Assistant
REPLY |
TP-Link WR1043nd - Discussion | [wifirouter] Discussion of all versions (v1 - v3) of the router |
Message#1 16.10.14, 14:05 | |
Guru [offline] Group: Moderators Messages 14707 Check in: 04.05.09 Apple iPhone 7 Reputation: 1715 | TL-WR1043ND - Discussion A photo v1 v2 Description v1
v2
Specifications TP-link_TL-WR1043ND_v1.x TP-link_TL-WR1043ND_v2.x TP-link_TL-WR1043ND_v3.x v1 Hardware Interface
Standards of wireless data transmission IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 3 dBi antenna * 3 removable omnidirectional antennas (RP-SMA connector) Dimensions (WxLxH) 200 x 28 x 140 mm Parameters of the wireless module The frequency range of 2.4-2.4835 GHz Signal transmission speed
Sensitivity (reception)
Wireless Security 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK Wireless network 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK Software features WAN connection type Dynamic IP address / Static IP address / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond DHCP Server, Client, DHCP Client List, Address Reservation QoS (traffic prioritization) WMM, Bandwidth Control Port Forwarding Virtual Server, Port Launch, UPnP, DMZ Dynamic DNS DynDns, Comexe, NO-IP VPN PPTP, L2TP, IPSec (ESP Head) Access control Parental control, local control control, list of nodes, scheduled access, rule management Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, IP binding and MAC address Control
CE, FCC, RoHS certification Contents of delivery
Environmental parameters
v2 Hardware Interface
Standards of wireless data transmission IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 5 dBi antenna * 3 removable omnidirectional antennas (RP-SMA connector) Dimensions (WxLxH) 225 x 141 x 30 mm Parameters of the wireless module The frequency range of 2.4-2.4835 GHz Signal transmission speed
Sensitivity (reception)
Wireless Security 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK Software features WAN Connection Type Dynamic IP Address / Static IP Address / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond DHCP Server, Client, DHCP Client List, Address Reservation QoS (traffic prioritization) WMM, Bandwidth Control Port Forwarding Virtual Server, Port Launch, UPnP, DMZ Dynamic DNS DynDns, Comexe, NO-IP VPN traffic pass PPTP, L2TP, IPSec (ESP Head) Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address Control
CE, FCC, RoHS certification Contents of delivery
Environmental parameters
useful links Catalog of official firmware TP-link TL-WR1043ND official with cut out boot for TP-Link TL-WR1043NDv3 DD-WRT r25697 for TP-Link TL-WR1043NDv1 (22.12.14) DD-WRT r25697 for TP-Link TL-WR1043NDv2 (22.12.14) OpenWRT - firmware and most detailed wiki (eng.) Firmware WR1043ND v1 OpenWrt Attitude Adjustment 12.09 r36088 (v5) from yohimba Gargoyle - firmware and wiki (eng.) | crutch for DNS on the gargoyle Gargoyle Firmware (Gargoyle) Gargoyle TP-Link WR1043nd v1 FAQ TP-Link WR1043nd v1 router review on 3DNews TP-Link router overview WR1043nd v1 on Overclockers.ru Reassigning WAN port to LAN Transition to official firmware for TP-LINK routers with DD-WRT Instructions for the restoration of TP-Link TL-WR1043ND v.1 Expansion of the system section OpenWrt Barrier 14.07 on the firmware from gwlim WR1043ND v1 OpenWrt Barrier Breaker 14.07 r45620 firmware from gwlim Setting up an OpenVPN server OpenWrt for sabzh v.3 How to return the official firmware on TL-WR1043ND_v1 with OpenWRT Method of getting Dual Access on gargoyle firmware Using the alternative Breed loader (v.833). Fast-Path-LEDE-OpenWRT for v.1 v.2 v.3 v.4 and ath79-builds for v.1 v.2 v.3 v.4 Password reset English version of the stock firmware BETA TL-WR1043ND_V3_160713 from 2016-08-09 RESTORATION TL-WR1043ND from brick state Post has been editedstp101 - 05.02.19, 20:26 Reason for editing: TL-WR1043ND RECOVERY from brick state |
Message#42 12.12.14, 21:49 | |
Cheshire ... Here is a dog! .. [offline] Group: Honorary Gameday Messages 4218 Check in: 11.05.09 Apple iPhone XR Reputation: 354 | 3PAC, Put in place of TCP ->ALL If it doesn't help, try alternative firmware. When downloading a device, how is it connected to the router? -------------------- iPhone XR + iWatch 3 + iPod Nano 2G + MacBook Pro 2012 => I ♥ Mac OS Forum Rules |
Message#43 12.12.14, 22:12 | |
a guest [offline] Group: Users Messages 4 Check in: 16.10.11 Reputation: 0 | Cord. Gigabit in the router, gigabit in the computer. Cord factory. Gigabit connection speed. ALL did not help. I turn to a familiar Linux guru for help in setting up DD-WRT. Thanks for the help. ZY I read that the first versions did not give out more than 120 Mbit. But there is a percentage EMNIP 400 MHz, and here 720 MHz. There was an obvious calculation on my part that he would be able to grind. |
Message#44 12.12.14, 22:23 | |
Cheshire ... Here is a dog! .. [offline] Group: Honorary Gameday Messages 4218 Check in: 11.05.09 Apple iPhone XR Reputation: 354 | 3PAC, Try to change the cord, you never know Dd-wrt is usually configured via the web interface, no special knowledge in Linux is required -------------------- iPhone XR + iWatch 3 + iPod Nano 2G + MacBook Pro 2012 => I ♥ Mac OS Forum Rules |
Message#45 13.12.14, 01:02 | |
a guest [offline] Group: Users Messages 4 Check in: 16.10.11 Reputation: 0 | I requested DD-WRT. The situation is more than strange for me. At first it was all about the "Maximum number of ports" in the "Administration". It was ~ 4000 value. Although it is written that the default is 32768. Okay. Delivered 32768. CPU usage has increased (~ 50%) as the number of ports (~ 10k). But the speed of the torrent has not increased. And I observe such a rather strange picture. WAN load is about 10 times more than LAN. I don’t understand how a WAN can go up to 220 Mbps, and up to 22 LANs? Post has been edited-SunLion- - 13.12.14, 15:51 Reason for editing: photo under spoiler |
Message#46 14.12.14, 22:43 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 110 Check in: 11.03.10 Samsung Galaxy Note 4 SM-N910C Reputation: 2 | Tell me please: I have firmware 3.15.31 Build 130925 Rel.32445n WR1043 v2 Three months everything was OK, but now the Internet is tupit. I want to flash on TL-WR1043ND_V2_140725_RU from the official site, but it says "NOTE Only for TL-WR1043ND (RU) v2", and I just have TL-WR1043ND without "(RU)". Has anyone been stitching on this firmware contrary to the warning in the note? |
Message#47 14.12.14, 22:52 | |
Cheshire ... Here is a dog! .. [offline] Group: Honorary Gameday Messages 4218 Check in: 11.05.09 Apple iPhone XR Reputation: 354 | oleg-smile, RU has nothing to do with, there are only two versions of 1043 - v1 and v2, which is described in detail in the topic header + photos. Post has been edited-SunLion- - 14.12.14, 22:54 -------------------- iPhone XR + iWatch 3 + iPod Nano 2G + MacBook Pro 2012 => I ♥ Mac OS Forum Rules |
Message#48 15.12.14, 01:26 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 110 Check in: 11.03.10 Samsung Galaxy Note 4 SM-N910C Reputation: 2 | [email protected], 23:52 RU has nothing to do with, there are only two versions of 1043 - v1 and v2, which is described in detail in the topic header + photos. And another firmware (just below), ostensibly for version 2 too, but without(Ru) So I think to flash or not. There will be a brick, then a warranty case will say, there it was written where they were looking. Post has been edited-SunLion- - 15.12.14, 08:10 Reason for editing: photo under spoiler |
Message#49 15.12.14, 07:35 | |
Cheshire ... Here is a dog! .. [offline] Group: Honorary Gameday Messages 4218 Check in: 11.05.09 Apple iPhone XR Reputation: 354 | oleg-smile, There is written Russian web interface. Otherwise, there is no difference, I seem to have answered in an accessible way - at the moment there are two versions of "by hardware" 1043, so between them you really should not confuse the firmware. If you have noticed doubts at all, post a photo of bar codes that are pasted on the bottom of the router. Turn the device, on the bottom / back of the device you will see a label with a row of symbols “Ver: X. Y â€(for example, Ver: 1.0) in the Serial Number field. The number X is the device version.If the inscription looks like this: “Ver: 1.1â€, it means that you have a device version 1 in your hands. Note: If you cannot find the device version at the end of the FCC - ID, then it usually means that you have a device version 1. Post has been edited-SunLion- - 15.12.14, 08:15 Reason for editing: photo -------------------- iPhone XR + iWatch 3 + iPod Nano 2G + MacBook Pro 2012 => I ♥ Mac OS Forum Rules |
Message#50 15.12.14, 18:15 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 110 Check in: 11.03.10 Samsung Galaxy Note 4 SM-N910C Reputation: 2 | Thank. I will be stitched. One more question. Three months ago, when the router was still working normally, I ran into a problem: Put in the country settings: Russia. The signal through the two walls to say the least lousy. I read the forums, put the United States. And about the miracle of happiness there is no limit. The signal rolls over. The router in the apartment on the third floor, and I already catch Wi Fi from mailboxes on the first. I don’t even speak about those two impenetrable walls in the apartment. Nooooooo !!! There was a problem. In the line of sight of the router is a motion sensor corridor lighting. And he then spontaneously turns on, then turns off, then stupidly burns for three hours. In short trouble. I twist the antenna, it does not help. I turn off the router, everything is fine, the motion sensor works like a clock. I turn on the problem again. Assumed that TOO strong Wi Fi signal. Put in the settings again Russia. Signal strength dropped. Catching barely barely, but the motion sensor works as it should. Tell me, please, what other countries have a signal power better than Russia, but worse than the United States. Or can change other parameters? I must say that the router can not be outweighed. |
Message#51 15.12.14, 18:36 | |
Cheshire ... Here is a dog! .. [offline] Group: Honorary Gameday Messages 4218 Check in: 11.05.09 Apple iPhone XR Reputation: 354 | oleg-smile, For example, in the dd-wrt firmware it is possible to change the transmitter power in a numerical value, which facilitates the selection of the required parameters. For example, I specifically reduced the power of the retransmitter so that my net would not be caught outside of my apartment. -------------------- iPhone XR + iWatch 3 + iPod Nano 2G + MacBook Pro 2012 => I ♥ Mac OS Forum Rules |
Message#52 10.01.15, 17:57 | |
Only better [offline] Group: Friendssavagemessiahzine.com Messages 1692 Check in: 02.08.13 Apple iPhone 6s Plus Reputation: 182 | Guys. DD-WRT flashed, in the Wireless settings only 2.4 GHz. 5Ghz nowhere. Tell me where and how to enable this feature? + I guarantee :) -------------------- Phone: iPhone 6s Plus, Clock: Apple Watch Sport, Tablets: M $ Surface Book (Core i7, 16 GB RAM, 512 GB SSD)|iPad Pro 9.7 LTE. |
Message#53 10.01.15, 18:07 | |
Old resident [offline] Group: Friendssavagemessiahzine.com Messages 1042 Check in: 27.11.11 Xiaomi Mi Note 3 6/128 Reputation: 25 | |
Message#54 10.01.15, 18:13 | |
YYYY .. Lol? [offline] Group: Friendssavagemessiahzine.com Messages 350 Check in: 12.09.12 Sony Xperia XA Reputation: 8 | |
Message#55 10.01.15, 21:01 | |
Cheshire ... Here is a dog! .. [offline] Group: Honorary Gameday Messages 4218 Check in: 11.05.09 Apple iPhone XR Reputation: 354 | Martin_Devil, I do not know what is written on the box. Read the official specification for the router -TP-Link 1043 v2 Span one - 2.4 GHz Post has been edited-SunLion- - 10.01.15, 21:03 Reason for editing: Link -------------------- iPhone XR + iWatch 3 + iPod Nano 2G + MacBook Pro 2012 => I ♥ Mac OS Forum Rules |
Message#56 13.01.15, 00:59 | |
Only better [offline] Group: Friendssavagemessiahzine.com Messages 1692 Check in: 02.08.13 Apple iPhone 6s Plus Reputation: 182 | Guys. On DD-WRT, it is rather weak to distribute a waffle. Power 30 dB, gain 0. That's the way in the settings. Can it be strengthened without damaging the device? And I read in the subject that, depending on the region, a different signal power. It is necessary to cover the building as much as possible, what do you advise? -------------------- Phone: iPhone 6s Plus, Clock: Apple Watch Sport, Tablets: M $ Surface Book (Core i7, 16 GB RAM, 512 GB SSD)|iPad Pro 9.7 LTE. |
Message#57 13.01.15, 06:26 | |
Cheshire ... Here is a dog! .. [offline] Group: Honorary Gameday Messages 4218 Check in: 11.05.09 Apple iPhone XR Reputation: 354 | Martin_Devil, Weak is it like? With the parameter "TX Power" = 10 dBm, enough for a good coverage of an apartment of 40 m2 in an apartment building, the router is located in the corridor. -------------------- iPhone XR + iWatch 3 + iPod Nano 2G + MacBook Pro 2012 => I ♥ Mac OS Forum Rules |
Message#58 13.01.15, 10:02 | |
Only better [offline] Group: Friendssavagemessiahzine.com Messages 1692 Check in: 02.08.13 Apple iPhone 6s Plus Reputation: 182 | |
Message#59 13.01.15, 10:42 | |
Cheshire ... Here is a dog! .. [offline] Group: Honorary Gameday Messages 4218 Check in: 11.05.09 Apple iPhone XR Reputation: 354 | -------------------- iPhone XR + iWatch 3 + iPod Nano 2G + MacBook Pro 2012 => I ♥ Mac OS Forum Rules |
Message#60 13.01.15, 11:48 | |
Only better [offline] Group: Friendssavagemessiahzine.com Messages 1692 Check in: 02.08.13 Apple iPhone 6s Plus Reputation: 182 | |
Message#61 04.02.15, 09:48 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 358 Check in: 06.12.06 Meizu MX3 Reputation: 8 | It is worth asking dvdrt, build April 2013, is it worth updating to the December build 2014 (last), it works fine, but at the rate it does not reach megabits, plus sometimes wy-fay falls off (rarely, I reboot once a month) |
mobile version | Now: 04/18/19, 15:36 |