[X]Assistant

[directorgeneral]

This topic discusses only ways to bypass the Activation Lock (hacking)!
Ways to completely disable the Find My iPhone service are discussed in the topic.I can not activate, requires Apple ID

At the moment, AppleID lock can be bypassed on the following devices:

• ipad cellularby dropping out a resistor. Read more in the topic.Iron bypass method iCloud only on iPad Cellular
  
• iPad2with firmware fromiOS 7.0 to iOS 9.3.4through the server MinaCris-a. Instructionlook here.
  Hours of the server check on twitter@minacrisOficial(link is clickable)
  
• All deviceswith firmware fromiOS 7.0 to iOS 7.1.2through the server MinaCris-a. Instructionlook here.
  Hours of the server check on twitter@minacrisOficial(link is clickable)
  
• iPhone4
  
  • Apple ID bypass on iPhone4 (Windows) + Tinymbrella
    
  • Apple ID bypass on iPhone4 (MacOS)
    
  • How to make a full dialer
    
  • IPhone4 Hacking Software
  
  

Note:

• There is no complete bypass for iPhone! You can only make an iPod with SMS reception from it, it will not work to call from it!
  
• After upgrading the firmware, the hacked devices require AppleID again. Those. Bypass Activation Lock is temporary, on Apple servers, as the device is locked, it will remain.
  The exception is iPad Cellular, in which a resistor has fallen out, you can safely switch to a new firmware version, because Apple will see the device as new.
  

AppleID bypass services and general user opinion about their use:

Attention!
The forum administration is in no way associated with the below mentioned people offering unlocking Apple devices!
Any of them can not perform the declared service and not refund you!
Therefore, the entire responsibility for the decision to transfer funds lies only with you.
Think three times before ordering someone unlock!

---
@MKS_UNLOCK- there are a lot of positive reviews, but recently they wrote a message that a person is missing, does not unlock the device and does not respond to the people who ordered the service from him.
@ 7HEB0T- there are positive reviews
@Aicloudunlocker($ 100 - iPad 3g, $ 20 for an iPad WiFi, the account owner says that he can unlock the iPhone) 3 days passed otvyazki no. "
@ jiangbo2571($ 10 - reviews are contradictory: some tell someone unlocked quickly and inexpensively, someone is free, others say that he does not answer and did not unblock anything)
@iCloudHotRemove- there is one positive review
@iFreeiCloud- there is one positive review
@fresh_unlock($ 8) - very controversial reviews. Some say that the scammer, although the forum has a few people who he unlocked the device in a short time after the work performed.
---
Unverified
@Spainicloud
---
Fakes
iCloud Remover tool - a program supposedly to unlock AppleID. In fact, it turns out to be empty.
https://www.youtube.com/watch?v=FZ8YKvS1aX0
https://www.youtube.com/watch?v=caDYprf-Af8

Post has been editeddirectorgeneral - 03.10.16, 12:42

[rocos]

I'll clarify a bit ... I activated through minakris with a sim card without a pin, then I took out a sim card, inserted it into another body, turned on the PIN code request. Then I inserted a sim card with a pin into the iphone. He asked for a pin. Entered and as soon as he wrote that the pin ok immediately took out the sim and inserted it back. Tel wrote that the sim was blocked but there was an OK button. Click OK and set up your iphone as new ...
Fix it in the cap if not difficult ...

K

In a hat

Post has been editedBlack fish - 19.05.14, 04:39

[Dmitryipr]

Iphone 5 activation video with a sim pin duplicated on YouTube, who is too lazy to download:
http://www.youtube.com/watch?v=Dca2QCTjL_0

K

In a hat

Post has been edited- = RealMan = - - 13.05.14, 14:45

[Winkarbik]

Apple ID bypass on iPhone4

1. Download archive -http: //savagemessiahzine.com/forum/dl/post/4663172/bypass.zip
   
2. Unpack it.
   
3. If there is JAVA, then go to the next item, if not, then set -https://www.java.com/ru/
   
4. We connect the device in DFU Mode.
   
5. Run the file ssh.jar in the unpacked archive and wait until the inscription comes out -
   login: root
   password: alpine
   
6. Open WinSCP and write:
   Host Name: 127.0.0.1
   Port Number: 2022
   Username: root
   Password: alpine
   
7. 2 windows in one will come out in front of us (as in Total Commander) click on the black square above (if you bring the mouse, the open terminal will appear) if a window pops up with a warning, we click ok.
   
8. In the top line we enter - mount.sh after that 3 lines should appear that everything was mounted.
   
9. On the left, open the unpacked archive, and on the right, click the points until we are at the root of the system.
   
10. On the left, open the folder bypass 3. * (the asterisk is the version of your iPhone, 1322 was written on my back of the cover, I opened bypass3.1 accordingly) and drag 2 mnt folders to the right while agreeing to replace.
    
11. Now reboot the iPhone, holding power + home.
    
12. The device will turn on in recovery mode, open TunyUmbrella, select your device and click Exit Recovery.
    
13. Now without SIM and Wi-Fi we set up the iPhone

P.S. I wrote from memory, because the iPhone was not mine.
P.P.S. The connection will not work (Or maybe it will, tested on your dead SIM, write down this item.)

K

In a hat

Post has been edited- = RealMan = - - 04.06.14, 13:48

[alezhal]

I saw instructions for bypassing Activation Lock for iPhone 4 for Windows ...., the one who did at least once will figure it out, the rest will flood the topic.

пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅ-пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅ download

OS X:

Everything you need in the archive:Bypass.zip(10.14 MB)

1. Ideally, a clean iOS should be installed.
2. Connect the device to the computer
3. Run ssh.jar
4. Enter the device into the DFU at the invitation of the terminal (enter like this: hold Power + Home and wait for the screen to turn off. Start counting 4 seconds and release only Power. Hold home until the moment the lines run in the terminal

5. Expect these lines:

—— now you can use your favorite ssh client, for Windows I suggest WinSCP, for Mac OS X — Fugu ———
6. Start the terminal and type: ssh root @ localhost -p 2022

7. Type the following command: mount.sh
8. Open the ssh client - Fugu, for example, and connect:
Connect to: localhost
Username: root
Port: 2022
Click Connect and in response to a password request, type alpine

9. Go to the root directory (folder, “/“) and see the necessary

10. Then just transfer to the root directory (i.e., you will see mnt1 and mnt2 among others) only mnt2 (Lockdown is in it) from the archive - during the transfer, several files will be replaced agree Overwrite All
11. Then, in the terminal, type reboot_bak (or just hold and hold Power + Home before rebooting) - the device will restart, but will not finish, the iTunes icon and USB cable will hang
12. Run Tinyumbrella and click Exit Recovery.
13 From iTunes there will be a question about trusting your computer, click “trust” on both the computer and the iPhone.
14. Set up your iPhone as usual.

The SIM card can be in the device, WiFi is naturally turned on, as during normal activation.
Everything will work for you except the cellular network.
I advise you to use your current AppleID when setting up, then you will receive mail over WiFi and notes / contacts / bookmarks will be synchronized between devices, etc.

M

Added to the header

Post has been editedAlexxxl - 06.06.14, 13:04

[oleg191470]

WinKarbik @ 06/04/2014, 10:38

The device will turn on in recovery mode, open TunyUmbrella, select your device and click Exit Recovery.

The archived version refused to work.
Error "Exception in thread" AWT-EventQueue-0 "java.lang.NoClassDefFoundError"
ATthis topicprompted to seethis optionsolutions.
I have earned the attached version of the umbrella

K

In a hat

Post has been editeddirectorgeneral - 17.08.16, 08:38

[ayayo]

How to make a full dialer

Regarding the 4-ok and other models, which managed to put the Jail after activating Dolci (you can do without the Jail) and make the "ipod", as well as those locked to the operators, the detachment from which is not possible:
You can make a full dialer, with only one inconvenience in the form of additional pribludy in your pocket / bag. We are talking about Bluetooth devices through which you can call even from ipod / ipad.
There are a lot of them, for 1/2 SIM cards, cheap / expensive, requiring jail and jail fries.
For example:

• Apple Peel payqi dual SIM iOS 8
  
  
  
• GPFile mini
  
  
  
  
  
  Dimensions: 46 Г— 54 Г— 11mm
  Network: GSM 850/900/1800 / 1900MHz
  Talk time: 5 hours
  Standby time: 70 hours
  Bluetooth protocol: V2.0 / 2.1
  Operating distance to: 10M
  Interface connector: Apple
  Operating modes: Calls, SMS, GPRS
  Supported firmware: starting with iOS 4 and Android above 2.5
  
  To use the need for standard headphones from Apple (headset with microphone)
  
  On iPod Touch, iPhone and iPad, you need to install the GPFILE application via Cydia, for this you need to add a repositoryhttp://apt.gpfile.com/gpfile
  
  

For those who have a jail, and these are all hacked 4-ki, there is a very budget option with Konnect tweak ($ ​​12 seems to be worth it), but you can check it for free by installing a tweak on any phone with a jail.
(In the free version, all functions work, only when you call you can not hear)
We take absolutely any old phone with bluetooth (ideally, you can buy a Chinese watch / phone) and connect it via bluetooth to your iPhone / ipod / ipad. The iPhone will make and receive calls through another phone, that is, you connect to any device that has Bluetooth and a SIM card is inserted, and the iPhone acts like a Bluetooth headset with control.

K

In a hat

Post has been editeddirectorgeneral - 17.08.16, 08:39

[kharkov2018]

here is the software for hacking iphone 4
checked by me personally and more than once
To work, the software needs to be installed java on the PC
1. Enter the device into dfu; we launch the file from folder 1; it will go through the process and at the end we will see a green port
2. install the program from folder 2 run it
3. in the field "host name" we drive in localhost
In the field "port number" we drive in 2022
in the field "user name" we drive in root
in the "password" drive in alpine
press login
3. start the software, select the terminal icon and enter the command mount.sh
mounted partitions

on the mnt1 // Applications path, delete the Setup.app folder
then copy the files from the archive with the replacement paths as indicated in the folders

close WinSCP

4. reboot the device with 2 buttons home and on and we get the rekaviri mode
launch the program from folder 4 and remove the device from recovery mode

All we get is a working hacked device

hactivation iphone 4.zip(8.57 MB)


The request to the moderators to add to the header and select it.

[email protected], 10:44

Maxmik.euroset, which is you for which model? 3.1, 3.2 or 3.3?

CDMA devices didn’t come across, but 3.1 and 3.2 were excellent hacktivating, and in the same way, the devices that were not yet flashed and password-protected with a password and could not find the password (using another software) got the apple id mail from the Accouts file.

K

In a hat

Post has been editeddirectorgeneral - 17.08.16, 08:39

[zemeroff]

Layfkhak: put the Twitter application on the phone, register and subscribe to these people here Minakris -https://twitter.com/minacrisOficial(owner of the workaround) andhttps://twitter.com/jesusprat_(xs who he is, but his server information is always up to date). On both set an alert when the message (golden star). If it is bad with English, then under each message in the official Twitter client there is a link Translate from English.
Stay tuned, write infrequently and specifically.



When the notification was peeped once again, something like "started the server, corrected errors" was clearly written in it, reached the screen with the id request and connected to the computer, opened the aytyuns, resolved the aytyuns request to the unsigned server, the message appeared in English on a gray background (the meaning of the inscription is your request in the queue, do not disconnect the device, wait a long time), waited about 3 minutes (no windows with errors were found), on the ipad the id request was replaced by setting the geolocation services ... All

K

Fixed

Post has been editeddirectorgeneral - 17.08.16, 10:23

[ia.d]

Can anyone do the instruction in Russian ?!https: //webcache.googl…=1&hl=ru&ct=clnk&gl=en
Servers do not work yet.

[djzveruga]

Instructions for Hacking through Minacriss Server

Required:
- PC / Mac to unlock the device.

- Second PC / Mac for jailbreak, or just a virtual machine (for example, Windows on VirtualBox.HereThere are instructions for installation and configuration.)

- iTunesthe lastversion.

- Program iCl0ud7xTwek which you can download forOS XorWindows .

ForMacosxwe enter the following in the terminal:

# chmod + x iCl0ud7xTwek

# ./iCl0ud7xTwek

Unlock process:
Add these lines to the hosts file:

138.128.167.6 albert.apple.com
138.128.167.6 support.apple.com

MacOS: / private / etc / hosts
Windows: / Windows / System32 / Drivers / etc / hosts

Now download iCl0ud7xtweak from here:

OS X

Windows

Run the program and wait until it detects the device (the window closes itself).

After that, we send a tweet to minacriss with the udid of our device and wait for confirmation from @minacrisOficial - @Kosmakis - @ Ni8tW0lF. After receiving confirmation, we launch itunes and follow the instructions.

Remember that itunes should be the latest version!

Press the Bypass button, wait for activation, and configure the device as new. In order for the bypass not to fly when the device is restarted, do the following:

Mac os

We put jailbreak.


Step 1: Download the latest version of Pangu byreference

Step 2: Connect the device

Step 3: Install Pangu.dmg

Step 4: When the device is defined - click "Start jailbreak"

Step 5: Pangu will ask to open Settings>Main>Date and Time and ask to disable the automatic setting. Next, set the date for June 2, 2014

Step 6: As soon as the date is set, the jailbreak process will start automatically. When needed, click on the Pangu icon on the device's desktop. Click the icon>Continue

Step 7: We are waiting for the end of the process.

When the device reboots, disconnect it and connect it to another PC that is configured to activate (bypass again to continue the jailbreak) or switch to a virtual machine with a device thrown into it and do the following:

Throughanother computer :

Copy the lines to the hosts file.
Run iTunes
We are waiting for the server's welcome window, if it is not highlighted - restart iTunes
Click the bypass button
We are waiting for the end of activation
When the device is activated - we block it (the shutdown button), unplug it and plug it into our first pc on which the jailbreak process was started

If you chose Virtualbox:

We start the virtual machine together with pangu and wait for the device to restart:

In the VirualBox window click Devices>USB Devices>(we choose the necessary device from the list)
Copy the lines to the hosts file.
Run iTunes
We are waiting for the server's welcome window, if it is not highlighted - restart iTunes
Click the bypass button
We are waiting for the end of activation
When the device is activated - block it (the shutdown button)
We press devices Devices>USB Devices>(remove the device from the list)
After reboot, unlock the device

Step 8: When the jailbreak is installed, you will see the Cydia icon on your desktop

Windows

Jailbreak for iOS 7.1.x via Pangu 1.1 on Windows



Step 1: Download Pangu 1.1 for Windows byreference

Step 2: Connect the device to the PC

Step 3: Open Pangu_v1.1.exe. If the blue window pops up, click the launch anyway.

Step 4: When the device is determined, click Start Jailbreak

Step 5: Pangu will ask to open Settings>Main>Date and Time and ask to disable the automatic setting. Next, set the date for June 2, 2014

Step 6: As soon as the date is set, the jailbreak process will start automatically. When needed, click on the Pangu icon on the device's desktop. Click the Pangu icon ---->Continue

Step 7: We are waiting for the end of the process.

When the device reboots, disconnect it and connect it to another PC that is configured to activate (bypass again to continue the jailbreak) or switch to a virtual machine with a device thrown into it and do the following:

If you chooseadditional PC / Mac :

Copy the lines to the hosts file.
Run iTunes
We are waiting for the server's welcome window, if it is not highlighted - restart iTunes
Click the bypass button
We are waiting for the end of activation
When the device is activated - we block it (the shutdown button), unplug it and plug it into our first pc on which the jailbreak process was started

If you chose Virtualbox:

We start the virtual machine together with pangu and wait for the device to restart:

In the VirualBox window click Devices>USB Devices>(we choose the necessary device from the list)
Copy the lines to the hosts file.
Run iTunes
We are waiting for the server's welcome window, if it is not highlighted - restart iTunes
Click the bypass button
We are waiting for the end of activation
When the device is activated - block it (the shutdown button)
We press devices Devices>USB Devices>(remove the device from the list)
After reboot, unlock the device

As soon as the process is over, you will see the cydia icon on the desktop of your device.

Install tweak for permanent traversal

To do this, run Cydia, press sources and add this source:

mcxserver.com/repo/

Next, install the mHooker tweak.

Reboot the device and activate it again.

If you did everything right, your device must be successfully activated.

[Denis24]

djzveruga
and the network will work? : blush:

[djzveruga]

Denis24,
No, it is also not known when the server will work.

[iClouder]

I entered the list of 103 devices that bypassed that night. Here are the proofs. IPhone 5th 7.0.2.
Network only incoming calls and SMS with USSD. No operator name. Tweak did not install because the installer installed the DJ system. Do not try to do it at 7.0!

Attached images

Post has been editediClouder - 02.08.16, 23:57

[papa3023099]

Good day to all.
My question may be banal and stupid, but what to do; D
How to find udid device? (4s)
And yes, as far as I correctly understood at the moment the Minacriss servers are now lying? (I decided because 404 was knocked out in tuna when the device was connected)

[Re2sgsII]

Papa3023099 @ 08/07/2016, 21:38

How to find udid device? (4s)

See here

[fireghost]

Papa3023099 @ 08/07/2016, 20:38

How to find udid device?

connect the device to your computer
On Windows, open the device manager (wines + pause and select it there, 7-10 on the left),
In the list of devices, open USB controllers,
open the Apple Mobile Device USB Driver,
in the window the tab information, in the property field, select "Path to the device instance (2nd option),
in the field of the Value field after the second backslash (USB \ VID_05AC & PID_129F\7B .....) 40 hexadecimal numbers is the required udid.
in my example after PID_129F \ further udid ->7B .... and further, only 40 characters

Post has been editedfireghost - 08.08.16, 15:06

[nykini]

Did at night through the server 5s. All of the instructions, only after installing tweak activation is no longer requested. As a result, the iPod. Calls do not want to call, call timbolia, sms do not come. Who did what you did? Should the calls work? They have written full bypassed, I understand that it should work completely.

[arturkrasnoyarsk]

And I did not have time today, servers closed.
Must work on all mobile devices iOS 7.0-7.1.2 and all IOS only for iPad 2.
What is your firmware?
I want to activate my iPhone 6 (I have 9.3.2), even if on an iPod.

Post has been editedarturkrasnoyarsk - 08.08.16, 17:14

[ia.d]

nykiniSimilarly, I also received ipod 5s. The campaign will have to put "crutches" (I bow to Konect from Cydia. Who has any options?

[bakhramoff]

IPhone 6, hanging on the activation lock, read that if you replace the trio (nand + eeprom + baseband) then it can be unlocked. Who tried? Takde is interested in the question, if the activation lock is not hanging, but lost, can it be revived by replacing the trio?