TP-Link TL-WR940N - Discussion | [wifirouter] Setting



Rep: (1854)
TP-Link TL-WR940N - Discussion

Attached Image

A photo
Ver 1 - Ver 2
Attached ImageAttached Image
Ver 3 - Ver 6
Attached Image
Attached Image
Description:
Wireless Router TL-WR940N - is a combined wired / wireless network device, designed for use in small and home offices. Using MIMO technology, TL-WR940N allows you to create a network of ultra high data transfer speed, making possible the finest performance applications such as online viewing of high-definition video, IP-telephony and network play. The device is made in a stylish package, and is equipped with a button QSS for quick WPA2 security settings.
Specifications
Ver 1 - Ver 2
Hardware
Ports 4 10/100 Mbps LAN port
1 10/100 Mbps WAN port
Buttons Quick Protection Setting Button (QSS)
Reset button
External power supply 9V DC. current / 0,85A
Standards of wireless data transmission IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
3dBi Antenna * 3 fixed omnidirectional antennas
Size (W x L x H) 200 x 140 x 28 mm
Parameters of the wireless module
The frequency range of 2.4-2.4835 GHz
11n signaling speed: up to 300 Mbps (dynamic)
11g: up to 54 Mbps (dynamic)
11b: up to 11 Mbps (dynamic)
EIRP (Wireless Power)<20 dBm (EIRP)
Sensitivity (reception) 270M: -68 dBm with 10% PER
130M: -68 dBm with 10% PER
108M: -68 dBm with 10% PER
54M: -68 dBm with 10% PER
11M: -85 dBm at 8% PER
6M: -88 dBm with 10% PER
1M: -90 dBm at 8% PER
Wireless functions Enable / Disable broadcast, WDS bridge, WMM, Statistics
Wireless protection 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Software features
WAN connection type Dynamic IP / Static IP / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond
DHCP Server, Client, DHCP Client List, Address Reservation
QoS (Quality of Service) WMM, Bandwidth Control
Port Forwarding Virtual Server, Port Launch, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN pass-through PPTP, L2TP, IPSec (ESP Head)
Access Control Parental Control, Local Control, Host List, Access Schedule, Rules Management
Network security (firewall) DoS, SPI firewall
Filtering by IP Addresses / Filtering by MAC Addresses / Domain Filter
Binding IP and MAC addresses
Management Access Control
Office in place
Remote control
Other
Certificates CE, FCC, RoHS
Scope of delivery TL-WR940N
3 fixed omnidirectional antennas
Power Supply
Information disc
Quick Installation Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў or Windows 7, MACВ® OS, NetWareВ®, UNIXВ® or Linux
Environmental Parameters Operating Temperature: 0 ℃ ~ 40 ℃ (32 ~ 104 ℉)
Storage temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
Humidity (operating mode): 10% ~ 90% non-condensing
Humidity (during storage): 5% ~ 90% non-condensing
Ver 3 - Ver 6
Interface 4 10/100 Mb / sec LAN port
1 10/100 Mb / s WAN port
Buttons Wi-Fi on / off button, WPS button / reset button, on / off button.
Antenna 3 * 5 dBi fixed omnidirectional antennas
External power supply 12 V DC. current / 1 A
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Wireless Transmission Standards
Dimensions (WxLxH) 230 x 144 x 35 mm
Parameters of the wireless module
Frequency range (receive and transmit) 2400-2483.5 MHz
11n transfer speed: up to 450 Mbps (dynamic)
11g: up to 54 Mbps (dynamic)
11b: up to 11 Mbps (dynamic)
Sensitivity (reception) 270M: -68 dBm with 10% PER
130M: -68 dBm with 10% PER
108M: -68 dBm with 10% PER
54M: -68 dBm with 10% PER
11M: -85 dBm at 8% PER
6M: -88 dBm with 10% PER
1M: -90 dBm at 8% PER
EIRP (Wireless Power)<20 dBm or<100 mW
Wireless Features On / Off. wireless broadcast, WDS bridge, WMM, wireless statistics
Wireless network protection 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
QoS (data prioritization) WMM, Bandwidth Control
WAN connection type Dynamic IP / Static IP / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond
Management Access Control
Local management
Remote control
DHCP Server, Client, DHCP Client List, Address Reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Access control Parental control, local management, list of nodes, access schedule, management rules
Network Security (firewall) Protection against DoS attacks, SPI firewall
IP Address Filtering / MAC Address / Domain Name Filtering
Binding IP and MAC Addresses
Protocols Supported IPv4 and IPv6
2.4 GHz guest network guest network
Other
CE, FCC, RoHS certification
Scope of delivery TL-WR940N
Power adapter
Ethernet cable
Quick Setup Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў, or Windows 8 / 8.1 / 10, MACВ® OS, NetWareВ®, UNIXВ®, or Linux
Environmental Parameters Operating Temperature: 0 в„ѓ to 40
Storage temperature: -40 в„ѓ to 70 в„ѓ
Humidity (operating mode): 10% - 90% without condensation
Humidity (during storage): 5% - 90% without condensation
useful links
Reviews


Post has been editedstp101 - 07.03.18, 16:01



Rep: (472)
* gnatki,
I need a router with Gigabit ports. Since then more than a hundred, and you will not wait in the settings do not change.



Rep: (11)
Good afternoon, it is possible to register in this routing DNS yandex?

Sam asked, he found ...
Attached Image


Post has been editedDeathman - 01.11.16, 19:36



Rep: (0)
a question arose. How do I know how many are currently consumes speed or that the device connected to the router (not packages and mbps) (eg: computer and smart tv)..



Rep: (1)
worth taking this router to replace the 740-th? important range of the signal, because the thick walls of the house, 740-D is lacking in 2 thick walls. the choice between this and the 841 that will advise?



Rep: (167)
* kornilagaevskiy,
Of good.
I was a normal 941 of the signal power. And that is all. No On-Off button, which is not good and firmware flew on it after three years.
Replaced ziksel kinetics of light three. Catches on the return from the eighth to the fourth etazha.Na reception somewhere in the six and a half. Home through two concrete walls without losing the strips on the icon. Just lovely. Council take ziksel kinetics of light three or higher model. TP Link not.



Rep: (0)
Hello. I bought a router v3, there was such a poser. Constantly having to enter a password to wifi, if the problem is not in the connected device, I have your phone number and his wife tried to connect, it is the same Trouble. Tell me how to solve the problem. Thank!



Rep: (9)
Hello everyone, something topics with TP-LINK TL-WR942N not found, ask a question here:
It is supported Huawei E3372s (MTS 827F / 829F, MegaFon M150-2, Beeline E3372 / E3370, TELE2 E3372h-153) on your TP-LINK, either model TL-WR942N without dancing with a tambourine (insert the modem into the router and forget it)?



Rep: (1)
* Alex1us In 940 no USB port)



Rep: (13)
I understand by AC, model 841n, and even more will be 845n-moschny?



Rep: (28)
Alternative firmware someone put? Confused that for a long time to boot after a reboot protokol.T.e Internet provider instantly provides authorization, but after the router web interface load is still not willing to authorize. You have to wait 5 minutes.
Attached Image



Rep: (1)
Available TL-WR940N V2. constant breakages. Alternative firmware to this version can not find. Can anyone help, tyknet link?



Rep: (28)
* postman ,

It can breakages due to the provider? you can log to see that there write? and was is when I cliffs, it is because of the provider. Of search, alternative firmware canopenwrt, He did not try and do not recommend. Better try to flash the official, can not the latest firmware, but more stable.



Rep: (5)
Dear friends! Tell me, do you have someone to complete the firmware dump fusion programmer on tp-link tl-wr940n v2.1 revision 1.0 motherboard? Please share.



Rep: (416)
* ActionMen,
If PF firmware contains a word not boot, it can be used to create a FF, and the parameters to take art section of fusion "killed" the dump.
You can also cut out of the fusion dump "killed" firmware and replace it by working.

Post has been editedvovan26_ - 28.06.17, 00:42



Rep: (5)
vovan26_ @ 28.06.17, 00:41*
If PF firmware contains a word not boot, it can be used to create a FF, and the parameters to take art section of fusion "killed" the dump.
You can also cut out of the fusion dump "killed" firmware and replace it by working.

Native USB flash drive suddenly died ... dump dump nowhere.

Post has been editedActionmen - 28.06.17, 07:36



Rep: (416)
* ActionMen,
What percents and the radio module at a router?



Rep: (381)
ActionMen @ 28.06.17, 00:09*
full dump firmware

Made off with the firmware. Write that this option works.
Attached file_wr940ndv2_wr941ndv5_en_3_16_9_up_fullflash (150311) .zip(3.12 MB)



Rep: (416)
* Herzz,
This is not a full flash, it is a common firmware without yubut!
wr940ndv2_wr941ndv5_en_3_16_9_up_fullflash (150311) .zip (3,12 MB)
Attached Image

full flash:
Attached Image


Post has been editedvovan26_ - 28.06.17, 11:12



Rep: (381)
vovan26_ @ 28.06.17, 11:06*
This is not a full flash

Herzz @ 28.06.17, 10:03*
Made off with the firmware.



Rep: (416)
* Herzz,
This is the RP firmware, not full flash! It can not sew programmer.

Post has been editedvovan26_ - 28.06.17, 12:31


Full version    

Help     rules

Time is now: 11/10/19, 20:44