instructions sent by their technical support
who did not understand the screenshots:
1. install the driver
//savagemessiahzine.com/forum/d...staller_v1.1228.00.rar2. Download the program SP_Flash_Tool - flash driver for smartphones based on MTK. (it is desirable to sew with a program version higher than the fifth (5), the current version is always in the program topic)
3. run and there options --- DA Download All --- Speed ​​--- Do not select Tick it
options --- DA Download All --- Batery --- wich Batery SET THE TICK (if not active / gray, do not touch)
4. Select the Scatter file from the firmware that you downloaded
5. Tick on DA DL All wich Check
6. Click Firmware upgrade
SP_Flash_Tool is the flash driver for MTK smartphones. the whole process is explained in detail in this topic, if errors occur or no firewood is installed, we are looking first there
All firmwares are "sewn" on the phone this way, unless another method is specified
___________________
SP_Flash_Toolabove version 5 1. and 2. similarly
3. option-connection- in the USB section, select Higt speed and auto detect
4. option-download - there is a tick
5. on the Download tab, select Scatter-loading and install the firmware method Firmware-upgrade
6. we connect the switched off phone and we press Download
___________________
Instructions for firmware via CWM
1. Download the firmware to the root of the flash drive
2. Reboot the phone to rekoveri (We press the power button, there is a "reboot - recovery)
3. Go to "wipe data & factory reset" (complete reset of settings and data, while clearing the / data and / cache sections in the internal memory of the device and clearing the system folder ".android_secure" on the memory card) and confirm
4. Go to "Wipe Cache Partition" (clearing the cache partition in the internal memory of the device) and confirm
5. Go to "Wipe Dalvik Cache" (clear Dalvik cache) and confirm
6. Go to "mounts and storage / format cache / format system / format data /" and confirm
7. Go to "install zip from sd card / choose zip from sdcard" and choose your firmware from the place where you put it
8.We are waiting for it to be established.