156 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> TP-Link WR1043nd - Discussion | [wifirouter] Discussion of all versions (v1 - v3) of the router
ctich
Message#1
16.10.14, 14:05
Guru
*********
[offline]

Group: Moderators
Messages 14704
Check in: 04.05.09
Apple iPhone 7

Reputation:-  1715  +

TL-WR1043ND - Discussion


A photo
v1
Attached ImageAttached Image
Attached ImageAttached Image
v2
Attached ImageAttached Image
Attached ImageAttached Image
Description
v1
  • Up to 300 Mbps N wireless speed is ideal for applications that require a reliable connection, such as online HD video viewing, online games and IP telephony
  • All gigabit ports provide maximum data transfer speed
  • Multifunctional USB 2.0 port — share printers, files or media for your family and friends on a local network or via the Internet.
  • The ability to centrally store and share information due to the possibility of connecting USB storage devices
  • IGMP Proxy / Snooping Support and Bridge Mode for IPTV Multicast
  • WDS Wireless Bridge Support for reliable expansion of your network
  • Quickly establish a secure connection (WPA encryption) by pressing the QSS button
  • Quick Setup Wizard provides a quick and easy device setup.
  • The function of data prioritization (QoS) ensures the quality of IP-telephony and multimedia broadcasting
  • Backward compatibility with devices that support the standards 802.11b / g
  • External removable antennas with the ability to adjust and replace with more powerful ones
v2
  • Up to 300 Mbps N wireless speed is ideal for applications that require a reliable connection, such as online HD video viewing, online games and IP telephony
  • All gigabit ports provide maximum data transfer speed
  • Speed ​​mode allows you to increase the speed of the wireless connection up to 450 Mbps
  • Multifunctional USB 2.0 port — share printers, files or media for your family and friends on a local network or via the Internet.
  • The ability to centrally store and share information due to the possibility of connecting USB storage devices
  • IGMP Proxy / Snooping support, Bridge mode and 802.1qVLAN tag-based mode for IPTV service without delays or gaps
  • WDS Wireless Bridge Support for reliable expansion of your network
  • Quickly establish a secure connection (WPA encryption) by pressing the WPS button
  • Quick Setup Wizard provides a quick and easy device setup.
  • The function of data prioritization (QoS) ensures the quality of IP-telephony and multimedia broadcasting
  • Backward compatibility with devices that support the standards 802.11b / g
  • External removable antennas with the ability to adjust and replace with more powerful ones
Specifications
TP-link_TL-WR1043ND_v1.x
TP-link_TL-WR1043ND_v2.x
TP-link_TL-WR1043ND_v3.x
v1
Hardware
Interface
  • 4 10/100/1000 Mbps LAN ports
  • 1 10/100/1000 Mbps WAN port
  • 1 USB 2.0 port
Buttons
  • QSS button (WPS)
  • Power button
  • Wi-Fi button
External power supply 12 V DC. current / 1.5 A
Standards of wireless data transmission IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
3 dBi antenna * 3 removable omnidirectional antennas (RP-SMA connector)
Dimensions (WxLxH) 200 x 28 x 140 mm
Parameters of the wireless module
The frequency range of 2.4-2.4835 GHz
Signal transmission speed
  • 11n: up to 300 Mbps (dynamic)
  • 11g: up to 54 Mbps (dynamic)
  • 11b: up to 11 Mbps (dynamic)
EIRP (Wireless Power)<20 dBm (EIRP)
Sensitivity (reception)
  • 270m: -68 dBm at 10% coefficients. batch errors
  • 130m: -68 dBm at 10% coeff. batch errors
  • 108m: -68 dBm at 10% coefficients. batch errors
  • 54m: -68 dBm at 10% coefficients. batch errors
  • 11m: -85 dBm at 8% coefficients. batch errors
  • 6m: -88 dBm at 10% coefficients. batch errors
  • 1m: -90 dBm at 8% coefficients. batch errors
Operation Modes Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Network Statistics
Wireless Security 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Wireless network 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Software features
WAN connection type Dynamic IP address / Static IP address / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond
DHCP Server, Client, DHCP Client List, Address Reservation
QoS (traffic prioritization) WMM, Bandwidth Control
Port Forwarding Virtual Server, Port Launch, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN PPTP, L2TP, IPSec (ESP Head)
Access control Parental control, local control control, list of nodes,
scheduled access, rule management
Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address /
MAC address, domain name, IP binding and MAC address
Control
  • Access control
  • Local management
  • Remote control
Other
CE, FCC, RoHS certification
Contents of delivery
  • TL-WR1043ND
  • 3 removable omnidirectional antennas
  • Power adapter
  • CD with materials
  • Quick Setup Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў or Windows 7, MACВ® OS, NetWareВ®, UNIXВ® or Linux
Environmental parameters
  • Operating temperature: 0 в„ѓ - 40 в„ѓ
  • Storage temperature: -40 в„ѓ - 70 в„ѓ
  • Relative air humidity during operation: 10% - 90%, without condensation
  • Relative humidity during storage: 5% - 90%, without condensation
v2
Hardware
Interface
  • 4 10/100/1000 Mbps LAN ports
  • 1 10/100/1000 Mbps WAN port
  • 1 USB 2.0 port
Buttons
  • WPS / Reset button
  • Power button
  • Wi-Fi button
External power supply 12 V DC. current / 1.5 A
Standards of wireless data transmission IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
5 dBi antenna * 3 removable omnidirectional antennas (RP-SMA connector)
Dimensions (WxLxH) 225 x 141 x 30 mm
Parameters of the wireless module
The frequency range of 2.4-2.4835 GHz
Signal transmission speed
  • 11n: up to 300 Mbps (dynamic)
  • 11g: up to 54 Mbps (dynamic)
  • 11b: up to 11 Mbps (dynamic)
EIRP (Wireless Power)<20 dBm (EIRP)
Sensitivity (reception)
  • 270m: -68 dBm at 10% coefficients. batch errors
  • 130m: -68 dBm at 10% coeff. batch errors
  • 108m: -68 dBm at 10% coefficients. batch errors
  • 54m: -68 dBm at 10% coefficients. batch errors
  • 11m: -85 dBm at 8% coefficients. batch errors
  • 6m: -88 dBm at 10% coefficients. batch errors
  • 1m: -90 dBm at 8% coefficients. batch errors
Wireless Features Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Statistics
Wireless Security 64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Software features
WAN Connection Type Dynamic IP Address / Static IP Address / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond
DHCP Server, Client, DHCP Client List, Address Reservation
QoS (traffic prioritization) WMM, Bandwidth Control
Port Forwarding Virtual Server, Port Launch, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec (ESP Head)
Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address
Control
  • Access control
  • Local management
  • Remote control
Other
CE, FCC, RoHS certification
Contents of delivery
  • TL-WR1043ND
  • 3 removable omnidirectional antennas
  • Power adapter
  • CD with materials
  • Quick Setup Guide
System Requirements MicrosoftВ® WindowsВ® 98SE, NT, 2000, XP, Vista в„ў or Windows 7, MACВ® OS, NetWareВ®, UNIXВ® or Linux
Environmental parameters
  • Operating temperature: 0 в„ѓ - 40 в„ѓ
  • Storage temperature: -40 в„ѓ - 70 в„ѓ
  • Relative air humidity during operation: 10% - 90%, without condensation
  • Relative humidity during storage: 5% - 90%, without condensation
useful links


Post has been editedstp101 - 05.02.19, 20:26
Reason for editing: TL-WR1043ND RECOVERY from brick state
KVN777
Message#2
26.03.14, 01:26
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 21.01.10
Samsung Galaxy Spica GT-I5700

Reputation:-  1  +

I installed the optive version of the router v.2 OpenWrt firmware on TP-Link 1043ND and everything seemed to be set up fine, but after rebooting the web interface stopped working!
I installed the firmware from this site:http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd

192.168.1.1 pings and can be accessed via Telnet!
But what commands do I need to enter to set up the Internet or enable the web interface, I don’t understand ?!

I also found an article on how to roll back to the factory firmware, but the problem is that you need to have a configured Internet on the router!
http: //www.starblazer...AME=...692#message6692
and the samehttp://forum.ixbt.com/..?idid1441517:2131#2131

Maybe you can specify a folder on your computer where the factory firmware is and download from it?

Post has been editedKVN777 - 26.03.14, 01:28
sneres
Message#3
26.03.14, 18:15
Cnccoder
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 817
Check in: 09.01.11
Vertu Ascent Ti Damascus Steel

Reputation:-  104  +

KVN777,
if there is a firmware from a trunk, then there may not be a web interface (luci), you can put it offline
http: //wiki.openwrt.or...owto/luci.essentials? s
or configure network settings via winscp console, putty to help


there where the firmware was taken below is the manual for rolling back to the original firmware, just read carefully otherwise zakirpichite


--------------------
full support for
citizens Donetsk & Lugansk also republic
ClubLinuxsoids!

KVN777
Message#4
26.03.14, 23:50
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 21.01.10
Samsung Galaxy Spica GT-I5700

Reputation:-  1    +

thank you for not ignoring ....
tried to flash through ftp, got a reboot. Tomorrow we will try to reflash through sirial port, I will write off what happens ....)
KVN777
Message#5
28.03.14, 11:06
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 21.01.10
Samsung Galaxy Spica GT-I5700

Reputation:-  1  +

Hi, the router was stitched only with OpenWRT firmware from the developer's site. again came across a problem, after the first login you need to put a password. I enter "passwd" writes enter the new password, but the characters in the line are not typed what to do ...?
can anyone help
sneres
Message#6
28.03.14, 11:10
Cnccoder
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 817
Check in: 09.01.11
Vertu Ascent Ti Damascus Steel

Reputation:-  104  +

Characters are not displayed, so it should be


--------------------
full support for
citizens Donetsk & Lugansk also republic
ClubLinuxsoids!

KVN777
Message#7
28.03.14, 14:27
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 21.01.10
Samsung Galaxy Spica GT-I5700

Reputation:-  1    +

In SSH, the web interface is not installed, I do not understand how to install offline.
sneres
Message#8
28.03.14, 15:57
Cnccoder
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 817
Check in: 09.01.11
Vertu Ascent Ti Damascus Steel

Reputation:-  104  +

KVN777,
study what packages are needed herehttp: //wiki.openwrt.or...owto/luci.essentials? sMinimalistic offline installation
swing them from herehttp: //downloads.openw...trunk/ar71xx/packages/on a computer, using winscp, transfer them to a router, for example in / tmp / luci
go through putty to the router and install them, so opkg install /tmp/luci/liblua_5.1.5-1_ar71xx.ipk


liblua_5.1.5-1_ar71xx.ipk is for example, and so everyone is possible and all together through &
p.s.this is a branch for developers, packages have been updated today, there may be incompatibilities

Post has been editedsneres - 28.03.14, 20:34


--------------------
full support for
citizens Donetsk & Lugansk also republic
ClubLinuxsoids!

KVN777
Message#9
28.03.14, 20:35
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 21.01.10
Samsung Galaxy Spica GT-I5700

Reputation:-  1    +

How to find the package you need to download for this version of the firmware.
there are too many of them ... (
KVN777
Message#10
09.04.14, 18:06
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 21.01.10
Samsung Galaxy Spica GT-I5700

Reputation:-  1  +

problem solved, special thanks to "sneres". I think the topic is closed.
iDjant
Message#11
27.04.14, 23:46
Visitor
**
[offline]

Group: Active users
Messages 27
Check in: 06.04.11
LG Optimus 4X HD

Reputation:-  0  +

Good day! The same situation as with KVN777 has happened! After the firmware of the router, OpenWRT does not enter the web interface, although telnet and ping pass! Please tell me how was the problem solved!
KVN777
Message#12
27.04.14, 23:49
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 21.01.10
Samsung Galaxy Spica GT-I5700

Reputation:-  1  +

Hi, The interface components were manually downloaded and installed.
iDjant
Message#13
27.04.14, 23:51
Visitor
**
[offline]

Group: Active users
Messages 27
Check in: 06.04.11
LG Optimus 4X HD

Reputation:-  0  +

And there is no list of these components! and then rummaged through a bunch of things and so did not understand which of these things to choose?
KVN777
Message#14
27.04.14, 23:57
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 21.01.10
Samsung Galaxy Spica GT-I5700

Reputation:-  1  +

that's what I was advised:
sneres
need original firmware without boot
rename it for example intplink.bin,
you throw it in a folder/ tmp
and write in putty
mtd -r write /tmp/tplink.bin firmware

hereexileOn this piece of iron they are discussing there and there is a firmware without boot

here is the minimum that you need to install
liblua
lua
libuci-lua
libubus-lua
uhttpd
luci-lib-ipkg
luci-i18n-english
luci-sgi-cgi
luci-lib-core
luci-lib-nixio
luci-lib-sys
luci-lib-web
luci-proto-core
luci-theme-base
luci-theme-openwrt
luci-mod-admin-core
luci-mod-admin-full


Post has been editedvadim_1984 - 14.11.14, 09:58
Reason for editing: beauty brought
Rurouny
Message#15
16.10.14, 12:57
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 62
Check in: 24.01.13
Google galaxy nexus

Reputation:-  1  +

TL-WR1043ND how to set up so that it automatically changes, one connection to another, (that is, there is a tariff access and not a tariff. But the speed limit is 2, the first after an hour of the night is anlim at speed standards) how to make it so he automatically switched to another connection.
ctich
Message#16
16.10.14, 15:22
Guru
*********
[offline]

Group: Moderators
Messages 14704
Check in: 04.05.09
Apple iPhone 7

Reputation:-  1715  +

Rurouny @ 10/16/2014, 12:57*
how to set up so that it automatically changes, one connection to another

Do you have two different "Internet" in the apartment comes 2 lace?
The modem has only one wan port, I don’t think that it can be configured this way: scratch_one-s_head:


--------------------
mafia9111
Message#17
16.10.14, 15:32
a guest
*
[offline]

Group: Users
Messages 2
Check in: 16.10.13
LG G2

Reputation:-  0  +

people! Is this unit suitable for a 3-room apartment?

Post has been editedmafia9111 - 16.10.14, 15:34
ctich
Message#18
16.10.14, 15:39
Guru
*********
[offline]

Group: Moderators
Messages 14704
Check in: 04.05.09
Apple iPhone 7

Reputation:-  1715  +

* mafia9111,
You can take it, the price-quality is optimal.


--------------------
Rurouny
Message#19
16.10.14, 19:33
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 62
Check in: 24.01.13
Google galaxy nexus

Reputation:-  1  +

Do you have two different "Internet" in the apartment comes 2 lace?
The modem has only one wan port, I don’t think it can be configured
No 1 cord 2 different tariffs, switch from one to another, by entering the network --- wan of another User Name:
How to make it so that you do not constantly go into the settings and do not change the user. you can automate it like that. using a script or something else

Post has been editedRurouny - 16.10.14, 19:44
ctich
Message#20
16.10.14, 22:07
Guru
*********
[offline]

Group: Moderators
Messages 14704
Check in: 04.05.09
Apple iPhone 7

Reputation:-  1715  +

* Rurouny
Here I do not even know, never came across this: scratch_one-s_head:


--------------------
vvviiittt68
Message#21
31.10.14, 20:24
Visitor
**
[offline]

Group: Active users
Messages 17
Check in: 03.12.13

Reputation:-  1  +

There is a desktop PC and two laptops (2-room flat). Is it possible on this model to distribute the speed of traffic between them ... well, for example, 3 Mbit / s per each? sek.kakoy section of the router settings need to open?

156 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 04/18/19, 15:00