Assistant
| REPLY |
 OnePlus One - Official firmware |
Message#1  23.06.14, 18:13 | |||||||
Come on thump! :)  [offline] Topics Curator Group: Curators Messages 7151 Check in: 17.07.09 Oneplus one Reputation:  3026  | OnePlus One - Official firmware  One, BaconDescription | Discussion � | Purchase � | Official firmware � | Unofficial firmware and custom kernels � | OnePlus One FAQ | OnePlus One Owners Club � | Accessories � | Modifications and decorations � | Connect and configure 4G (LTE) on smartphones � | Marriage and Repair � | Synthetics and consumption � Important
Drivers and Utilities ADB drivers YaDisk ADB drivers forWindows10 ( onPOISON. ) + another driver option forWin10with instructions for installing them UpdatedSdk slim onYaDisk Old sdk slim onYaDisk ColorOS driver YaDisk Drivers for OnePlus one (ADB / MTP) Instructions for manual installation of ADB drivers If the ADB does not see the device, this will help you.instruction. Solving the problem of the inability to flash through fastboot on Windows 8 / 8.1 / 10 Installing drivers on windows 8.1 x64 Various utilities (tulkits)
Recovery To change the contents of the / recovery partition, the bootloader must be unlocked (read the "Instructions" spoiler how to do it) Check that in the settings for developers there was a checkbox "Debug USB", and the checkbox "Update recovery mode" was removed + custom recovery setup If there is a custom recovery, then reset to the factory only in it. In the settings of the smartphone, resetting to factory settings will result in a constant reboot! Opinion on how to set custom recovery Custom Recovery Installer (TWRP / CWM option) So, you have two options: You can install TWRP (TeamWin FAQ (TWRP) ), but you can CWM ( ClockworkMod recovery (CWM) FAQ ), what's the difference, you can read here . Personally, I recommend TWRP, because to date, discontinued support by the developer CWM. For installationTWRP do the following: TWRP CWM CWM Installation Instructions One morebatch filefor easy CWM firmware fromOlezhek1975(you do not need to enable fastboot mode - it will reboot itself where and when it is necessary) Philz Touch recovery Firmware For convenience and reduce nerve waste: before installing any firmware or modification, make a preliminary backup in custom recovery (TWRP / CWM) partitions of what is now on the phone, namely / boot, / system, / EFS,/ data (data from this section can be backed up usingTitanium backupif there is root, or without root we useMybackup). Ways to install the firmware (pros and cons) Stable firmware Description of fastboot firmware files (what exactly each file is for) Cyanogen CyanogenOS 13.0 / 13.1 Firmware for fastboot Full versions of firmware for recovery Ota cm-13.1.1-ZNH2KAS3P0-bacon-ota cm-13.1.1-ZNH2KAS2X1-bacon-ota cm-13.0.1-ZNH2KAS254-bacon-ota with modifications cm-13.1-ZNH2KAS1KN-bacon-ota - Changes and how to set cm-13.0-ZNH0EAS2JK-bacon-ota Changes cm-13.0-ZNH0EAS26M-bacon-ota with installation instructions + Mirror on Ya.D. - What's new in firmware + small video review CyanogenOS 12 / 12.1 How to enable advanced settings on COS12.1 firmware (YOG4PAS3Jl) and higher Solution to display the full photo in the call on COS12.1 Changes COS12.1 (N0) + personal observation of changesandDetected bugs Firmware for fastboot cm-12.1-YOG7DAS2K1-bacon-signed-fastboot.zip Mirror on mega + Mirror on androidfilehost.com - note about the / userdata files cm-12.1-YOG4PAS3JL-bacon-signed-fastboot.zip Mirror on Ya.D. cm-12.1-YOG4PAS2QL-bacon-fastboot.zip cm-12.1-YOG4PAS1N0-bacon-signed-fastboot.zip(Updated buildhere Mirror onPOISON. MD5: 87DEDA2B72A33BBC8407A61172D8ED8A ( the differences )) cm-12.0-YNG1TAS2XK-fastboot cm-12.0-YNG1TAS2I3-bacon-signed-fastboot.zip Mirror on Ya.D. cm-12.0-YNG1TAS17L-bacon-fastboot.zip Mirror on Ya.D. Changes (changelog) cm-12.0-YNG1TAS0YL-bacon-signed-fastboot.zip Mirror on Ya.D. Full versions of firmware for recovery Custom recovery should be TWRP version 2.8.6.0 (modified for backup / EFS of the same version will also work) Error solutionE: Zip file is corrupt! E: Error installing zip file '@ / cache / recovery / block.map' in custom recovery " cm-12.1-YOG7DAS2K1-bacon-signed.zip Mirror on mega + Mirror on androidfilehost.com cm-12.1-YOG4PAS3JL-bacon-signed.zip Mirror on Ya.D. cm-12.1-YOG4PAS2QL-bacon.zip cm-12.1-YOG4PAS1N0-bacon-signed.zip(Updated buildhere Mirror onPOISON. MD5: 6AE2D0B0ABAE7E96981FF0C192E2F0F5 ( the differences )) cm-12.0-YNG1TAS2XK-bacon-signed cm-12.0-YNG1TAS2I3-bacon-signed.zip Mirror on Ya.D. cm-12.0-YNG1TAS17L-bacon-signed.zip Mirror on Ya.D. Changes (changelog) cm-12.0-YNG1TAS0YL-bacon-signed.zip Installation Instructions usingstock recovery + another one OTA updates Topic on the oneplus.net forum (there is an installation manual) cm-12.1-YOG7DAS2K1-bacon-OTA - How to install + changes cm-12.1-YOG4PAS3JL-bacon-OTA cm-12.1-YOG4PAS2QL-bacon-OTA 12.1-YOG4PAS1N0-OTA Links are working, but the same firmware is downloaded as in the spoiler above "Firmware for custom recovery" CyanogenMOD 11S Firmware for fastboot cm-11.0-XNPH05Q-bacon-signed-fastboot.zip + loader (kernel) for developers cm-11.0-XNPH44S-bacon-signed-fastboot.zip + loader (kernel) for developers cm-11.0-XNPH38R-bacon-signed-fastbootfor firmware via fastboot cm-11.0-XNPH33R-bacon-signed-fastboot cm-11.0-XNPH30O-bacon cm-11.0-XNPH25R-bacon-signed-fastboot.zip Yadisk cm-11.0-XNPH22Q-bacon-signed-fastboot.zip YaDisk What is a development loader (* -bacon-boot-debuggable.img) and what is it for? Full versions of firmware for recovery Stock Rooted XNPH05Q + XNPH05Q Radio, etc (link leads to xda) on Yandex.Disk for firmware from custom recovery Stock Rooted 4.4.4 XNPH44Sfor firmware from custom recovery Stock Rooted 4.4.4 XNPH38Rfor firmware from custom recovery cm-11.0-XNPH33R-bacon-signed cm-11.0-XNPH25R-bacon-signed.zip cm-11.0-XNPH22R-bacon-signed.zip OTA updates All OTA-updates arriving by air after downloading by the system are located in the / cache folder of the root directory (access there is possible only with root-rights) Install the "Install" item through the custom recovery, then select the downloaded update file * .zip (instead of the asterisk update version), or via the "adb sideload". cm-11.0-XNPH05Q-OTA cm-11.0-XNPH44S-OTA cm-11.0-XNPH38R-OTA OTA XNPH33R OTA XNPH30O  cm-bacon-XNPH25R_fix.zip(23.55 MB)Oxygen OS The official thread on the Oneplus.net forum How to install without losing data OxygenOS 2.1.4 + review and how to install + script to install from TWRP + firmware with fastboot OxygenOS 1.0.3 (Mirror|it's onGd MD5: e7dd73d70530d7fb554d8bfd07a793b0) with even better "Stagefright patches" (there are no more changes there, put the "Recovery" spoiler from TWRP) OxygenOS 1.0.2with closed"Hole Stagefright" in MMS (on Ya.D.) OxygenOS 1.0.1 with installation instructions OxygenOS 1.0.0 with new drivers from 02/06/15 Download Oxygen OS 1.0.0 (based on Android 5.0.2) fromtorrent oxygen_1.0.0_flashable.zip on Ya.D. Feedback on firmware + one more tip Useful tips Known bugs and flaws Oxygen OS(link leads to oneplus.net forum) ColorOS If you didn’t like this firmware, then to return to any other non-ColorOS firmware, you need to flash CM11S / COS12.x via fastbootall sections except userdata or install the full version of the firmware from the recovery followed by wipe factory reset. How to do it in the spoiler "Instructions"! The latest version of ColorOS 2.0 on Android 4.4.4 KitKat Color OS 2.0 Android 4.4- there is no Russian language, search for Russification in the subjectOnePlus One - Unofficial firmware, gapps set for Android 4.4.x Color OS V1.2.0- link leads to XDA forum Native recovery ColorOS(sometimes required to install ColorOS, install via TWRP or, after removing recovery.img from the archive, sew it through fastboot) A post where all ColorOS updates are collected, including beta releases- link leads to XDA forum Russification, root, gapps for ColorOS based on Android 4.4.x The latest ColorOS can be downloaded.here All versions of ColorOShere(for fast downloading I recommend installing the Download manager on the BB) ColorOS A0001ROM_12_OTA_016_all_R1300_wipe.zip on Ya.D. Pros and cons of ColorOS 2.0 [ROM] [OFFICIAL] [5.0] Android Lollipop Alpha(link leads to the oneplus.net forum,download from Yandex.Disk) - Languages: English / Chinese , no russian! After installation TWRP flies The version is still raw and not recommended for installation. This is not CM12, firmware is pure Android L 5.0. Screenshots Installation Tips Nightie CM, MultiROM, GAPPS for Android based firmware Nightie ( More irrelevant ) What is nightie ( Note that nightgowns can not go out every day - do not ask about this in the subject! ) Usually nighties spread in UTC ± 00: 00, that is, at 4 am Moscow time (count your time zone yourself), but this time is not a constant and can be laid out later, but they may not post it at all for a few days Download latest version (about the recovery, next to the firmware on the download page) CyanogenMod Nightlies -Mirror onPOISON. from hepolise Where to see if the nightie assembly is on (search by "bacon" through the search on the page ) Changes, defects The last nightie CM11, after which the development of CM12 begancm-11-20150105-NIGHTLY-bacon.ziponYandex.Disk About SNAPSHOT CM {ab} You can downloadhere How to turn a nightie CM {ab} into CM {ab}S / COS {ab} written in the topic header Modifications and decorations OnePlus One Incremental update of nightie usingCyanDelta Updater(the difference in the part of the changes made in each subsequent night version is downloaded,changes can be displayed forof alldevices for which there was another nightie. If after updating via CyanDelta Updater errors get out, then roll back to the previous version of the nightie or put the last one clean) Google apps Our Platform: ARM Google Apps FAQ Android N 7.x.x (CM14.1) Android M 6.x.x (CM13.0) Android L 5.x.x (CM12 / 12.1) OpenGAPPS OPEN GAPPS SLIM Gapps with @Calkulin Wakelock fix, CameraNext, MaxxAudio(link leads to XDA) -not of current interest PA-GOOGLE APPS Plus(link leads to XDA) [GAPPS] [5.0.x] [17/12] Weekly Updated | Added CM11s Apps | Medi & Mini Packages(link leads to XDA) BaNkS GAPPs Google Apps Minimal Edition for Android 5.0.x & 5.1 Android K 4.4.x (CM11) OpenGAPPS ®AntiGapps Script- a script to remove all services and Google applications BaNkS GAPPS MultiRom MultiROM - Modification for simultaneous installation of multiple firmware. The choice of firmware occurs through the menu when you turn on the phone. MultiROM kernel reviews . Dual (multi) Boot Patcher Instructions on how to install cos 13.1 and oxygen os 2.1.4 in Dual (multi) Boot Patcher Instructions on how to install CM12 via multi device with other firmware (if after such installation the smartphone restarts or does not load, then we read the instructions again or refuse to have the CM12 + smartphone with other firmware at the same time and install onlyonefirmware! ) Instructions how to put Multirom with OxygenOS support on a phone with COS12 / CM11S stock The solution to the problem, if the screen lock does not work normally, the sensor is approximated when crossing CM11 and CM12 A small FAQ on the use of stock firmware and ColorOS via MultiROM Firmware video reviews Modems (firmware-radio correct) About communication and firmware-radio selection This spoiler contains firmware-radio, which includes the emmc_appsboot.mbn, logo.bin, NON-HLOS.bin, rpm.mbn, sbl1.mbn, static_nvbk.bin, tz.mbn files, and not only NON-HLOS.bin (which is just the firmware of the communication module), because All of them in each firmware are interrelated and must be stitched together. Before any installation of the modem, it is recommended to make a preliminary EFS backup (as described in the spoiler. Instructions - EFS Backup. Important!) Modems with Android 4.4.x and 5.x.x are incompatible! When installing someone else's modem, there are problems with the proximity sensor. More modems and their test About the modem version (why they do not change in the menu "About phone") Solving the problem of falling off the network after talking to LTE OpCoSa Yota Moscow(It helps not all!) Another solution when rolling off LTE (do everything carefully and carefully! ) Kernels Before any installation of the custom kernel, we make backup of the / boot and / system sections in the custom recovery (when installing the custom kernel, the libraries can be updated), and we also read for which firmware the kernel data is intended (the kernels for CM11 and CM11S differ and even more so for CM12) core) Opinion is necessary or not a custom core and what problems may be Script to remove tails before installing the kernel Opinion about the need for this script and when it should be used What is the core and "what does it eat?" :) Kernel core In order to make an update to install the kernel from another firmware version, simply replace the boot.img file in the downloaded * .zip archive with the boot.img file from the firmware you need -picture instructions All stock coreshere Kernels for developershere What is a development loader (* -bacon-boot-debuggable.img) and what is it for? Custom kernels Located in the topic headerOnePlus One - Unofficial firmwareand their work is discussed there on any firmware, except for issues of energy saving and performance (for this there is a separate topic) Instructions Before following all the instructions, you should download and install the drivers and the Updated Slim SDK from the spoiler "Drivers and Utilities" Bootloader unlocking How to find out if the bootloader is unlocked or not? 0) Go to the menu "About phone" and tap several times on the build number to open the menu for developers. Next, open the developers menu in the settings and put there daws " USB debugging "and uncheck" Update Recovery Mode " 1) Turn off the phone. Then boot into fastboot mode. To do this, hold down the volume key up and the lock key. The screen should say "fastboot" or "fastboot mode" 2) Connect your phone and computer using a USB cable. 3) Open the command prompt as an administrator and copy there (or just in Windows open the ***** / android-sdk-windows / platform-tools folder>in free space of the Shift window + Right mouse button>"Open command window") and enter the following code from the command line: fastboot oem device-info If the line "device unlocked" says "true", then the bootloader is unlocked. Method number 1 After unlocking using this method, all data from the memory card will be deleted and the smartphone will reset to factory settings and user data will be deleted (sms, logs, user programs) , but if the bootloader has been previously unlocked and locked by mistake, the new data unlocking will not delete 0) Go to the menu "About phone" and tap several times on the build number to open the menu for developers. Next, open the developers menu in the settings and put there daws "USB debugging "and uncheck" Update Recovery Mode " 1) Turn off the phone. Then boot into fastboot mode. To do this, hold down the volume key up and the lock key. The screen should say "fastboot" or "fastboot mode" 2) Connect your phone and computer using a USB cable. 3) Open the command prompt as an administrator and copy there (or just in Windows open the ***** / android-sdk-windows / platform-tools folder>in free space of the Shift window + Right mouse button>"Open command window"): cd ***** / android-sdk-windows / platform-tools where ***** is the place where you unpacked the archive from the Android SDK (you can download it here:http://d-h.st/08wor in the spoiler "Drivers and Utilities") 4) Copy the following to the console (command line): fastboot devices This command will show the list of connected phones. If the serial number of your phone is highlighted, you can proceed to step 5. If not, you need to install the driver. 5)Attention! This will delete all data on the phone! Enter the following into the console: fastboot oem unlock 6) Copy to console: fastboot reboot Phone will reboot 7) Everything! Bootloader unlocked A source Method number 2 Hereeasier way without deleting data (instruction how to do it) On firmware, starting with XNPH30O, this unlock method may not work and should be unlocked according to Method 1 or 3 or try to make a downgrade to XNPH38R firmware (although it is impossible in principle without an unlocked bootloader)! On XDA there ismessageabout successful unlocking the bootloader on firmware 44S using a fileOnePlusOne-OnlyTamperBitToggle.zipfor installation from the recovery (read the instructions above how to do it). Method number 3 (no computer needed) If you have blocked the bootloader, and want to unlock it again Decision here . Backup EFS. Important! Need an unlocked bootloader! Method number 1 (TWRP) It is recommended to backup your EFS parameters. This will allow restoring such parameters as: IMEI, S / N, GPSID, WIFIMAC, BTMAC, etc. in case of their loss. Without these parameters, the phone turns into an almost useless thing. To do this, we do: 1. Install from anycustom recovery modified TWRP (from this message where you can always find the latest version) 1.a. Or through the fastboot flash the file recovery.img(14.76 MB)by team fastboot flash recovery recovery.img 2. To create a backup, we load into the recovery. 3. Next, click "Backup" and select the item "EFS". Next swipe right. Backup is ready. 4. Reboot into the system, then copy the backup from the TWRP folder and save it on any media (flash drive, PC, cloud, etc.). Fast Method number 2 (using the terminal on the BB / terminal emulator on the smartphone) 1. Making a backup. To do this, installterminal emulatoron a smartphone or connect a smartphone to a computer and in the terminal (cmd) we write: su We give root rights. dd if = / dev / block / mmcblk0p10 of = / sdcard / modemst1.bin bs = 512 dd if = / dev / block / mmcblk0p11 of = / sdcard / modemst2.bin bs = 512 After entering each line, press the "Enter" key on the keyboard and the message appears: 3072 + 0 record in 3072 + 0 record out 1572864 bytes transferred in 0.325 secs (4839581 bytes / sec) 2 modemst1.bin and modemst2.bin files will be created in the sdcard root. 2. Restore EFS Boot into the fastboot, open the console on the computer and write: fastboot flash modemst1 modemst1.bin fastboot flash modemst2 modemst2.bin Or on the smartphone in the terminal emulator we write: dd if = / sdcard / modemst1.bin of = / dev / block / mmcblk0p10 dd if = / sdcard / modemst2.bin of = / dev / block / mmcblk0p11 Fast Method number 3 (using the utility on the smartphone) Root rights - install / uninstall (need unlocked bootloader) This spoiler contains all the possible instructions for installing / removing root-rights. No more options! In CM - CyanogenMod (not to be confused with COS - Cyanogen OS) root is already built in and is included in Settings - For Developers. With any installation of root-rights from the spoilers below, all data in the phone is saved (bootloader must be unlocked, butwhen it is unlocked data is lost), including settings, programs and the contents of the memory card, but you do everything at your own peril and risk, so read firstQuestions beginner root user Method number 1 For CM13.a.b / CM14.a.b / COS13.a.b and above, the SuperSU installation method is describedhere ! And for firmware versions below CM13.0 / COS13.0 / 13.1, do the following: 1) Download the archive with SuperSu:SuperSU (Mirror on xda). 2) We throw it on the phone, without unpacking, at the root of the phone's memory. 3) boot intocustom recovery. How to do this is described in the spoiler "Installing custom recovery + stock recovery". 4) Click on Install, then select the archive with SuperSU. 5) Swipe to confirm the installation. Then click on Reboot. Method number 2 (only for CM {ab} or with the installed kernel for developers for COS {ab})
Method number 3 Method number 4 Method number 5 Method number 6 (no PC required) -COS13.0 firmware versions do not work CyanogenMod Firmware (OS) Simple option 1) Download the file from the spoiler "Firmware">"Stable firmware">"CyanogenMOD 11S / CyanogenOS 12S">"Firmware for custom recovery" 2) Throw in the root of the phone 3) We sew from custom recovery (TWRP / CWM) with all wipes (/ system, / data, / cahe, / dalvik),except a memory card (/ internal storage) . thankGossspb PS:There is still an easy working option number 1 There is still an easy working option number 2 3rd way to facilitate the firmware process with fastboot Fastboot firmware Description of fastboot firmware files (what exactly each file is for) Text version (video instruction is below): 1) An unlocked bootloader is required. How to do this, read the spoiler "Instructions". 2) Download Android SDK:(mirror, Ya.Disk)and unpack the archive 3) Download the archive with the firmware CyanogenMOD 11S from the spoiler "Firmware">"Stable firmware">"CyanogenMOD 11S / CyanogenOS 12S">"CyanogenMOD 11S">"Firmware for fastboot" and unpack it. We throw the contents of the archive into the platform-tools folder, which is located in the android-sdk-windows folder 4) Turn off the phone. Then boot into fastboot mode. To do this, hold down the volume key up and the power key. The screen should say "fastboot". Open a command prompt as administrator 5) Copy there: cd ***** / android-sdk-windows / platform-tools where ***** is the place where you unpacked the archive with the Android SDK Or it is simpler in Windows to open the window with the unpacked firmware and fastboot.exe and in the free space of the window with the Shift key pressed on the keyboard, press the right mouse button>"Open command window" 6) Next, copy there a number of commands (all your data on the phone, including the memory card, will be deleted): fastboot flash boot boot.img fastboot flash userdata userdata.img (or userdata_64g.img for 64GB version) -This command clears the internal memory card! fastboot flash system system.img fastboot flash recovery recovery.img fastboot flash cache cache.img fastboot flash modem NON-HLOS.bin fastboot flash sbl1 sbl1.mbn fastboot flash dbi sdi.mbn fastboot flash aboot emmc_appsboot.mbn fastboot flash rpm rpm.mbn fastboot flash tz tz.mbn fastboot flash LOGO logo.bin fastboot flash oppostanvbk static_nvbk.bin (if there is such a file ) 7) After executing the command, restart the device: fastboot reboot Video instruction on manual firmware OnePlus One via fastboot: Video instructionfromSkazki Firmware via fastboot in linux Method to facilitate the process of firmware using fastboot Firmware via fastboot on (Mac) OS X If system.img is not flashing, then we read the solution.here Instructions for manual installation of the update (especially for those who had the phone re-flashed by the Chinese) Instructions for installing any firmware for recovery with saving user data using the example of the CM12.0 nightie (suitable for almost all firmware) Instructions for installing firmware from custom recovery,including nightie CM11 / 12/13 Attention! Requires unlocked bootloader and custom recovery. How to do this, look in the spoiler "Miscellaneous". 1) Download the firmware 2) We throw it into the root of the phone's memory 3) Boot into TWRP (custom recovery), to do this, simultaneously hold down the phone's power key and the volume key down 4) Go to the tab "ADVANCED "further note" Dalvik cache ", " System ", " Data "(this item is required if you switch from one firmware to another, it also deletes all your user data, but does not touch the internal memory of the phone)," Cache "(" Internal Storage "do not touch, since the firmware you have is in the internal memory of the phone) 5) Click onInstall , select the firmware file, swipe to confirm the installation and swipe your finger from left to right under the inscription " Swipe to Wipe " 6) (when installing CM {ab} S / COS {ab.c.d}, do not execute this item) Install Google Apps (Google apps, namely Google Play and synchronization apps, if necessary (in the post with the firmware, it should be indicated whether this is necessary): Choose Install, select the file with Google Apps and swipe to install it 7) Reboot EFS partition recovery Video instructions Video instructions for installing custom recovery and getting Root rights from Skazki Video instructions(Ruth and TWRP custom recovery on OnePlus One, Installing custom firmware (CyanogenMod 11), Installing stock firmware using the Bacon Toolkit, backup EFS partition using modified TWRP) frome8genius miscellanea All actions from this spoiler require installed drivers from the header! What is the difference between CyanogenMod 11S from 11 (COS12.x / 13.x differs from CM12.x / 13.x in almost the same) -OPO specific kernel (OPO specific core) -Custom lockscreen (optional) (custom lock screen (optional)) -Double-tap to wake support (double wake support) -Quick boot (hibernation) (fast boot (hibernation mode)) -Capacitive / on-screen nav buttons toggle (capacitive or on-screen navigation buttons) -OPO screen calibration (Calibrate the color gamut of the display from OPO) -Custom CM camera & gallery app (CyanogenMod custom camera and gallery) -Gapps built-in (embedded Google Apps) -Red Cid bootanimation instead of cyan (Red Cid butanimation instead of standard Cyan) -AudioFX instead of DSPmanager (equalizer AudioFX, instead of DSP Manager) -Built in screen capture (built-in video recording from the screen) -Gesture support on screen off (support for track / start / stop music) (support various gestures (draw a circle to start the camera, an arrowhead to start a flashlight, etc.)) Information providedMarvinFstranslatedSkazki. More useful to readthis message. About file system F2FS Description of Govrners and I / O Planners Partition table If SystemUpdateServices constantly wakes up the phone Decisionhere What can be deleted on the smartphone in the / system folder, and what can NOT be! How to make nandroid backup How much do you needaboutcharging time to bring the battery to a real 100% capacity Request password immediately when entering the list of VPN connections Problem solving For the adb and fastboot commands it is useful to read the topic header ADB and all that can be done with it
Recover OnePlus One from full brick Here , but before proceedingread it (battery juggling - loss of warranty! ), this (it is impossible to unlock the bootloader after installing MIUI) and this (Eternal error "Error: AudioFX has stopped" (AudioFX FC))! It is likely hardware failure! If the bottom buttons are lit, but the black screen is unchanged, then a long hold on the power button (>15 seconds). There is a vibration and a full reset of the smart. It is also possible to solve the problem (no longer see the mobile network, WiFi, memory, IMEI, etc.)simpler(Firmware in 3 clicks (need BB (computer)) +another solution If no method has helped, then the last hope forthis optionandthis + this + thisOtherwise, hardware failure and solve it in the subjectOnePlus One - Marriage and Repair . Also helps to read the spoiler spoiler below "Restore from eternal boot (bootloop)". Recovery from perpetual boot (bootloop) If you unsuccessfully flash the phone or after other manipulations the phone does not load the logo, then we do the following (by the way, you can install * .zip firmware from a USB flash drive through OTG in TWRP): Method number 1 (PUSH) 1. Be sure to charge the phone 2. Turn on the phone in Recovery mode and connect it to your computer. 3. Install AndroidSDK or AndroidSDK Slim and ADB drivers (although this should be all you need) 4. Download the firmware you need (which is installed from the recovery) 4.a. Copy the archive with the firmware to the platform-tools folder (for example, C: \ sdk \ platform-tools) 5. Next, in the command line, write cd<path to the platform-tools folder>eg cd C: \ sdk \ platform-tools 6. In TWRP, go to Mount and click Disable MTP there and check if the device is connected with the command adb devices 8. Must see an inscription like "2888 KB / s (658745644 bytes in 175.456s)" 9. Install the firmware from the recovery as usual, pre-make the wipe cache and dalwick 10. Reboot Fast Method number 2 (SIDELOAD) Past polls
The curator is always ready to help you find all the questions on updating your messages and topic materials.Mike9966atQMS Post has been editedMike9966 - 16.04.18, 12:06 Reason for editing: About the irrelevance of nightie CM | ||||||
Message#42 01.07.14, 11:25 | |
Guru [offline] Group: Curators Messages 4664 Check in: 16.11.11 Oneplus one Reputation: 639 | [email protected], 13:34  PS: after all, people, where to see a full list of CM11S chips relative to pure CM11? I found it myselfhere. |
Message#43 01.07.14, 18:10 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 71 Check in: 13.08.10 Oneplus one Reputation: 0 | Lord I have a problem: on my 64 GB, the system sees only 16. The seller said that this was due to an error with the firmware and promised to send instructions on how to fix it - so far there is no instruction, can anyone already encountered a similar one and know the solution? |
Message#44 01.07.14, 18:18 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1086 Check in: 26.09.10 Oneplus one Reputation: 69 | garuda654 Are you familiar with the firmware via FastBut? If so, then you need to flash "userdata.img" from the 64GB version. Posted on 07/01/2014, 18:18: Strap-on,I understand you have ColorOs? That it does not provide Google services. If you put CM11S then all the delights of the "naked" androyd + chips from SM. If you really like ColorOS and you want Google buns, then youhere, description and instruction. |
Message#45  01.07.14, 18:30 | |
ho · ni soit qui mal y pense [offline] Group: Friendssavagemessiahzine.com Messages 774 Check in: 25.01.09 Huawei P20 Pro CLT-L29 Reputation: 121 | At the Oppov forum, I read that franco released his kernel with OnePlus One support. used to build the extreme CM with the latest commits, and constantly updates ... People say they squeezed out the extra hour of working the screen with the kernel tweaks .. for me it is such a fucking awesome result if true! Try who got it already? I'm still in the waiting list, the benefit can be poked in the source code - everything is openly tweaking I do not want! thread on xda http: //forum.xda-devel...nco-kernel-r1-t2800871 Posted 07/01/2014 6:30 PM: yes and still as a colleague ImmortAlex,correctly pointed to the forum - you can add to the header differences CM11 and CM11s (atoms constantly ask everyone) -OPO specific kernel -Custom lockscreen (optional) -Hotword detection -Double-tap to wake support -Quick boot (hibernation) -Capacitive / on-screen nav buttons toggle -OPO screen calibration (search for Supercurio's latest posts on G +) -Custom CM camera & gallery app -Gapps built-in -Red Cid bootanimation instead of cyan -AudioFX instead of DSPmanager - Built in screen capture - Gesture support on screen off (can you remember what it was) -------------------- CU round, MarvinFS |
Message#46 01.07.14, 18:32 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 8705 Check in: 09.05.10 Apple iPhone X Reputation: 868 | [email protected], 19:26 People say they squeezed out another extra hour of screen tweaks to the kernel. Not with the tweaks of the kernel, but with his talk that cuts frequencies in normal work. In general, all the custom kernels on my Nexus 5 caused micro-friezes, as compared to the stock one, no matter how I set them up (I think it will be the same here, although this cyan is already slower on the Nexus5). And yes, where else is the hour of the screen? And so people have 5 hours in LTE mode. On Wi-Fi for 8 hours I saw in people. Post has been editedSkazki - 01.07.14, 18:33 |
Message#47 01.07.14, 18:52 | |
ho · ni soit qui mal y pense [offline] Group: Friendssavagemessiahzine.com Messages 774 Check in: 25.01.09 Huawei P20 Pro CLT-L29 Reputation: 121 | [email protected], 21:32 Not with the tweaks of the kernel, but with his talk that cuts frequencies in normal work. In general, all the custom kernels on my Nexus 5 caused micro-friezes, as compared to the stock one, no matter how I set them up (I think it will be the same here, although this cyan is already slower on the Nexus5). And yes, where else is the hour of the screen? And so people have 5 hours in LTE mode. On Wi-Fi for 8 hours I saw in people. Neponyal, and here the governor who ever talked about him? Have you even read logs and commits on git.habe or just issued it into the air? The review of the people at the core read? If you have something buggy then this is solely your problem. For example, I have different custom kernels on all android devices, including which I collected myself .. nothing is buggy and there are no "micro friezes" anywhere ... before, during the beginning of the android, when the interfaces to the governors were lightly managed, in energy conservation modes, yes, podlagivalo, if the mind is still crooked and you choose an incompatible scheduler ... Actually, how can I not understand it? And then they offer an HOUR (60 minutes) extra time !!!!! For free! but no, people are unhappy! :)))) Post has been editedMarvinFs - 01.07.14, 18:56 -------------------- CU round, MarvinFS |
Message#48 01.07.14, 18:56 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1086 Check in: 26.09.10 Oneplus one Reputation: 69 | MarvinFs, Alas, not everyone with so much experience can compile their core from source. And not everything can be configured through GUIs ... something like this ... When you get the phone, I would be happy with your settings or kernel compilations :) |
Message#49 01.07.14, 18:58 | |
★★★★ [offline] Group: Friendssavagemessiahzine.com Messages 2626 Check in: 07.11.10 Reputation: 517 | Strap-on @ 07/01/2014, 19:16 Guys, why do I have a google browser but no google account and if I put 11s then will there be a google market and account? In the nightly build of ciagen, there are no Google services, they must be separately stitched through recovery. In 11S, Google has services. Post has been edited• migg • - 01.07.14, 18:59 |
Message#50 01.07.14, 18:59 | |
ho · ni soit qui mal y pense [offline] Group: Friendssavagemessiahzine.com Messages 774 Check in: 25.01.09 Huawei P20 Pro CLT-L29 Reputation: 121 | [email protected], 21:56 Alas, not everyone with so much experience can compile their core from source. And not everything can be configured through GUIs ... something like this ... When you get the phone, I would be happy with your settings or kernel compilations :) Of course I'll do it! :) I am always for the additional conservation of energy! :)) And in the case of this kernel, you don’t need to know anything - you can flash through the proprietary utility https: //play.google.co…s? id = com.franco.kernel she and here on the forum is ... You can through the recovery - this procedure is 5 minutes. (there even seems to be a signed fastboot kernel in the thread on the XDA), you can sew fastboot through standard it is efficiency that interests you, otherwise you can say anything ... although they write that, wow, yes! PS: Any firmware is a risk to kill the device, regardless of the conditions, circumstances are different, so if there is no experience at all, I would first think 3 times and read the instructions on how to unmask dead carcasses (unbrick) and make 2 backups just in case. .. and then I would experiment ... but first I would have thought 3 times! In order not to cry later on the forum help guys! :) I once helped this kid remotely, I don’t know from which city, also here on the forum, I flashed my firmware into the tablet and the tablet died all - it’s extremely difficult to figure out where and how it was done ... it seems like I did everything correctly mda ... I was fond of this matter for a long time and persistently ... then it turned out that he had a tablet of a different model ... and Sewed from his firmware from another model ... so then ... the tablet was revived ... In general, this instructive should be added to the instructions before recommending the firmware! :) Post has been editedMarvinFs - 01.07.14, 19:06 -------------------- CU round, MarvinFS |
Message#51 01.07.14, 19:19 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 8705 Check in: 09.05.10 Apple iPhone X Reputation: 868 | [email protected], 19:52 If you have something buggy then this is solely your problem. I'm not buggy. So it was with everyone who sat on the drain and tried the custom-core;) And franco has his goverter, which is tuned to his core by him. I am writing about it and writing if someone does not understand what it is about. I'm sorry. And yes, since it’s about franco, then those who have been sitting on GN-devices for a long time have a so-called attitude to it. Post has been editedSkazki - 01.07.14, 19:22 |
Message#52 01.07.14, 20:07 | |
ho · ni soit qui mal y pense [offline] Group: Friendssavagemessiahzine.com Messages 774 Check in: 25.01.09 Huawei P20 Pro CLT-L29 Reputation: 121 | [email protected], 10:19 And franco has his goverter, which is tuned to his core by him. I am writing about it and writing if someone does not understand what it is about. I'm sorry. And yes, since it’s about franco, then those who have been sitting on GN-devices for a long time have a so-called attitude to it. And in this sense, well, it is quite possible ... yes, and I'm not doing advertising here! I clung to the large add. battery saving time - I personally find it extremely interesting and relevant, therefore, at the end of the week, it will arrive and we will immediately begin the experiments! He simply writes that right now the settings were not made for his core by him, but for a specific device in this case, OnePlus, therefore, the effectiveness is immediately on the face ... let's see ... used to checking in practice, the atoms on the fence are also written! :) -------------------- CU round, MarvinFS |
Message#53 01.07.14, 22:37 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 102 Check in: 16.02.09 Xiaomi Mi Mix 3 6/128 Reputation: 10 | Gentlemen, moderators and top-starters, could you add to the header right now it’s fatty that after flashing from ColorOS to Cyanogenmod in Russia will LTE work? I read the topic, it seems to work, but whether all the Bands will be covered and in general what is the information on the difference in hardware, is it not enough. At the OPO forum, they instilled fear in me that China is only for China. |
Message#54 01.07.14, 23:18 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 377 Check in: 13.03.09 HTC Touch Diamond Reputation: 26 | NeoCreator,gang do not depend on the firmware ... -------------------- SimensC25 | C35 | S35 | LGW5200 | Nokia6310 | 6230 | 6600 | MotorolaV600 | MPx220 | Qtek9100 | HTC Diamond | Desire | Sensation XL | OneX | OnePlusOne bye stock |
Message#55 02.07.14, 05:40 | |
Guru [offline] Group: Curators Messages 4664 Check in: 16.11.11 Oneplus one Reputation: 639 | [email protected], 10:30 You can add to the header differences CM11 and CM11s I, by the way, looking at these differences almost do not see the buzz. The points: -OPO specific kernel Who else would say that it is specific. -Custom lockscreen (optional) I saw in the review at Schwartz, and just like him - I do not see much sense. In cyan, regular lockscreen has so many settings that you don’t have to hang anything from above. -Hotword detection -Double-tap to wake support -Gesture support on screen off Yeah, that all off, because some glitches. -Quick boot (hibernation) Yes, it loads so fast, thanks to the processor and high-speed flash drive. -Capacitive / on-screen nav buttons toggle I never bothered, but for sure there is an application that implements the on-screen buttons. -OPO screen calibration Seen in commits cyan, probably will be in the normal version. -Custom CM camera & gallery app What is the difference in the camera - I did not understand, but the gallery anyway QuickPic will not catch up. -Gapps built-in Put in five minutes, and the choice - from the full to the minimum. I, for example, put a minimum - a market and synchronization. It is simpler than cutting out titanium full trash. -Red Cid bootanimation instead of cyan What a tragedy! Wallpaper still forgotten, yes. -AudioFX instead of DSPmanager What is the coolness relative to the staff - I did not understand from the reviews. In the regular options dofiga too. - Built in screen capture Few people need. Yes, and certainly there are third-party software. This is my personal IMHO. The device will come, there just will be the next release of pure cyan, and I will install it: P |
Message#56 02.07.14, 05:52 | |
ho · ni soit qui mal y pense [offline] Group: Friendssavagemessiahzine.com Messages 774 Check in: 25.01.09 Huawei P20 Pro CLT-L29 Reputation: 121 | [email protected], 08:40 The device will come, there just will be the next release of pure cyan, and I will install it: P Strongly agree with the assessment, propriety in 11s is nothing at all, but with updates there it is extremely sad! Therefore, I also vote for CM11 (I would have looked at the custom kernel) By the way, humor ... before CyanogenMOD was considered a super custom firmware with a super custom kernel .. and right now, like people say, I’ll stay on the "stock" Cyan core! :))) -------------------- CU round, MarvinFS |
Message#57 02.07.14, 06:15 | |
Guru [offline] Group: Curators Messages 4664 Check in: 16.11.11 Oneplus one Reputation: 639 | MarvinFs @ 07/02/2014, 09:52 By the way, humor ... before CyanogenMOD was considered a super custom firmware with a super custom kernel .. and right now, like people say, I’ll stay on the "stock" Cyan core! What can I say, Cyan "came to success": the firm, the stock, everything. |
Message#58 03.07.14, 15:21 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 136 Check in: 21.08.07 Google Pixel XL Reputation: 0 | Tell CM11 only through custom recovery can I put? |
Message#59 03.07.14, 15:22 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1086 Check in: 26.09.10 Oneplus one Reputation: 69 | lukakirill Yes, only through custom and fastboot. |
Message#60 03.07.14, 16:40 | ||
ho · ni soit qui mal y pense [offline] Group: Friendssavagemessiahzine.com Messages 774 Check in: 25.01.09 Huawei P20 Pro CLT-L29 Reputation: 121 | Mr. Franco from sunny California sends his regards to the owners of OnePlus One and sends his fiery regards! To the questions what exactly he did with the kernel, he explains in detail: (yesterday) and releases the r2 kernel version (under the spoiler) Basically stock Kernel was already performing good enough: 1 - get rid of mpdecision and use my hotplug driver. ipodcision cpu1 everytime you touch the screen 2 - has been changed (courtesy of @stratosk). Interactive battery tunables for better battery life 3 - cleaned up the kernel from debug crap etc 4 - removed some overhead by disabling RUN_QUEUE_STATS which is meant for mpdecision 5 - removed overhead by calculator (we do not use this) 6 - FIFO (FIFO) 7 - added sound control capability (headphone, speaker and mic gain) 8 - CM card patches which can be fixed as charging rate (was charging at USB rate ...) 9 - ULPS enabled and partial_updates 10 - cleaned up scheduler from get (put) _online_cpu calls 11 - merged a deeper suspend state (SUSPEND_FREEZE) 12 - The rest is mostly cherry-picks If you’re a little bit jumpy, you shouldn’t have a bit of a jump. At the end of the note that the r2 version is coming and it will also be optimized, including energy consumption. Version r2 did not keep itself waiting today: boot image: http://kernels.franco-lnx.net/OnePlusOne/4.4/ zip: http: //kernels.franco -...et/OnePlusOne/4.4/zips Installation via ADB fastboot fastboot flash boot boot_name_img or through recovery: flash the .zip in the recovery Changelog: http: //kernels.franco-…46; ./changelog.xml Source: https://github.com/franciscofranco/one_plus_one Got any questions that you couldn't find after searching? FAQ:http: //forum.xda-devel…/show....php? t = 2532422 Changer in the picture!
PS Skeptics in the past discussions of the core please pay attention to the complete absence of references to the processor frequencies. As I said here more than once, the governor manages ALGORITHMS and modes of operation of the processor cores, and the frequency is a personal matter for everyone (I personally always underestimate myself to the maximum) Post has been editedMarvinFs - 04.07.14, 04:13 -------------------- CU round, MarvinFS | |
Message#61 03.07.14, 22:32 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 146 Check in: 14.05.10 Oneplus one Reputation: 8 | Two questions: 1. Does the device support from the initial color os but is interchanged with cyan and automatically install cyan updates. 2. How to switch to English in standard recovery. thank! |
| mobile version | Now: 05/20/19 00:47 |
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement