DiscussionBliss Pad R9733
Bliss Pad R9733
Discussion пїЅ | Firmware пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
  
• To discuss and search for third-party programs / games, use the following sections: Programs and Games .
  
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison .
  
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
  
• The results of performance tests of Android devices, see the topic: Benchmark
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.


Post has been editedRaveboy - 24.08.16, 23:02

Can anyone help where to dig? When you turn on the bluetooth, the tablet goes into constant reboot

I managed to achieve more: when the bluetooth was turned on, the tablet began to go into reboot. In my head immediately a bunch of different dirty thoughts, but nothing, I began to dig further. adb logcat showed nothing useful. I started reading forums, I read a bunch of nonsense, about removing the stock music application (which I did almost immediately) - someone helped return the apk back to the system, but I refused to believe in this problem for myself, because everything worked a couple of hours ago.

The solution was simple: reset the bluetooth settings. And for this you just need to completely delete the entire contents of the directory / data / misc / bluetoothd /

./adb shell
rm -r / data / misc / bluetoothd / *

Just in case, reboot, I turn on the tooth - everything works.

Hello!

Today I plan to buy such a tablet for my daughter as a gift, for games, reading books, music.
Can someone advise a normal firewall for android 4.1?

Will there be an upgrade to 4.2

Add to header: Firmware

32 & 64 drivers32 & 64 drivers
Flasher (Flasher)Flasher for R9733
Stock firmwareStock firmware R9733
Instructions on firmwareInstructions on firmware

I will create a firmware section.

Post has been editedbus1999 - 26.08.14, 20:11

HereBliss Pad R9733 - Official firmware

SW Forum users. Problem, help. From the market, applications are put in the internal memory and I can not transfer my flash drive to the internal drive. How would it be?

all firmware + drivers for VIN8 on off site

Friends' I would like to see detailed reviews about this tablet .. Is it worth taking at all?

Do not judge strictly, but here's the question: they asked me to reflash. Bliss pad r 972. But I can’t find at least something about this work of China, help any info ...

I can’t connect this tablet to the computer for firmware. Did according to the instructions above. Maybe there are other ways?

Flame01,
Turn off, hold down both volume keys, connect to a computer, install drivers from the firmware folder
Run the firmware program, as the device finds, select the firmware file - and in front ...

I summarize
Works IPS, 3G really is, but I did not test speed. It does not slow down at work
USB not charging, only on the charging connector (edit the header)
Spontaneous system reboots, patterns are not revealed. I suspect 2 reasons
1 processor power shortage
2 raw wasps
Antutu scored 18000
FHD pulls hard, HD no problem
(For some reason, FHD and HD normally play on H / W, but on S / W there are terrible brakes, although it should be the other way around)
CPU Frequency 252-1400 x2
Video mali 400 single nuclear
If the charging is turned off and connected, it is not possible to turn on
It takes a long time to load (turn on)
I did not find how to disassemble (make it charge from yusb)
OTG gives max 100mA (only flash drives and mice, by the way both work, through the hub does not work)
Games pulls moderate gravity is quite normal
Opening hours are approximate Video-4, office-6, waiting 2 days. charging 6-7
Small brightness adjustment range
A light sensor is declared, in fact it is not (it may just not be soldered)
GPS is dull but works
Cameras for show, max quality at 0.3mp

I recommend for Video and Internet

Post has been editedsadangel2 - 04.12.14, 12:19

I would like to add, I bought this device in October, in principle I was completely satisfied, there were memory problems and occasionally hung up. I installed the firmware from the off site, they added memory from 500MB to 2Gig, and with this firmware I stopped hanging, losing an excellent tablet for 5k rubles

How can I adjust the brightness? Interested in how to make it lower than permissible by regular methods. Through the root does not really help :(

Post has been editedAndrew dallas - 29.12.14, 10:43

See photo ..... 15% managed to reduce the brightness
Photo disassembly

Screenshots

By the way, on the system / bin path, delete the debuggerd file
after that I began to keep working longer and faster

Does everyone start to eat battery in standby mode after 20%? it's clearly not the battery
maybe 2.5 voltage with a minimum of 3.2 ..

Post has been editedsadangel2 - 02.01.15, 07:30

1. The picture is not clear, is this a trimming resistor that controls the illumination of the IPS matrix? Then another question: the case is just
on latches? I have a desire to replace the microphone with a more sensitive one.
2. In standby mode, evenly eats the battery. There was a glitch immediately after installing the new firmware, deleted the battery statistics file batterystats.bin, after everything was OK (although it is written that it has no relation to calibration).
3. Debuggerd is connected with USB debugging, IMHO, it's easier to disable it.

Post has been editedAndrew dallas - 02.01.15, 16:08

I have yes

There are two bolts under the plug, opening from the charging plug, and exactly along the seam with a leg

The microphone is sealed with a protective film of the screen, it is on the front panel against the plug, if something is not a problem with the replacement

Well, if only the question was asked -Tips to improve power saving devices on Android OS

If it's not difficult to measure the current consumption of the tablet, it turned out for me ..
Standby currentwith disabled wifi gsm and bt = 110 mA
(compared to my phone2sim + wifi + micro SD = 50mA in standby mode )
Idle current 1.3A in operation up to 2.5A
1.5A charge

Who can check the battery capacity? in nete there is no information on them ...