[X]Assistant

[VVXL]

LG L70 Dual - Official firmware (OS 4.4.2)
LG L70 Dual
Description | Discussion пїЅ | Modifications and decorations for LG L70 D325 пїЅ | Unofficial firmware пїЅ | Official firmware пїЅ

Firmware

All versions of stock firmware in KDZ format d325, d320
Mod Stock 160 DPI
Odex firmware Stock D32510C_00 from greysv (root) [/ color]
Odex G3 Mod by Mark_Rus
Mini stock d325 v10f (BackUp) system - 922mb from qyakelll

Phone firmware methods

Firmware with Flashtool 2014
Photo instruction for firmware
An error occurred when entering the preload modedbi err fatal

Phone sprinkling methods

Instructions for exiting the Ramdamp mode
Instructions for scratching the phone with firmware in the .tot format
Phone recovery using QFIL (QPST)
Recovering a phone using a dump taken from a work phone
Repair IMEI on LG L70
Backup and Repair IMEI
Instructions from NikolayHAOS - how to create a Full Damp phone

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been editedvaalf - 11.03.18, 15:46

Reason for editing: dbi err fatal error when entering the preload mode

[spirit1983]

Thank you for participating and willing to help.nastor
Special thanks tokingart777for advice and assistance in solving the problem.
As a result of experiments, the instruction was born, I hope it will come in handy:

Instructions for exiting the Ram damp mode with subsequent flashing

Recovery instructions after manipulations in the service menu, as a consequence of the green screen Ram damp mode

1) Go to the sitehttp://www.lg.com/en/support-mobile/lg-LGD325and download the LGMobile Support Tool
2) Install and run the LGMobile Support Tool
3) In the left menu, click the button to install the driver, to install, select LGD325. The default version is 3.8.1. After installation, the program may ask you to update your driver to version 3.10. I recommend to refuse it, since it works and it’s not necessary to wait for the installation to finish.
3a) The working driver can be installed in advance, then you don't have to choose from an incomprehensible list. Link
https: //drive.google.c....dYRWM/edit? usp = sharing
4) IMPORTANT MOMENT! Click on the additional features in the LGMobile Support Tool program—>recovery after an unsuccessful update. The phone should be disconnected from the USB.
In the pop-up window, enter the model name in capital letters LGD325 and the serial number in capital letters as well. The serial number can be viewed either on the box or under the phone battery.
5) Next, a new window will start with the status bar in percent. After 15%, she will ask you to connect your phone. A new pop-up window will appear with connect and cancel buttons. Without touching this window, we connect the phone with a green screen to the USB, hold down the shutdown button until the phone goes into reboot, immediately after that you have to press the + volume button. You are in download mode. Firmware Update, arrows and status indicator should appear on the phone. Wait a couple of minutes for Windows to install the drivers. You can click the connect button in the pop-up window of the program.
6) If you did everything correctly, then the firmware download from the Internet should begin. Then the program will do everything by itself, and you will get the phone as if you just bought it and think a hundred times whether it is worth going to the service menu again)
7) after flashing my phone I got into the service menu of MiniOS 3.0, in order to exit it you need to click on the normal boot and confirm with the power button

original onhttp: //forum.xda-devel...d.php? t = 2590185 & page = 3

Post has been editedVladimirs77 - 28.04.16, 14:38

[kestua]

ALL REQUESTED
1. Install the driverLGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.10.1
2. run the programB2CAppSetup
3.When the phone is off, hold down the volume +
4.Connect to the computer in the program, click the update P.O.
Select the update P.O. or error recovery
firmware if you write that you have hundreds of the latest firmware. Choose a region.
5. the program immediately downloads the firmware to the folder with the program itself - the folder is hidden
During the firmware of the phone, the firmware can be dropped into another partition of the hard disk as after installation the firmware is removed
Flash Android LG with KDZ Updater
KDZ_Update

Firmware with KDZ Updater

Firmware-KOT491.A1401767730
V10C-CIS-XX

PHOTO INSTRUCTION

FACTORY DATA RESET

FOR FULL RESET Press the "vol-" volume button and the power button.
as soon as the LG logo appears for 1s. release the power button and press again

Backup firmware KOT491.A1392225267-V10C-CIS-XX

KOT491.A1392225267-V10C-CIS-XX

STOCK RECOVERY-abootstock.

Post has been editedkestua - 18.12.14, 18:53

Reason for editing: Screenshots under the spoiler

[kestua]

Backup firmware KOT491.A140101767730 and files for replacing and restoring recovery and boot

KOT491.A140101767730

A PHOTO

replacement of recovery and boot

files to throw in the root of the phone
adb shell
su
dd if = / sdcard / cwm_L70_V2.img of = / dev / block / mmcblk0p17
dd if = / sdcard / aboot.bin of = / dev / block / mmcblk0p6

return of stock recovery and boot

adb shell

su

dd if = / sdcard / stock.img of = / dev / block / mmcblk0p17

dd if = / sdcard / abootstock.bin of = / dev / block / mmcblk0p6

ROOT MANDATORY !!!!
All files in the archive.

Post has been editedEnlightened grandfather - 30.07.14, 10:51

Reason for editing: In the header

[kestua]

LGUnitedMobile Driver_S50MAN3 10AP22_ML_WHQL _Ver_3.10.1.ex e
Program for firmware-B2CAppSetup.ex e
KDZ_Update

Post has been editedkestua - 06.08.14, 14:24

[greysv]

[email protected], 21:28

The telephone number is not bad, but there are no kastums. Or still early

Let's all in place look for a suitable donor for custom.

[lirtm]

M

Transfer the instructions to this topic. Why leave them in discussions?

[VVXL]

Hacking bootloader, installing CWM

пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ CWM FAQ пїЅпїЅ ClockworkMod recovery (пїЅпїЅпїЅпїЅ #6348091) download

1. Breaking the bootloader

Do not forget to backup all the necessary data!
To check the health of the hacked boot, do the following:
Condition - the presence of rootLG L90 - Official firmware (OS 4.4) (Post # 31105547)andAdb.rar(215.43 KB)

Copy the hacked aboot.bin, in the folder with the ADBabootPatchedD325.zip(260.52 KB)

We connect the phone to the computer with a cable in charging only mode, open the command line, run ADB.
Next, enter the lines in succession, after each press enter:
Order of change of boot
1. adb shell
2. su (you can get a request for root-rights on the phone, do not forget to check and grant rights)
3. dd if = / dev / block / mmcblk0p6 of = / sdcard / abootstock.bin
4. exit
5. exit
6. adb pull /sdcard/abootstock.bin
7. adb push aboot.bin / sdcard /
8. adb shell
9. su (you can get a request for root-rights on the phone, do not forget to check and grant rights)
10. dd if = / sdcard / aboot.bin of = / dev / block / mmcblk0p6
11. exit
12. exit
13. adb reboot recovery

Return of stock through ADB

1. adb shell
2. su (you can get a request for root-rights on the phone, do not forget to check and grant rights)
3. dd if = / sdcard / abootstock.bin of = / dev / block / mmcblk0p6
4.exit

Authors Andrew-New and evoname

2. Installing CWM

Installation is done throughAdb

Flash recovery procedure

Download one of the recovery:
1. cwm_l70_v1.img(9.17 MB)

2. cwm_L70_V2.img(9.17 MB)
(in this version it is possible to enter using buttons)
and put it in the folder with ADB, then in the command line with ADB do:
1. adb shell
2. su (you can get a request for root-rights on the phone, do not forget to check and grant rights)
3. dd if = / dev / block / mmcblk0p17 of = / sdcard / stock.img
4. exit
5.exit
6. adb pull /sdcard/stock.img
7. adb push RECOVERY (here the name of the downloaded recovery) .img / sdcard /
8. adb shell
9. su (you can get a request for root-rights on the phone, do not forget to check and grant rights)
10. dd if = / sdcard / RECOVERY (here the name of the downloaded recovery) .img of = / dev / block / mmcblk0p17
11. exit
12. reboot recovery
Achtung! Carefully check the name of the block - it should be mmcblk0p17! Other blocks do not touch!

Return of stock recovery via ADB

1. adb shell
2. su (you can get a request for root-rights on the phone, do not forget to check and grant rights)
3. dd if = / sdcard / stock.img of = / dev / block / mmcblk0p17
4. exit
5. reboot recovery

CWM authorgreysvfor which he special thanks and plus in reputation

Enter recovery mode (Only possible in v.2)

Turn off or restart the phone.
Clamp the power and the button down when the LG splash screen appears, release the power button, do not release the volume down, and then hold it again and wait for the Factory Reset screen to appear. For all questions, confirm with the power button, the Recovery mode will start.

If everything goes well, you will load the stock recovery. From it you can already restart the phone and continue working.
If something went wrong (the chance for it thanks to evoname, kingart777 and payback is negligible), do not rush to disconnect the phone from the computer after the first reboot! There is a chance that it is still visible in ADB and the boot can be changed to stock.
If adb devices shows that the phone is available, then you can return everything to its place with the command in adb (after su) dd if = / sdcard / abootstock.bin of = / dev / block / mmcblk0p6
If adb devices does not see the phone, try giving the command fastboot devices. If it also doesn’t seem to - you can turn off the phone and try to restart it in every possible way, if after all the manipulations the phone does not load, we bring it to the service and say that they’re saying they’ve started the update, it loaded, it loaded, and then silence. On all questions we pretend to be rags or teapots, clever words are not spoken. You look - they will fix it under warranty.

P.S. ALL IS MADE AT YOUR OWN RISK !!! NO GUARANTEES NOBODY MAKES, GUARANTEES GIVE ONLY LG Electronics!
And I’ll add it myself: when creating a backup in CWM, I recommend creating it in the external sd section, otherwise the backup will be created in the internal memory of the phone, as a result of which there will be a lack of memory in the phone.
The instruction is written on the example of LG L90.Good luck!


Post has been editedGeneralgrant - 11.01.18, 22:56

[lirtm]

M

We move to the subsection LG.
Complete the header by removing the links to instructions from discussions and other topics, add all required instructions.

[Alex733ru]

People and that until now there is no easy way to get Ruth. In the cap, the way is too tainted, there is no desire to rant

[VVXL]

Software update options

OPTION 1.FOTA

This feature allows you to conveniently update the smartphone software to the new version "over the air", using the technology of Firmware Over-the-Air (FOTA) without connecting via USB cable.Read more

OPTION 2. WITH THE HELP OF THE COMPUTER

1. Install Windows USB DRIVERDownload
2. Download and install the LG MOBILE SUPPORT TOOLLGMobileSupportTool.exe(271.48 KB)

3. Connect your phone to PC using USB cable
4. Click "Start Update" in LG Mobile Support Tool

Has the smartphone software update stopped before full installation?
Do not close the software update window, unplug the cable and reconnect it. And check if the USB driver is working on your PC. After that, resume the software update.
Otherwise, please select “Additional features” - “Recovery from update error” in LG Mobile Support Tool. Then you can start restoring your phone.

(Material taken from off site LG)


Post has been editedGeneralgrant - 11.01.18, 22:46

[Arkan78]

Brothers! Help me deal with the problem - I run B2CAppSetup.ex e, writes something about an internet connection to check for updates and the "Continue" and "Cancel" buttons, nothing happens when I click on "Continue"! I've been fighting for the past hour and everything is empty, help revive the body!

[Arkan78]

Vladimirs77 @ 08/10/2014, 10:41

Try to choose a mode: Recovery after an error

So ... I would choose, but the program on the computer does not start! It offers to check the Internet connection and then silence.

[Alex733ru]

People such trabl. Put xposet naturally switched to dalwick. Now, after deleting, I cannot switch to the Art system

[Arkan78]

Vladimirs77 @ 08/10/2014, 11:20

Maybe the antivirus does not let? Try to reinstall the prog.

Now I will try to demolish the antivirus tries ..., the program I did not even try to install after launching the file immediately a small window with a warning about checking the Internet connection and that's it.
Did not help ! He took down the antivirus, turned off the firewall - the program is not installed, what am I doing wrong? You have already wiped your whole hairline before the holes, and the phone is still brick.

Post has been editedArkan78 - 10.08.14, 10:29

[VVXL]

Instructions for flashing an unlocked bootloader and installing CWM / TWRP without a computer

1.We need root rights. (Look in the topic header)
2.An unlocked bootloader must be flashed.
Instructions for flashing an unlocked bootloader without a PC

Here is our unlocked bootloader in the archiveabootPatchedD325.zip(260.52 KB)

Attention! You can not flash an unlocked bootloader from another phone model! Get 100% brick.

3.Flash CWM or TWRP with this program.[ROOT] Recovery + Tools + - + Flasher + v1.8.4.apk(1.82 MB)

cwm_L70_V2.img(9.17 MB)

To drainTWRP.img(9.58 MB)

For CM12.1twrp-2.8.7.0-20150821-w5.img(10.93 MB)

Program modified recovery TWRP or ClockworkMod. With this application, there is no longer a need to install via computer. With the help of Recovery Tools, you can install any alternative recovery from the file recovery.img, which should be located on the external flash card along the storage / external_SD path.

Screenshots

Tested on LG L70


Post has been editedGeneralgrant - 11.01.18, 22:54

Reason for editing: Added a link to the instructions for the firmware of a hacked bootloader without a PC

[greysv]

Alex733ru @ 08/10/2014, 10:50

Recovery is. And to sense it. Kastumov is not. There is nothing to sew

Do not you back up the firmware? And do not roll back when problemmah? And you can sew the stock through the CMP. Try to port something, I'll be a tester ;-)

[Algiraid180]

And why not start with aosp, cyangen, muyu and the same Yandex whale? Sorts for them, it remains only to find someone who compiles them and makes the kernel).

[Melnik_Arthur]

Vladimirs77 @ 08/11/2014, 02:55

Find a clone on our phone

This firmware comes out to bring animations to boot, but unfortunately now there is no time to do this, try to port who wantshttp: //forum.xda-devel...owthread.php? t = 2798015
By the way, I almost downloaded the source code of cyan, I will soon be exported with the assembly of cyan ..

[qaz13]

Why does not the adb see the body?

[greysv]

qaz13 @ 08/12/2014, 10:36

Why does not the adb see the body?

if 64 wines, then from the admin all the manipulations, even the installation of drivers.