Head units on the RK3066 platform (Android JB / KK) -savagemessiahzine.com

> savagemessiahzine.com >Other devices >Car devices >Car and Android devices

Head units on the RK3066 platform (Android JB / KK)

22.03.14, 17:17 | #101
●
Friendssavagemessiahzine.com
Rep: (3)

Head units with an RK3066 processor - Discussion

HuiFei, KaiGeLe, KGL, Klyde, KLD, HotAudio, GS, RoadMaster, RM, JY, Pure Android, 4.2.2, 4.4.2, 4.4.4, KitKat, RockChip, RK3066, Dual-Core
ATTENTION: There are other forum threads related to this one. You are kindly requested to create messages in the right branch:
Discussion пїЅ | New discussion of PG on RK3066 / RK3188 пїЅ | Discussion MCU and hardware пїЅ | Modification of software and decorations пїЅ

If everything works for you, then you do not need to report this. If something does not work - report.

Before asking a question, lookAndroid OS FAQandGlossary. Respect your and other people's time.
To compare the device with competitors and on the choice of devices, please contact:Selection and Comparison.
Before posting photos, read the topicWorking with Images on the forum.
Messages that are not related to the topic of discussion (offtopic), and / or do not contain relevant information (garbage), are deleted without warning.

Important notes regarding the discussion of 3G / 4G modems and rotors (since 11/04/2015):
- allowed to initiate a discussiononly those Modems and routers, on packaging or in documentation of which clearly spelled out compatibility with the Android operating system ;
- posting messageson other models of modems and routers allowed only if the message contains ready-made instructions for using a modem (router) with our GU ;
- other messages about modems and routers will be deleted without warning .

Appearance (photo)

Link to the message with photos of the "entrails" in good quality:Head units on the platform RK3066 (Android JB / KK) (Post Liten # 41373917)

How to understand whether the purchased GU is suitable for discussion in this thread

Head devices on the platform RK3066 (Android JB / KK) (Post # 32628710)andHead devices on the platform RK3066 (Android JB / KK) (Post # 34288167)

Specifications

Processor: RockChip RK3066 1.6 GHz Cortex A9 two cores (overclocking is possible up to 1.8 GHz provided cooling is provided)
Graphics coprocessor: Mali-400MP4 four cores, 250-400 MHz
RAM: Samsung DDR3 1 GB
Radio tuner: Philips 6624
WiFi adapter IEEE802.11b / g / n
GPS receiver: U-BLXO G6010 ST

- Operating system: Android 4.2.2 / 4.4.2 / 4.4.4
- Video resolution: 1080p (1920x1080 pixels, progressive scan)
- Internal media (storage): NAND 8 GB
- Processor: dual-core A9
- RAM: DDR3 1 GB
- Support for OTA updates (in fact there are no factory firmware)
- Capacitive touch screen
- The function of "mirroring" (Miracast) for iOS and Android (4.2 and higher)
- Change the start screen at the user's choice (more than 30 built-in options)
- Support for remote control buttons on the steering wheel of a car
- Support 3G / 4G modems
- Built-in WiFi-adapter
- Screen resolution: 800x480 pixels (there are modifications with a 1024x600 screen)
- Built-in microphone, support for external microphone
- Support for USB-camcorder standard UVC
- Support for AV-rear view cameras (in new firmware - and front cameras)
- 2 or 3 (depending on version) USB port

FAQ

Q: How to boot the device in recovery mode?
O1:Press simultaneously the hardware reset buttons (Reset) and on (Power). After 5 seconds, release the reset button. When the image appears on the screen, release the power button. The device will boot into recovery mode.
O2:~~For devices without hardware buttons, the method described here may be appropriate:Head units on the platform RK3066 (Android JB / KK) (Post Nomad13 # 41062708)~~
O3: All information is summarized here:Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 44580369)

Q: What is MCU?
A: In short: MCU (Microcontroller Unit) - is an independent computer, made on a separate motherboard has its own processor, memory, and programmable inputs and outputs. Peripherals - radio (radio tuner), DVD-player, speakerphone Bluetooth, low-frequency amplifier and other - connected to the MCU. Another part of the head unit - the computer running the Android operating system - interacts with the MCU, transmitting commands to it. More about the MCU can be found in detailhere (in English).

Q: What is the difference between device modifications?
A: The device is intended to replace the regular head car device. Various modifications are intended to be installed on the specific vehicle models and different performance body kit and location of hardware buttons and controls, sometimes more - screen size and the number of USB-ports. At the same time, the "e-filling" of all versions is almost identical, so the firmware for all models are unified. There are also differences in used MCU. In particular, there podplatformy KGL six (6) MCU options, while MCU firmware distinguished by the presence or absence of figures in the name of the archive with the firmware image. When you update the firmware MCU to be used only "with his number" (or without it, if you have such a MCU). If you find a firmware newer version, but not with your figure, it only indicates that your firmware yet. As someone "will produce" so soon and publish - and yet wait.

Q: What are the firmware files?
A: The file for the firmware usually includes two files -mcu.img and update.img . The first file is the MCU firmware image, the second is the Android system image. Sometimes a bundle may contain more than one version of the mcu.img file, intended for various modifications of the device (see the answer to the previous question).

Q: Can I customize the firmware myself (for example, resize partitions, add / remove / replace system applications, etc.)?
A: It is possible, but this applies only to the firmware of the Android subsystem (but not the MCU). Information on methods and techniques, as well as on the software used, can be found in this topic:Firmware devices on the Rockchip 3066 platform (rk3066). Brief instruction -here.

Q: When I try to log in to the "Factory Settings", a password is requested. What is he like?
About: 126

Q: Does the radio support the вЂњSovietвЂќ VHF band (65.0 - 74.0 MHz)?
A: Yes, it does. But for this, in the вЂњFactory SettingsвЂќ tab on the вЂњRadio BandsвЂќ tab, select the вЂњORITвЂќ option (then there will be only VHF without FM) or вЂњRussiaвЂќ (then there will be VHF and FM)

Q: I want to install the application from the Play Store. And either I do not find it, or I see the message "Not supported on your device." What to do?
A: Take advantagethisrecommendation.

Q: Which GPS chip is installed in the device?
ABOUT:Here is a photo

Q: I lost (broke) the connector of the "power" cable connected to the socket of the device. Where to get this?
About: Readhere. Just keep in mind that the location and marking of the wires do not match, so you will need to rearrange the terminals in the connector.

Q: Where can I find out the pinout of the device connectors?
A: hereherelaid out photo stickers on the case, which shows pinout.

Q: Which 3G / 4G modems are supported (and not supported) by the device?
A: Here is the available information (note that the links provide information not only on working modems, but also on non-working ones):
ZTE MF626:Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 31194327)
HUAWEI E173, E1550, E392:Head units on the platform RK3066 (Android JB / KK) (Post Alex2208 # 31199748)
M100-1, M100-3, E3131 (MTS420S):Head units on the platform RK3066 (Android JB / KK) (Post jangolen # 32360658)
HUAWEI E1750:Head units on the platform RK3066 (Android JB / KK) (Post OlegSPb # 31434967)
E367u-2, E171:Head units on the platform RK3066 (Android JB / KK) (Post fobos.alx # 32406003)
ZTE MF112:Head units on the platform RK3066 (Android JB / KK) (Post lodo80 # 32635848)
HUAWEI E392:Head units on the platform RK3066 (Android JB / KK) (Post Alex2208 # 32558855)
HUAWEI E3372s / E3372h:Head units on the platform RK3066 (Android JB / KK) (Post ade081500 # 41104978) Head units on the RK3066 platform (Android JB / KK)
Yota (LU150):Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 33100646)
Butlist of supported modems sent by the Chinese seller. Unfortunately, there are already inaccuracies in this list.

Q: How to connect the remote control buttons on the steering wheel to the device?
A: From the side to connect a device with three pins called KEY1, KEY2 and K_GND. At the last of said contacts when the operating device appears "mass", and the first two - voltage within 3,3-5 volt. If your machine is only one block of buttons to two outgoing wires, the first check is not closed if any of these two wires to ground. If closed, it connect its K-GND, and the other wire to the KEY1 or KEY2 - by choice. The second "KEY" without seeing-use and leave "hang in the air," pre-insulated. If you have two buttons to block or one block with three wires coming out, then we do the wiring on two chains - KEY1 / K-GND and KEY2 / K-GND.

Q: How to connect the rear view camera correctly?
O1: Readhere.
O2: Here with a picture:Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 41318431)

Q: What kind of piece of wire sticks out from the hole on the back wall?
A: In this way, the developers brought the antenna of the WiFi-receiver out of the metal case.More information.

Q: Does the device have an integrated analog or digital TV tuner?
A: In the standard package, there is neither the one nor the other (exception is GU вЂњKLDвЂќ with an analogue TV tuner preloaded on the board). The option of installing the tuner (ad-soldering to the board) is not excluded. In addition, you can buy an external DVB-T / DVB-T2 tuner connected to the rear connector and controlled from the device interface.

Q: How to memorize radio stations?
ABOUT:here

Q: How to connect an OBD adapter (type ELM327)?
A: First you need to turn on the app "Handsfree" ( "the Bluetooth", "Blue tooth") and there search for OBD-adapter, and then pairing with it (the standard access code 0000, 1234 or 1111). And only then we need to run the program Torque and there choose the adapter. It should also be noted that the staff of the program, through which produced "pairing" with an adapter recognizes only those adapters that have a Bluetooth-name "OBD". Esl your adapter has a different name, the system will "not allow" it to work. Treatment - decompile, correction and compilation of new system applications and MTCBlueTooth.apk Settings.apk. The essence of the patch - the replacement of the original code word "OBD" to the name that has your adapter. The difficulty is that for each option name you need to do personal assembly of these two applications.

Q: How to get root-rights?
O1: If Android 4.2.2 is installed on your GU, then readhere.
O2: If 4.4.2 or 4.4.4, then~~A "custom" method of obtaining root-rights has not yet been found. An accessible way is to install a custom firmware in which root-rights are pre-wired.~~read here:Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 41331307)
O3: In firmware released since March-April 2015, there is a built-in root, but it is not activated. Activation requires a few simple steps:Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 42385325)

Q: There was a manual in English in the kit, but I couldnвЂ™t have it ... Where would I get a Russian manual?
O1: Not a problem.Here he is (raise reputationfor the work of a colleagueAlex2208).
Earlierthe samelaid outmanual in electronic form in English(and we don't forget there eitherraise reputation).
O2: Russian manual for CarDroid devices. Fully suited to us (with the exception of the voice assistant section):Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 41584468)

Q: Is it possible to force a regular music player to play not one selected folder with files, but all the media containing many folders and subfolders with music at once?
A: Yes, you can. We readhere.

Q: Finish the game with the firmware. Now I have a "brick". Where is it? In the trash?
O1: Calm, only calm! The device can be restored:we read.

Q: Screen density, DPI - what is it?
About: Readhere.

Q: How to install the corrected (modified, alternative) system applications (APK files) into the system?
O1:Here. And here's anotherhere- using the example of replacing Settings.apk. Andhere.
O2: Detailed instructions givenhere. BUThere- educational pictures.
O3: New large and detailed instructions:Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 41578643)

Q: Does this GU have a sleep mode? And then there are situations - I braked at the stall to buy lollipops, returned to the car, and the State Administration should be launched again and wait until it is loaded.
O1: Unfortunately, we do not have a full-fledged (and regulated) sleep mode. But it is noted that if you turn off the ignition and turn it on again for 30-40-60 seconds (different users have different data), the PG will immediately be ready for operation. In other words, it still does not turn off immediately after switching off the ACC / ignition, but with some delay.
O2: In the relatively recent versions (approximately, since May 2015) of MCU firmware for the KDL platform, there was a function of a full shutdown delay for the selected time - from 10 minutes to several hours. Thanks to the efforts of our membersdarkleo and kumarai the same firmware for other platforms began to be created. See under the spoiler "Firmware" (below).

Q: I'm trying to pick up a USB camera for the DVR application (Car Record). I tried several different ones, but some of them do not work at all, but with others there is a вЂњpictureвЂќ, but it gives an error when writing.
A: Unfortunately, support for USB cameras is a long-standing sore question for Android. There is no full support. Although they write that they should be supportedUVC-cameras, but in practice everything depends on the specific device, specific camera and specific application. In particular, with our regular "DVR" application, the camera works at the very least, as in the photo inthis message.

Q: I set up the remote control buttons on the steering wheel to switch tracks, but it turned out that they work only for factory programs. And I listen to music through a third-party player. What to do?
A1: All is not lost. Our colleague from a foreign forum "XDA Developers" wrote a program that allows you to switch rivers with steering buttons in third-party players.Details. It should be noted that this program is constantly being upgraded in terms of increasing functionality.
O2: There is also an alternative to the above utility - from our user petrows. It can be downloaded in the Market - look there for the key phrase "com.petrows.mtcservice ".

Q: They say that there is a place on the board of the radio tape recorder for decoupling the antenna amplifier. Is it possible to "organize" it yourself?
A: Experience is,we read.

Q: Problems with the Torque program and OBD adapter.
A: Read, startingfrom here.

Q: I do not like the graphic design of some applications. Can I independently replace the elementary images that make up the appearance?
A: Yes, you can. Very brief instructionhere. Want details - look for the forum outside of this branch (general questions about Android or something like that).

Q: According to the instructions, I choose the GPS application. I want them to be Google Maps, but they are not in the list of applications. What to do?
A: This happened on very old firmware versions. Now everything is fixed.

Q: How can I replace bootanimation with my own?
O1: Readhere. This post also has a ready-made custom butanimation file. You might like it.
O2: In addition, below in the cap under the spoiler "Butanimation" you will find a link to a large selection of custom butanimations.

Q: Does this GU have the ability to take screenshots (screenshots) without having to install additional programs?
O1: Yes, there is.Heredetails are described.
O2: In new versions of firmware, you can "hang out" in the status bar a special button-icon to instantly take screenshots.

Q: Is it possible to work with PG via ADB via USB cable?
A: It is possible. But only through the so-called USB / OTG-port, which is not available on all models GU. At the same, where it is available, the port is usually located on the front panel (possibly under the cover) and is designed as a mini-USB jack (although there are other options). To put that port in client mode to be able to work with the State through the ADB, you need to go to the "factory settings" and enter a special password "adbon" instead of the default password is "126". After entering the password and pressing "OK" instead of an interface "factory settings" you will see a pop-up message "ADB is ON". Disable mode - through "adboff" password.

Q: What is the maximum amount of supported memory card (micro SD)?
A: Officially - 32 GB. Nevertheless, there is information about the successful operation of the 64 GB card.Here.

Q: Navitel does not switch skins from day to night and back. What can be wrong?
O1: The answer is readhere.
O2: InstallXposed Framework, and to it - the module "Navitel". And you will be happy.

Q: How to get rid of the shutdown of the GD when the car engine is started, when the key is transferred from the "ignition" position to the "starter" position?
A: The method of treatment is described.here.

Q: "From the factory" on my GU, Android 4.2.2 is installed. Can I install the firmware on it from Android 4.4.2 or 4.4.4?
A: If you are 100% sure that your GG coincides with those discussed in this thread of the forum, then the answer is: Yes.

Q: Can I install on my GU firmware from another platform - for example, my GU on the KGL / HuiFei platform, and I want to install the firmware from KLD / Klyde?
A: The Android components of the firmware (update.img file) are practically compatible with each other. Therefore, you can install a вЂњforeignвЂќ firmware, but only for the Andriod part (the only requirement is that the firmware should correspond to your screen resolution).
MCU firmware (mcu.img file) are incompatible with each other - only native firmware can be flashed.

Q: OTA update is not installed. The package starts to download, but the download stops.
A: On the GPS-card (OTA-updates are downloaded to it, there is not enough free space to accommodate the package being downloaded. Either the card is missing or defective.

Recovery (Recovery - emergency OS) / Bootloader (bootloader - preloader)

To date, the following methods are known for entering these modes:Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 44580369)

Firmware

ATTENTION!
FIRMWARE FIRMWARE IS A TECHNICAL AND COMPLEX PROCEDURE AND REQUIRES THE AVAILABILITY OF THE OPERATOR OF A DEFINED LEVEL OF KNOWLEDGE AND SKILLS.
PERFORMING FIRMWARE INDEPENDENTLY, YOU DANGER THE DEVICE RISK OF RETURN-FREE LOSS OF WORKING CAPACITY.
IF YOU DON'T STOP THE ABOVE WARNING, THEN REMEMBER THAT EXECUTING THE FIRMWARE, YOU ACT ON YOUR OWN RISK AND RISK, AND FOR THE CONSEQUENCES OF SUCH FIRMWARE, THE PERSONALLY PERSONALLY RESPONSIBLE PERSONALLY YOU AND YOUR COURSE OF YOURSELF.
FORUM ADMINISTRATION FOR THIS RESPONSIBILITY IS NOT RESPONSIBLE

Regular (factory) firmware

Link to the centralized storage of firmware on Mega.nz
Mirror of the centralized storage on the Yandex disk (Attention: not updated since May 15, 2015)
Pay attention to the firmware index : KGL - for devices HuiFei / KaiGeLe, GS - for devices Hot Audio, KLD - for devices Klyde, RM - for devices RoadMaster. In the "Android" part (update.img), different types of firmware (platforms) are interchangeable with each other, in the MCU part (mcu.img) - absolutely not (although it is easy to reinstall the native mcu.img).
Link to the storage of old firmware versions (Android 4.2.2 Jelly Bean)that are removed from the main repository. All questions on this link address deargormiza
Link to a website in Germanywhere the firmware is also stored.
Link to the forum of the manufacturer Joying (platform JY)where also lay out the firmware.

In the laid out sets of some firmware there are two (or more) MCU.IMG files. Different files are designed for different modifications of the head unit. In addition, the MCU firmware as separate image files or archives with such files are also laid out separately in the hierarchy of centralized storage folders.
Please do not ask to post any firmware in the branch that you did not find in the repository. The repository is periodically replenished, and if your "customized" firmware is not there, then it is meaningless to ask for it, because nobody has it,

Custom (converted) firmware

Alternative MCU firmware

fromdarkleo with the support Sleep mode : Head devices on the platform RK3066 (Android JB / KK) (Post darkleo # 40943198)

IMPORTANT AFTERWARD ACCESS TO ACCESS TO FIRMWARE

We kindly ask you to realize that this is not a technical support service, but just a forum . therefore :
First: No one here owes you anything. Firmware is laid out on a voluntary basis as they are received and links are found on other resources and in this thread
Second: If you did not find the desired firmware for the links above, then no one is to blame
Third: If the link to download firmware is not available, then no one is to blame either
Fourth: If you find a firmware on another resource or in this thread that is missing here, then instead of complaining about its absence, give a working link to it

Instructions

Full firmware

Exists two possible ways device firmware:

Firmware from operating mode
Firmware from recovery mode

Regardless of the method chosen, you first need to place the firmware file (s) (mcu.img and / or update.img) in the root of the microSD card with the FAT or FAT32 file system. The presence of other files on the card that are not related to the firmware is not regulated (but it is still desirable that they do not exist).
Method number 1 (from operating mode): insert the card into the slot prepared for the "GPS-map." You should see a message about the discovery of the card firmware file and offer to upgrade. If you really intend to update the firmware, select yes option. The device will automatically restart in recovery mode, which will be updated and the firmware. When finished, the device will restart automatically during operation. This may again be prompted to update the firmware. This time should be answered in the negative, and then delete the firmware file from the card (or do not use this card) to such proposals no longer arise.
Method number 2 (from recovery mode): Load the device in recovery mode (see FAQ, above) with a prepared card inserted in the "GPS-card" slot in advance. Move through the menu, select " update system / mcu image from / sdcard "After that, the firmware will be updated, and the device will remain in recovery mode. You need to reboot it into working mode manually by selecting the menu item" reboot system now ". But before that, it is desirable to remove the firmware card in order to prevent the display of the upgrade offer.

Notes:

the absence of one of the files on the card (mcu.img, update.img) will entail a partial firmware (either Android or MCU, respectively)
Firmware method number 2 when using TWRP-recovery is impossible due to the specificity of the update.img format (this is not the ZIP-archive with which TWRP-recovery works), as well as the impossibility of MCU firmware

Firmware individual images

In some cases, it may be more convenient not to completely flush the GU (with loss of data and user applications), but to flash only individual firmware images. It is allowed to flash separately the boot.img (boot loader), kernel.img (Linux kernel) and recovery.img (emergency boot loader, recovery) images. Instructions givenhere.

Self rebuild firmware

Up to image level:Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 41545722)
Up to the file level (+ replacement of factory applications):Head units on the platform RK3066 (Android JB / KK) (Post booroondook # 41578643)

Hardware improvements

The control does not work with the buttons of the steering wheel, the buttons do not learn: we lookhereorhere. You can find out if your device needs this revision.this technique.
Direct control of the sound processor, bypassing the MCU:here. And somethe details.
Hardware control of the LOUD mode and equalizer:here.
Installing the cooling fan and replacing the low-frequency amplifier -here.
Option to connect an external microphone:here.
The experience of restoring GI after "scaling":here.

The ability to turn on the PG when the ACC is off:here.
Installing DigitalCar Brightness Control -here.
A variant of the implementation of the delay of complete shutdown of the PG when the ACC is turned off:read here.
Option to connect an external microphone to the Bluetooth module:here.
Sleep and Shutdown Control:Head units on the platform RK3066 (Android JB / KK) (Post # 36316394)
Radio soldering:Head units on the platform RK3066 (Android JB / KK) (Post # 36369643)
Improving the performance of USB ports:Head units on the platform RK3066 (Android JB / KK) (Post # 36550717)
Nutrition Improvement:Head units on the platform RK3066 (Android JB / KK) (Post # 36817798)
Button to move through the recovery menu (for those who do not have the appropriate hardware):Head units on the platform RK3066 (Android JB / KK) (Post kumarai # 37996050)
OTG:Head devices on the platform RK3066 (Android JB / KK) (Post # 37178886)
WiFi antenna upgrade:Head devices on the platform RK3066 (Android JB / KK) (Post # 37683510)

Software improvements and useful programs

Change screen density:hereandhere (screenshot).
Several tweaks:here.
TWRP-recovery:here.
Solving the problem with non-reproduction APE.
Software emulation of pressing hardware buttons and steering wheel buttons:here.
Useful programs "Car Audio Service" and "SDVC GALA":here
Microntek Service App - here:Head units on the platform RK3066 (Android JB / KK) (Post # 36816002)
Program for building a script for autoloading services and applications:Head units on the platform RK3066 (Android JB / KK) (Post Malaysk # 40843663)
Several useful tools from a respectedMVG-V70 : Head units on the platform RK3066 (Android JB / KK) (Post MVG-V70 # 41212085)
Putting the media player to pause when going to sleep (message in the next branch):Discussion of head devices on the platform RK3188 (Android KK) - Discussion (Post 7floor # 42956795)

Other Utility

Additional passwords at the entrance to the factory settings:Head units on the RK3066 platform (Android JB / KK) (Malaysk Post # 41230176)
Equalizer adjustment:Head units on the platform RK3066 (Android JB / KK) (Post kumarai # 40757398)
A collection of screenshots showing the visual differences between the platforms (collected and preparednblx nox): Head units on the platform RK3066 (Android JB / KK) (Post nblx nox # 43900439)
Customized screen clock options (assembled and preparedDuk): Head units on the platform RK3066 (Android JB / KK) (Post Duk # 43926440)
Substitution of the standard вЂњHands-freeвЂќ ringtone:Head units on the platform RK3066 (Android JB / KK) (Post Duk # 44129359)

Bootable animation files (butanimation)

ATTENTION: If the animation from the downloaded file is displayed at you "on the side" or with distorted proportions, then open the archive and swap the width and height values вЂ‹вЂ‹in the first line of the file. desc.txt located at the root of the archive. For example, if there is "480 800 15", then replace it with "800 480 15" - that is, change the positions "800" and "480".
FromDreaman_KML: Head units on the platform RK3066 (Android JB / KK) (Post DreaMaN_KML # 34540244)
FromProvocateur: Head units on the platform RK3066 (Android JB / KK) (Post Provocateur # 38804854)

Additional Information

Video demo recovery mode (Youtube)
Another video
And further
Topic discussion of similar deviceson XDA Developers
Differences in MCUs:here
Creating a dump of a working device:here
A selection of information on our GU. Startfrom here
The scheme of interaction between the state modules
Document: Visual differences between GU on different platforms:here

Old (original) content of the first post

guys hello
ordered just such a head for x5 e53 from China.
http: //www.aliexpress...apshot/6023337920.html

Put (40 pin connector from the native into this one).
2 days worked, and then hung on the BMW logo.
Rezet does not help. first, it displays an Android download image, then a screen with a BMW logo comes out, and thatвЂ™s it.
SCRL button can turn off-turn on the device.
drive back and forth swallows, spits out.
lights from the dimensions lit.

otpisal to the Chinese, speak with their engineers will think what to do and what they feel sorry for ...

Have thoughts what to do to revive the animal?

For filling caps, pleasecontact the curator through the private messaging system (QMS).

At the same time, the request is not limited to hints, but to write specifics - a link to the message (or the full text of the information), how to title it, in which section (spoiler) of the header to be placed.

The results of the survey

Type of GU you are using.
Select the option that matches your platform and screen resolution (for the "Other" options, please unsubscribe in the branch)
KGL (HuiFei) 800x480 [184] ** [23.41%]
KLD (Klyde) 800x480 [188] ** [23.92%]
GS 800x480 [70] ** [8.91%]
JY 800x480 [37] ** [4.71%]
KYD 800x480 [9] ** [1.15%]
MX 800x480 [7] ** [0.89%]
RM (Road Master) 800x480 [5] ** [0.64%]
Another 800x480 [38] ** [4.83%]
KGL (HuiFei) 1024x600 [85] ** [10.81%]
KLD (Klyde) 1024x600 [52] ** [6.62%]
GS 1024x600 [4] ** [0.51%]
JY 1024x600 [41] ** [5.22%]
KYD 1024x600 [26] ** [3.31%]
MX 1024x600 [1] ** [0.13%]
RM (Road Master) 1024x600 [0] ** [0%]
Another 1024x600 [39] ** [4.96%]

Post has been editedbooroondook - 21.11.15, 12:36

Reason for editing: data update

23.04.14, 14:03 | #102
●
Friendssavagemessiahzine.com
Rep: (2)

Mamai72,
It's sad, is such a small screen is, and it is very convenient. Strangely enough, the other models from the Chinese are normal kanbasom, do these other dumber Chinese :)

23.04.14, 14:09 | #103
●
Friendssavagemessiahzine.com
Rep: (1082)

HG1 @ 23.04.2014, 10:28

I was sent on April 19, it is now in the EMC on Vernadsky sorting, trying to pick up the evening go

Congratulations. At the same time we are waiting for the story about the new postal and customs regulations (if they already exist).

23.04.14, 14:15 | #104
●
Friendssavagemessiahzine.com
Rep: (2)

booroondook,
about any rules? up to EUR 1000 per month as you can get. if there were some inconsistencies, I think customs would be braked? Merchant specifies the full value in return, I asked about this

Post has been editedHg1 - 23.04.14, 14:31

23.04.14, 16:52 | #105
●
Friendssavagemessiahzine.com
Rep: (1082)

HG1 @ 23.04.2014, 11:15

about any rules? up to EUR 1000 per month, you can also receive

Well, there was talk about lowering this amount to 150 EUR per month this year. Just do not understand - has introduced the new rules or not.
Here is:http://news.mail.ru/politics/16648197/

23.04.14, 17:18 | #106
●
Friendssavagemessiahzine.com
Rep: (7)

HG1 @ 23.04.2014, 14:28

I was sent on April 19

so fast, so do not believe it))
I took off today trekв„– (EMC), somehow I do not hope for the same speed)
I still have to wait for Peter (reindeer)

Post has been editedOlegSPb - 23.04.14, 17:20

23.04.14, 20:13 | #107
●
Friendssavagemessiahzine.com
Rep: (40)

s s @ 23.4.2014, 12:41

2nd video from 46 seconds

http://www.youtube.com/watch?v=WRk9xeC4oCQ

http://www.youtube.com/watch?v=dr7tps12KAk

Thanks. I was more like the menu))) there is then the desired item

23.04.14, 20:26 | #108
●
Friendssavagemessiahzine.com
Rep: (40)

Today came anotherGU brotherHover to 3/5. Screenshot of the problem attached. It is treated, or ...?

Post has been editedAlex2208 - 14.05.14, 12:57

23.04.14, 21:04 | #109
●
Friendssavagemessiahzine.com
Rep: (7)

Alex2208 @ 23.04.2014, 21:26

the problem

puzzled already, waiting for the same ((
and the antenna where there is?
Navitel what?
license or radio was?

Post has been editedOlegSPb - 23.04.14, 21:06

23.04.14, 22:04 | #110
●
Friendssavagemessiahzine.com
Rep: (40)

OlegSPb @ 23/04/2014, 22:04

and the antenna where there? Navitel what?

The antenna is on the window sill, Navitel 8.7.0.55, of course ... License tracker. The point seems to be not the case (the same package is installed in Pipa 6 and Lenovo 820), and in a distorted GPS chipset. Maybe someone here knows how to deceive.

24.04.14, 06:30 | #111
●
Friendssavagemessiahzine.com
Rep: (1082)

Alex2208 @ 23.04.2014, 19:04

Navitel 8.7.0.55

Well, except Navitela, still in some kind of the GPS-programs and utilities that you check this?

24.04.14, 07:44 | #112
●
Curators
Rep: (716)

booroondook @ 24.04.2014, 07:30

Well, except Navitela, still in some kind of the GPS-programs and utilities that you check this?

Check here.

Attached file

GPSTEST.apk(206.69 KB)

24.04.14, 10:26 | #113
●
Friendssavagemessiahzine.com
Rep: (40)

Mamay72 @ 04/24/2014, 8:44

Check here.

I checked. The result on the face.

Post has been editedAlex2208 - 14.05.14, 12:55

24.04.14, 14:50 | #114
●
Friendssavagemessiahzine.com
Rep: (40)

Edit access do not have, continue ...
That's what surprises me: am I the only one? Citizens ponakupili devices with the same filling, and the only problem I have ?! What is it like?! My GPS chipset here on this U-BLXO G6010 ST, and that one?

24.04.14, 15:10 | #115
●
Curators
Rep: (716)

Alex2208 @ 24.04.2014, 15:50

That's what surprises me: am I the only one? Citizens have bought devices with the same filling, and the only problem I have ?! What is it like?! My GPS chipset here on this U-BLXO G6010 ST, and that one?

I have a radio in the 4.1 also catches of 5-6 satellites, but it works fine.
I think the GPS module firmware curve. We had a 4.1.
I thinkyou will understand.

Post has been editedMamay72 - 24.04.14, 15:28

24.04.14, 15:36 | #116
●
Friendssavagemessiahzine.com
Rep: (7)

Alex2208 @ 24.04.2014, 15:50

My GPS chipset here on this U-BLXO G6010 ST, and that one?

I is similar in description
Chipset: U-BLXO G6010 ST (Import by Swizerland)
including already shaking, pancake))
and what exactly the entrails will show only opening (hopefully this will not happen)

Post has been editedOlegSPb - 24.04.14, 16:02

24.04.14, 21:54 | #117
●
Friendssavagemessiahzine.com
Rep: (40)

OlegSPb @ 24/04/2014, 16:36

and what exactly the entrails will show only opening

And this would be. chipsetUBX-G6010-STfrom cheap noble family of U-BLOX. Mamay72 likely right about the firmware of the curve. Today wrote to the Chinese - thinking. Although at first offered, and an antenna placed in an open area and inquired if I have a soldering iron and tin. Let's wait and read on the HDA. I am on this subject HDA started reading back when there were only three pages. A little distracted and have no clue. Now, just try to find the right!

24.04.14, 22:33 | #118
●
Friendssavagemessiahzine.com
Rep: (7)

Alex2208 @ 24.04.2014, 22:54

HDA started reading

I was there that does not understand the interpreter hard ((

29.04.14, 19:04 | #119
●
Friendssavagemessiahzine.com
Rep: (1082)

Here is a pancake!
Got it todaytape recorder.
EMS courier delivered. Sending is intact, everything seems OK, but on the inside, except for the radio, there was nothing - no cables, no GPS-antenna, neither manual nor the promised microSD-cards - in short, only the very "naked" radio in a plastic bag between the plastic " bumpers ".
He wrote an angry letter to the seller, and now do not know what to do - in fact, I even check it on working capacity can not - I have no such connections.
And one more thing strained.
In the description of designated support analog TV. And even in the photo there is a separate socket on the remote cable under the TV antenna.
On my own arrangement of connectors is different from the description on the website. And on the wiring diagram glued no mention of TV antenna I have not found.

29.04.14, 19:54 | #120
●
Friendssavagemessiahzine.com
Rep: (7)

A few days ago too I ordered from the same town, but the seller is different. Prior to this, I asked a lot of questions. Cable included should be a whole bunch, apparently you did not put the package with them. Let them know that leave a bad review, and a cable with additional bonus for mental suffering)))
And the pictures they have all distorted ... This shop from producerhttp://kaigele.en.alibaba.comit is closer to the truth must be

29.04.14, 20:34 | #121
●
Friendssavagemessiahzine.com
Rep: (7)

booroondook @ 29.04.2014, 20:04

He wrote an angry letter to the seller, and now do not know what to do

Does not confirm receipt of the order. open dispute indicates that it is not complete and requires the seller to supply the missing. the seller until you confirm receipt did not receive the money.
shame, sorry.
My only today from Moscow to St. Petersburg went.
I forgot to indicate the dispute exactly what is missing.
Although accessories translation as an accessory, can motivate both dopplatu generally HZ, the dispute is still open it, and see what happens
write the seller, that you open the dispute over not set, and demands the return of the entire amount, because you have on hand a simple piece of hardware and you are missing components in Russia can not be bought.

Post has been editedOlegSPb - 29.04.14, 20:59

1025 pages
« < 4 5 6 7 8 9 > »

Full version

Help rules

Time is now: 21/03/20, 6:48

©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com^®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement

Forum IP.Board © 2020 IPS, Inc .