Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
THEME IS CLOSED |
DNS AirTab P82w - Firmware |
Message#1 03.08.14, 19:18 | ||
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 498 Check in: 18.01.09 DNS S4502M Reputation: 56 | DNS AirTab P82w - Firmware maybe TF Synergy Tech Co. Model: TF-CQ878 Description |Discussion | Firmware Attention! Changing system files and installing non-official software you do at your own peril and risk, thereby assuming full responsibility for the possible consequences of your actions. Official firmware Custom firmware DNS_AirTab_P82w_rootfrom XNTPbIY (saythank) DNS_AirTab_P82w_ver.3Gbfrom valentin-63 (saythank) DNS_AirTab_P82w_GUBOdated 03.28.2013 from XNTPbIY (saythank) and serpavlov (saythank) AirTab_P82W Android 4.1.1 build number v1.05_20121205- Factory firmware with ROOT rights, in ZIP for firmware via CWM Firmware for DNS_AirTab_P82W_Propleks_v.1.0 RK30 Genio by Oma rocks - AOSP 4.2.2from _Danila_Master_ (saythank) RK30 Genio by Oma CM10.1 v1.3.5 and Odys Genio cRom v1.4 say thanks_Danila_Master_ ClockWorkMod recovery (Enter recovery) To standard recovery 3e When the tablet is turned off, hold down the "power" button and the "home" button (you can hold it for 5-10 seconds) - after about 20 seconds, a lying android will appear with an exclamation mark! Then, holding down the "power" button, press the + (volume) button 2-3 times at intervals of a second. In CWM 5.5.0.4 On the off tablet, hold down the "power" button and the "home" button (Installation) 1.Unpack 2. Enable RKAndroidTool.exe 3. Turn off the tablet and connect to computer 4. Press the power and home buttons, release when Found RKandroid is written in the program .... 5. Press Flash rom. 6. The tablet will boot into cwm CWM version 5.5.0.4_3gb downloadfrom valentin-63 (saythank) cwm6032VIT_P82W_2- "One-time recovery, starts from the SD card from the factory / stock recovery menu (stock recovery is not replaced). We saythankVVitaly Instructions CWM firmware method The device must have ClockWorkMod recovery installed. Create a full backup of the firmware (will help restore the system if something goes wrong). The battery must be 100% charged. Of course, the installation process itself will not spend that much energy, but it’s definitely not worth trying to install a new firmware with 15-20% charge. Disconnect the device from charging and computer. The archive to be installed is copied to the root of the memory card, NOT unzipping it. The file name must contain only numbers and Latin letters, spaces and special characters are not allowed. CWM allows you to install zip'y that are not only in the root of the memory card, but this method allows you to simplify the process of firmware. Log in to ClockWorkMod recovery. Do, wipe cache, wipe data! Sure to! Select "install zip from sdcard". Select "choose zip from sdcard". In the opened built-in file manager, select "DNS_AirTab_P82W_ofecail". In the list above there will be folders, below files. Confirm the installation by selecting "YES". The confirmation item is usually not the first one in the list, this is normal. After the installation is complete, select "+++++ Go Back +++++". Select "reboot system now", the tablet reboots. We are waiting for the full download of the phone. Downloading after installation can take a long time, especially if a new firmware has been installed. Installation method via RKBatchTool RKBatchTool_1.5 + driver RKBatchTool 2.0 Driver Firmware via RKBatchToolWe do everything according to the instructions, just hold down the "power" and "home" buttons Installing drivers for firmware on Win8.1 Instructions for scratching the device Dump the firmware We dump the firmware directly on the tablet Overclocking RK3066 Enable USB device support via hubs (USB-HUB) ROOT SuperSU v1.51.zip- install via CWM (saythank_Danila_Master_ An example of a post with firmware If you have a desire to share the firmware (yours or found), then please follow the following design standard, for unification and our convenience. Firmware name (use any readable Colour) Description: version, list of changes Installation: installation instructions (if there is a lot of text, then we hide it under the spoiler) Screenshots Download (link to download): the name of the firmware hyperlink (direct link to download) Cap updates 11/16/2014 - Added, CWM6032Vit_p82w_2.zh.p in ClockWork, Mod recovery 10/16/2014 - Added "Odys Genio cRom v1.4" from _Danila_Master_ to Custom firmware " 10/16/2014 - Added "RK30 Genio by Oma CM10.1 v1.3.5" from _Danila_Master_ to "Custom firmware" September 10, 2014 - Added instructions for splitting the device, "Making a firmware dump", "Making a firmware dump directly on the tablet", "Overclocking RK3066" in the "Instructions" 09/08/2014 - Added "Installing drivers for firmware on Win8.1" in the "Instructions" 09/06/2014 - Added CWM version 5.5.0.4_3Gb from valentin-63 "ClocWorkMod recovery" 09/06/2014 - CWM version 5.5.0.4 from bakugan645 is added to "WorkMod recovery" 09/06/2014 - Added Installation Method via RKBatchTool in the "Instructions" 09/04/2914 - DNS_AirTab_P82w_root firmware from XNTPbIY has been added to "Custom firmware" 09/04/2014 - added DNS_AirTab_P82w_ver.3Gb firmware from valentin-63 to "Custom firmware" 09/04/2014 - added DNS_AirTab_P82w_GUBO firmware from XNTPbIY and serpavlov to Custom firmware " 08/31/2014 - RK30 Genio by Oma rocks firmware - AOSP 4.2.2 from _Danila_Master_ has been added to "Custom firmware" 08/29/2014 - added a link to the description 08/14/2014 - DNS_AirTab_P82W_Propleks_v.1.0 firmware has been added to the "Custom firmware" 08/14/2014 - Added cwm6032ViT_P82w to "ClockWorkMod recovery" 07/14/2014 - Added a way to get root from _Danila_Master_ in "ROOT" Post has been editedpropleks - 29.12.15, 20:07 Reason for editing: Added CWM6032VIT_P82W_2 to ClockWorkMod | |
Message#22 11.09.14, 10:03 | |
Old resident [offline] Group: Banned Messages 848 Check in: 14.03.12 Lenovo S850 Reputation: 73 | Is it possible to overclock the core on the oma 4.2 core? -------------------- Cm12.1 love |
Message#23 11.09.14, 13:45 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 498 Check in: 18.01.09 DNS S4502M Reputation: 56 | |
Message#24 11.09.14, 13:54 | |
Old resident [offline] Group: Banned Messages 848 Check in: 14.03.12 Lenovo S850 Reputation: 73 | This is gpu, and I need cpu. By the way, has anyone figured out how to overclock gpu? -------------------- Cm12.1 love |
Message#25 11.09.14, 18:33 | |
[offline] Group: Friendssavagemessiahzine.com Messages 4676 Check in: 09.12.12 Reputation: 780 | already wrote something in the drug, but again,core- thiskernel, but notsystem image / partition (system.img / SYSTEM)And we send the kernel a stock one, accordingly, no matter what kind of firmware to experiment with the already modified kernel.you are mistaken, there is a script for changing the frequencies of both CPU (up to 1608 MHz) and GPU (up to 600 MHz) piece of code that is looking for # CPU frequency cap search list 22 my @cpu_cap_search_list = ( 23 [252000000, 1200000000], 24 [252000000, 1272000000], 25 [252000000, 1416000000], 26 [252000000, 1608000000], 27 ); 28 29 # CPU frequency cap replacement 30 my @cpu_cap_replace = (252000000, 1608000000); 31 32 33 # GPU frequency cap search list 34 my @gpu_cap_search_list = ( 35 [133000000, 266000000], 36 [133000000, 400000000], 37 [133000000, 466000000], 38 [133000000, 500000000], 39 [133000000, 533000000], 40 [133000000, 600000000], 41 ); 42 43 # GPU frequency cap replacement 44 my @gpu_cap_replace = (133000000, 600000000); -------------------- |
Message#26 16.09.14, 23:41 | |
[offline] Group: Friendssavagemessiahzine.com Messages 4676 Check in: 09.12.12 Reputation: 780 | on the tablet DNS Airtab P82W (* a new version) Installation Instructions First, carefully read the instructions completely, prepare everything you need, includingstock firmware, only after that proceed to the process of firmware. 1. Download the buildOdys Genio cRom v1.3.5(* orOdys Genio cRom v1.4) and related patches: - format_NAND_fix- formatting internal memory - mount extSD to NAND- external SD card, as the main application - mount intSD to NAND- internal SD card, as the main application - Tabletui (* for version 1.4) - status bar (clock, battery) at the bottom, as in the tablets - Phabletui (* for version 1.4) - status bar (clock, battery) at the top, as in the phones - sensor fix 7- fix accelerometer rotation 2. Download additional files to properly flash our tablet: - parameter file (corrected for P82W addressing with increased internal disk to 3.94 instead of 2.46)parameter_p82w.rar(1015 bytes) - stock kernel 3.0.8+DNS_AirTab_P82W_kernel_3.0.8.rar(2.65 MB) - loader from stock firmware v1.18 to avoid problems with firmwareRK30xxLoader (L) _V1.18.rar(177.96 KB) 3. Make backup copies of the configuration and firmware of your tablet, if you later want to return to the original state (I will not explain how. I need to find them on the forum) 4. Copy the downloaded patches to an external SD card 5. Unpack the archiveCrewRKTablets_RK30_Genio by Oma_CM10.1_v1.x.x.7z(depending on which version you downloaded and want to install), for example inD: \ AOSP 6. Unpack archivesparameter_p82w.rar, DNS_AirTab_P82W_kernel_3.0.8.rar, RK30xxLoader (L) _V1.18.rarat\ AOSP \ rockdev \ 7. Run\ AOSP \ RKDevelopTool_v1.35 \ RKAndroidTool.execheck that the checkboxes are everywhere except the lastbackup 8. Loader- choose our unpacked earlier\ AOSP \ rockdev \ RK30xxLoader (L) _V1.18.bin 9. parameter- choose our unpacked earlier\ AOSP \ rockdev \ parameter_p82w 10. kernel - choose our unpacked earlier\ AOSP \ rockdev \ kernel.img 11. Insert the USB cable into the computer. Turn off the tablet. Clamp the Home key on the tablet and stick the cable into the tablet. The computer will determine the tablet asRK30 Device. If not, put the driver from the folder\ AOSP \ Driver \(or looking for a forum). The program should appearFound RKAndroid... 12. ClickErase IDBand wait for the end of cleaningNAND FLASH(in no case do not pull out the cable, otherwise dancing with a tambourine around a brick) 13. ClickRUNAnd we are waiting for the end of the firmware and testing (in no case do not pull out the cable, otherwise dancing with a tambourine around the brick) (In case of unsuccessful download, in no case do not pull out the cable, so as not to lose the connection between the tablet and the computer. Again we try to execute the item12and13. If not, closeRKAndroidTooland open\ Tool v.1.5 \ RKBatchTool.exefrom the previously downloaded and unpacked archive with stock firmware (P82w_2012.12.5.zip) and stitch it, so as not to make a brick out of your tablet.) Well, if everything went well, the tablet should fall out in Recovery, in which: 1. We doVipe Data, Cache, Dalvic Cache 2. Put the patches:format_NAND_fix, sensor fix 7(the rest - at will) 3. Exit recovery and wait for download (the first time is long) 4. Rejoice To vskidku: + WiFi + Bluetooth + the screen behaves normally when flipped + The battery immediately shows the normal charge level (no need to fix it) - the accelerometer is deployed (setsensor fix 7for correction) ~ so that two more hidden items appear in the settingsFor developersandPerformancein the tabAbout tablet- several times we press onBuild number In connection with all the fixes that are posted on the page ... We put only those that clearly fix the flaws in the tablet. Test ... :) Post has been edited_Danila_Master_ - 27.12.14, 01:47 Reason for editing: added a link to the version 1.4 image, corrected the instruction ... -------------------- |
Message#27 17.09.14, 11:21 | |
[offline] Group: Friendssavagemessiahzine.com Messages 4676 Check in: 09.12.12 Reputation: 780 | About the firmwareKitkatfor rk30 ... It is unlikely that it will start, because Kernel there 3.0.36+ Of course, I will try for the sake of experiment, but there is absolutely no certainty ... :( -------------------- |
Message#28 17.09.14, 14:29 | |
Old resident [offline] Group: Banned Messages 848 Check in: 14.03.12 Lenovo S850 Reputation: 73 | I tried to set the kitkat as ohm (replaced all files) Does not work http://crewrktablets.arctablet.com/?p=538also works Post has been editedloza - 17.09.14, 17:21 -------------------- Cm12.1 love |
Message#29 17.09.14, 15:06 | |
[offline] Group: Friendssavagemessiahzine.com Messages 4676 Check in: 09.12.12 Reputation: 780 | [email protected], 16:00 -------------------- |
Message#30 17.09.14, 15:08 | |
Old resident [offline] Group: Banned Messages 848 Check in: 14.03.12 Lenovo S850 Reputation: 73 | 10 faster than 10.1 -------------------- Cm12.1 love |
Message#31 18.09.14, 23:04 | |
[offline] Group: Friendssavagemessiahzine.com Messages 4676 Check in: 09.12.12 Reputation: 780 | By the way, on AOSP, in contrast to CM 10.1 - it was impossible to connect the tablet to a computer in the mode of SD-drives (USB debugging is enabled). On the cyanogen immediately decided ... Yesterday I tied it to the tablet with a BT headsetSiemens HHB-750- it was defined and works without remarks. So far, only positive impressions of the firmware;) -------------------- |
Message#32 20.09.14, 02:19 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 732 Check in: 28.03.12 Explay sQuad 9.71 Reputation: 323 | By the way, did anyone figure out how to overclock gpu? It is necessary to try out Linuha, but not the fact that the kernel will work properly after the replacement. I have all 3 computers on Windows ... Maybe I will decide, someday, one "correctly" reinstall, for experiments ...;) I drove to rk3188 up to 384 (400) X 2 = 768. Other than this frequency will not work, all frequencies are multiples. You can see which are in the current kernel here / sys / mali400_utility / param Danila_Master! Question And how can I patch sensors.rk30board.soI need to give the accelerometer, where there is up - down: thank_you: -------------------- War is peace, freedom is slavery, ignorance is power |
Message#33 20.09.14, 04:33 | |
[offline] Group: Friendssavagemessiahzine.com Messages 4676 Check in: 09.12.12 Reputation: 780 | pmasel ATCM 10.1There are sensor fixes (7 options) - try them if the version / size / compatibility with the current firmware will not conflict ...: yes2: -------------------- |
Message#34 21.09.14, 16:50 | |
a guest [offline] Group: Users Messages 3 Check in: 25.07.14 Reputation: 0 | Good day, guys, please tell me how you can flash through the SD card, because it does not recognize it via the USB port, I have already tried all methods, but thank you in vain. |
Message#35 21.09.14, 17:01 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 498 Check in: 18.01.09 DNS S4502M Reputation: 56 | |
Message#36 22.09.14, 19:59 | |
a guest [offline] Group: Users Messages 3 Check in: 25.07.14 Reputation: 0 | Yes, the standard one, in nete, read about the CWM prog, that it needs to be installed on the tablet, I installed it, but after the prog it does not go into recovery, what should I do? |
Message#37 22.09.14, 21:49 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 498 Check in: 18.01.09 DNS S4502M Reputation: 56 | FIFTIMAX, I tried different methods of installing Cwm (via the terminal, various programs), but it turned out only with the help of RkandroidTool (described in the topic header) and for this you need a computer and a working usb (which you have failed). Therefore, it remains to wait for either the working version of the one-time cwm (link thrown in Qms), or to repair the connector , Post has been editedpropleks - 22.09.14, 21:50 -------------------- Homo proponit, sed Deus disponit |
Message#38 25.09.14, 18:14 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 498 Check in: 18.01.09 DNS S4502M Reputation: 56 | Good day, members of the forum. In order to bring one-time cwm to mind, a standard recovery log is needed. Need adb access to the tablet when it is in recovery mode. And copy the recovery log file (usually located in the tmp directory) to the computer and is called recovery.log. Well, put it here. Who will take? Attached files recovery.log(5.27 KB) miui_recovery.log(4.2 KB) Post has been editedpropleks - 18.11.14, 08:45 -------------------- Homo proponit, sed Deus disponit |
Message#39 08.10.14, 14:19 | |
Old resident [offline] Group: Banned Messages 848 Check in: 14.03.12 Lenovo S850 Reputation: 73 | Something quiet -------------------- Cm12.1 love |
Message#40 08.10.14, 15:59 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 498 Check in: 18.01.09 DNS S4502M Reputation: 56 | |
Message#41 08.10.14, 17:11 | |
[offline] Group: Friendssavagemessiahzine.com Messages 4676 Check in: 09.12.12 Reputation: 780 | propleks,launched my tablet ... Transferred to discussions Post has been edited_Danila_Master_ - 08.10.14, 19:39 -------------------- |
mobile version | Now: 05/19/19, 18:54 |