Is there anyone alive in the subject ??
do not tell any stitching to sew at such values ​​on the label
FW Ver 1.11 below
HW Ver 2.00

Twoy angel In another section. You have 4.4 and 4.2 are being discussed

Why can not I log in recowery ????
WIKO lights goes out, and again the same thing.
I ask proscheniya.mne 4.4
Or there is no difference?

Post has been editedbesenok82 - 13.11.17, 14:56

besenok82 , ) besenok82 , You can remember this topic raised here ..Proshil or all without a computer?

Da.sprashival.no I still can not go rekoveri.
Even three lines does not appear to vyborom.stranno all.

I once 500 is already done everything ... where to get this driver?

like i am new to flash

You propose to rewrite your hat here this topic? Everything is written.

Hi after flied on android explay fresh (okirpichilsya) can not seem to flash smart, fleshtul gives an error.
Who knows how to bring the phone to life, help.
sews in Domnload Only mode
error text in photos

Post has been editedklich007 - 30.11.17, 17:49

2yaz12 , Died in flash memory

Well you of topics in the topic of the mosque ?!

If you are in the topic, which originallyASK YOUR QUESTION, entered in the searchthe number of your mistakes, "5069", it is literally in the first row to see the answer. Feel free to use the search engine.

2yaz12 , Try to sew in firmware mode

2yaz12 ,
By the way .. If you'll own the stick solder, instead of the one that stands can to put this H9TP32A8JDMC, working there on ali.A home looking for is not found.

All privet.Hochu offer you another way of IMEI repair.
A small story before.
They brought the body with the flying Imei.
Try to go to recovery, I go (stock) but it does not work.
Ie, the volume rocker, I'm where I need to, and press the On button. but the body is not
executes the command and throws off my screen saver android robot.
I put twrp try to go to recovery but the body is stupid restarts and twrp does not go.
But in the instructions of the cap to restore Imei require modified recovery.
So this method is not suited to me, I began to look for another.

In general, we need two programs it
MtkDroidTools_v253.exe(9.21 MB)
and Chinese prog sn_genimei.zip(7.29 MB)

AND ROOT right on the phone (I was doing the right program KingRoot directly to your phone), and the inclusion of USB debugging in the body.
(Go to settings-about phone looking for where it says the build number and Tapan it 7-10 times and get a new feature for developers.
We go in and turn on debugging for usb)

1. Go to the sn_gen put a tick in her two ?? Signs
and enter your Imei found under the phone battery
and click ?? MPOB_001 ??
MP0B_001 generated file will appear in the folder with the program sn_gen



2. Next go to the program Mtk Droid Tools, connect the body to a computer.
When the program has identified your phone, press the Root button thereby phone must
get a root shell.



There are cases like mine, it is not possible in this way to get software Ruth


and then we come to the aid programmadbd-Insecure-v2.00.apk(734.62 KB)


set it on the body, we allow root access to run and put two ticks


all, now we have to root the body shell /
Reconnects the body to Mtk Droid Tools program, and can be worked on
should now look like this .snizu in the program should be lit green square root shell and written
and become active IMEI / NVRAM button


3.Nazhimaem IMEI / NVRAM button in the popup menu, click Backup button
and we look forward to when the backup is created, and will write a backup where we preserved (usually
It is stored in the folder where you Mtk Droid Tools program BackupNVRAM



4. Next, we pass along the way specified in the program MtkDroid Tools where to save the archive tar. with backups.
open the file (not razarhiviruem and open ) by ZIP Archiver (RAR does not fit they can not flip files into a tar archive)
and we pass along the way: data-nvram-md-NVRAM-NVD_IMEI
and we find there MP0B_001 file and delete it.



Archiver not zakryvaem.Otkryvaem sn_gen program folder and find the file that we generated MP0B_001.
and toss it in a file archiver archiver .All now closed.



5. Go to the program Mtk Droid Tools.
1) Click on the IMEI / NVRAM button and 2) vyskochevshem menu, click Restore 3) will pop up a menu yet
with bin file, select it.



When the bin file is established, another menu will pop up with our prepared archive where we threw the MP0B_001 file
select the file and press to open the start ustanovka.Posle which the program will inform us about the successful installation of these
two such inscription files.


Actually all. Reboot the phone connects to the MtkDroid Tools program and see a picture of a defined Imei.




Post has been editedklich007 - 07.12.17, 11:22

In this manner, when resetting to factory settings, Imei flies.
I decided to still zaborot it.
Threw to the factory imei flew, set root.
Maui Meta launched a program put in prog settings
(Before I tried to restore imei this program, but the program does not pick up the body
I stood Ruth and debugging is enabled on the usb)
Not including debugging for usb connect the phone while holding the volume rocker minus (it did not work the first time)
keep the volume to a sound that occurs when connecting to a computer, and release. (need to try on every minus if it is impossible to stifle plus try and if that does not work we press the On button again probuem.Predvaritelno twitching batareyu.Potomu how the instruction I viewed from this model, there is simply without any clamped buttons to connect the phone and he podhvatyvalsya.Znachit not at all so the unit receives)
Will splash on the body and the program will determine in a few seconds the phone.
Well, after all of the instructions in the header.
This I mean that if someone Maui Meta program does not pick up the phone is not out for drivers and for some other reasons
as it was for me. I hope someone can help.

hello people! died my pipe, and well initially been dropped and, and the screen broken screen changed and now this crap when switching ON, Thu MOBILE drizzle at first gives an error "idikatsii smartphone sbrost nastroiki to standard" sensor is not Robit and comes in rekeveri decided to sew all downloaded fleshtul drove the red line then lilac then gave an error (5069 or 8045) tried different ways and with batteries and without a few firmware, different fleshtuly result of one
memory test has given

Dyusha0099 ,
With the memory of all right

19Serj80,
fleshtool error 5069 do you think will help the TA ?? in principle, nothing to lose should try ...

atame , I think no.

atame ,
Try