F.A.Q.
Q: How to increase battery life?
A: Disabling the function: Screenshot, shake!
(Settings ->Specialist. the ability to uncheck the box (check box) Screenshot (Allows you to take a screenshot when shaking)
A screen shot can and should be done, by simultaneous (simultaneous) pressing of buttons; Volume - (minus) and On. Off.)Q: Does the smartphone support OTG?
A: No
Q: What display is installed in the smartphone?
A: TFT
Q: Are all three SIM cards active?
A: Unfortunately not, because ONE radio module is installed in the smartphone.
Q: Can I turn off 2 OR 3 SIM?
A: Yes you can. Settings menu / SIM card management and choose which SIM card to keep working.
Q: How to enable 3G?
A: In addition to enabling data transfer on a specific SIM card, you also need to go to Settings - Wireless networks - More ... - Mobile network - 3G service - Enable 3G mode - Select the SIM card on which you want to turn on 3G. Alternative method: Settings - SIM card management - Video call - Select SIM card, in this case 3G is automatically activated on the SIM card selected for video calls.
Q: What material is the case made of?
A: Plastic.
Q: Are OTA updates supported?
A: Unfortunately not.
Q: In which case the warranty is lost?
A: Getting ROOT`a.
Q: Is it possible to screw the kernel from another device to the firmware of this device?
A: NO! GET BRICK!
Q: How to install different ringtones on SIM cards?
A: The program Dual Sim Ringtone to help.
Q: UBOOT CHECKSUM FALED error appeared during the firmware "
A: Go to the firmware folder, find the file Checksum.ini, open it with a notepad and change the line CHECKSUM_SWITCH = 1 to CHECKSUM_SWITCH = 0, you can also delete the file itself.
Q: Is there autofocus?
A: No autofocus.
Q: Which wired headsets are compatible with the device?
A: Fit headsets with pinouts
LRMG (OMTP)(released until 2012), as well as modern headsets with pinout fit through the adapter "CTIA and OMTP headphone converter" ("miniJack-miniJack FiiO")
LRGM (CTIA).
Read more ...The working scheme of soldering for full-fledged work with three-button headsets:
http: // cs3-1.savagemessiahzine.com.to / 5262109.pngQ: Can I record a telephone conversation through the regular “dialer” of firmware 1.10?
A: Yes, you can. During a conversation, press the touch menu on the left, "start recording" appears, writes to the memory card.
Q: How on firmware 1.10 (Android 4.4.2) to go to the task manager? A long press on "Home" brings up the browser.
A: Double tap on the "Home" button.
Q and A:
How to enable USB debuggingQ: How to turn off the vibration of the subscriber response?
A: With GravityBox -
Explay Atom / Explay Fire - Discussion (Post tweed_man # 43416552)Q: When I try to install the program, the smartphone complains about the lack of memory, while the SD card is full of space. How to overcome it?
A: Even if there is no external SD card, the internal memory is divided into two sections: for programs and for data. Applications are placed in the internal memory of the device, intended for installing applications. The size of this section is small - on our Explay Atom only 1.27 GB. Some of the installed programs can be transferred to the SD card or, if it is not available, to an internal memory area dedicated to data. To do this, you need to go to Settings - Applications, then select a specific application and click the "Go to SD card" button (translated crookedly). Not all applications allow you to transfer yourself to the SD card, with applications preinstalled in the firmware, this is not exactly possible. However, in this way part of the internal memory can be freed. You can also try to remove the pre-installed applications, but for this you need
root rightsand a third-party application manager, for example,
such.