> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo S860 - Firmware



Rep: (1402)
Lenovo S860 - Firmware
PictureLenovo S860
Description | Discussion пїЅ | Purchase пїЅ | Lenovo S860 Owners Club пїЅ | Firmware пїЅ

Important information!

Drivers and Utilities
Special mode driver - smartphone mode firmware driver from PC:
Attached fileusb_driver_SW_Rom.rar(9.79 KB)

Attached fileDriver_Auto_Installer_v1.1236.00.rar(9.42 MB)

mt65xx_HTC_usb_driver

Utility for updating firmware from PC:
Attached fileS860_ROW_Flash_Tool_v3.1324.0.177.rar(11 MB)

Attached fileS860_ROW_Flash_Tool_v3.1324.0.177_PreloadUpdate.rar(5.5 MB)


Firmware
Official firmware
Russian RU / Multi (ROW)
4.2.2


4.4.2


Chinese EN / CN
4.4.2

  • S860_S907_VIBEUI_V1.5_1427_2_ST_300B:Ota
  • VIBEUI_V2.0_1429_4_DEV_S860_0C87:Ota
  • VIBEUI_V2.0_1434_ST_S860:Ota

Official Russian firmware (ROW) is installed on the Chinese version of the device, but the firmware of the radio module (modem) will need to be replaced.


Unofficial firmware
Based on official
MIUI V6-7-8 firmware
Pure Android based firmware
CyanogenMod and based on it
Others (LewaOS, ColorOS., Etc.
Outdated




Instructions
Firmware via SP Flash Tool
After firmware from PC use region code.
1 - Immediately after the firmware, open the dialer dialer and dial #### 682 #
2 - In the pop-up list, select the region RU or UA
3 - Confirm.
4 - the smartphone will reboot into the recovery and apply the region code
5 - After a full start, open the dialer and reset the settings by typing the code #### 7777 # or #### 8888 #
6 - The region of the code that did not make a choice is removed from the official guarantee upon delivery to the service with this firmware.

Installation instruction twrp on Chinese via flashtools
Installing firmware S860_VibeUi_2.0_1439_V2_Baralajbi
Install update (OTA update)
Getting Root rights without a PC
Opening Root rights and installing TWRP-recovery (for ROW 4.4.2)
Installing TWRP-recovery and opening Root rights (for ROW 4.4.2)
Stock recovery recovery
Installing an unsigned driver in Windows 8
Installing ROW firmware in Chinese
Update process at 401. (China) (for newbies)
Idle screen and sensors
Instructions for the restoration of the flew after the firmware IMEI


Modems

Patches / Files / Recovery

miscellanea
Twickers
VibeXpert - tweaker for VIBE.
Gravitybox- allows you to make a large number of changes to the system /
Engineering codes Lenovo S860
  • Advanced Developer Mode: #### 537999 #
  • View software version number: #### 0000 #
  • Factory Mode: #### 1111 #
  • SN serial number: #### 2222 #
  • Engineer Mode - recording and analyzing system logs: #### 3333 #
  • Factory Reset - reset all smartphone settings: #### 8888 #
  • IMEI / IMEI check: * # 06 #
  • Check the internal software version: #### 5993 #

Operator logos for MIUI v6
TWRP_Vortex_Framework_Animation_MOD_5.3_modded_by_eng.stk (system animation mode)
Mod operators logos (MTS and MegaFon)
Sound returns in custom
Solving some problems on Vibe 2.0
Solving the problem fastboot mode
Windows does not detect MTP device
Recover Secureit without flashing
SP Flash tool errors, how to configure gps in the firmware, how to remove the notification of the missing 2 sim card

Screenshots
Survey 1
Attached Image
Survey 2
Attached Image


There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been edited* Akella * - 26.09.18, 17:47
Reason for editing: dead link removed



Rep: (1066)
M
We move to subsectionLenovo .



Rep: (4)
Tell me, what is this unofficial firmware? Description about it where you can read?



Rep: (1402)
* amicalex
Custom, with which comes the body purchased from the Eternal Team.
At the heart of the Chinese firmware S860_S215_140126, 4.2.2, modem v12, put only flash from the kit and selecting userdata.
http: //lenovo-forums.r..s860-s860-s215-140126/



Post has been editedim190610 - 26.06.14, 11:37



Rep: (10)
Vroot on my device refused to work.



Rep: (5)
Question about rutting. I received Ruth with the help of Vroot Russified. Then he put SuperSU. And here SuperSU asks to install a binary, installation via CWM, when rebooting into the recovery it swears. After rebooting, everything is repeated in the settings I can not enter. Even with the "normal" replacement of the binary, the prog is minimized and everything is sailed ... And it’s impossible to remove the root from the Chinese brothers even if the system \ app binary is given read access to the entry.

P.S decided everything by simply replacing files in the system / app The device cursed but swallowed.

Post has been editedbozer - 26.06.14, 08:38



Rep: (3)
reading all the topics, he carried out his brain.
what is needed to change the firmware, preferably on points, because Where is the recommendation for removing NVRAM backup written? and how to remove it I can not understand. The first droid, before that used WM.



Rep: (1402)
* bozer
Lenovo S860 - Discussion (Post # 32264060)

* padre.vl,
http: //lenovo-forums.r..to install- backup -nvram/



Rep: (159)
Custom Chinese firmwareNobody tried to bet?



Rep: (1402)
* Ivel
Yes, I did. Hodgepodge, native launcher drunk, translation of main applications is missing.


Added a survey on the quality of communication.

Post has been editedim190610 - 28.06.14, 09:38



Rep: (1)
Installed TWRP 2.7 based on S209 ROW, this one:http: //lenovo-forums.r...novo-s860/#entry178065

When entering the recovery mode, I see 4-5 lines of Chinese characters;
How to russify?
Thank!



Rep: (1)
2Prime_on
I did the same on it, but I don’t remember which recovery.img I installed, or the one that was in the archive or fromhttp: //lenovo-forums.r...%D0%B8%D1%8F/? p = 161628. Renamed new_image.img ->recovery.img, but not a fact, try this

Post has been editediCorwin - 28.06.14, 22:22



Rep: (2)
iCorwin @ 06/28/2014, 10:20 PM*
When entering the recovery mode, I see 4-5 lines of Chinese characters;
How to russify?

show pics of hieroglyphs you see.



Rep: (1)
Levonli @ 06/29/2014, 08:54*
show pics of hieroglyphs you see.


Will not work. I again flashed to 4.4.




Rep: (159)
Got my Chinese. I flashed flashpoint 4.4.2 ROW. Ruth tried to get it with the help of VROOT, it seems to be received. I installed SuperSU, the Chinese root manager is not deleted and the binary is not updated. Reset, setTWRP 2.7(all other recovery does not work normally, although this also has problems) and the UPDATE-SuperSU-v1.94.zip patch from the same place. It seems to have gotten up normally, updating the binaries did not require it, but after reloading the binary it crashed and is not updated again. How to deal with it? If the normal recovery for the Chinese? Is a full-fledged custom based on Chinese 4.4.2 (core and core from Chinese + applications from ROW) planned?



Rep: (1)
Hello to all.
I can not flash the recovery. The device I have is Chinese, the firmware is a kitkat for a European. Does anyone have an adequate scatter file for firmware recovery? And that gives me an error 8038



Rep: (1)
Deni7ST @ 07/01/2014, 10:27*
Arnur, and the answer in the next forum where you wrote about the same problem a little earlier does not suit you? Have you tried to solve a problem in some way or are you waiting for when they decide and give you a ready-made solution?

Solved the problem by finding another recovery with a scatter in the kit. Now I'm testing different modems, but the 3G network does not work on one.



Rep: (2)
Now I'm testing different modems, but the 3G network does not work on one.

In which slot is a SIM card with 3g, in the left or right?



Rep: (0)
Hello. I bought this device Chinese. The raw s209 update arrived. Does the question make sense by air? Somewhere read lost Russian language. Or the best shaman with the euro prog + modem Chinese?



Rep: (16)
* shyrik974 How is it on the Chinese firmware flew row firmware? What firmware do you have installed?



Rep: (0)
Deni7ST @ 2.7.2014, 9:29*

* shyrik974 How is it on the Chinese firmware flew row firmware? What firmware do you have installed?

Firmware Row s116-14.04.05
Communication module row.v12, 2014.04.05
The first sim card is constantly falling off.
Wow, so my Russian firmware is worth it, and the 1GB operative is like a Chinese. The whole box and stickers in hieroglyphs, I took in a tyrnet store in Moscow.

Post has been editedshyrik974 - 02.07.14, 10:53


Full version    

Help     rules

Now: 06/29/19 10:28