A code that displays information about the device.
*#*#116#*#*
Firmware is the same difference in camera drivers.
With Needrom ANDROID 4.4.2
https://cloud.mail.ru/…04%2FAndroid%204.4.rarANDROID 4.4.2
https://cloud.mail.ru/…_2GB_16GB_20140928.zipHow to flash:
Download and unpack the program SP_Flash_Tool on your computer
Download and install USB VCOM drivers.
Factory firmware for your smartphone.
Turn off the smartphone. The cable is not connected to the computer.
We take out and insert the battery back. (Skip if the drivers are already installed)
We connect the phone to the computer with a cable. The operating system will find a new device - specify the system folder with the USB driver VCOM (for its version of the OS).
(skip if the drivers are already installed) Disconnect the cable from the computer.
Run the program SP Flash Tool.
Click on the Scatter-loading button and select the MT6592_Android_scatter_emmc.txt file (it is in the folder with the firmware, the devices are different, therefore the file will be named after the processor name, for example MT6789, etc.).
IMPORTANT! For phones based on MT6575 and MT6577, uncheck the Preloader and dsp_bl items, for phones based on MT6589, MT6572 and MT6592, just tick the Preloader.
Press the Download button. (I personally had the error "pmt changed", where you should select "upgrade firmware" from the download menu)
Connect the phone to your computer turned off cable. The program should see it and start flashing. If your phone is not detected, disconnect it from your computer, remove and reinsert the battery and reconnect to your computer. In Device Manager, when correctly installed drivers at the time of the firmware should com port monitor mtk usb port (MediaTek PreLoader USB VCOM Port). And on completion of firmware or any occurrence of a fault and the device disappears from the device manager
That's all ... then the menu factor-factor reset-wipe cache-wipe is still something)))