We enter the vebinterfeys, etc.
point control bandwidth.
p.s. But I have to, specify the binding points have been set menu ch.z binding ip- and mac-address, and then create a rule from the menu
control of bandwidth for each computer.

Post has been editedmau69 - 02.11.14, 10:25

Router : TP-Link TL-WR1043ND (v.1)
Firmware : DD-WRT
Firmware version : V24SP2- (03/25/13) std - build 21061v24SP2- (03/25/13) std

He switched to an alternative firmware for one reason only - to the official. it was not possible to raise the Samba server. I have a router via USB, connected - Seagate hard to 2Tb, wanted to make his network. This firmware has allowed me to do it. And all would be fine. But. connection speed, according to my plate, dropped from stable 65Mbps - up varied from 13 to 39 and just standing back to back in the router - the same 65. But it is in the corridor, so it's not an option. And when it comes to streaming video from Hardy, this speed, apparently - not enough. I tried various video players. Connected via the built-in Samba-client Root Explorer, ES Explorer, opening the video through the MX-Player, received lengthy interruptions or jerks. Same thing directly through the Dice Player. And I'm talking about the simplest ripah.

And here at all, no chance:

By the way, who podlagivaet even though the streaming on pisyuk (connected via UTP cable to the router), via VLC, Splash PRO EX or Media Player Classic.

actually the question . Who has the same router, and even better - the same firmware, it has Wireless / Advanced settings, the default setting as follows:
Channel width: Dynamic (20/40 Mhz) | Turbo (40 Mhz) and Full (20 Mhz) [Default]
Wireless Channel: Auto [Default]
Managing domain: United States [Default] - Without the ability to change
Everything else can be seen in the screenshot.

What are the values ​​and parameters should be changed to improve the quality of signal reception? Or I should not here to shake the air?

See your ddvrt green bodies. If they are as old as the mammoth, the higher you climb, and not

mr-kav
Try to include a short preamble and a 40MHz channel signal to lower the threshold from 2000 to 400 or even 300.
Automatic channel change to something at its discretion *

* Discretion is better to check the program or inssiderby this

Post has been editedtempico - 11.11.14, 01:05

Rurouny
I think on this router it will be impossible to implement
two login and password, automatically switching<- under what conditions o.O
as an option I can recommend:

• make a backup of the settings of the router for each tariff,
  
• called backups that could be seen where a tariff,
  
• as necessary to restore the settings that are needed.

tempico,
I would leave the Full (20 Mhz)
I put the wireless mode "only N" (if not older devices)
and the country has exposed Russia: dirol:
channel would leave the "Auto" (given the number of networks and noisy ether)

mr-kav something very old firmware, given that already there was a second version of the TL-WR1043ND
r25309 (11/11/14) for TL-WR1043ND v1 Himself sitting on r25279 (did not know that the update came out)
You can also conduct experiments with the transmitter power in the smaller side
I would still recommend to buy a NAS -WD My Live \ Book \ Cloud \ Cloud Mirror or something similar, namngo better suited for such purposes.
network speed is unlikely to rise strongly with the active use of the connected HDD, as part of the resources spent on maintenance and such a good part of (USB + Samba), so do not forget about the food (at an additional screw it?). I myself experimented when he wanted to stir up a network drive for TimeMachine improvised, the rate was as neahti, regardless of proximity to the router, and on more recent builds. This scenario is a maximum for the network backup documents are not more or raise print server. You need to really look at things;)

Post has been editedvadim_1984 - 13.11.14, 21:30

Guys tell who happened to run Huawei E3276 from MTS on multiweb iota from last ofmodemsandmen? that set up and where? and what firmware from 3276? Thanks in advance

Help plz. Set to ask tp1043v2 dd-wrt build 25408. Did partition on the hard ext2. I copied the folder, and then assembled, all in inustruktsii. Then he ordered repository for ipkg.
Dial ipkg update and it just goes to the next line, markups can not understand what is wrong, all the instructions written, is the same, but it does not work. Can have an idea?

crusaders,
refer to the instructions?
I once did this on - everything is fine to take off.
need access router to the Internet, transfer files to a disc, montiruesh system folders from the disk, install the latest ipkg. To mount all partitions after a restart to verify the authenticity of the hard disk system partition - creating a file in the root / opt (Faid will usb.hdd) in the presence of which will be mounted all other sections and folders.
command in telnet:

Here is the instruction tyts 1043
then configure ipkg
Only I drive in the correct repository team

further on instructions
then as asking

If you can help, I am ready to pay and skype contact, and teamviewer / ammyy admin if you want to be
I just have N66U bent bought this router, to drain all buggy dlna and file the world. On dd-wrt file globe works fine, but I have to make a package to install the server-dlna some on n66u I put optware without problems.

Post has been edited-SunLion- - 02.12.14, 13:20

crusaders,
Internet access is at the router?

Yes of course there is, I'm with him now on the site and sit, and the team Ping works. wget also works package download some can only sense 0

Post has been editedcrusaders - 02.12.14, 12:31

Hello.

Who will help. Earlier in the air everything it was fine 90/90 at the entrance to 100Mbps. And now everything is bad downlink fell to 0.03 Mbit / s uplink 42 Mbit. Pereproshivat NP official of Russian and angiyskuyu official of. I managed to squeeze 9/9 in both directions. Is already close to that by giving it back and pick up the money. Firmware 3.15.31 Build 130925 Rel.32445n

thanks for the answer

odich777,
Are you sure you Mbit / s and Mb / s is not to be confused?

no I'm not mistaken. Mbps. I fell descending channel, and that's it. I will refer to the Saporta.

odich777,
miracles do not happen, then dropped?
Try to flash third-party firmware - dd-wrt

Post has been edited-SunLion- - 05.12.14, 09:21

Guys please tell me. There sabzhevoy router V1, with the latest official firmware of English. By lan speed almost corresponding to the rate of 50 megabits. According to the wafer on a laptop torrents also swing at a speed of almost 5 megabytes \ s. But android smortfon on wafer speedtest`om shows only 4 megabit (500kbayt \ s) speed, and it falls during the races. Where to dig?

Ortisiz
the problem with all devices with android or specific?

Tp-link WR1043nd Ver2 encountered a problem. It should be the last factory firmware. Connected to gigabit through van ip on speaker. Spidtest normally work out and showing 500-800 Mb. When you attempt to download the torrent goes problema rate reaches 144 Mbps peak and then drop to zero, and again set a slow speed. After that, several smaller bursts speeds. And such bursts and shake. Direct computer fulfills torrent speed to 360 Mbps. Is DD-WRT can help? Sew right away I do not want to because of the guarantee. Judging by the symptoms it can be assumed that the router percent clogged number of CMV compounds and then comes reset connections. I took a router exclusively for marketing labels on the box "Achieves blazing WAN to LAN throughput of over 800Mbps with hardware NAT" .First such purchase made without a long smoking google under VAUeffektom. Maybe some settings you can make a weak * hopefully *?

3PAC,
Try port forwarding for the program swings torrent

So? Probyval put ANY same result 8 (

Post has been edited-SunLion- - 13.12.14, 15:50