[X]Assistant

[Sergey_Ace]

Cubot One - Firmware
Cubot one
Description | Discussion пїЅ | Purchase пїЅ | Firmware пїЅ

miniFAQ

Drivers and Utilities

• SP_Flash_Tool_v3.1328.0.183
  
• SP_Flash_Tool_v3.1304.0.119
  
• Excellent driver for Preloader with instructions inside
  
• SN Write tool
  
• Android Gadget CDC Driver for SN Write tool

Firmware

Installing third-party firmware, may lead to loss of information, as well as damage to the device!
You take actions in this direction at your own risk!

Comparative table of firmware ratings in different modes
Firmware rating tablesfromlegiondark

пїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

For respected romodelov your themes

Stock Jelly Bean 4.2.1

- firmware_cubotOn_16072013
- One_CUBOT_D1_V0.3_20130716
- One_CUBOT_D1_V0.4_20132311
- One_CUBOT_D1_V0.6_20131009
- One_CUBOT_D1_V0.8_20140124_MJK
- One_CUBOT_D1_V1.5_20140508

- Qumo Quest 474
- Carbon G800_JK808_D1_V0.7_20130716_ repack_by_Legiondark -(Post # 27247493)
- Qumo Quest 474 for CWM
- Official firmware Qumo Quest 474 based on MTK 6582 processor for the Flash Tool
- Backup clean firmware Qumo Quest 474_v0.2_MT6582_4.2.2
- Official firmware Qumo Quest 474 mt6589 for Flash Tool

LewaOS

- LEWA OS 5.0 11/13/22
- LewaOS_5.0_13.11.28S_Turbo_port_by_Legiondark_V3
- LewaOS_5.0_13.12.13_Turbo_port_by_Legiondark
- LewaOS 5.0T_14.01.24 and LewaOS 5.0T + _14.01.24
- LewaOS_5.1T_14.03.21_port_Legiondark
- LewaOS 5.1, 6.0 by alexanrin

MIUI

- MIUI 3.12.13 (JB 4.2.1) by Maximus1a
- MIUI V5 RUS by stas2z(updated post)
- MIUI V5 RUS byDaniil2017(Red Rice port)(updated post)
- MIUI V5 RUS 4.2.23 by stas2z(FULL ROM for SP Flash Tools)
- MIUI V5 RUS by stas2z 4.6.2portmitro2506
- MIUI V5 RUS by stas2z 4.8.27portmitro2506
- MIUI with Red Rice v16portWol_F
MIUI V5.2

Who drives the battery when charging on the phone off

Unpack the archive, and put the file using Root Exporer in the system \ bin folderipod.rar(12.03 KB)
, set the right "G"

ports from the "Brothers"

- KVD K7 Firmware
- Reassembled firmware from KVD K7 v0.1 under CWM recovery
- Reassembled firmware from Tronsmart TS7 Glacier 4GB Clone for Cubot One
- There was Tronsmart, and became Cubot
- Testing Android 4.3

ports with Jiayu G4

- CUBOT-ONE-JG4

Cyanogenmod

- Vowney V5 Firmware
- Cyanogenmod 10.2

Life

- Firmware from Jiayu G4

Android 4.3 in Galaxy S4 style

- XPLOR S4_for_CUBOT ONE_port Legiondark_V4
- XPLOR Z 4.3 V1_for_CUBOT ONE_port Legiondark -(Post # 28623625)

Color OS

- OPPO COLOR OS
- ColorOS Alternative
- ColorOS from Legiondark
- ColorOS by alexanrin

KeleUI

- port of Dakele Big Cola KeleUI

Star S4

- Star S4 port

Lenovo port

- Port with Lenovo S920 + AROMA Installer v1.2
- Lenovo port
- VibeROM Lenovo A820 V1.4 + AROMA Installer from 03/16/2014

SONY (vredniiy_v3.2.1)

- SONY port (vredniiy_v3.2.1)
- Cubot One - Firmware (Post # 31656297) - (Post # 31656297)

MERE_MOD_FINAL_CUBOT_ONE

- MERE_MOD_FINAL_CUBOT_ONE \ Fake 4.4.2 AOSP

SONY XPERIA port

- SONY XPERIA port
- PureXperiaZ2

Port sense

- SENSE NX

iOS6

- iOS6

HTC One M8

- HTC One M8

Philips W8510

- Philips W8510 EXCLUSIVE V.1.0 by DOC2008

Yandex.Kit

- Yandex.Kit

Android 4.2.2 lite

Android 4.2.2 liteportmitro2506

Androlum

Androlumportmitro2506

MUSEUI

MUSEUIportmitro2506

Senseui

Senseuiportmitro2506

X-Mi_Ultimate

X-Mi_Ultimateportmitro2506

NEXUS 5

NEXUS 5portmitro2506

VibeX Rom

VibeX Romportmitro2506

BAIDU OS v6

BAIDU OS v6portmitro2506

General Mobile Discovery Stock ROM JB 4.2.1 v6581 (03/06/14)

General Mobile Discovery Stock ROM JB 4.2.1 v6581 (03/06/14)portmitro2506

Ports firmware from alexanrin

KitKat, based on Cyanogenmod.Deodex for Karbonn JK808
VibeUI v2
KeleUI 2
Cyanogenmod 11 4.4.2 & mod
EternityOS VibeUI 07/16/2016
Baidu v6 alternative
LegoIce 3D UI
Mod L v1.1.1
MuseUI
MiUI su 4.11.21
Alternative V5U
Gravity x
GK-Mod_Lollipop5.0
Exlusive OS
AOSP 4.2.2
Narutofied Stock M
EternityOS v3
Xperia z
Superbean
VibeUI based on Xperia
Nexus stok
MiUI 7.1.26
Lewa OS 7.0
Lewa OS 6.5
RESURRECTION REMIX 3.2.17 style runoff
Resurrection Remix Dream
MOKEE N style runoff
A.I.C.P. Lite
Slim fresh
Nitrogen os

ROOM Karbonn KS808T shot with MtkDroidTools

Instructions

Getting root rights

Attention, these operations are done at your own risk!

Receiving the root and further modifying the system (firmware) increases the risk of rejection of the warranty. Not all service centers can find that the system has been modified, but if you want to visit a service center you need to flash the official firmware.

Rooting (rooting) - the process of obtaining administrator or superuser rights on Android devices, which makes it possible to perform all operations without exception. The main purpose of the routing is the removal of the manufacturer’s (operator’s) restrictions, the manipulation of system applications and the ability to launch applications that require administrative rights.
Questions beginner root user

To get root-rights in one click and without a computer, useFramaroot

Instructions on firmware

Instructions for firmware via SP Flash Tool

IMEI repair instructions

IMEI repair instructions
Repair IMEI

Recovery

Installing and using a recovery, other than the factory, can lead to loss of information, as well as damage to the device!
You take actions in this direction at your own risk!

Recovery (rekoveri) is used in most cases in order to make a wipe data / factory reset (reset to factory settings).
With the machine turned off (not connected to the network or computer), press the "loudness increase"and"turning on". After the image of the lying robot appears, release the buttons - we get to the Recovery menu. Navigating the menu is done with the buttons"loudness reduction"and"loudness increase"action confirmation - button"turning on".

ClockworkMod recovery (CWM)(only for devices purchased in 2013 (firmware 0.3-0.6))

What is CWM?(FAQ)
How to install CWM and make a backup

TeamWin (TWRP)(only for devices purchased in 2013 (firmware 0.3-0.6))

What is TWRP?(FAQ)
How to put + instruction (2.5.0.0)
TWRP 2.6.3.0
TWRP 2.6.3.0 for QUMO QUEST 474 (MT6582)

MIUI Recovery(only for devices purchased in 2013 (firmware 0.3-0.6))

What is MIUI Recovery?(Author's page (eng))
File itself

Carliv Touch Recovery(only for devices purchased in 2013 (firmware 0.3-0.6))

Carliv Touch Recovery 6.0.4.4

ClockworkMod recovery (CWM)(only for devices purchased in 2014 (firmware 0.7-0.8))

What is CWM?(FAQ)
Also install via MobileUncle Tools

Post has been editedSergey_Ace - 16.03.17, 13:08

Reason for editing: Resurrection Remix Dream

[Yu. Yu]

marcus77777
I also tried to install it, it does not work. For some reason, the display of percentages of the battery was lost ..: girl_cray:
What can I do, do not tell me? : sveta:

[Sergey_Ace]

Yu. Yu,
Settings ->Personalization ->Statusbar Battery Style

[Yu. Yu]

Do not kick strongly if the question is not in the subject. Where is it technically better to install third-party applications on SD or internal storage?

[ilyagurow]

Gentlemen, I have a question, while briefly.
Through the SP Tool I tried to sew, write an error and do not sew. I tried different versions of the program (I do not see how the error looks until I have a phone at hand).

Through standard recovery, choose .zip firmware, total - aborted.

I tried to put a custom recovery ... in the end - recovery as such on the phone ceased to exist. Those. neither the combinations of the buttons "goromkost +" and "power", nor the means of the mobile uncle and other analogues, do not enter into the recovery mode.

Can you tell me in which direction to move?

Pysy. backup did not do: sveta:

Pysy. The phone boots normally, it rings, all other functions also work. When you try to enter rekoveri, the phone weighs a few minutes on the "CUBOT" screensaver, then the screen blinks and the phone boots in normal mode. There is still some kind of inscription pops up on the desktop, such as an error and loaded into the log, that I am xs ...

Thanks in advance for your help.

[legiondark]

Ilyagurow @ 05/27/2014, 12:05

Gentlemen, I have a question, while briefly.
Through the SP Tool I tried to sew, write an error and do not sew. I tried different versions of the program

Here is the SPFleshtul SP_Flash_Tool_v3.1328.0.183 + firmware for it CUBOT_ONE_G800_CUBOT_D1_V0.3_20130716. Then roll up the recovery Cubot-One_Touch_recovery_6.0.4.4 of it you can sew on anything.Download here


Posted on 05/27/2014, 12:34:

Yu.Y. @ 05.27.2014, 09:22

Where is it technically better to install third-party applications on SD or internal storage?

On the internal system memory, but it is not enough 1gig. And so no matter where. It is believed that the internal memory is more reliable and slightly faster. : D But the differences are hardly noticeable, unless you have a flash drive of 2 or 4 classes: D

[Archie26ru]

Yes, Xposed works, but with it I put the Gravity Box.
marcus77777
Version 2.6.1

Post has been editedArchie26ru - 27.05.14, 19:12

[Sergey_Ace]

Archie26ru @ 05/27/2014, 20:10

Gravity box

Well, I think this is the best module for Xposed: scratch_one-s_head:

[MAkSQWI]

[email protected], 16:33

Firmware "firmware_cubotOn_16072013"

Tell this firmware to install via CWM or Flash tool?

[Sergey_Ace]

MAkSQWI @ 05/27/2014, 21:56

Flash tool

This is the drain required to restore the device.

Post has been editedSergey_Ace - 27.05.14, 21:16

[Praeses]

Good day to all!

I ask for help in installing the MIUI V5 RUS firmware by stas2z on Cubot One itself.
The fact is that on the phone, when making calls to / from mobile devices, the interlocutor is not audible (with calls to stationary devices everything is fine). I thought that the best option would be to change the firmware (instead of picking in the engineering menu).
Several times I carefully (very much believe it) read the ways of installing the firmware. With the help of Framaroot received the relevant rights. Nakat TWRP Recovery and he just refused to run. Just hangs on the moment of loading and asks to wait, then the system suggests to disconnect it. About the same thing happens with CWR Recovery. I don’t even guess how to deal with it and what could be the reason for such a reaction of the apparatus.
Thank you in advance for your help.

[ilyagurow]

Legiondark @ 05/27/2014, 12:34

Here is the SPFleshtul SP_Flash_Tool_v3.1328.0.183 + firmware for it CUBOT_ONE_G800_CUBOT_D1_V0.3_20130716. Then roll up the recovery Cubot-One_Touch_recovery_6.0.4.4 of it you can sew on anything. Download here

This is what I get with the firmware of the SP FlashTul

Post has been editedilyagurow - 28.05.14, 07:17

[MAkSQWI]

mitro2506 @ 05.22.2014, 14:03

Vredniiy.Mod.v2.6.1

Interesting axis. What I didn't like was:
1. Quiet ringing sound even when the equalizer is turned on. In firmware

[email protected], 11:18

XPLOR Z 4.3 V1_for_CUBOT ONE_port Legiondark

the sound is much louder not only on the speaker, but also on the headphones.
2. The camera for some reason only 6 MP?
3. Many unnecessary applications (as for me), such as a terminal (many do not know what to do with it), yandex drive, translator, etc.

Tests AnTuTu and Benchmark'a did not have time to test.
Well, it seems so far everything that for a day could notice.

[legiondark]

Ilyagurow @ 05/28/2014, 07:15

What do I get with the firmware JV FlashTul

Battery removed from the body? What is your smartphone and what firmware (version) was from the factory?

MAkSQWI @ 05/28/2014, 08:43

XPLOR Z 4.3 V1_for_CUBOT ONE_port Legiondark
the sound is much louder not only on the speaker, but also on the headphones.

And on the bluetooth: D


Post has been editedlegiondark - 28.05.14, 10:13

[Yu. Yu]

In the phone book, the rightmost column, where the alphabet search can be fixed as it is? Pure xperia z2 firmware

[MAkSQWI]

Legiondark @ 05/28/2014, 10:12

And on the bluetooth: D

Ha-ha-ha, it's funny. In general, I voiced the differences between your firmware and Vredniiy.Mod.v2.6.1 and this is one of the distinguishing qualities. And I wanted her not to finish much, especially the camera.

[ilyagurow]

after 3 hours and dancing with a tambourine, I managed to flash the phone with this SP_Flash_Tool_v5.1408.00 and this CUBOT ONE_D1_V0.8_20140124_MJK. Galku with preloadera shot. The firmware was successful.
But ... now the phone simply does not turn on ... I don’t know what to do and where to dig further.

Regarding the version of the flash, I do not know what came from the factory: D, and the Cubot one MT6589 phone is not turbocharged.



Post has been editedilyagurow - 28.05.14, 12:44

[legiondark]

ilyagurow- took out the battery with the firmware?

CUBOT ONE_D1_V0.8_20140124_MJK - This is the firmware for the turbocharged 1.5 GHz devices, yours that I indicated.


Post has been editedlegiondark - 28.05.14, 12:48

[ilyagurow]

By itself, the battery was taken out, but the one that you indicated is not sewn into any = (

[legiondark]

ilyagurow- try another SPF flasher SP_Flash_Tool_1316 ibid.

Do not help try backup from this postReference


Post has been editedlegiondark - 28.05.14, 12:56

[ilyagurow]

legiondark

I re-stitched with a turbo firmware with a preloader, the phone went up and started working, hurray, hurray. It turns out turbo percent? Although here I look in the specification - the letters T have no model for the model.

Thank you, legiondark for your prompt assistance, I went to smoke the CMW forum

Post has been editedilyagurow - 28.05.14, 13:07