TP-Link WR1043nd - Discussion | [Wifirouter] Discussion of all versions (v1 - v3) router
EXWOUND @ 11.08.18, 09:00
We will have to order programmer
What does it mean to "order"? You need any adapter USB-TTL. There are not one dozen such a dozen in the nearby surroundings in 5 minutes. Introtka: Datababelle for old phones (Siemens etc.) - on any dumping a bunch of ..., Cables for the diagnosis of HBO, Arduin (anyone with USB port: UNO, Nano ...), USB-com adapters (were and such common 10 years Back) .... in general - look for any cable from which from one end - USB-A, and from another minimum three tails with the inscriptions RX, TX and GND.
PS But also order also does not hurt. My extreme USB-TTL adapter privatized maniacs HBO - he see him perfectly approached (for software it was critical there on which chip the adapter is assembled). In exchange, they left a couple that they did not work with them (for the router do not care on which chip is the main thing that the firewood is).
exwound Router cuts the speed of the waffle godlessly
itI tried? I will not say about everything, but the choice of the right channel helped me increase the speed. Put any other Wi-Fi Analyzer to find out what channels do neighbors enjoy
exwound For SSH, the config waffle needs to correct. So that he did not scan the environment. Edit in / etc / config / wireless to add to WiFi-Device: Option Noscan '1' section. And there will be happiness. I sit on Gargule.Good evening to everyone. There is a TP-LINK TL-WR1043ND V2 router I want to flash on DD-WRT R25697 for TP-Link TL-WR1043ND V2. Tell me please eat at all meaning or not? And where to find the instruction on the firmware. Thank you!
And a few questions on the firmware: whether there is a Russian language and where you can download the firmware without registration on the DD-WRT website.
It seems figured out.
1) you need to go to the sitehttps://dd-wrt.com.
2) Find the TP-LINK WR1043N (D) 2.x router
3) Download Factory-to-ddwrt.bin 2018-08-09 7.69 MB and flash through a web face.
Do I really understand everything?
Just in case, throw off somebody file to roll back to the stock firmware, in case the DD-WRT will not like it. THANK YOU!
Post has been editedlSumraKl - 13.08.18, 18:48
And a few questions on the firmware: whether there is a Russian language and where you can download the firmware without registration on the DD-WRT website.
It seems figured out.
1) you need to go to the sitehttps://dd-wrt.com.
2) Find the TP-LINK WR1043N (D) 2.x router
3) Download Factory-to-ddwrt.bin 2018-08-09 7.69 MB and flash through a web face.
Do I really understand everything?
Just in case, throw off somebody file to roll back to the stock firmware, in case the DD-WRT will not like it. THANK YOU!
Post has been editedlSumraKl - 13.08.18, 18:48
Lsumrakl @ 08/13/18, 17:02
And a few questions on the firmware: Is there a Russian language
Firmware can be freely downloaded with FTP DD-WRT
ftp://ftp.dd-wrt.com/and from herehttps://dd-wrt.com/support/router-database/
In general, if you are interested in gigabitgi speeds, I think already better openwrt with a softener of Hardware Nat. That's here moreTP-LINK WR1043ND - Discussion (post v111v111 # 75515486)
Post has been editedv111v111 - 14.08.18, 08:11
Friends please tell me not found in the topic or britter. Router WR1043ND V2. Installed the latest DD-WRT version. Internet from Rostelecom TV Prefix is ​​connected in 4 port. How to combine the WAN and LAN4 port and configure the TV. Thank you!
If the cable is connected to the console, the console receives the internal IP address of the RT 10.x.x. Now the prefix is ​​enabled in the 4th port and receives the IP address from the router 192.168.1.Х.
I suffer 2 days I can not set up. (On the TV just a black screen) Help please !!!
If the cable is connected to the console, the console receives the internal IP address of the RT 10.x.x. Now the prefix is ​​enabled in the 4th port and receives the IP address from the router 192.168.1.Х.
I suffer 2 days I can not set up. (On the TV just a black screen) Help please !!!
Sereg_K, On the V1 DD-WRT is not put. Only if you find a very old archival version. Everything else briquettes router. But for the link - plus.
Posted on 14.08.2018, 08:19:
Fit56922 @ 08/13/2018, 16:54
And you can detail how to do it?
Lsumrakl @ 08/13/18, 17:02
Download File Factory-to-Ddwrt.bin 2018-08-09 7.69 MB and flash through a web face.
What is there v. 3 Do not be afraid, on V. 2 will go for the transition, from under it set the native ...
Post has been editedv111v111 - 14.08.18, 08:53
Lsumrakl @ 08/14/18, 07:03
How to combine the WAN and LAN4 port and configure the TV
google.com/search?q=DD-WRT+StB+Port.
This should be like this (third LAN port):
 |
Post has been editedLESHIY_ODESSA - 14.08.18, 10:45
Leshiy_odessa @ 08/14/18, 10:39
google.com/search?q=DD-WRT+StB+Port.
For two days I have already reread everything you can. But so nothing comes: (
If you know how to give normal instructions. Thank you!
Lsumrakl @ 14.08.18, 09:40
If you know how to give normal instructions. Thank you!
Above, I posted a picture. But I am afraid that if Google did not help you, it will not help anything. Contact your specialist for help (not for me).
Post has been editedLESHIY_ODESSA - 14.08.18, 10:46
Leshiy_odessa @ 08/14/18, 10:44
Above, I posted a picture. But I am afraid that if Google did not help you, it will not help anything. Contact your specialist for help (not for me).
Now there is no VLANS partition in the web. He is hidden from security considerations! From here and it turns out that you can only configure through Telnet.
DD-WRT - Alternative firmware (post _Danil_ # 48239390)
Post has been editedlSumraKl - 14.08.18, 10:48
In the topic DD-WRT Firmware. The same silence. Does there really be normal instructions for DD-WRT + STB?
Dimon2NT @ 14.08.18, 12:11
People tell me if it is possible to reset the root password without losing the settings?
Most likely no.
Dimon2NT @ 08/14/18, 14:11
People tell me if it is possible to reset the root password without losing the settings?
vovan26_ , how? If in any other Unix you can via Passwd, and then how? There is also an idea, but the password is unknown ((Dimon2NT @ 14.08.18, 11:38
how?
RESETTING THE ROOT PASSWORD пїЅ From There, You Don't Have To Ret The Whole Configuration. Note That Fail Safe Mode Does Not Require A Password for Authentication of Root (!) .
FAILSAFE MODE, FACTORY RESET, AND RECOVERY MODE.
Password reset on OpenWRT.
OpenWrt Failsafe Mode.
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement