[X]Assistant

[@ l e k s]

MTS 975 - Firmware (OS 4.1.1 - 4.2.2)
MTC975, Alcatel One Touch 5035X X'POP
Description | Discussion пїЅ | FirmwareпїЅ

Drivers and Utilities

• Drivers(For firmware, etc.)
  download
  
• SP FlashTool(For firmware.)
  download
  
• MKToolDroidTools- to remove backup NVRAM, etc.
  download
  
• Imgxtractorfor unpacking firmware files in EXT format (for example, system.img and custpack2.img)
  download
  

Recovery and Boot

• TWRP
  download | TWRP FAQ
  
• CWM
  download | CWM FAQ
  
• Kernel "SpeedMod Kernel" for MTS 975
  description and download
  

Of.Firmware and FullBackup

• Of firmware (4.1.1)
  download
  
• Official MTS firmware for Recovery
  description | download
  
• Full BackUp 2 by drondronnord
  download
  

FullBackup - This is a complete copy of the firmware from the phone.

Unofficial firmware

All unofficial firmware must be installed from a memory card.
Victoria
LolliFox
MIUIv5 (Android 4.2.2)
MIUI v5 (Android 4.1.2)
Lewa OS5.1 Ultimate (OTA)
LeWa OS Firmware - mirror
Firmware series "Victoria"
Jelly Bean 4.2.2

Instructions

Instructions for full formatting and firmware with the restoration of NVRAM
CWM Recovery Installation Instructions for Newbies
Patch to restore normal operation of all telephone equipment
Rooting and unlocking the MTS 975 phone for beginners (step by step guide)
How to remove a request for a lock code from non-SIM cards

Firmware via SP FlashTool

1) Connect the switched off body to the computer and in the task manager you catch the new equipment and slip the driver from the USB folder VCOM Driver and disconnect the phone.
2) Run sp flash tool and select the scart file from the firmware you will be sewing.
3) Remove the daws from the first two files and click the Download button.
4) Connect the disconnected body to the computer and wait for the completion of the firmware.
5) Disconnect the phone and hold the volume button + and the power button at the same time until the menu recovery loads, find the wipe factory reset with the volume rocker and select it with the power button and confirm.
6) Look for a reboot point in the recovery menu and confirm.
7) Wait until the body is loaded (the first download after the firmware takes a decent amount of time).

miscellanea

• Patch to reset the password without deleting data
  
• UnlockSim decouple from MTS
  
• Useful programs for working with firmware
  

Drivers, scatter, backup NVRAM

ROOT

Root method 1
Root method 2
Root method 3

K

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through the "Complaint" button under the messages to which you want to add links.

Post has been editedvaalf - 01.04.18, 21:58

Reason for editing: How to remove the request for a lock code of not simcards

[suharik85]

Using this instructionAlcatel One Touch 5035X X'POP Raven Black (discussion) (Post # 27040216)I made a rom-backup (FULL BACKUP).

Post has been editedsuharik85 - 21.12.13, 21:15

Reason for editing: Editing a link

[suharik85]

I spread my not sewnhttp://yadi.sk/d/3XTeo1_WFVP8ofor SP Flash Tool. Inside, an automatically created CWM and patched boot.

List of files inside the archive

Post has been editedSergey164 - 06.01.14, 00:40

[@ l e k s]

Firmware MTS 975 - Android 4.1.1
Clean firmware. Original topic of discussionhere
SwayHERE

Made TWRP Recovery for MTS 975 (Recover with touch control)
download | a source | TWRP FAQ
MTC975_TWRP.img(5.29 MB)


Post has been editedAleksNik2k - 05.01.14, 22:16

[@ l e k s]

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ, ADB, MTP пїЅ пїЅ.пїЅ. download

usb_driver.rar(691.74 KB)

SP_FlashTool for our phone
FlashToolMod.rar(7.2 MB)

MKToolDroidTools for removing backup, NVRAM, etc.
MtkDroidTools.rar(8.45 MB)

TWRP Recovery - recovery with user-friendly interface and touch controls.
Feature Description
MTC975_TWRP.img(5.29 MB)

CWM Recovery
MTS975_CWM.img(4.61 MB)

Full BackUp 1 by suharik85
download
Full BackUp 2 by drondronnord
download

In the course I will add ...

For developers

ImgExtractor for unpacking firmware files in EXT format (for example, system.img and custpack2.img)
ImgExtractor_1_3_1.rar(75.56 KB)

Post has been editedAleksNik2k - 07.01.14, 18:21

[igaryasha94]

Core "Speed^Mod Kernel "for MTS 975.

About the project :

Readme, by version

v1.2.1 :
Again, two versions, one with the usual level of multitasking, the other aimed at reducing such and acceleration due to this.
• In the version with an increased minfree, the adj level is now increased (if there is a shortage of memory, services and other impudent applications that interfere with playing will be more likely to be killed)
• Replaced the standard CPU Governor with Ondemand, now the battery saving is higher, the frequencies change, and not forever the maximum, as with the standard Hybrid.
• If anyone wanted to play around with the Root-Shell (adb shell, root option), then now this is easily possible (by default, only the shell without a root was available). I did everything necessary for this. Now we just enter on the computer in the consoleadb shelland access will open immediately from under the root (previously there was no such possibility).
v1.2 :
• Added the ability to increase minfree by adding the line 'sys.minfree.raise = 1' to the file /custpack/build.prop
• The accelerator program now does not start by default. To start it up, you need to add the string 'sys.entropy.enabled = 1' to the contents of build.prop.
v1.1 :
• The settings of the standard frequency controller of the CPU "hybrid" are changed in such a way as to better save the battery and make the device more stable. Performance is not affected at all.
• Two versions: normal and with increased minfree (less multitasking and much more pure speed).
пїЅ [the note] The kernel version and information about the inclusion of additional built-in functionality can be found by typing interminal emulatorfollowing:

cat /kernel.ver

The kernel version in the settings menu will not differ from the stock one (therefore, I created the method above).
What was originally and is the main advantage of the kernel :
• Absolutely correct change of the processor frequency depending on the load (usually about 80% will go to the maximum frequency, while charging, according to my observations, always at the maximum)
• Built-in rngd system accelerator (negates almost all Android brakes when running medium and heavy applications)
• Support init.d is present, but works only if Busybox is installed

Download
[Please do not perezalivat! ]
v1.0, v1.0 with minfree boost
v1.1v1.1 with minfree boostwill be a little laterwill not be.
v1.2 universal(how to start minfree boost mode we look at the version history).
v1.2.1:ordinary, with raised minfree. It is necessary after the kernel firmware (starting with version v1.2.1) to make Wipe Dalvik Cache because the kernel now has a newer launch mode enabled by default ("Dalvik JIT", or "Just In Time" compiler, which is both faster and more economical. If you have questions about it, then Google will help).

Install .zip through CWM or TWRP, or we get boot.img from it and flash through SP FlashTool by selecting this file in the BOOTIMG item.

Plans: not.

FAQ, or Frequently Asked Questions

Question: What have I done with minfree and what is minfree in general? <- Answer

Question: Is it possible to install an update (or the next version) of the kernel over the previous one?
Answer: Since the kernel is overwritten with the firmware, it can be flashed over any other. So the answer is yes, you can.

Question: What and how to do Wipe Dalvik Cache (wipe dalwick cache)?
Answer:
CWM: Advanced ->Wipe Dalvik
TWRP: Wipe ->Dalvik cache

Any questions - contact QMS, do not be shy ;-)

Post has been editedigaryasha94 - 03.10.14, 14:38

Reason for editing: Replaced broken links

[hanuma50]

Carliv Touch Recovery V2.2(Custpack back-up)
recovery_CTR_v2.2_MTC975.img(4.7 MB)

screen

Installation Recovery В® Mobileuncle MTK Tools

TEST

Request for all who try, please, write to QMS!

Post has been editedhanuma50 - 24.04.14, 22:09

[igaryasha94]

hanuma50laid outfully functional TWRP-recovery(in the previous, the function of connecting to the computer as a flash drive, as well as NVRAM, boot and uboot backup did not work).
Vyklydyvat stitched in recoveryinstaller.

Post has been editedigaryasha94 - 09.02.14, 14:48

[playful8181]

Rooting and unlocking the MTS 975 phone for beginners (step by step guide)

I did not succeed in either ruining or unlocking the phone by following the instructions in the header. Because I have WINDOWS 8 (8.1) x64 ..
The thing is that Windows 7/8 / 8.1 (x64) has a built-in digital signature verification for drivers, and if the driver does not have one, then Windows doesn’t see this driver. Therefore, the first step - rooting the phone through Kingo Android Root did not work for me ... The program honestly installed, downloaded some drivers, but could not detect the phone. In the device manager, MTS 975 "lit" with an exclamation mark (i.e., a device without drivers). So I had to do everything in this order:

Disable digital signature verification drivers in Windows 8

In order to disable digital signature verification, we need to go to the boot options menu. You can get into it as follows:

1. Press [Win] + [i], in the parameters menu, hold down the Shift button, select, Turn off ->Reboot:
2. Then, select the Diagnostics menu (Restore the computer, return the computer to its original state, or use additional tools):
3. Advanced options:
4. Boot Options (Configuring Windows Boot Options)
5. Further, you need to restart the computer:
6. After rebooting, the computer will enter into the boot type selection mode. Click F7 (Disable mandatory driver signature verification):
As a result, Windows 8 will boot in a mode in which you can install unsigned drivers. Now, you can install drivers.

Install ADB Drivers

1. Download universal ADB drivers
2. Connect the phone to the computer, select "USB debug mode" on the phone (Settings>About phone>Advanced settings>USB debugging)
3. Install AdbDriverInstaller.exe (which we downloaded in the first paragraph)
(when installing the Windows driver it will scold that the driver is unsigned, but we install it anyway :))
Everything. Universal ADB driver for the phone is installed.

We put on the phone ROOT access

1. Download the latest version of the program Kingo android root
2. Disconnect the phone from the computer
3. Install and run Kingo Android Root
4. Connect the phone to the computer
5. It is necessary to wait until the program starts to determine the phone (this may take some time), and if the phone has not been determined, disconnect the phone. from the computer and connect again ...
6. A green ROOT button will appear - click on it ...
7. The phone is rooted and rebooted ..
all ... the phone is rooted ...

Unlock (decoupling from the operator)

Due to lack of time I will write later ...

Post has been editedplayful8181 - 17.03.14, 11:55

[@ l e k s]

Good news
Our phone works with 2 SIM cards.

MIUI firmware - Test againHERE
I broke the plastic jumper and stuck the second SIM card.
Sims insert as they lie on the phone.
MTS in the lower connector - SIM 1
Beeline in the top connector - SIM 2
You can also swap places, but I wrote in order to know how to properly insert the SIMs themselves.
The first SIM is inserted with the contacts up into the bottom connector.
The second SIM is inserted with the contacts down into the upper connector.

Inserted SIM card number 1 - SIM 1

SIM card number 2 is inserted - SIM 2

Both SIM cards are inserted, photo from the side.

Picking up my MIUI firmware mod, I saw this.

How is the news?

Post has been editedFobos68 - 10.04.14, 10:57

Reason for editing: Added description ...

[playful8181]

[email protected], 10:30 pm

Who is the real way to ralochka from the operator?

There is such a story ... The real way is the way with the deletion of files ... this is true ... but it works only for those who have never tried to enter the unlock code ... if they have already tried - either the unlock code or the edit will help NVRAM ... The point is that the “system of blocking” stores data in the phone's NVRAM (a counter of attempts and another block of some information) ... this “some kind of information” changes with each unsuccessful unlock attempt ... Therefore in order for the file deletion method to work, you need to bring this very block of information to the initial one id Also, if an unlock counter is assigned a value greater than 10 or less than zero, the locking system silently stops its operation, and even the corresponding items in the menu disappear ... everything seems to be simple, but there are TWO non-obvious problems - firstly this very block of information for each phone is unique (apparently depends on IMEI) and if it is stupid to wipe it up or score with random values ​​- the phone does not turn on, and secondly - the addresses of the lock counter values ​​of each individual phone are also in different places of NVRAM - therefore some niversalnoy simple instructions on how to unlock all phones - and never will be ... Not a simple guide I write slowly ... by the way she seems absolutely suitable for all android devices, but to use it is necessary to possess at least a basic knowledge of programming ...

although...
there is another way (step by step)
1. Download the source code of the system from our devicehere
2. Find where the locking system is
3. "cut" the lock system
4. build the system from source and upload it to the device.


: lol:

[walkman-star]

playful8181 @ 03/07/2014, 11:49

there is another way (step by step)
1. Download the source code of the system from our device here
2. Find where the locking system is
3. "cut" the lock system
4. build the system from source and upload it to the device.

what nonsense?
1. not the source code, but the source code of the kernel (for simple kernel kernels)
2. This “locking system” is not in the kernel.
3. from these sources you can build only the kernel and not the system

Post has been editedwalkman-star - 07.03.14, 10:17

[playful8181]

Walkman-star @ 03/07/2014, 16:14

what nonsense?
1. not the source code, but the source code of the kernel (for simple kernel kernels)
2. This “locking system” is not in the kernel.
3. from these sources you can build only the kernel and not the system

1. The kernel is the operating system (for a simple OS) ... everything else - launchers / programs (for simple software) and additional modules (for simple drivers and so on (the kernel is not monolithic)) ...
2. The locking system works just at the kernel level. And in the case of pushers built in there.
3. See point 1.

p.s. 4. yes, a fully working firmware with the help of the kernel alone cannot be created, but it is quite possible to remove the blocking system and only insert the kernel into the device ... but it requires special knowledge and skills ... and it is incredibly long ... easier during this time with such knowledge) to develop your own kernel (based on AOSP), than to dig and understand the intricacies of someone else's ...

Post has been editedplayful8181 - 07.03.14, 10:43

[walkman-star]

playful8181I will not begin to argue in order not to litter the topic, do what you want

playful8181 @ 03/07/2014, 13:25

in the case of pushers built in there.

rummaged in his sortsa and no mention of the "lock system" is not there

Post has been editedwalkman-star - 07.03.14, 12:05

[walkman-star]

playful8181 @ 03/07/2014, 13:25

to remove the blocking system and fill only the core into the device - it is quite possible ... but it requires special knowledge and skills .. and it is incredibly long ...

Sorts from the drunk is not complete, you need to add the missing files from other sorts. If you are familiar with Linux, then a lot of knowledge will not be needed. It's not that long

[@ l e k s]

playful8181 @ 7.3.2014, 12:25

1. The kernel is the operating system (for a simple OS) ... everything else - launchers / programs (for simple software) and additional modules (for simple drivers and so on (the kernel is not monolithic)) ...
2. The locking system works just at the kernel level. And in the case of pushers built in there.
3. See point 1.

p.s. 4. yes, a fully working firmware with the help of the kernel alone cannot be created, but it is quite possible to remove the blocking system and only insert the kernel into the device ... but it requires special knowledge and skills ... and it is incredibly long ... easier during this time with such knowledge) to develop your own kernel (based on AOSP), than to dig and understand the intricacies of someone else's ...

Alcatel has a section likesecro, here it contains information about blocking. The mod of the same left does not use this information and therefore works calmly with any sim cards.
Hare about any kernels.
Take the secro section, remove everything from it. Then do a full reset of the phone and forget about the symlock.

Post has been editedAleksNik2k - 07.03.14, 17:44

[Funtyara2]

And how are things with miui.

[@ l e k s]

Funtyara2 @ 7.3.2014, 18:58

And how are things with miui.

Slow, while a break. Today I will pick.

[sertufikat]

AleksNik2kand what are your plans, where do you think to start picking?

[@ l e k s]

[email protected], 21:35

and what are your plans, where do you think to start picking?

Make MIUI, while I select the best donor for porting ...

[Funtyara2]

AleksNik2k @ 7.3.2014, 17:05

Slow, while a break. Today I will pick.

Will wait.