input) - provides a choice of test mode.
 In some cases, a TRST signal is added to the listed signals to initialize the test port, which is not necessary, since initialization is possible by applying the appropriate signal sequence to the TMS input.
The operation of the JTAG interface hardware is subject to the signals of the control unit built into the microchip. The states of the automaton are determined by the TDI and TMS signals of the testing port. A certain combination of TMS and TCK signals provides command input for the machine and its execution
If the board has multiple devices that support JTAG, they can be combined into a common chain. A unique feature of JTAG is the ability to program not only the microcontroller (or FPGA), but also a flash memory chip connected to its pins. Moreover, there are two ways of programming flash memory using JTAG: through the bootloader with the subsequent exchange of data through the processor memory, and through direct control of the chip outputs.


INSTRUCTIONSfor PXA27X based hardware repair, Manual for recowery PXA27X
The algorithm works on all communicators with PXA27X processors and other Marvell / Intel PXA series, as well as most processors on the ARM core.
HP hx4700 JTAG Recovery, HpIpaqHx4700Hardware,
HP iPAQ hx4700 JTAG-Download uploaded to the site.
Attached Image


Attached files

Attached fileJTAGiPAQhx4700V1_0.pdf(468.19 KB)


Post has been editedkomok1965 - 20.09.10, 21:37


Full version    

Help     rules

Now: 07/08/19, 02:29