[X]Assistant

[fxspawn]

Rear View Mirror Recorder 6000B Car DVR WIFI GPS Navigation

Before flashing,read me

Those. data

• Chipset - Allwinner A10
  
• Display - 4.3 LCD
  
• Sensor - 3M CMOS Sensor
  
• Color - Black
  
• Lens Angle - Front Camera 140 degree Rear Camera 120 degree
  
• Decode Format - H.264
  
• Video Resolution - 1920 * 1080P / 720P / VGA
  
• Video Format - MP4
  
• Photo Resolution - 1M / 2M / 3M / 5M
  
• Photo Format - JPG
  
• G-Sensor - YES
  
• Loop-cycle recording - Off / 1min / 2min / 5min / 10min
  
• White balance - Auto // Fluorescent / Tungsten / Cloudy / Sunny
  
• Exposure - -3 / -2 / -1 / 0/1/2/3
  
• Frequency - 50HZ / 60HZ
  
• Time watermark - YES
  
• PIP - OFF / ON
  
• Restore the factory sett - YES
  
• IR night vision - YES
  
• Language - English / French / Espanol / Portuguese /
  
• Deutsh / Russian / Italian / Simplified Chinese / Traditional Chinese / Japanese / and so on
  
• Motion Detection - OFF / ON
  
• Formatting - Cancel / sure
  
• Screen saver - Off / 1min / 2min / 5min / 10min / 30min / close
  
• Auto-Power On - YES
  
• Delay Shutdown - 10sec / 30sec / 1min / 5min
  
• Microphone / Speaker - YES
  
• Storage Expansion - Bulit-in 8GB, TF Card, up to 32G
  
• Battery - 3.7V / 500mAH Battery
  
• Product weight - 320g
  
• Package weight - 750g
  
• Product size (LxWxH) - 30.5 * 9 * 3cm
  
• Package size (LxWxH) - 35.3 * 10 * 8cm

Equipment

1. 1 x 6000B Car DVR Recorder
   
2. 1 x Car Charger
   
3. 1 x Rear View Camera
   
4. 1 x USB Cable
   
5. 1 x User Manual
   
6. 1 x GPS module

Promotional photos

My photos

Recorder Video

Download:
rain -https://yadi.sk/i/Ghq21vnNanKtY
day -https://yadi.sk/i/Wjd_w6G0anMjq
evening (parking with lighting) -https://yadi.sk/i/cGAiCtEVbhUwe
evening - wiped up, no new ones yet

Root instructions

Instructions borrowedfrom hereparagraph:How to get root rights for AllWinner A10 and A13 devices

1. Install USB driver for your device (see point: Drivers for AllWinner A10 and A13) before using Unlock Root.
2. InstallUnlock Root Pro v4.1.2.
3. Enable USB in debug mode on your device. You can do this by going to Settings.>Application Development>on your device.
4. Connect the device to the computer using a USB cable.
5. Click the "ROOT" button.
6. Select a device from the autodetect device list.
7. Routing has begun.
8. Wait until the rutting process is complete, after which you will be informed by a message, in the lower left corner the device is successfully rooted and prompts you to install the Battery Saver application.
9. After the rutting process, simply reboot the device for the changes to take effect.
10. You can check whether you have administrator access by searching for the application on the Superuser device or installing an application that requires root privileges.

Drivers, firmware, root

Information from joker7864
Rearview Mirror with Recorder (Post # 34475621)
Firmware

Cap from joker7864

Let it be for now

Push

The price of the issue of this unit fluctuates around $ 125
What I wanted to get:
Large rear-view mirror;
Built-in DVR.
What happened
Large rear-view mirror;
Built-in DVR;
Rear View Camera;
Android 4.0.4; *
Navigator. **
* Android android, but: a bunch of Chinese software (as usual), some kind of Chinese market, where everything is in Chinese, and no play marketa;
** Accordingly, the nafigator in Chinese, for the Chinese
Shl. all these are system applications

Fortunately, the instruction on rutting allwiner A10 / A13 came up and for this device, the root was received by gentlemen-comrades :)
At my own risk and risk, in principle, as I usually did with any Chinese, I cleaned everything nafig (almost everything, the Japanese clave could not be overcome yet). Why at your own peril and risk, because there is no backup and how to do it normally is not clear. The Chinese brothers do not give a link to the firmware yet, I'm waiting.
Now about the pros:
- A large "anti-dazzle" mirror (not for every car will do, the visors will interfere, I have a grand starks, everything is gorgeous);
- Now a full android with the market;
- Rear view camera (in fact did not test the quality, plus the fact that it is);
- Video recorder;
- Navigator (installed while Yandex, for some reason does not merge cards, swears into place, although transferred to external memory where the place is full);
- Wi-FI;
- video processor mali 400;
- responsive and smooth touch (Pts pleased).

Maybe I forgot - add ...
Now about the minuses (unfortunately there are at least a few pluses):
- Mirror, it is not clear when I hold in my hands and look at it, everything is fine, when it hangs in the car, it puts a lot of pressure on my eyes, as if the 3D effect is something that is not clear, I will continue to test my eye and the mirror;
- Battery - clean fake,holds 15-20 minutes maximumI correct, 10-15 minutes (no more);
- Video recorder is a camera, the angle of rotation is limited, I have been looking for the golden mean for a long time, that it would be normal to see in the mirror and normally take off the road (more than the right side captures 45/55 as a percentage, not critical in principle, because the whole is visible)
- Night shooting: it has not yet been tested on cars, but infrared light bulbs do not work on this camera. As I checked: in the evening in a dark room, I turned on the IR on the device, and on the laptop I turned on the camera to see if the lamps were on or not (the lamps react to on / off), but they don’t react to the camera itself, the picture does not it doesn’t change at all, but nichrome is not visible if sent to a dark area. Where the light falls, it seems to be normal (lamp on and off, the picture is the same) ... Well, accordingly, the quality of daytime shooting is not ice, in principle, what was expected from the Chinese;
- GPS lives its own life, stable, but its own, I was stunned when I saw that Yandex nafigator showed me a speed of 140 km / h in the city, I immediately looked at the speedometer, I was so scared that I dispersed it, there were only 70 there. spoiled with different software, with different settings, anyway, he writes almost the speed is 2 times higher from the real one (on the speedometer);
- Allwinner A10 processor: single-core gigahertz (in principle, it copes with its tasks).


Conclusion:
Antutu showed 5 tysh with a penny. CPU-Z showed the screen size below the stated one, the standard launcher in the furnace, selects free space on the screen, set NOVA and removed all panels (here they are definitely not needed) left 3 desktops instead of 5 (extra) - screens will be later.
In general, the device is satisfied, not at all 100, of course, but it is satisfied, because of all its shortcomings, the price is most likely overestimated, according to my assumptions, by 30-35 dollars, but since the device is new, this is understandable.

The theme was created for all those who purchased this device, and faced with problems of various kinds, so let's share experiences, links, etc. At least two people will already be grateful for the firmware for this miracle of technology.

I create the topic for the first time, do not kick too much, but simply point out the shortcomings, I will correct

There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).

Post has been editedfxspawn - 26.04.16, 00:31

Reason for editing: changed header, warning

[ciberworm]

first began to remove all unnecessary
On parking, demolished the launcher installed another stopped the registrar automatically starting
Then I patched it with firmware and began to restore backup to data, everything hung and that's the result

[joker7864]

I also deleted all unnecessary and deleted the launcher. I suffered for a long time, but I had a normal reflash.
I am talking to the seller to send the firmware, so he writes every crap ... (I wrote for the first time when it hung on me when I downloaded it. I wrote in reply:

NOW If your device is still 6000B device still reboots ...?
Can you answer me this question?
--- Or: Maybe it’s because of the (car charger problem)? or because (battery problem)? Or is it (Not Enough) after the long way shipping? ! You can switch it on? Can it have power to turn on?
please do the following step: 1) Please press the reset key when it is a car connection? did it turn on or not? 2) TF / SD Card Called (C4 / C6 / C10) to try again, OK? If you’re trying to make it out of the box, you can’t get it.

Or My Dear friend: 1) If your car dvr doesn’t work correctly, it will be a HALT and dont respond to any buttons! only hard reboot (detach battery). 2) or try this solution: Please make sure that the DVR is in the menu and has a formatted memory card (format without TF / SD Card). When you plug in TF / SD Card and format it via menu. When you configure all setiings what you need. When you turn device off. It was a power on automaticly and starting recording. Seems to be no problem. please test it today, ok? because it’s good. Battery charging device without battery charger!

Or: You can working! 12-5V Maybe can working!

Posted on 09/03/2014 11:36:

I don’t know how to "force" him ...

[ciberworm]

Well, sort of off the ground, I moved it
firmware went

[joker7864]

Ciberworm @ 09/03/2014, 11:55

Well, sort of off the ground, I moved it
firmware went

I have the impression that everyone who bought it was ruined and reflashed;)
who would write custom firmware to it, removing all Chinese and setting up the GPS ///

[ciberworm]

I agree

[ciberworm]

need to make a full backup of this instruction


1. Download the program by reference Gentoo_SD_for_ a13_v.1.2.rar

2. Unpack the archive in a new folder.

3. Install the WinImage program from the folder

4. Prepare a clean microSD card (preferably 4gb)

5. We open the WinImage program from the rights of the Administrator.

6. Go to the Disk tab - click "Burn image to hard disk"

5. In the window that appears, select our Card Reader

6. Select file to write:

At the very bottom click in the file type "All files"
Open the folder with the unpacked files.
Select the file gentoofs.img
7. In the new window will be asked to erase, flash media click "YES"

8. Patiently waiting for the completion of the recording process.

9. Open - My computer - Find our media - Open.

10. We check all the files as in the photo, on our flash drive -

Picture

11. We take out the SD card - insert it into the tablet! We turn on - we wait for data loading from the carrier. On a black background - our sections nanda should be highlighted (a.b.c.d.e.g - approximately)!

12. If yes, everything is fine, Remove the SD card from the tablet and stick it into the card reader. And rename from backup.tag_ to backup.tag (without -).

We take out the SD card and insert it into the tablet. (Continued in paragraph 13).

13. If our partitions do not appear - then the tablet internally blocks (checking and collecting) data through a program recorded on the SD card. Recover will not work! Alas.

14. (Continuation of point 11) - We launch the tablet and wait for the execution of the removal - dump from the tablet on our SD card. Patiently waiting - as the dump is removed, a pink inscription appears "#localhost"

15. Everything we took Dump from the tablet - we have an images folder on the SD card. In our our dump.

16. To restore the tablet, see the item Recovering firmware on tablets with an Alwinner A13 processor.

Post has been editedciberworm - 03.09.14, 13:39

[ciberworm]

Well, sort of restored
but for some reason it does not show the screen
although all other functions work fine

[joker7864]

Ciberworm @ 09/04/2014, 09:30

Well, sort of restored
but for some reason it does not show the screen
although all other functions work fine

How did you determine that the remaining functions work if the screen does not show ???????

Post has been editedjoker7864 - 04.09.14, 09:33

[ciberworm]

Tach when pressed silk
Adb when trying to take a screenshot removes and there you can see the activity

Posted on 09/04/2014 10:24:

it remains to win the screen and everything will be fine

[yozha]

I bought this crap, too, on sale and already managed to break. I deleted the standard recording program that starts when it is turned on, now after loading the device it gives "an error occurred in the launcher application" and you can click "ok" an infinite number of times) I can only open the properties of the panel that allows you to turn on Wi-Fi brightness and so on. During the experiment, when I was looking for the combination Hard Rezet found, if you hold down the volume button "-" when the power is connected, the device is loaded into Tipo "Safe Mode". Unfortunately, except for the inscription in the left corner "Safe Mode" I did not notice any other differences in the download, the error still pops up.
Such a question, but if I install the firmware above on the topic, I am guaranteed a black screen or is there someone who has normally restored its performance. And then right now I have a semi-brick.

[joker7864]

I restored completely, there will be questions to ask
ciberwormIt seems to me that you need to reflash again;)

[ciberworm]

Well, you can try
it won't be any worse

[yozha]

joker7864,But what about the problem with the screen resolution? Is everything displayed normally?

[joker7864]

At first I didn’t read the instructions very carefully and when copying the file "data" to the USB flash drive, my flash drive turned out to be empty. I fought with this for a long time. And then it came to copy separately all the files except "data", I registered everything in adb, then I took out the flash drive, copied "data" and everything went. I use and enjoy ...

Posted on 09/04/2014, 12:37:

yozha @ 09/04/2014, 12:26

joker7864,But what about the problem with the screen resolution? Is everything displayed normally?

It is stitched when with firmware - no, it is not of this screen, but after backup everything is normal

[ciberworm]

did not help

Posted on 09/04/2014 12:45:

After the first firmware, the screen showed me now refuses to go away \

[joker7864]

I have after the first firmware screen showed now refuses to go away \

And when the first firmware goes on the screen is lit as it should be?

[ciberworm]

no signs of life at all

[joker7864]

Do you have to charge at this moment? I had a glitch when I flashed it - when charging was over ... can I try to charge a better one? Reset to make a button (needle) then reflash again? It helped me then ...

Post has been editedjoker7864 - 04.09.14, 13:48

[ciberworm]

I connected to the computer and the firmware I led through Livesuite

[joker7864]

I went through PhoenixCard.exe with this instruction.https://yadi.sk/i/x-VozUwJYSqoC