[X]Assistant

[Sergey_Ace]

Cubot One - Firmware
Cubot one
Description | Discussion пїЅ | Purchase пїЅ | Firmware пїЅ

miniFAQ

Drivers and Utilities

• SP_Flash_Tool_v3.1328.0.183
  
• SP_Flash_Tool_v3.1304.0.119
  
• Excellent driver for Preloader with instructions inside
  
• SN Write tool
  
• Android Gadget CDC Driver for SN Write tool

Firmware

Installing third-party firmware, may lead to loss of information, as well as damage to the device!
You take actions in this direction at your own risk!

Comparative table of firmware ratings in different modes
Firmware rating tablesfromlegiondark

пїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

For respected romodelov your themes

Stock Jelly Bean 4.2.1

- firmware_cubotOn_16072013
- One_CUBOT_D1_V0.3_20130716
- One_CUBOT_D1_V0.4_20132311
- One_CUBOT_D1_V0.6_20131009
- One_CUBOT_D1_V0.8_20140124_MJK
- One_CUBOT_D1_V1.5_20140508

- Qumo Quest 474
- Carbon G800_JK808_D1_V0.7_20130716_ repack_by_Legiondark -(Post # 27247493)
- Qumo Quest 474 for CWM
- Official firmware Qumo Quest 474 based on MTK 6582 processor for the Flash Tool
- Backup clean firmware Qumo Quest 474_v0.2_MT6582_4.2.2
- Official firmware Qumo Quest 474 mt6589 for Flash Tool

LewaOS

- LEWA OS 5.0 11/13/22
- LewaOS_5.0_13.11.28S_Turbo_port_by_Legiondark_V3
- LewaOS_5.0_13.12.13_Turbo_port_by_Legiondark
- LewaOS 5.0T_14.01.24 and LewaOS 5.0T + _14.01.24
- LewaOS_5.1T_14.03.21_port_Legiondark
- LewaOS 5.1, 6.0 by alexanrin

MIUI

- MIUI 3.12.13 (JB 4.2.1) by Maximus1a
- MIUI V5 RUS by stas2z(updated post)
- MIUI V5 RUS byDaniil2017(Red Rice port)(updated post)
- MIUI V5 RUS 4.2.23 by stas2z(FULL ROM for SP Flash Tools)
- MIUI V5 RUS by stas2z 4.6.2portmitro2506
- MIUI V5 RUS by stas2z 4.8.27portmitro2506
- MIUI with Red Rice v16portWol_F
MIUI V5.2

Who drives the battery when charging on the phone off

Unpack the archive, and put the file using Root Exporer in the system \ bin folderipod.rar(12.03 KB)
, set the right "G"

ports from the "Brothers"

- KVD K7 Firmware
- Reassembled firmware from KVD K7 v0.1 under CWM recovery
- Reassembled firmware from Tronsmart TS7 Glacier 4GB Clone for Cubot One
- There was Tronsmart, and became Cubot
- Testing Android 4.3

ports with Jiayu G4

- CUBOT-ONE-JG4

Cyanogenmod

- Vowney V5 Firmware
- Cyanogenmod 10.2

Life

- Firmware from Jiayu G4

Android 4.3 in Galaxy S4 style

- XPLOR S4_for_CUBOT ONE_port Legiondark_V4
- XPLOR Z 4.3 V1_for_CUBOT ONE_port Legiondark -(Post # 28623625)

Color OS

- OPPO COLOR OS
- ColorOS Alternative
- ColorOS from Legiondark
- ColorOS by alexanrin

KeleUI

- port of Dakele Big Cola KeleUI

Star S4

- Star S4 port

Lenovo port

- Port with Lenovo S920 + AROMA Installer v1.2
- Lenovo port
- VibeROM Lenovo A820 V1.4 + AROMA Installer from 03/16/2014

SONY (vredniiy_v3.2.1)

- SONY port (vredniiy_v3.2.1)
- Cubot One - Firmware (Post # 31656297) - (Post # 31656297)

MERE_MOD_FINAL_CUBOT_ONE

- MERE_MOD_FINAL_CUBOT_ONE \ Fake 4.4.2 AOSP

SONY XPERIA port

- SONY XPERIA port
- PureXperiaZ2

Port sense

- SENSE NX

iOS6

- iOS6

HTC One M8

- HTC One M8

Philips W8510

- Philips W8510 EXCLUSIVE V.1.0 by DOC2008

Yandex.Kit

- Yandex.Kit

Android 4.2.2 lite

Android 4.2.2 liteportmitro2506

Androlum

Androlumportmitro2506

MUSEUI

MUSEUIportmitro2506

Senseui

Senseuiportmitro2506

X-Mi_Ultimate

X-Mi_Ultimateportmitro2506

NEXUS 5

NEXUS 5portmitro2506

VibeX Rom

VibeX Romportmitro2506

BAIDU OS v6

BAIDU OS v6portmitro2506

General Mobile Discovery Stock ROM JB 4.2.1 v6581 (03/06/14)

General Mobile Discovery Stock ROM JB 4.2.1 v6581 (03/06/14)portmitro2506

Ports firmware from alexanrin

KitKat, based on Cyanogenmod.Deodex for Karbonn JK808
VibeUI v2
KeleUI 2
Cyanogenmod 11 4.4.2 & mod
EternityOS VibeUI 07/16/2016
Baidu v6 alternative
LegoIce 3D UI
Mod L v1.1.1
MuseUI
MiUI su 4.11.21
Alternative V5U
Gravity x
GK-Mod_Lollipop5.0
Exlusive OS
AOSP 4.2.2
Narutofied Stock M
EternityOS v3
Xperia z
Superbean
VibeUI based on Xperia
Nexus stok
MiUI 7.1.26
Lewa OS 7.0
Lewa OS 6.5
RESURRECTION REMIX 3.2.17 style runoff
Resurrection Remix Dream
MOKEE N style runoff
A.I.C.P. Lite
Slim fresh
Nitrogen os

ROOM Karbonn KS808T shot with MtkDroidTools

Instructions

Getting root rights

Attention, these operations are done at your own risk!

Receiving the root and further modifying the system (firmware) increases the risk of rejection of the warranty. Not all service centers can find that the system has been modified, but if you want to visit a service center you need to flash the official firmware.

Rooting (rooting) - the process of obtaining administrator or superuser rights on Android devices, which makes it possible to perform all operations without exception. The main purpose of the routing is the removal of the manufacturer’s (operator’s) restrictions, the manipulation of system applications and the ability to launch applications that require administrative rights.
Questions beginner root user

To get root-rights in one click and without a computer, useFramaroot

Instructions on firmware

Instructions for firmware via SP Flash Tool

IMEI repair instructions

IMEI repair instructions
Repair IMEI

Recovery

Installing and using a recovery, other than the factory, can lead to loss of information, as well as damage to the device!
You take actions in this direction at your own risk!

Recovery (rekoveri) is used in most cases in order to make a wipe data / factory reset (reset to factory settings).
With the machine turned off (not connected to the network or computer), press the "loudness increase"and"turning on". After the image of the lying robot appears, release the buttons - we get to the Recovery menu. Navigating the menu is done with the buttons"loudness reduction"and"loudness increase"action confirmation - button"turning on".

ClockworkMod recovery (CWM)(only for devices purchased in 2013 (firmware 0.3-0.6))

What is CWM?(FAQ)
How to install CWM and make a backup

TeamWin (TWRP)(only for devices purchased in 2013 (firmware 0.3-0.6))

What is TWRP?(FAQ)
How to put + instruction (2.5.0.0)
TWRP 2.6.3.0
TWRP 2.6.3.0 for QUMO QUEST 474 (MT6582)

MIUI Recovery(only for devices purchased in 2013 (firmware 0.3-0.6))

What is MIUI Recovery?(Author's page (eng))
File itself

Carliv Touch Recovery(only for devices purchased in 2013 (firmware 0.3-0.6))

Carliv Touch Recovery 6.0.4.4

ClockworkMod recovery (CWM)(only for devices purchased in 2014 (firmware 0.7-0.8))

What is CWM?(FAQ)
Also install via MobileUncle Tools

Post has been editedSergey_Ace - 16.03.17, 13:08

Reason for editing: Resurrection Remix Dream

[parom]

Barda01 @ 04/01/17, 05:53

Zalman99, Dear in your situation, nodo select boot.img, if you guess everything will be ok. .

Does not guess ...
"My" "Cubot" (MT6589 1500Hz) is sewn via FlashTool only "Cubot ONE Turbo_G800_CUBOT_D1_V1.5_20140508_MJK_Android 4.2.1"
Backup (TWRP) Boot-a of this particular firmware then restore to other firmware.
Part - works.
All Lewa and Color need to rebuild the boot.img included in the firmware with editing installation scripts.
It seems so.
But this is not a reason to quit this business. I have so far stopped on KeleUI V1.5.7_for_Cubot One_port Legiondark
It has a suitable memory allocation algorithm and an acceptable FM sound level.

Find another solution - share your advice here. Good luck!

Post has been editedparom - 10.04.17, 19:23

Reason for editing: ochepatka

[Barda01]

parom, paromDear, I already wrote above that all the ports that are in our subject, with the exception of some, are not suitable for our device, since They are made on 1.2 percent, and according to which scheme I did it, as described earlier, and with respect to the ports, who likes what. If you're wondering how the port is going, then my advice is to be patient and study topics. : rofl:

[Rearnal]

Do people have firmware for qumo quest 6582 android 4.3 and higher)?

[densh9]

Good day.
I can not find custom firmware for my Karbonn KS808t MT6589 1.51GHz.
Root is, cwm set. But neither Lyova, nor Miyui, nor the others work. Hanging on the robot green. It came only stock, taken from another site

https://www.youtube.com/watch?v=MGOg-TvWpzc

, which was sewed through the SP Flash Tool v3.1328.0.183. But the firmware is as miserable as it was, and now the smart has been defined as Cubot with its recovery - screenshots

Just in case, the firmware at this address

https: //drive.google.c...BRblk5MFIyTmRrTjg/view

Please tell me the working custom firmware for my phone.

[alexanrin]

MiUI O v.Anim

Gathered from boredom, finding his old boyfriend. :)
Deodex firmware, for rekoveri, with Aroma installer, for MTK 6589, x1200, is based on Miui 5. Since The new kernel never appeared :-(, tried otherwise to move away from boring standards. In the firmware, most of the iconsAnimated , the interface has been slightly modified, added operator logos to the font (in order for logos to be available, in the Google keyboard settings, in the Languages ​​settings, select Bengali (India) language). What else, I do not remember, most likely, it does not matter. :) I can’t say about stability and autonomy, because I’ve killed the phone and I don’t use it. T.ch. ...: umnik: If interested, try, or disassemble for parts. : rolleyes: All the Good.

Small screenshots

Firmware itself (onMega)

https://mega.nz/#!5spi…jinrCUhebpVNI00g3gVtl8

Post has been editedalexanrin - 08.03.18, 15:44

[Barda01]

alexanrin, Well done!, And I hope to eat others,: rofl:

[Barda01]

alexanrinThe time will definitely make your last, I will drive and accomplish your goal, now on your eternity os, asking for a class, there is nothing more to say, well, see you soon. : clap:

[swoy45]

Rearnal,Unfortunately no. There is MIUI v5, but it is also on 4.2.

[jikaw25]

Firmware 1.5 in the cap did not go. There is sound and light, there is no image.
I tried to sew the third and fifth flash tool. I rolled it back to 0.8 and it all worked.

Post has been editedjikaw25 - 03.09.17, 16:39

[Barda01]

jikaw25Good, you have the body of the old revision, and therefore did not go.

Posted 09/29/2017 at 15:59:

jikaw25, and even try to flash 1.5 then not including the body from your 0.8 to flash 2 partitions boot, uboot, it may work, I have such a number with a bang.

[mazanakissekas]

Good day to all. In general, there is still such a method of restoring a wiped nvram with the subsequent restoration of imei. You just need to create a backup of the nvram via the terminal by typing the command su then dd if = / dev / nvram of = / sdcard / nvram.img. That's all))). We recover through the same terminal by typing su first and then dd if = / sdcard / nvram.img of = / dev / nvram. The main timeout of the display is about 10 minutes, since this backup will weigh about 3.5 GB and if the screen goes out during backup or restore, the smart will hang and not unlock. Thank you all for your attention.

[Senk0n]

Miyui on him norms? Does the battery not eat too much?

[Barda01]

MIUI is normal for him, the first 2.3 days are sweat norms. : yes2:

[overmorth]

tell me what to do - there are new models made by a cast-up sensor and a display from one s (4.7 inches, IPS, resolution 960x540 pixels)
There is a jk808 with a broken sensor and a display (IPS, 4.7 "16000K colors, HD (1280 x 720)
ONE S display shows black
It was found out by experience that the ONE S sensor is working - on the cracked display you can see if you plug it in, and all this is obviously of a different resolution, since the touch trace is clinging to the broken display only 2/3 of the area
how to start the display from ONE s to work and change the resolution
There is no root on the device and nothing is visible at all, mb who will tell or throw the assembly suitable for jk808 but with a defective resolution?
what dpi at one s I don't know either -
I suspect that the build from ONE S will not come here because there both the camera and the processor are other poor
There are no displays from the original anywhere. :(

[Pavel4402]

Tell me how to determine which firmware is suitable, and which is not. From the firmware in the header, some are no longer available, the files are deleted. The only thing that happened to flash it is with the firmware One_CUBOT_D1_V0.8_20140124_MJK via flashtool, the rest write errors. As a result, the smart screen loads and a gray screen, although there is sound and a response to the sensor. I tried different versions of the USB flash drive, but to no avail, it gives errors.

[MasterFISHER]

Does anyone use android lite 4.2.2? A good firmware only one bug strains: "an error occurred in the graphical interface of the system" and the wallpaper flies. happens when the charge drops to 15% and below. How to win?

P.S. Charging was connected - it disappeared, disconnected appeared again. It seems that there is a lack of prog type charge dropped - connect the charger. Maybe somewhere you can edit some lines in some kind of system file, in which direction at least dig?


Post has been editedCusco - 28.05.18, 13:34

Reason for editing: Spoiler

[v-i.king]

Pavel4402 @ 4.04.18, 21:04

Tell me how to determine which firmware is suitable, and which is not.

You can find out by checking the phone, and then sew the firmware for your revision.

[wizzy]

Do you need a firmware with a redistributed memory? 2 GB per application, not 1 GB
8GB version.

Post has been editedwizzy - 18.10.18, 21:52

[wizzy]

mitro2506 @ 09/01/14, 01:30

Kustanaez
To restore, we need: root access and Android Terminal Emulator.
File donor nvram.img throws on the built-in memory of the phone.
You start the terminal and enter the command SU (write in the black window of the terminal SU and press on the keyboard the input - Enter). The SU command is used to confirm that the terminal uses root rights. If you do not enter SU, then when the backup message comes Permission denied, and no backup will not work.
In the terminal we write the following:
dd if = / sdcard / nvram.img of = / dev / nvram
After recovery, do wipe data in CWM recovery

Attached files

nvram.img (5 MB)

unfortunately it didn't work for mekilled the caller, but it turns out I used to make a backup myself through the droid tools earlier and now the recovery worked there.

Posted 12/29/2018 21:37 PM:

Yurij_1 @ 12.25.18, 15:21

Lay out please!

You throw this file into the folder with the firmware under the sp flash tool and select it in the sp flash tool instead of the native one, flashing it and there will be 2 GB more memory for the program. Never flash the application and always make NVRAM backups via MTK Droid tools, well, other backups are needed.

Attached files

MT6589_Android_scatter_emmc with increased cubot one.txt memory(526 bytes)
ONE_862070021259874_nvram_140123-205229.tar(3.39 MB)


Post has been editedwizzy - 30.12.18, 01:50