[X]Assistant

[Enriki]

IQ4501 Quad EVO Energie 4 - Official firmware (OS 4.2)


Description | Discussion пїЅ | FirmwareпїЅ

Drivers and Utilities

MTKPhoneDriver.zip(37.67 MB)
- Drivers
SP_Flash_Tool_v3.1336.0.198.zip(7.03 MB)
- Flash Tool for flashing the phone
MtkDroidTools 2.5.3.zip(10.57 MB)
- Application for root, backup

Firmware

Official

SW12
Fly-IQ4501_sto ck_root

Custom

CM12.1 Stable V3 Ported From MMX Wiko Rainbow
port miui
Axer kk 3.1 beta
CleanKAT M2 v2.9.2 (without Russian)
HIVE ROM

Instructions

Driver installation
Flash Tool Firmware
Getting Root rights
Another way to get Root rights
MIUI installation

Recovery

TWRP 2.8.7
CWM Recovery
TWRP Recovery 2.6.3.0
Stock recovery

miscellanea

Returning stock pictures (logo) installation via mod recovery
Switch language on custom firmware
Stock modem

Embellishments

Axer KK stock theme
Theme for Axer KK
Stock font for Axer KK
Getting Root on 4.4.2
Route SuperSU through recovery

For filling caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedklich007 - 02.02.16, 09:07

Reason for editing: installing MIUI

[Acroman]

The boys are some kind of ambush, there is no vulnerability for the root. I tried KingoRoot, Chinese VRoot, framaroot different versions and there is a Chinese program in my zagazhnik that puts almost all the root, but here it also gives an error: no:

[Acroman]

I tried through the MTK Route which is on the forum, does not see the phone. And about the drivers, download the computer itself when you connect the phone with power on debugging on

This is the program. Before launching, the Internet is turned on and debugging via YUSB. Next, the program reads some data for itself and if it successfully issues the ROOT button, click. It will ask you to install Chinese trash (without it, not until you install it, then delete it) and then it will issue two buttons at the bottom of the screen, press the left one. The body will reboot or wait a little and restart yourself. After the program starts, it carries out some other manipulations and all the root is ready.
ROOT-com.zhiqupk.root-211-v2.1.1-spaces..apk(4.48 MB)


Post has been editedshoma_81 - 11.06.14, 15:08

Reason for editing: merged messages

[Enriki]

Driver installation

And so, you decided to flash the phone.
1) Download these drivers -MTK Phone Driverand unpack them on the desktop
2) Click on "DirverInstall.exe" and confirm everything
3) We connect the switched off phone to the PC - it is determined without any problems
3) Now everything is ready for firmware

Manual installation

1) Download these drivers -MTK Phone Driverand unpack them on the desktop
2) Connect the switched off phone to the PC
3) Go to the Control Panel - System - Device Manager - There we see the "IQ4501" with an exclamation mark.
4) Click PCM - Update drivers - Run a search for drivers on this computer - Click "Browse" and specify the path to the folder with drivers - Next - Select "MediaTek Preloader" and click Next
5) Everything, the driver is installed

In order to avoid conflicts, remove all previous drivers from past phones on MTK

Post has been editedEnriki - 27.05.14, 19:55

[Enriki]

Instructions for firmware via Flash Tool

So. We have already installeddriversand ready to take further steps

1)Download the flash driver -SP Flash Tooland unpack it on the desktop
2)We download the firmware itself -SW12or any friend from under the spoiler "Firmware" and unpack the table on the slave
3)Run "Flash_tool.exe" in the folder of the flash driver
4)We press in it "Scatter-loading" and specify the path to the file "MT6582_Android_scatter.txt" which is located in the folder with the firmware
5)Below is a list of images on which will be a jackdaw.I strongly recommend removing the checkbox from the "Preloader", because if an error occurs during the firmware of this module, you will mimic the phone} -)
6)Click on the top "Download"
7)We connect the switched off phone to the PC
8)The firmware process has started. At the end of which a window will pop up withgreen circletalking about successful firmware
9)Disconnect the phone from the PC
10)Turn on the phone and wait for the download. We are happy :)


Post has been editedEnriki - 27.05.14, 19:12

[Bully_39]

I got Ruth using the programKingo Android ROOT

We install it on the PC, in the phone settings we tick the "usb debugging" and "unknown sources" (without ticks, the program will give an error!), Launch the program, connect the phone and follow the not tricky program prompts)) phone, during this process, reboot a couple of times: rolleyes:

Kingo Android Root

Post has been editedshoma_81 - 11.06.14, 15:06

Reason for editing: merged messages

[Bitkovski]

Everything would be fine, but it strains the jamb of firmware with the addition of widgets.

[Bully_39]

Bitkovski,

Bitkovski @ 05/29/2014, 1:49 PM

Everything would be fine, but it strains the jamb of firmware with the addition of widgets.

What's wrong with the widgets?

[Bitkovski]

Zabiyaka_39 @ 05.29.2014, 16:55

What's wrong with the widgets?

And it gives an error when adding to the desktop. I tried on several launchers, nothing changes.
By the way, I can’t have one.

Post has been editedBitkovski - 29.05.14, 14:14

[Bully_39]

Bitkovski @ 05.29.2014, 14:13

And it gives an error when adding to the desktop. I tried on several launchers, nothing changes.
By the way, I can’t have one.

On third-party launchers, yes ... there is such a problem! So I had to leave the stock for now ... o.O

[5tor4ok]

I can not get the root of the law, help! Nor king, nothing else!

Post has been edited5tor4ok - 31.05.14, 15:43

[maslitek1611]

5tor4ok,Download the latest version of Framarut and you will be happy.

[5tor4ok]

I didn’t find a fresh 1.9.2 fram but, alas, ah ...

[Bitkovski]

[email protected], 04:33

I didn’t find a fresh 1.9.2 fram but, alas, ah ...

http://trashbox.ru/fil...d3/framaroot_1.9.2.apk
Framaroot

Post has been editedBitkovski - 01.06.14, 06:45

[Bully_39]

5tor4ok @ 05/31/2014, 15:42

I can not get the root of the law, help! Nor king, nothing else!

Ticked on "debugging via USB" and "unknown sources" set?

[hanuma50]

TWRP Recovery 2.6.3.0 download

Screenshots

Download recovery_TWRP_IQ4501.img(5.9 MB)


Installation Recovery (need ROOT) В® Mobileuncle MTK Tools
Copy recovery to sdcard root

INSTRUCTIONS

QMS Questions

Post has been editedhanuma50 - 07.06.14, 07:56

[Bitkovski]

[email protected], 00:19

Download recovery_TWRP_IQ4501.img (5.9 MB)

Krasava. Everything was established according to the same instructions as in IQ4404 Spark. But unlike Spark, here the touch works. I am grateful !!! +

Installing recovery without a computer
1. Get root
2. Install Android Terminal Emulator
3. Download the recovery.img image (5.4 MB)

4. Copy the downloaded image to the root of the memory card
5. Run Android Terminal Emulator
6. Enter in turn
su
cat /sdcard/recovery.img>/ dev / recovery; sync
reboot recovery
After entering the su command, you will be prompted to allow superuser rights. Must be allowed.
After entering all the commands, the phone will reboot into the freshly requested recovery.

Post has been editedBitkovski - 07.06.14, 07:06

[5tor4ok]

Ticked on "debugging via USB" and "unknown sources" set?


Taki put, but, alas, and ah. Not a novice in disputes with silicon comrades, but something in any way ... If it comes out, I will be happy to be public. Thank you, people, for participating.

[ruzik2013]

for getting root rights Baidu Root works fine

[bah-babah]

Has anyone installed a XposeInstaller and GB? Something GB does not work for me, although it is activated.

I also saw, with firmware on off. From the header, if you enter recovery, then there is TWRP, if it was previously flashed.

I would like to make the background of sms / mms, dialers and contacts dark, but it still does not work ... No one tried? Editing build.prop did not help .. Actually, someone tried to customize, optimize, change something etc ...?

Post has been editedshoma_81 - 18.06.14, 17:28

Reason for editing: merged messages

[Acroman]

[email protected], 11:14

I also saw, with firmware on off. From the header, if you enter recovery, then there is TWRP, if it was previously flashed.

Posted on 06/17/2014 10:14:

I would like to make the background of sms / mms, dialers and contacts dark, but it still does not work ... No one tried? Editing build.prop did not help .. Actually, someone tried to customize, optimize, change something etc ...?

Try a third-party program like Go sms and Go contacts, there are dark themes, there are also on the PixelPhone forum (but it is paid, but it works fine with two SIM cards) and also a lot of topics

Post has been editedAcroman - 17.06.14, 15:06