[X]Assistant

[arxangel29]

iPhone 4s пїЅпїЅпїЅпїЅпїЅпїЅ 4013 пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

iPhone 4s 16Gb PCT
Firmware:iOS 7.1

Jailbreak: Not
Description of the problem:
Good afternoon. The phone was off regularly in the charged state, after which it stopped turning on. When you try to turn on: the screen with the logo flashes periodically. Indication of low charge, but not charging from the network or from the computer. The cable is original.


There have been actions:
When trying to restore from Recovery mode = error 4013. DFU = similarly. In both modes, itunes sees the phone in recovery mode, but the process is interrupted with the indicated error. Now when you turn on (or connect to the charger), the phone immediately shows Recovery mode. Unambiguously service or still compete?

[rukorez]

Help
Updated iPhone 4s on ios 8.1
I took off the lace on the screen, I try to restore it in aytyuns, I write error 4013
I tried all the options offered here, the freezer helped
Only after the firmware has been installed an eternal apple appeared (an apple appears for 10 seconds, then it goes out and appears again, and so in a circle)
I do not know what to do
Maybe the phone managed to warm up or what? Advise

[sasha7408]

similar problem.

[rukorez]

Found a small solution to the problem.
I put the phone in the freezer again, on which the firmware was already installed, which was in perpetual apple mode
After 30 minutes I got it, I look at the activation window, I was already delighted, I think it's cool
While activated, warmed up and on the desktop I started up first, stopped responding to the buttons, only the device restart helped, after which, again, that same eternal apple ....
Probably a problem at the level of iron, but what exactly I have no idea ......

[senia2]

I have a similar problem, I don’t know what to do, the refrigerator helped to flash it again, but then the problem also hangs and reboots on an apple

[BAXik]

Similarly, there was a problem with error 4013, then error 9 took off. I pulled out the tray with the sim card from the phone and it was flashed without problems;)

[xxCTAHOKxx]

It was the same, 4s, error 4013, before it hung on an apple, rebooted and so on in a circle.
I helped the NAND reball, or at least try to warm it with a hairdryer. Good luck;)

Post has been editedmaxipon - 13.09.16, 15:48

Reason for editing: Images under the spoiler ...

[gladkiy7]

Fully agree with xxCTAHOKxx. I bought a phone, iphon 5 16gb, error 4005, 4013, thought for a long time and conjured over the phone and firmware. In the end, I decided to disassemble and heat nand, to be honest, the protective screens on the mother were rather difficult to take off at home ... Well, I warmed up (the main thing was to warm up, squeeze with paper or something else a chip to connect), assembled, sew .. .. Error 16 (in the middle of the firmware ((I tried it a couple of times, nothing ... Then I decided to change the cables and URA, everything was restored;) So it can help someone, at your own peril and risk) I was still warm before my mother that to check what temperature will not damage the motherboard (heated to 240-250, no more, and rivers 220)

Post has been editedgladkiy7 - 29.01.15, 01:06

[gladkiy7]

In principle, everything is recoverable if there is a hairdryer or a soldering station, e;) a card holder, and skilled hands))

[AsusTF2013]

Good day. I was helped by this.

brought Iphone 4s with a problem can not recover as it gives error 4013.

I plugged it into my computer started to restore there was the same error.
tormented him for 2 days I tried a bunch of train, acb, cords, computers.
in the end, I changed the WI FI chip. and everything went like clockwork. vosstanovilis the first time. no mistakes.
Thanks for the attention can this method help someone. ;)

[seleckiy]

They brought 5-ku, shows a cable with a red tuna icon. When flashing from any mode, error 4013. Disconnected the display, the upper loop did not help .. I think to warm the nand or put it in the freezer?
I sew the original cable, I also tried a copy, the error does not change. Ports changed.

Post has been editedseleckiy - 05.05.15, 14:51

[neorum]

the freezing for 20 minutes helped, through DFU and Recovery it was not sewed

[FeLiX-911]

There was also an error 4013, removed the top cable (left and left the display), flashed without problems, I connected the top cable and again the apple, then the red screen and in a circle, I put error 4013 on the firmware again.
Experts tell me this is a 100% problem in the train? what can we do with him? Under the replacement ???

[Topir]

Freezing works Verified !!! Iphone 4 was sewn!)): Yes2:

[iaQua]

Hello to all! Trying to fix your new iPhone 5C (or rather the GPS module in it) put the phone into DFU mode (exactly in it, not in recovery) and now every time an attempt to restore it, error 4013 pops up. 20 minutes cooling in the freezer did not help. I do not even know what to do next.

Solved a problem!Surprisingly, it helped to bring the phone out of this mode to the usual ancient program iREB.

Post has been editediaQua - 25.06.15, 20:39

[Fr2014]

Help guys, in iPhones oak oak ..
iphone 5s

After the update (updated girl), the cord was stuck out and the aytyuns gives error 4013 ..
what it can be, really reanimate it? (I haven’t tried to freeze, because I don’t know what to do then and I don’t rummage in restoring and updating) who can help or write in LS)

[Fr2014]

In the service, they said that the problem with the controller and the loop on the display, if you disconnect it, will it be possible to flash it?

[slashok]

I didn’t particularly steam myself. I pulled out the battery, nepnevaya warmed up the board from the end face at a temperature of 300 grams, so that the body became noticeably hot. I quickly assembled it, pushed it to the Tuna - it took the strip and escaped, and was activated. I understand that it does not pass for a long time. in Warsaw, no one will roll the flash drive. This is not paid for in our service. Is it possible to redeem AFON 5S from the client and do yourself in your free time. And redeem it for 600-800 PLN (max. 200 euros somewhere). Well. Summary - error 4013, flush / process dump.

[kokay09]

Disconnected all plumes from the board and the error 4013 was sewn

Post has been editedkokay09 - 06.10.15, 15:32

[Xcradex]

Amigo76 @ 10/06/2014, 21:44

The fridge did not help ......
He writes such a crap on the screen. And the errors come up 4013,4005.
[attachment = "5191039: IMG_0234.jpg"]

I have such crap with 5koy was it either a dachik of approach or a front camera. Turn off the display and the acb for a half hour inode needs more. Then heal the acb and turn it on if it doesn’t turn on. We repeat the procedure. We disconnect the acb. We wait for 30 minutes. To check connect another display

[Vitozz]

Also the same crap climbs

The freezer did not help

Post has been editedmaxipon - 13.09.16, 15:46

Reason for editing: Images under the spoiler ...