Mr-ex @ 03/05/19, 09:19
You asked, I answered, if you want to do it or not, I shared my experience solving the problem.
sewer87 @ 03/04/19, 21:37
And there can be no defocusing of speech between cameras, they perform different functions
For the sake of interest, read reviews on Chinese modules. There, everyone writes that he has only the main camera working (without the add-on module), and some write that they had to throw up the original additional camera to the main Chinese one. It even works that way ... Besides, I did not say that I was going to disassemble the module. I just took a whole original boo module from two cameras on a piece of iron.
mr-ex @ 03/04/19, 21:23
change battery from m9
If the original was new - would change. And to take ketayschen not yet decided. The battery is still quite awake after calibration.
mr-ex @ 03/04/19, 21:23
glue a piece of tape on the edge of the camera
sewer87 @ 03/04/19, 21:37
There the autofocus module is physically shot down.
In this situation, I agree with
mr-ex , at least partially. In nete really have information on repairing the camera. Papers, glue, tape, wire. The problem (judging by the materials that I read) in the wear of the lens mount. If its movement, or rather, side-to-side chattering, is somehow limited, then the module starts working in the same way as before. And including working and focusing. But this method (if you do not make mistakes, but more seriously) requires more time and perseverance than when disassembling the apparatus itself.