TP-Link TL-WR940N - Discussion | [wifirouter] Setting



Rep: (1967)
TP-Link TL-WR940N - Discussion

Attached Image

A photo
Ver 1 - Ver 2
Attached ImageAttached Image
Ver 3 - Ver 6
Attached Image
Attached Image
Description:
Wireless Router TL-WR940N - is a combined wired / wireless network device, designed for use in small and home offices. Using MIMO technology, TL-WR940N allows you to create a network of ultra high data transfer speed, making possible the finest performance applications such as online viewing of high-definition video, IP-telephony and network play. The device is made in a stylish package, and is equipped with a button QSS for quick WPA2 security settings.
Specifications
Ver 1 - Ver 2
Hardware
Ports 4 10/100 Mbps LAN port
1 10/100 Mbps WAN port
Buttons Quick Protection Setting Button (QSS)
Reset button
External power supply 9V DC. current / 0,85A
Standards of wireless data transmission IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
3dBi Antenna * 3 fixed omnidirectional antennas
Size (W x L x H) 200 x 140 x 28 mm
Parameters of the wireless module
The frequency range of 2.4-2.4835 GHz
11n signaling speed: up to 300 Mbps (dynamic)
11g: up to 54 Mbps (dynamic)
11b: up to 11 Mbps (dynamic)
EIRP (Wireless Power)<20 dBm (EIRP)
Sensitivity (reception) 270M: -68 dBm with 10% PER
130M: -68 dBm with 10% PER
108M: -68 dBm with 10% PER
54M: -68 dBm with 10% PER
11M: -85 dBm at 8% PER
6M: -88 dBm with 10% PER
1M: -90 dBm at 8% PER
Wireless functions Enable / Disable broadcast, WDS bridge, WMM, Statistics
Wireless protection 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Software features
WAN connection type Dynamic IP / Static IP / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond
DHCP Server, Client, DHCP Client List, Address Reservation
QoS (Quality of Service) WMM, Bandwidth Control
Port Forwarding Virtual Server, Port Launch, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN pass-through PPTP, L2TP, IPSec (ESP Head)
Access Control Parental Control, Local Control, Host List, Access Schedule, Rules Management
Network security (firewall) DoS, SPI firewall
Filtering by IP Addresses / Filtering by MAC Addresses / Domain Filter
Binding IP and MAC addresses
Management Access Control
Office in place
Remote control
Other
Certificates CE, FCC, RoHS
Scope of delivery TL-WR940N
3 fixed omnidirectional antennas
Power Supply
Information disc
Quick Installation Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў or Windows 7, MACВ® OS, NetWareВ®, UNIXВ® or Linux
Environmental Parameters Operating Temperature: 0 ℃ ~ 40 ℃ (32 ~ 104 ℉)
Storage temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
Humidity (operating mode): 10% ~ 90% non-condensing
Humidity (during storage): 5% ~ 90% non-condensing
Ver 3 - Ver 6
4 Interface 10/100 Mbit / s LAN port
1 10/100 Mbit / s WAN port
Button to enable or disable button Wi-Fi, WPS button / reset button, power button off and on.
Antenna 3 * 5 dBi fixed omnidirectional antennas
External power supply 12 V DC. current / 1 A
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Wireless Transmission Standards
Dimensions (WxLxH) 230 x 144 x 35 mm
Parameters of the wireless module
Frequency range (receive and transmit) 2400-2483.5 MHz
11n transfer speed: up to 450 Mbps (dynamic)
11g: up to 54 Mbps (dynamic)
11b: up to 11 Mbps (dynamic)
Sensitivity (reception) 270M: -68 dBm with 10% PER
130M: -68 dBm with 10% PER
108M: -68 dBm with 10% PER
54M: -68 dBm with 10% PER
11M: -85 dBm at 8% PER
6M: -88 dBm with 10% PER
1M: -90 dBm at 8% PER
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless Features On / Off. wireless broadcast, WDS bridge, WMM, wireless statistics
Wireless network protection 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
QoS (data prioritization) WMM, Bandwidth Control
WAN connection type Dynamic IP / Static IP / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond
Management Access Control
Local management
Remote control
DHCP Server, Client, DHCP Client List, Address Reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Access control Parental control, local management, list of nodes, access schedule, management rules
Network Security (firewall) Protection against DoS attacks, SPI firewall
IP Address Filtering / MAC Address / Domain Name Filtering
Binding IP and MAC Addresses
Protocols Supported IPv4 and IPv6
2.4 GHz guest network guest network
Other
CE, FCC, RoHS certification
Scope of delivery TL-WR940N
Power adapter
Ethernet cable
Quick Setup Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў, or Windows 8 / 8.1 / 10, MACВ® OS, NetWareВ®, UNIXВ®, or Linux
Environmental Parameters Operating Temperature: 0 в„ѓ to 40
Storage temperature: -40 в„ѓ to 70 в„ѓ
Humidity (operating mode): 10% - 90% without condensation
Humidity (during storage): 5% - 90% without condensation
useful links
Reviews


Post has been editedM | A | G - 30.04.20, 00:41



Rep: (27)
sahi777 @ 24.01.19, 03:02*
root 222
Instruction norms only unclear what kind of files, if possible more in detail,
and win if the firmware (factory) to this router through tftp error 18005.
I am the owner of this devaysa tp-link v6


All signed the same. The first file is a dump, for example, if the flash drive crashes and you change to a new, sewn programmer (paprimer CH341A).
The second file is the OpenWRT, factory so to speak. Sewn only through the TFTP, which is already in the archive, in the above instructions. All in one place, so as not to look. For I was looking for a very long time to third-party resources.

Post has been editedroot_222 - 24.01.19, 06:37



Rep: (8)
root_222 @ 24.01.19, 9:34*
The first file is a dump, for example, if the flash drive crashes and you change to a new, sewn programmer (paprimer CH341A).

Dump on the other router is needed v.5? Or dump laid out above, all versions of the router may be suitable?



Rep: (27)
nb-418k6 @ 24.01.19, 21:21*
Dump on the other router is needed v.5? Or dump laid out above, all versions of the router may be suitable?

You from V4 approach 100%. But once the matter has come to the dump - try, it is still OpenWRT. No unambiguous information, they are equal in chips.

Post has been editedroot_222 - 24.01.19, 19:47



Rep: (6)
* root_222
please tell me whether there is the extreme version of OpenWRT the inclusion of LED blue when the internet on LAN? to drain and work.



Rep: (27)
Parus2017 @ 25.01.19, 12:45*
please tell me whether there is the extreme version of OpenWRT the inclusion of LED blue when the internet on LAN? to drain and work.

I do not dig helluva lot, but it seems like management display somewhere saw. Not currently doing.



Rep: (21)
root_222 @ 24.01.19, 06:34*
The second file is the OpenWRT, factory say so

If it is not difficult to explain to this firmware v6 can change the region and the channel bypassing Putin?) All my neighbors kaloroutery beat all the standard channels that do not get through, whether it will expose the others? Rise speed / stability of the network?



Rep: (445)
* Andrey-sun,
If stitched OpenWrt:TP-Link WR1043nd - Discussion (Post Cemenovich # 81709949)
TP-Link WR1043nd - Discussion (Post LESHIY_ODESSA # 81671259)

Post has been editedvovan26_ - 28.01.19, 11:55



Rep: (27)
Andrey-sun @ 28.01.19, 13:10*
If it is not difficult to explain to this firmware v6 can change the region and the channel bypassing Putin?) All my neighbors kaloroutery beat all the standard channels that do not get through, whether it will expose the others? Rise speed / stability of the network?

The default is the US region and a choice of transmitter power up to 158mVt, unlike the factory firmware with its 100mW. The user who made glad as the elephant, because two-storey private house covered.

Post has been editedroot_222 - 30.01.19, 17:03



Rep: (5)
Good evening. There is a router wr940, felts 941, v6.polzuyus for several years, and nirazu not updated firmware. In the settings copied Build-150 317 3.16.9 version Rel.58284n.Podskazhite pliz, whether you need to be updated?



Rep: (60)
* Shahnazar If everything is working and there is no narikany, it is not worth ...



Rep: (0)
OXO, please help.
940N ver.3 became often hang and operate at low speed for WI FI.
Which firmware you can ask for iron I realized v.3 and v.6 no different.
Throw off a reference



Rep: (5)
* denistr_79 , Try it once on this firmware DD-WRT - alternative firmware (Post _Danil_ # 48233248) .
They say working steadily

Posted on 02/02/2019, 17:37:

* denistr_79 , I have the same router works well, if I were in your situation, I tried to



Rep: (0)
And which version to flash?



Rep: (5)
* denistr_79 So there is only one such version, a single file when sewn first, second eogda want to update. With the company. First, Honor, everything is painted that as a yes



Rep: (0)
Guys, do not know what to do. I have a router v.3.0. And the TV with Samsung smart tv, podkyuchen to it on wifi, but often lost online, watch nothing is impossible. What could be the problem? How to properly set up?



Rep: (21)
* Alex.Gum, you can try to flash Gargoyles ( it is based on OpenWRT, iron 940N v3should approachFirmware 941ND v6 ).
I myself have long 941ND v3.6 patched receiver Gargoyles and is much more stable than any native. Sews the first Gargoyles 1.6 or 1.7, and then only updated periodically (Now stitched v1.10).
Attached Image

*Sewn using gargoyle_1.10.0-ar71xx-generic-tl-wr941nd-v3Xs why web muzzle shows version 2, though it comes a separate file.

More about gargoyle can be readin the subject of 1043ND ( The same comments there haslink to HabrWhich explains the nuances of the Wi-Fi router ).

Post has been editedGrey83 - 03.02.19, 09:54



Rep: (3)
Greetings! Prompt please, on v6 dd-wrt there at all? I see only 3 ... I am a happy owner of the Internet on the pptp protocol, so the choice fell on this firmware. The other did not deliver, and memory, as I understand it, the installation of additional modules in our unit no.

Post has been editedFahrenheit - 14.02.19, 18:56



Rep: (3)
The people that I, the one with the "six" here? Help is very necessary port forwarding, which is simply a brazen does not work on the standard. Who put dd-wrt?



Rep: (445)
* Fahrenheit,
Will pioneer. :)
ftp://ftp.dd-wrt.com/b...9/tplink_tl-wr940ndv6/



Rep: (3)
* vovan26_ , So I tried them ... first true openwrt through tftp freewheeling, because it knocked the standard error (incorrect package name), but after the installation of dd-wrt router stops responding. I'll never know what's wrong. and the question - is it possible to dd-wrt through tftp install? or not even worth trying?


Full version    

Help     rules

Time is now: 07/05/20, 3:38