5 pagesV  < 1 2 3 4 5 > »  
 
REPLY
> Intro CHR-7759 | image needed
NORRINGTON
Message#21
06.11.15, 11:30
a guest
*
[offline]

Group: Users
Messages 4
Check in: 14.05.14

Reputation:-  0  +

I apologize for not finding a topic with such a model of a radio tape recorder, so I will ask the question here as in the closest topic.
Receiver INTRO Incar CHR-3131 CH.The owner has cleaned the registry of the radio tape recorder does not start lit logo of the company.
Turned to technical support sent instructions How to restore the operating system and install a new shell
and two more archives in one file in another folder with files. I acted according to the instructions of the radio tape recorder on the automatic loading
I tried and AppUpdater on the card throwing anyway, the automatic installation does not start.
It seems that some kind of system file has been deleted. Can anyone know how to climb into the radio in Windows and see what is torn down there.
Or is there some other solution to the problem?

Attached files

Attached fileHow to restore the operating system and install the shell.rar(713.74 KB)
didenko9000
Message#22
02.01.16, 17:53
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 88
Check in: 29.12.12

Reputation:-  0  +

Hello everyone and with NG you. Help: help: I ​​need help with the firmware of this unit CHR-6753 (I could not find a smarka anywhere, but it seems like an intro) on WIN CE6. The problem is that the GPS program does not work. neither flash drives nor sd cards work. They are loaded, but when you click on the play radio, it hangs and does not work until it restarts. How many did not look for information on the firmware and did not find it. I hope that I will find help here. standing on lancer x. Thanks in advance:savagemessiahzine.com:

Attached images
Attached Image
Attached Image
motocan
Message#23
16.03.16, 16:34
a guest
*
[offline]

Group: Users
Messages 1
Check in: 29.02.12
Motorola MotoFone F3

Reputation:-  0  +

Hello, I need help. I bought a car, there was a tape recorder intro i9 (http: //www.intro-onlin…1347875198_CHR_i9.pdf)Now I wanted to install a rear-view camera, but the ss and dd cables (in the diagram from the link above) were not in the radio (. Is it possible to purchase it separately? Or at least rapinovka
Lexat
Message#24
21.03.16, 01:20
a guest
*
[offline]

Group: Users
Messages 2
Check in: 14.02.12

Reputation:-  0  +

bought a car with a tape recorder intro chr-7750
The touch screen on it almost does not work, it is shifted in places and in places it does not react at all, can it be calibrated either for a replacement or will the firmware help?
and the same does not respond to the console, can I connect a mouse and use it to enter settings for calibration?
mark_vs
Message#25
21.03.16, 08:56
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 442
Check in: 10.01.12

Reputation:-  25  +

Sensor change.


--------------------
Winca (Redpower) S60, S100, S120, S150, S160, S180,
Newsmy, Eonon, FlyAudio, ForYou, INTRO (INCAR, Roadrover), Phantom ....
I will help to recover ...
Ckbad
Message#26
09.04.16, 12:33
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 119
Check in: 11.08.09
OPPO Find 5

Reputation:-  0  +

Good day everyone! Radio cassette player 7759
I decided to update the software, installed it from this branch and got a brick.
Those. The radio is turned on and a white screen appears. White stripes begin to appear on it.
Picture
On the flooded software on the flash drive does not pay attention.

Who faced?

Post has been editedCkbad - 09.04.16, 12:35
soslan-a
Message#27
23.05.16, 10:46
Visitor
**
[offline]

Group: Users
Messages 12
Check in: 12.11.10

Reputation:-  2  +

Maybe it was crooked? Try again.
Ckbad
Message#28
23.05.16, 11:34
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 119
Check in: 11.08.09
OPPO Find 5

Reputation:-  0  +

Soslan-a @ 05/23/2016, 10:46*
Maybe it was crooked? Try again.

And no longer able to flash. The service said they need to change the mother = 7500
sasha051975
Message#29
03.08.16, 01:46
Visitor
**
[offline]

Group: Users
Messages 12
Check in: 05.12.12

Reputation:-  0  +

INTRO CHR-4677 M7 for Mazda CX-7 OS: EN-PRIMA-ARM-SLC-V1.42 MCU: 7.02CX76N9IN8R.

I was puzzled to update it. Well, the type wanted to chegon new. And then the radio began to work with stuttering (it works for a while and then pauses for a second. And so with chaotic intervals at all stations). I think it can cure the firmware. I re-read a bunch of forums, something already in the head started to be finalized and structured.
And here, take and write to Intra support service. So they say, and so, I want to update and there is a problem, throw off the firmware. And he got the answer, literally:
“1.On this device is a motherboard, on which you can not put the MCU other than 7.02. All other software will turn this GU into a "brick" with subsequent paid restoration in service.
2.This MCU without BOSE, device memory 128Mb
3. For our part, we can offer MCU c7.02 - already with the RDS functions turned off completely, if the device does not help in repairing - in service.
We send the software one by one of the documents (photo or scan):
1. Filled warranty card or
2. Work order from the dealership with stamps and the date of sale or
3. Photo of the top metal cover of the unit WHOLE, with all the stickers, including our warranty stickers. "

I bought it exactly in Russia in 2012, I already touched documents somewhere, and it’s not comme il faut to remove the radio tape recorder .. And without this, the Introvs will not send even MCU 7.02 with RDS disabled.

So, Dear forum users, tell me, is it really impossible to update my device or is this Intra service frightening? And maybe someone has an MCU 7.02 with RDS / PTY turned off, etc. for my GU?
mark_vs
Message#30
03.08.16, 07:55
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 442
Check in: 10.01.12

Reputation:-  25  +

Sasha051975 @ 08/08/2016, 00:46*
Also, the radio began to work with stutters - it works normally for a while and then for a second pauses. And so with chaotic intervals and at all stations. I think it can cure the firmware.

Not cured. And you do not frighten. You will experiment with the firmware - go to the topic "help recover after unsuccessful firmware."
What do you need from a radio?


--------------------
Winca (Redpower) S60, S100, S120, S150, S160, S180,
Newsmy, Eonon, FlyAudio, ForYou, INTRO (INCAR, Roadrover), Phantom ....
I will help to recover ...
Gusstavgray
Message#31
07.09.16, 21:12
a guest
*
[offline]

Group: Users
Messages 8
Check in: 22.04.16
Sony Xperia Z

Reputation:-  0  +

I tried the firmware! There are nuances, it hangs with firmware, on a red screen. The camera and buttons also work after glitches, inadequately. incar chr-7735.
cergeq-555
Message#32
23.01.17, 13:37
a guest
*
[offline]

Group: Users
Messages 7
Check in: 10.03.16
Asus zenfone 5

Reputation:-  0  +

The current firmware image for the Intro CHR-2274 is being searched. Help, Thanks for the early ones !!! : drinks:

Post has been editedcergeq-555 - 23.01.17, 13:45
G_Amb1t
Message#33
14.02.17, 10:14
a guest
*
[offline]

Group: Users
Messages 3
Check in: 16.01.15
Lenovo S850

Reputation:-  0  +

Hello everyone, I could not create a topic, so I am writing here. I have a radio INCAR CHR-7120, the question is, is it possible to install Android instead of windowsCE?
Link to mayfun
http: //autotuning-aks...r-chr-7120-detail.html
kanzler70
Message#34
16.03.17, 10:57
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 642
Check in: 28.10.11
Apple iPhone 7 Plus

Reputation:-  30  +

Attention owners Incar CHR-7735 and Intro CHR-7759, the rest can try to work out, after a long ordeal figured out and was pleased with the device.
We enter the service menu by pressing and holding for 4-5 seconds the point on the screen indicated on the attached photo and then working with it (it is necessary to have an SD card in the navigator slot, even if clean):
Attached Image

In this menu there are different settings, for example, so that the music is sorted into folders, and not a list of files, setDVD2, by default, it can stand or self-reset (as it was with me) onDVD0:
Attached Image

You can also set the default volume level at power on:
Attached Image

You can remove unnecessary (unnecessary) icons on the main table by setting it to OFF:
Attached Image
Attached Image

Do not click on the "economy" button in the lower right corner !!! otherwise, then an inscription will be displayed in English when the device is turned on, and to remove it you will need to remove it from the USB stick where the Navitel is to delete the Autoconfig.xmt file.

Post has been editedkanzler70 - 17.03.17, 08:48


--------------------
He who defends well, hides in the depths of hell;
he who attacks well acts from the heights of heaven.
Sun tzu
letchik71
Message#35
22.03.17, 09:39
a guest
*
[offline]

Group: Users
Messages 1
Check in: 12.03.17

Reputation:-  0  +

SWAT SHR-9035 hung on the logo, cured by the actions described above (for CHR-7735)
NovXiaomi4X
Message#36
24.05.17, 15:57
Visitor
**
[offline]

Group: Active users
Messages 15
Check in: 04.05.17

Reputation:-  0  +

Hello, can anyone share a copy of the flash with a set of navigation programs for 7120
Kolyan89
Message#37
14.06.17, 09:16
a guest
*
[offline]

Group: Users
Messages 3
Check in: 12.06.17

Reputation:-  0  +

Hello ... I am a beginner, I do not know where to turn ... you need firmware on 7730, tell me where to find ... and how to install ...? Thank you in advance...
alex1972fcsm
Message#38
14.06.17, 22:37
a guest
*
[offline]

Group: Users
Messages 1
Check in: 18.05.12

Reputation:-  0  +

Good evening. So is it possible to solve Windows CE6 on Android INTRO 7759?
Kolyan89
Message#39
17.06.17, 10:53
a guest
*
[offline]

Group: Users
Messages 3
Check in: 12.06.17

Reputation:-  0  +

No, It is Immpossible...
Bolt2277
Message#40
28.08.17, 17:06
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 06.03.15

Reputation:-  0  +

All good health! Can someone tell me where you can get the software on the CHR-6107 LAN?
I contacted INTRO support, they replied: "Unfortunately, we do not have software for this device - it is very old."
Thanks in advance!

5 pagesV  < 1 2 3 4 5 > » 


 mobile version    Now: 04.30.19, 07:08