TP-Link WR1043nd - Discussion | [Wifirouter] Discussion of all versions (v1 - v3) router
I arrived, for some reason I can not flash with the factory on DDR WRT, I do everything as in the instructions of the seen on the Factory to DDR WRT, and I had 2 times the brick, and for the third time I put the last Russian firmware, then I rolled not the latest DDR WRT.
I could not go to the router, rebooted and again brick and eternal reset, and now it is not possible to restore what kind of fuck, before everything was normal and the officer on the caste and back.
I could not go to the router, rebooted and again brick and eternal reset, and now it is not possible to restore what kind of fuck, before everything was normal and the officer on the caste and back.
Hey. How is this router? I think about the package. Need for 1000Mbit LAN network. Can you take or look for something else? How with racility?
Spakainz It pulls 700 out of 1000 on the wire, if you have a GPON, perhaps (on my provider so) the router freezes once every 2-3 days, you need to rebute every day or once in 2. When there was a L2TP Beeline, there was no freezing.
Now there is a Giga 1010, it does not hang, but after 15 days a little worse works Wi Fi, I reboot)), by the way, TP Link 1043 ND gives a 69 megabit (L2TP) -78 ogbit (GPON), GPONE 1010 . In general, TP Link is a good router of its time, the signal power is enough for 3 bedroom apartment
Spakainz For 1000Mbit Lan Network You can buy Ketai 5..8port Gigabit Svish, for ~ $ 5 +
In 2019 there is a lot more
Viktorpalach22 @ 11.04.2019, 22:34
About hanging. Can OpenWRT firmware cuts out? What firmware advise? I have a V3 version.
Post has been editedSpakainz - 12.04.19, 09:10
What is the best OpenWRT so that without bugs and worked stably? Now it is worth it, WiFi does not interest it at all, I turn it off, the WiFi distribution performs another router.
Post has been editedOneShot12 - 12.04.19, 09:04
 |
Post has been editedOneShot12 - 12.04.19, 09:04
Spakainz , I did not try, I have long put DDR WRT and did the auto operation at 6 am, and now I put DDR WRT and turned into a brick ...
I have a version of V1 and the first revision
Post has been editedVictorpalych22 - 12.04.19, 17:13
Spakainz , No, with official on DDR WRT, everything was done on the game.
And posts above are, too many people broke the router
Viktorpalach22 @ 04/13/2019, 01:50
So how to flash? Maybe with the OpenWart there will be no problem ..
Spakainz , there will be problems, but it may be eating an author of a schedule, but how to flash Ask recently that successfully fulfilling
I put OpenWRT. But the download speed fell. The heat and the Max 30MB / s ... From the stock of the firmware I saw 70 MB / s. Return to the stock What? And how to do sabzh 3
Post has been editedSpakainz - 14.04.19, 15:28
Post has been editedSpakainz - 14.04.19, 15:28
Maybe someone will be needed ... Russian and English official firmware without boot for V2. Both are checked when moving from different firmware, recovery through the series.
WR1043V2.RAR.(10.06 MB)
WR1043V2.RAR.(10.06 MB)Hello ! Connected 3 smart telly to Wi Fi router TP-LINK TL-WR1043ND installed Out of player and the fork player everything works, but if you turn on the TVs simultaneously on TVs that you require the Internet, it falls off from one of them. ? Thank you in advance !
Zdarova Pasana, I have such a Model No. TL-WR1043ND such firmware 3.19.32 Build 150910 Rel.44072n, fucking is that it is in English, is there any possibility to russ it;)
Metic , Metic , on the site you look at the site, what is your revision and then you see the silt there is a firmware in RussianSurvover @ 04/22/19, 2:43 PM
Metic, Metic, on the site of the site you see what revision you have and then you see the firmware in Russian
Which is the last no, before that there was another version there was
Someone who tells you why he doesn’t restore via TFTPD to 1043 nd v1 now, does not react and does not write anything
I was stitched on DD WRT Build 36247 with the latest official Russian TL-WR1043ND_V1_121129_EN, and went into the eternal reboot, or the bootlup is called. It was already when I sewed on the DD WRT Build 37305 with an English official, but then I scattered through TFTPD normally. Now zero reaction when the adapter is crucified and inserted into the adapter outlet, the LAN port lights up for a second, in which the wire does not pick up the firmware. In the logs are empty (it used to wrote that the file was not found for example, I renamed and everything was OK)
Post has been editedVictorpalych22 - 23.04.19, 13:49
I was stitched on DD WRT Build 36247 with the latest official Russian TL-WR1043ND_V1_121129_EN, and went into the eternal reboot, or the bootlup is called. It was already when I sewed on the DD WRT Build 37305 with an English official, but then I scattered through TFTPD normally. Now zero reaction when the adapter is crucified and inserted into the adapter outlet, the LAN port lights up for a second, in which the wire does not pick up the firmware. In the logs are empty (it used to wrote that the file was not found for example, I renamed and everything was OK)
Post has been editedVictorpalych22 - 23.04.19, 13:49
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement