[X]Assistant

[citrixserver]

Discussion: Huawei E5172

A photo:

Description:

4G / Wi-Fi-access point (router)
Wi-Fi standard: 802.11n
3G support
LTE support

Specifications:

General characteristics
Type 4G / Wi-Fi access point (router)
802.11n wireless standard
Built-in 3G support
Built-in LTE support
Reception / Transmission
Information Security WEP, WPA, WPA2
Router
The router is
Firewall (FireWall) is
NAT is
Monitoring and Configuring
Web interface is
VoIP
Number of FXS 1 ports
Additionally
Autonomous work is
Additional information connector for external antenna; RJ-11 port for connecting an analog telephone

Reviews:

Useful

Photos of the entrails
A set of firmware
Full specification of the router
All available information regarding access to Huawei E5172 via SSH
Instructions for changing IMEI and TTL

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links, or through QMS.

Post has been editedstp101 - 08.11.18, 00:05

Reason for editing: Instructions for changing IMEI and TTL

[Saymer]

Interesting information, and when trying to access these ports, did anything interesting happen?
Anyway, there should be engineering access. Only unfortunately, there is very little information on this model in the network, at least I could not find anything interesting.

[chuspp]

Login / password requests. But neither the root nor admin'u current admin password does not fit. I'll try some more vulnerabilities to look for.

[rash_b]

chuspp
huawei | huawei
try

[Saymer]

Gentlemen, there was a problem. He studied the topic about the Huawei B593 CPE and saw a mention there, about the fact that there is also a modification of the Huawei B880-75. The characteristics are the same.
But, the Huawei B880-75 has 2 SMAs and easy access for them, which is critical for me. I plan to use in the country with an external antenna. At the moment, Huawei E5172 is already available, and just the problem with connecting an external antenna to it. Here I think, go to pass it and take in return Huawei B880-75. I took in Citylink, but they have made them in different sections, and did not see what Huawei B880-75 they have available. One in the routers section, the other in the modems section.

[mxboy]

Saymer @ 05/12/2014, 4:30 PM

Huawei B880-75 has 2 SMA and easy access

Here isand datasheeton him.
I wonder how he is on the subject of buggy, Russian support in received SMS, and in general support ...?
By the way, is SMS supported in the original E5172 firmware?
In the one that from mega - supports.


Post has been editedmxboy - 12.05.14, 17:32

[chuspp]

And what are the problems with the external antenna? For example, I took a 4G kit to give, there the antenna went with a frequency of up to 2100 MHz, I had to take and take a normal 4G antenna.

[chuspp]

rash_b @ 05/12/2014, 17:12

chuspp
huawei | huawei
try

Does not pass.

[Saymer]

The problem is that the SMA connector is deep, and the SA-M112C RF connector is not screwed to it (http://www.antex-e.ru/…350x350/1265371527.jpg) purely physically, because the connector is large and closes most of the access to the nut. So you need to do some kind of adapter. And this is an extra loss of signal.

In Citylink they found fault with one scratch and refused to return. Though the factory film, and a box and in general a type of the new goods is kept. But here's the scratch, that's all. Renouncement. Wrote a claim, they said they will be considered within 10 days. I will hang an advertisement for the sale, because if all routers have the same platform, then the one with the SMA connector is easier to access.


The truth is, why is the Huawei B880-75 cheaper than the Huawei E5172. Where is the catch?
Maybe it is better not to change and leave?

mxboy @ 05/12/2014, 18:23

By the way, is SMS supported in the original E5172 firmware?

Yes, it does. But I did not try to send from him. But there is such an option in the WEB, and it’s written in the printed instructions. I have only one complaint to him about the inconvenient SMA connector, and that he is alone. And on the other there are two.

Post has been editedSaymer - 12.05.14, 21:39

[mxboy]

I'll see how the E5172 behaves in the country.
If all goes well, the router's board will move from the native case closer to the antenna, to the mast inhermobox.
MIMO is activated directly connected to the radio module.UFL pigtails(U.FL male / N-female) directly to which the antenna is connected.
At the same time, I’ll check how it all behaves when temperature drops.


Post has been editedmxboy - 12.05.14, 23:35

[Saymer]

By the way, yes, this is a great option. I did not think about it like that. By the way, I thought here that there is no point in taking Huawei B880-75. Because of the reviews of real owners, who have something else available, except for how he has not seen it on the network. There are three reviews on Y.Market, and all are negative. They write that the signal on the USB modem is better to catch. Also, he has a lot of unnecessary whistles and fakes for me. Such as DLNA, support for SD memory cards and other things. In general, this is all crap, which in fact is not needed.

Therefore, it is truerub it with alcoholHuawei E5172s-22 and keep it for yourself. They did not accept him well. And then, I would return, I would buy Huawei B880-75, I would have problems with it, and I could not return it back.

I decided here to bring some thoughts that appeared after reading the topic.CPE Huawei B593 - Discussion, stationary LTE router

1) As it became known, the router has access via telnet (or via SSH)
2) They use some kind of login and password, but the WEB password does not work. So another.
3) This password is clearly standard, and someone knows it. Well, anyway, once it was made.
4) The DC-Unlocker client program can work with the E5172 modem, because there it is possible to unblock it if it is locked. And as far as I can understand, the program connects to E5172 via telnet or SSH and gives commands to the direct to the modem.
5) Perhaps it was known, but in the subject I did not find any mention about it. Again, in another topic I saw a link to a resource. There is a fairly large collection of firmware for the E5172AS

Firmware collection

Folder / File Size Last Upload Download
E5172As-22 V200R001C00SP066_Spain_VDF_05012BYR.zip 40.67 MB x 3 Download
E5172As-22 V200R001C1141SP100_Madagascar_operatorValue_05012BXB.zip 39.52 MB x 3 Download
E5172As-22_V200R001C00SP063_Baltic Open Market_05011VWV.zip 158.21 MB x 3 Download
E5172As-22_V200R001C1060SP060_Denmark Brightpoint_05011WXW_MUL.zip 39.3 MB x 3 Download
E5172As-22_V200R001C1143SP051_Program Baltic Telia_05011RGM.zip 40.34 MB x 3 Download
E5172As-22_V200R001C1209SP100_Ghana Surfline_05011YXN.zip 39.68 MB x 3 Download
E5172As-22_V200R001C136SP060_Iceland Nova_05011UFT.zip 39.47 MB ​​x 3 Download
E5172As-22_V200R001C142SP050_Denmark Telia_05011RUT .zip 38.99 MB x 3 Download
E5172As-22_V200R001C142SP060_Denmark Telia_05011WQB.zip 39.69 MB x 3 Download
E5172As-22_V200R001C142SP061_Denmark Telia_05011YKK.zip 39.6 MB x 3 Download
E5172As-22_V200R001C209SP100_Russia Megafon_05012ADQ.zip 40.16 MB x 3 Download
E5172As-22_V200R001C307SP064_Spain YOIGO_05011VYY.zip 39.99 MB x 3 Download
E5172As-22_V200R001C375SP050_Saudi Arabia Zain_05011PGG .zip 40.88 MB x 3 Download
E5172As-22_V200R001C375SP050_Saudi Arabia Zain_05011PGG.zip 41.3 MB x 3 Download
E5172As-22_V200R001C418SP050_Latvia LMT_05011RQD.zip 594.39 KB x 3 Download
E5172As-22_V200R001C418SP050_Latvia LMT_05011RQD_MUL.zip 39.63 MB x 3 Download
E5172As-22_V200R001C418SP061_Latvia LMT_05011STQ.zip 40.11 MB x 3 Download
E5172As-22_V200R001C418SP101_Latvia LMT_05011YMJ.zip 40.81 MB x 3 Download
E5172As-22_V200R001C778SP061_Russia Open Market_05011UXQ.zip 113.5 MB x 3 Download

The truth is that registration requires registration there, but as I understand it is paid. But the fact that there are firmware, and with some need they can get happy.
6) By analogy with the Huawei B593, you can write your own firmware
7) On the Huawei website, you can download the source of the firmware, and probably there you can find a lot of useful information. Including password for root.
8) The E5172 router is a Linux-based router with a modem embedded in it and the necessary software.

P.S. And where should I turn to, so that the moderators would move this topic to the sectionWireless modems and mobile routers? IMHO, this topic is meaningfully more to ask there, besides in that topic there is a discussion of the previous model of the modem router.

UDP

Chuspp @ 05/12/2014, 11:55

Login / password requests.

Try
login: !! Huawei
password: @HuaweiHgw

Post has been editedSaymer - 13.05.14, 13:23

[mxboy]

It seems like someone on the gsmforum.ru in the thread about the unlocking of ZTE USB modems someone intercepted commands from the DC Unlocker to remove the lock and put them into the forum :)
If the unlocker does not communicate with the router via the SSH tunnel, then I think it is quite simple to intercept the login password with a sniffer.

And the stock firmware, pre-installed in the E5172 that is sold to us, is notE5172As-22_V200R001C778SP061_Russia Open Market_05011UXQ .zip?

I have a scab from Mega and she seems to be the only one that Megafon_05012ADQ.

password: @HuaweiHgw

By the way, the search for Yandex for this password still gives some variants of logins :)

Post has been editedmxboy - 13.05.14, 14:30

[Saymer]

[email protected], 14:06

Russia Open Market

As I understand it, she is. At least, from the topic about Huawei B593, by analogy to our modem. As I understand it, dearzzzeprIt has a source similar to that of the link above, and can put this firmware on trizheinfo. I think you can try to contact him about this.

[email protected], 14:06

one

Perhaps it was respectedvvevvevve? He did quite a lot of interesting research on modems, and I also realized that he wrote his firmware for Huawei B593. That is, if you wish, you can write your own. There are also sources available.

UDP
Yesterday I decided to look for the sake of interest, but what is in the file that is obtained as a result of running the modem diagnostics. The output is a filediagnose.tar which is archived in bz2 archive.

List of files from the archive after modem diagnostics

arp.txt
boot.log
brctl.txt
check_items.txt
curcfg.xml
defaultcfg.xml
ebtables.txt
ifconfig.txt
iptables.txt
iptables_nat.txt
modem_ver.txt
mount.txt
operateLog_export.txt
plt.log
pltcheck.log
ps.txt
route.txt
router_ver.txt
spisok.txt
sysmod.txt
top.txt
traceLog_export.txt
wlctl_isup.txt
wlctl_scanresults.txt
wlctl_status.txt

These files contain some interesting information, including a password hash, including for SSH access.

Excerpts from the curcfg.xml file

<X_ServiceManage TelnetEnable = "0" TelnetPort = "23" />
Here you can understand that the telnet service is turned off. But it can be included.

<ManagementServer EnableCWMP = "1" URL = "" Username = "" Password = "" PeriodicInformEnable = "0" PeriodicInformInterval = "7200" ConnectionRequestUsername = "acs" ConnectionRequestPassword = "acs" X_SSLCertEnable = "0" X_ConnReqPort = "80s">
This is the port, 8081, which showed the scanner. There is a mention about the login and password, but why it is needed is not clear.

<X_Web Timeout = "5" WebProtectionState = "0" ProtectionPages = "0,0,0,1," RandomString = "" DomainName = "homerouter.cpe" TmpWebProtectionState = "0">
Waiting time, and access settings to the WEB.

<UserInfoInstance InstanceID = "1" Username = "admin" Userpassword = "HASH ==" Pwdchanged = "1" RemindChangePwdEnable = "1" Email = "" TmpEmail = "" />
<UserInfoInstance InstanceID = "2" Username = "user" Userpassword = "HASH ==" Pwdchanged = "0" RemindChangePwdEnable = "0" Email = "" TmpEmail = "" />
Shech admin and user passwords. So there is a user account. But the admin hash is different from the user hash.

<UserInfoInstance InstanceID = "1" Username = "admin" Userpassword = "Other HASH ==" Userlevel = "0" />
<UserInfoInstance InstanceID = "2" Username = "user" Userpassword = "Other HASH ==" Userlevel = "1" />
Here the access level is specified, and the hash is different from what it was in the first case. Perhaps here is a password hash for ssh.

Also there are other current settings. That is, this file is a file where all current settings are stored.

There is also another file.defaultcfg.xmlit is probably used in some cases when it is impossible to load the main file with settings.

Content defaultcfg.xml

<? xml version = "1.0"?>
<InternetGatewayDeviceConfig>
<InternetGatewayDevice>
<DeviceInfo ProvisioningCode = "">
<X_PortalManagement Enable = "0" PortalUrl-Computer = "" PortalUrl-STB = "" PortalUrl-Phone = "" />
<X_ServiceManage FtpEnable = "1" FtpUserName = "ftp" FtpPassword = "ftp" FtpPort = "21" FtpPath = "/ mnt" TelnetEnable = "0" TelnetPort = "23" SambaEnable = "0" />
<X_Antenna status = "1" status2 = "1" autoenable = "0" />
</ DeviceInfo>
<ManagementServer URL = "" Username = "" Password = "" PeriodicInformEnable = "0" PeriodicInformInterval = "7200" ConnectionRequestUsername = "acs" ConnectionRequestPassword = "acs" PeriodicInformTime = "" X_SSLCertEnable = "0" X_BindInterface = "" KickUR "= X_SSLCertEnable =" 0 ” UpgradesManiam "30" X_ConnReqPort = "8081">
</ ManagementServer>
<Time Enable = "1"
NTPServer1 = "clock.fmt.he.net"
NTPServer2 = "clock.nyc.he.net"
NTPServer3 = ""
NTPServer4 = ""
NTPServer5 = ""
LocalTimeZoneName = "GMT-03: 00DST-04: 00: 00, M3.5.0 / 02: 00: 00, M10.5.0 / 03: 00: 00"
X_Label = "40"
ConfigType = "2" />
<UserInterface>
<X_VPN>
<L2TP_LAC LNSAddress = "" HostName = "HGW" Password = "" Enable = "0" WanInterface = "" PCAuthMode = "0" KeepAliveTime = "60"></ L2TP_LAC>
</ X_VPN>
<X_Web Timeout = "5" WebProtectionState = "0" ProtectionPages = "0,0,0,1," RandomString = "" TmpWebProtectionState = "0">
<MailConfig SMTPServer = "" MailSenderId = "" MailSenderpassword = "" />
<UserInfo NumberOfInstances = "2">
<UserInfoInstance InstanceID = "1" Username = "admin" Userpassword = "admin" Email = "" TmpEmail = "" Pwdchanged = "0" RemindChangePwdEnable = "1">
<ObjExtention>
<Userpassword HideBits = "27" />
</ ObjExtention>
</ UserInfoInstance>
<UserInfoInstance InstanceID = "2" Username = "user" Userpassword = "user" Email = "" TmpEmail = "" Pwdchanged = "0" RemindChangePwdEnable = "0" />
</ Userinfo>
<HttpUpg UpdateURL = "update-cis.huaweidevice.com" UpdatePort = "80" CheckNewVer = "" SubURL = "/ cis" />
</ X_Web>
<X_Cli>
<UserInfo NumberOfInstances = "2">
<UserInfoInstance InstanceID = "1" Username = "admin" Userpassword = "admin" Userlevel = "0" />
<UserInfoInstance InstanceID = "2" Username = "user" Userpassword = "user" Userlevel = "1" />
</ Userinfo>
</ X_Cli>
</ Userinterface>
<X_SyslogConfig Enable = "1" Level = "Debug" DisplayLevel = "Error" LogServerEnable = "0" MainServer = "" MainServerPort = "514" MinorServer = "" MinorServerPort = "514" />
<X_FireWall CurrentLevel = "Low">
<FilterMode NumberOfInstances = "5">
<ObjExtention MaxInstanceNum = "5" />
<FilterModeInstance InstanceID = "1"
Level = "Disable"
Revisable = "0"
MACMode = "0"
IPMode = "0"
URLMode = "0"
APPMode = "0"
DoSMode = "0"
ACLMode = "0"
SPIMode = "0"
TotalNumberOfEntries = "0">
<DosAttack SynFlooding = "0"
IcmpFlooding = "0"
ArpAttack = "0" />
<AppFilter NumberOfInstances = "0" />
<IpFilter NumberOfInstances = "0" />
<UrlFilter NumberOfInstances = "0" />
<MacFilter NumberOfInstances = "0" />
<ACL NumberOfInstances = "0" />
</ FilterModeInstance>
<FilterModeInstance InstanceID = "2"
Level = "High"
Revisable = "3"
MACMode = "2"
IPMode = "2"
URLMode = "2"
APPMode = "2"
DoSMode = "1"
ACLMode = "1"
SPIMode = "1"
TotalNumberOfEntries = "0">
<DosAttack SynFlooding = "1"
IcmpFlooding = "1"
ArpAttack = "1" />
<AppFilter NumberOfInstances = "0" />
<IpFilter NumberOfInstances = "0" />
<UrlFilter NumberOfInstances = "0" />
<MacFilter NumberOfInstances = "0" />
<ACL NumberOfInstances = "1">
<ObjExtention MaxInstanceNum = "1" />
<ACLInstance InstanceID = "1"
X_Service = "HTTP"
X_Direction = "LAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
</ ACL>
</ FilterModeInstance>
<FilterModeInstance InstanceID = "3"
Level = "Medium"
Revisable = "3"
MACMode = "2"
IPMode = "2"
URLMode = "1"
APPMode = "1"
DoSMode = "1"
ACLMode = "1"
SPIMode = "1"
TotalNumberOfEntries = "0">
<DosAttack SynFlooding = "1"
IcmpFlooding = "1"
ArpAttack = "1" />
<AppFilter NumberOfInstances = "0" />
<IpFilter NumberOfInstances = "0" />
<UrlFilter NumberOfInstances = "0" />
<MacFilter NumberOfInstances = "0" />
<ACL NumberOfInstances = "1">
<ObjExtention MaxInstanceNum = "1" />
<ACLInstance InstanceID = "1"
X_Service = "HTTP"
X_Direction = "LAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
</ ACL>
</ FilterModeInstance>
<FilterModeInstance InstanceID = "4"
Level = "Low"
Revisable = "3"
MACMode = "1"
IPMode = "1"
URLMode = "1"
APPMode = "1"
DoSMode = "1"
ACLMode = "1"
SPIMode = "1"
TotalNumberOfEntries = "0">
<DosAttack SynFlooding = "0"
IcmpFlooding = "0"
ArpAttack = "0" />
<AppFilter NumberOfInstances = "0" />
<IpFilter NumberOfInstances = "0" />
<UrlFilter NumberOfInstances = "0" />
<MacFilter NumberOfInstances = "0" />
<ACL NumberOfInstances = "7">
<ObjExtention MaxInstanceNum = "7" />
<ACLInstance InstanceID = "1"
X_Service = "HTTP"
X_Direction = "LAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "2"
X_Service = "ICMP"
X_Direction = "LAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "3"
X_Service = "TELNET"
X_Direction = "LAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "4"
X_Service = "HTTP"
X_Direction = "WAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "5"
X_Service = "ICMP"
X_Direction = "WAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "6"
X_Service = "ACS"
X_Direction = "WAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "7"
X_Service = "FTP"
X_Direction = "WAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
</ ACL>
</ FilterModeInstance>
<FilterModeInstance InstanceID = "5"
Level = "Custom"
Revisable = "3"
MACMode = "0"
IPMode = "0"
URLMode = "0"
APPMode = "0"
DoSMode = "0"
ACLMode = "0"
SPIMode = "0"
TotalNumberOfEntries = "0">
<DosAttack SynFlooding = "1"
IcmpFlooding = "1"
ArpAttack = "1" />
<AppFilter NumberOfInstances = "0" />
<IpFilter NumberOfInstances = "0" />
<UrlFilter NumberOfInstances = "0" />
<MacFilter NumberOfInstances = "0" />
<ACL NumberOfInstances = "4">
<ObjExtention MaxInstanceNum = "4" />
<ACLInstance InstanceID = "1"
X_Service = "HTTP"
X_Direction = "LAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "2"
X_Service = "ICMP"
X_Direction = "LAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "3"
X_Service = "ACS"
X_Direction = "WAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
<ACLInstance InstanceID = "4"
X_Service = "TELNET"
X_Direction = "LAN"
X_StartIpAddr = ""
X_EndIpAddr = "" />
</ ACL>
</ FilterModeInstance>
</ Filtermode>
<UrlBlackFilter NumberOfInstances = "0" />
<MacBlackFilter NumberOfInstances = "0" />
<IpBlackFilter NumberOfInstances = "0" />
<AppBlackFilter NumberOfInstances = "0" />
<UrlWhiteFilter NumberOfInstances = "0" />
<MacWhiteFilter NumberOfInstances = "0" />
<IpWhiteFilter NumberOfInstances = "0" />
<AppWhiteFilter NumberOfInstances = "0" />
<AccessControl NumberOfInstances = "9">
<ObjExtention MaxInstanceNum = "9" />
<AccessControlInstance InstanceID = "1"
Service = "HTTP"
Direction = "LAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
<AccessControlInstance InstanceID = "2"
Service = "ICMP"
Direction = "LAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
<AccessControlInstance InstanceID = "3"
Service = "FTP"
Direction = "LAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
<AccessControlInstance InstanceID = "4"
Service = "SAMBA"
Direction = "LAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
<AccessControlInstance InstanceID = "5"
Service = "HTTP"
Direction = "WAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
<AccessControlInstance InstanceID = "6"
Service = "ICMP"
Direction = "WAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
<AccessControlInstance InstanceID = "7"
Service = "FTP"
Direction = "WAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
<AccessControlInstance InstanceID = "8"
Service = "TELNET"
Direction = "LAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
<AccessControlInstance InstanceID = "9"
Service = "SSH"
Direction = "LAN"
StartIpAddr = ""
EndIpAddr = ""
Enable = "0"
Port = "0" />
</ AccessControl>
<DeviceName NumberOfInstances = "0" />
<DosAttackItem NumberOfInstances = "3">
<ObjExtention MaxInstanceNum = "3" />
<DosAttackItemInstance InstanceID = "1"
DosName = "SynFlooding"
DosEnable = "1"
Threshold = "0"
Reserve = "" />
<DosAttackItemInstance InstanceID = "2"
DosName = "IcmpFlooding"
DosEnable = "1"
Threshold = "0"
Reserve = "" />
<DosAttackItemInstance InstanceID = "3"
DosName = "ArpAttack"
DosEnable = "1"
Threshold = "0"
Reserve = "" />
</ DosAttackItem>
</ X_FireWall>
<Layer3Forwarding X_AutoDefaultGatewayEnable = "0" X_DefaultGatewayIPAddress = "" DefaultConnectionService = "">
</ Layer3Forwarding>
<LANDevice NumberOfInstances = "1">
<LANDeviceInstance InstanceID = "1" X_WLANEnable = "1">
<LANHostConfigManagement DHCPServerEnable = "1" MinAddress = "192.168.1.1" MaxAddress = "192.168.1.254" ReservedAddresses = "" DNSServers = "" DomainName = "" IPRouters = "" DHCPLeaseTime = "86400" UseAllocatedWAN ""; = "60" PassthroughMACAddress = "">
<DHCPConditionalServingPool NumberOfInstances = "4">
<ObjExtention MaxInstanceNum = "4" />
<DHCPConditionalServingPoolInstance InstanceID = "1" Enable = "1" MinAddress = "0.0.0.0" MaxAddress = "0.0.0.0" VendorClassID = "STB" X_DeviveDhcpRelay = "0" />
<DHCPConditionalServingPoolInstance InstanceID = "2" Enable = "1" MinAddress = "0.0.0.0" MaxAddress = "0.0.0.0" VendorClassID = "Phone" X_DeviveDhcpRelay = "0" />
<DHCPConditionalServingPoolInstance InstanceID = "3" Enable = "1" MinAddress = "0.0.0.0" MaxAddress = "0.0.0.0" VendorClassID = "Camera" X_DeviveDhcpRelay = "0" />
<DHCPConditionalServingPoolInstance InstanceID = "4" Enable = "1" MinAddress = "0.0.0.0" MaxAddress = "0.0.0.0" VendorClassID = "windows client" X_DeviveDhcpRelay = "0" />
</ DHCPConditionalServingPool>
<IPInterface NumberOfInstances = "1">
<IPInterfaceInstance InstanceID = "1" Enable = "0" IPInterfaceIPAddress = "192.168.1.1" IPInterfaceSubnetMask = "255.255.255.0" IPInterfaceAddressingType = "DHCP" X_RouteProtocolRx = "Off" X_RIPOperation = "Active" />
</ IPInterface>
<IPv6LANHostInfo HostIPv6Address = "fe80 :: 210: 20ff: fe30: 4050" />
<X_DHCPv6 DHCPServerEnable = "1" UseAllocatedWAN = "UseAllocatedSubnet" AssociatedConnection = "InternetGatewayDevice.WANDevice.3. 7200 "DNSServer =" "DomainName =" "/>
<X_SLAAC RouterAdvertisingEnable = "1" UseAllocatedWAN = "UseAllocatedSubnet" AssociatedConnection = "InternetGatewayDevice.WANDevice.3. 7200 "ULAAllocatedMode =" Manual "ULAPrefix =" 9001 :: "ULAPrefixLength =" 64 "ULAPreferredlifetime =" 3600 "ULAValidlifetime =" 7200 "/>
</ LANHostConfigManagement>
<LANEthernetInterfaceConfig NumberOfInstances = "4">
<ObjExtention MaxInstanceNum = "4" />
<LANEthernetInterfaceConfigInstance InstanceID = "1" Enable = "1">
</ LANEthernetInterfaceConfigInstance>
<LANEthernetInterfaceConfigInstance InstanceID = "2" Enable = "1">
</ LANEthernetInterfaceConfigInstance>
<LANEthernetInterfaceConfigInstance InstanceID = "3" Enable = "1">
</ LANEthernetInterfaceConfigInstance>
<LANEthernetInterfaceConfigInstance InstanceID = "4" Enable = "1">
</ LANEthernetInterfaceConfigInstance>
</ LANEthernetInterfaceConfig>
<WLANConfiguration NumberOfInstances = "4">
<WLANConfigurationInstance InstanceID = "1" SSIDAdditionalEnabled = "1" Enable = "1" MaxBitRate = "Auto" Channel = "6" "1" X_WlanStandard = "b / g / n" WEPKeyIndex = "1" WEPEncryptionLevel = "104-bit" BasicEncryptionModes = "WEPEncryption" BasicAuthenticationMode = "SharedAuthentication" WPAEncryptionModes = "TKIPandAESEncryption" WPAAuthenticationMode = "PSKAuthentication" IEEE11iEncryptionModes = "TKIPandAESEncryption" IEEE11iAuthenticationMode = "PSKAuthentication" WMMEnable = "0" X_MixedEncryptionModes = "TKIPandAESEncryption" X_MixedAuthenticationMode = "PSKAuthentication" TransmitPower = "100" X_AssociateDeviceNum = "32" X_WlanMacFilterpolicy = "0" X_WlanStaWakeEnable = "0" X_WlanIsolateControl = "0" X_Wlan11NBWControl = "20" X_WDSEnable = "0" X_WDSEncryptionModes = "None" X_WDSKey = "" X_WDSMode = "Repeater" X_LAZYWDS = "2" X_WlanBand = "0">
<WPS Enable = "0" X_WPSMode = "client-pin" DevicePassword = "15211347" />
<WEPKey NumberOfInstances = "4">
<WEPKeyInstance InstanceID = "1" WEPKey = "1111111111111" />
<WEPKeyInstance InstanceID = "2" WEPKey = "2222222222222" />
<WEPKeyInstance InstanceID = "3" WEPKey = "3333333333333" />
<WEPKeyInstance InstanceID = "4" WEPKey = "4444444444444" />
</ WEPKey>
<PreSharedKey NumberOfInstances = "1">
<PreSharedKeyInstance InstanceID = "1" PreSharedKey = "0123456789" KeyPassphrase = "abcdedfg" />
</ PreSharedKey>
<X_BridgeRestriction NumberOfInstances = "4">
<X_BridgeRestrictionInstance InstanceID = "1" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "2" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "3" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "4" X_WlanBridgeMacAddress = "" />
</ X_BridgeRestriction>
</ WLANConfigurationInstance>
<WLANConfigurationInstance InstanceID = "2" SSIDAddressEnabled = "1" Enable = "0" MaxBitRate = "Auto" Channel = "6" AutoChannelEnable = "1" RegulatoryDomain = "DE" SSID = "SSID-2" BeaconType = "11i" MACAddressControlEnabledid "1" X_WlanStandard = "b / g / n" WEPKeyIndex = "1" WEPEncryptionLevel = "104-bit" BasicEncryptionModes = "WEPEncryption" BasicAuthenticationMode = "SharedAuthentication" WPAEncryptionModes = "TKIPandAESEncryption" WPAAuthenticationMode = "PSKAuthentication" IEEE11iEncryptionModes = "TKIPandAESEncryption" IEEE11iAuthenticationMode = "PSKAuthentication" WMMEnable = "1" X_MixedEncryptionModes = "TKIPandAESEncryption" X_MixedAuthenticationMode = "PSKAuthentication" TransmitPower = "100" X_AssociateDeviceNum = "32" X_WlanMacFilterpolicy = "0" X_WlanStaWakeEnable = "0" X_WlanIsolateControl = "0" X_Wlan11NBWControl = "20" X_WDSEnable = "0" X_WDSEncryptionModes = "None" X_WDSKey = "" X_WDSMode = "Repeater" X_LAZYWDS = "2" X_WlanBand = "0">
<WPS Enable = "0" X_WPSMode = "client-pin" DevicePassword = "15211347" />
<WEPKey NumberOfInstances = "4">
<WEPKeyInstance InstanceID = "1" WEPKey = "1111111111111" />
<WEPKeyInstance InstanceID = "2" WEPKey = "2222222222222" />
<WEPKeyInstance InstanceID = "3" WEPKey = "3333333333333" />
<WEPKeyInstance InstanceID = "4" WEPKey = "4444444444444" />
</ WEPKey>
<PreSharedKey NumberOfInstances = "1">
<PreSharedKeyInstance InstanceID = "1" PreSharedKey = "0123456789" KeyPassphrase = "abcdedfg" />
</ PreSharedKey>
<X_BridgeRestriction NumberOfInstances = "4">
<X_BridgeRestrictionInstance InstanceID = "1" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "2" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "3" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "4" X_WlanBridgeMacAddress = "" />
</ X_BridgeRestriction>
</ WLANConfigurationInstance>
<WLANConfigurationInstance InstanceID = "3" SSIDAddressEnabled = "1" Enable = "0" MaxBitRate = "Auto" Channel = "6" AutoChannelEnable = "1" RegulatoryDomain = "DE" SSID = "SSID-3" BeaconType = "11i" MACAddressControlEnabledid "1" X_WlanStandard = "b / g / n" WEPKeyIndex = "1" WEPEncryptionLevel = "104-bit" BasicEncryptionModes = "WEPEncryption" BasicAuthenticationMode = "SharedAuthentication" WPAEncryptionModes = "TKIPandAESEncryption" WPAAuthenticationMode = "PSKAuthentication" IEEE11iEncryptionModes = "TKIPandAESEncryption" IEEE11iAuthenticationMode = "PSKAuthentication" WMMEnable = "1" X_MixedEncryptionModes = "TKIPandAESEncryption" X_MixedAuthenticationMode = "PSKAuthentication" TransmitPower = "100" X_AssociateDeviceNum = "32" X_WlanMacFilterpolicy = "0" X_WlanStaWakeEnable = "0" X_WlanIsolateControl = "0" X_Wlan11NBWControl = "20" X_WDSEnable = "0" X_WDSEncryptionModes = "None" X_WDSKey = "" X_WDSMode = "Repeater" X_LAZYWDS = "2" X_WlanBand = "0">
<WPS Enable = "0" X_WPSMode = "client-pin" DevicePassword = "15211347" />
<WEPKey NumberOfInstances = "4">
<WEPKeyInstance InstanceID = "1" WEPKey = "1111111111111" />
<WEPKeyInstance InstanceID = "2" WEPKey = "2222222222222" />
<WEPKeyInstance InstanceID = "3" WEPKey = "3333333333333" />
<WEPKeyInstance InstanceID = "4" WEPKey = "4444444444444" />
</ WEPKey>
<PreSharedKey NumberOfInstances = "1">
<PreSharedKeyInstance InstanceID = "1" PreSharedKey = "0123456789" KeyPassphrase = "abcdedfg" />
</ PreSharedKey>
<X_BridgeRestriction NumberOfInstances = "4">
<X_BridgeRestrictionInstance InstanceID = "1" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "2" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "3" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "4" X_WlanBridgeMacAddress = "" />
</ X_BridgeRestriction>
</ WLANConfigurationInstance>
<WLANConfigurationInstance InstanceID = "4" SSIDAddressEnabled = "1" Enable = "0" MaxBitRate = "Auto" Channel = "6" AutoChannelEnable = "1" RegulatoryDomain = "DE" SSID = "SSID-4" BeaconType = "11i" MACAddressControlEnabledid "1" X_WlanStandard = "b / g / n" WEPKeyIndex = "1" WEPEncryptionLevel = "104-bit" BasicEncryptionModes = "WEPEncryption" BasicAuthenticationMode = "SharedAuthentication" WPAEncryptionModes = "TKIPandAESEncryption" WPAAuthenticationMode = "PSKAuthentication" IEEE11iEncryptionModes = "TKIPandAESEncryption" IEEE11iAuthenticationMode = "PSKAuthentication" WMMEnable = "1" X_MixedEncryptionModes = "TKIPandAESEncryption" X_MixedAuthenticationMode = "PSKAuthentication" TransmitPower = "100" X_AssociateDeviceNum = "32" X_WlanMacFilterpolicy = "0" X_WlanStaWakeEnable = "0" X_WlanIsolateControl = "0" X_Wlan11NBWControl = "20" X_WDSEnable = "0" X_WDSEncryptionModes = "None" X_WDSKey = "" X_WDSMode = "Repeater" X_LAZYWDS = "2" X_WlanBand = "0">
<WPS Enable = "0" X_WPSMode = "client-pin" DevicePassword = "15211347" />
<WEPKey NumberOfInstances = "4">
<WEPKeyInstance InstanceID = "1" WEPKey = "1111111111111" />
<WEPKeyInstance InstanceID = "2" WEPKey = "2222222222222" />
<WEPKeyInstance InstanceID = "3" WEPKey = "3333333333333" />
<WEPKeyInstance InstanceID = "4" WEPKey = "4444444444444" />
</ WEPKey>
<PreSharedKey NumberOfInstances = "1">
<PreSharedKeyInstance InstanceID = "1" PreSharedKey = "0123456789" KeyPassphrase = "abcdedfg" />
</ PreSharedKey>
<X_BridgeRestriction NumberOfInstances = "4">
<X_BridgeRestrictionInstance InstanceID = "1" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "2" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "3" X_WlanBridgeMacAddress = "" />
<X_BridgeRestrictionInstance InstanceID = "4" X_WlanBridgeMacAddress = "" />
</ X_BridgeRestriction>
</ WLANConfigurationInstance>
</ WLANConfiguration>
<Hosts>
</ Hosts>
</ LANDeviceInstance>
</ LANDevice>
<WANDevice NumberOfInstances = "1">
<WANDeviceInstance InstanceID = "3">
<WANCommonInterfaceConfig WANAccessType = "Ethernet" Layer1UpstreamMaxBitRate = "100000000" Layer1DownstreamMaxBitRate = "100000000" WANAccessProvider = "" />
<WANDSLInterfaceConfig>
<Stats>
</ Stats>
<ObjExtention HideBits = "30" />
</ WANDSLInterfaceConfig>
<WANEthernetInterfaceConfig Enable = "1" MACAddress = "" MaxBitRate = "Auto" DuplexMode = "Auto">
</ WANEthernetInterfaceConfig>
<X_WANUMTSInterfaceConfig>
<ObjExtention HideBits = "30" />
</ X_WANUMTSInterfaceConfig>
<WANConnectionDevice NumberOfInstances = "1">
<WANConnectionDeviceInstance InstanceID = "1">
<WANEthernetLinkConfig X_VLANIDMark = "- 1" X_802-1pMark = "- 1" />
<X_WANUMTSLinkConfig>
<ObjExtention HideBits = "30" />
</ X_WANUMTSLinkConfig>
<WANDSLLinkConfig>
<ObjExtention HideBits = "30" />
</ WANDSLLinkConfig>
<X_APN NumberOfInstances = "2">
<ObjExtention MaxInstanceNum = "8" />
<X_APNInstance InstanceID = "1" APNName = "auto" APN = "" AuthenticationProtocol = "AUTO" Username = "" Password = "" DialNumber = "" AutoAPN = "0" />
<X_APNInstance InstanceID = "2" APNName = "voip" APN = "voip" AuthenticationProtocol = "AUTO" Username = "" Password = "" DialNumber = "" AutoAPN = "0" />
</ X_APN>
<WANIPConnection NumberOfInstances = "3">
<WANIPConnectionInstance
InstanceID = "1"
Enable = "1"
Reset = "0"
ConnectionType = "IP_Routed"
Name = "internet"
Uptime = "0"
LastConnectionError = ""
AutoDisconnectTime = "1"
IdleDisconnectTime = "0"
WarnDisconnectDelay = "0"
NATEnabled = "1"
AddressingType = "DHCP"
ExternalIPAddress = ""
SubnetMask = ""
DefaultGateway = ""
DNSEnabled = "1"
DNSOverrideAllowed = "1"
DNSServers = ""
MaxMTUSize = "1500"
X_TCP_MSS = "0"
MACAddress = ""
MACAddressOverride = "0"
ConnectionTrigger = "AlwaysOn"
RouteProtocolRx = "Off"
ShapingRate = "- 1"
ShapingBurstSize = ""
PortMappingNumberOfEntries = "10"
X_NetworkPriority = "AUTO"
X_APNName = "auto"
X_APN = ""
X_AuthenticationProtocol = "AUTO"
X_Username = ""
X_Password = ""
X_DialNumber = ""
X_PortTriggerNumberOfEntries = ""
X_LanInterface = ""
X_ServiceList = "VOICE_TR069_INTERNET"
X_DHCPRelay = "0"
X_IPv4Enable = "1"
X_IPv6Enable = "0"
X_VoipEnable = "0"
X_IPv6AddressingType = "DHCP"
X_IPv6PrefixList = ""
X_IPv6DefaultGateway = ""
X_IPv6DNSEnabled = "1"
X_IPv6DNSOverrideAllowed = ""
X_IPv6DNSServers = ""
X_IPv6Address = ""
X_IPv6PrefixLength = ""
X_TunnelType = ""
X_TunnelEndpoint = ""
X_AutoAPN = "0"
X_RoamingDisable = "1">
<PortMapping NumberOfInstances = "0" />
</ WANIPConnectionInstance>
<WANIPConnectionInstance
InstanceID = "2"
Enable = "1"
Reset = "0"
ConnectionType = "IP_Routed"
Name = "voice"
Uptime = "0"
LastConnectionError = ""
AutoDisconnectTime = "1"
IdleDisconnectTime = "0"
WarnDisconnectDelay = "0"
NATEnabled = "0"
AddressingType = "DHCP"
ExternalIPAddress = ""
SubnetMask = ""
DefaultGateway = ""
DNSEnabled = "1"
DNSOverrideAllowed = "1"
DNSServers = ""
MaxMTUSize = "1500"
X_TCP_MSS = "0"
MACAddress = ""
MACAddressOverride = "0"
ConnectionTrigger = "AlwaysOn"
RouteProtocolRx = "Off"
ShapingRate = "- 1"
ShapingBurstSize = ""
PortMappingNumberOfEntries = "0"
X_NetworkPriority = "AUTO"
X_APNName = "voip"
X_APN = "voip"
X_AuthenticationProtocol = "AUTO"
X_Username = ""
X_Password = ""
X_DialNumber = ""
X_PortTriggerNumberOfEntries = ""
X_LanInterface = ""
X_ServiceList = "VOICE"
X_DHCPRelay = "0"
X_IPv4Enable = "1"
X_IPv6Enable = "0"
X_VoipEnable = "0"
X_IPv6AddressingType = "DHCP"
X_IPv6PrefixList = ""
X_IPv6DefaultGateway = ""
X_IPv6DNSEnabled = "1"
X_IPv6DNSOverrideAllowed = ""
X_IPv6DNSServers = ""
X_IPv6Address = ""
X_IPv6PrefixLength = ""
X_TunnelType = ""
X_TunnelEndpoint = ""
X_AutoAPN = "0"
X_RoamingDisable = "1">
<PortMapping NumberOfInstances = "0" />
</ WANIPConnectionInstance>
<WANIPConnectionInstance
InstanceID = "3"
Enable = "0"
Reset = "0"
ConnectionType = "IP_Routed"
Name = "tr069"
Uptime = "0"
LastConnectionError = ""
AutoDisconnectTime = "1"
IdleDisconnectTime = "0"
WarnDisconnectDelay = "0"
NATEnabled = "0"
AddressingType = "DHCP"
ExternalIPAddress = ""
SubnetMask = ""
DefaultGateway = ""
DNSEnabled = "1"
DNSOverrideAllowed = "1"
DNSServers = ""
MaxMTUSize = "1500"
X_TCP_MSS = "0"
MACAddress = ""
MACAddressOverride = "0"
ConnectionTrigger = "AlwaysOn"
RouteProtocolRx = "Off"
ShapingRate = "- 1"
ShapingBurstSize = ""
PortMappingNumberOfEntries = "0"
X_NetworkPriority = "AUTO"
X_APNName = "tr069"
X_APN = "apn-lte"
X_AuthenticationProtocol = "AUTO"
X_Username = ""
X_Password = ""
X_DialNumber = ""
X_PortTriggerNumberOfEntries = ""
X_LanInterface = ""
X_ServiceList = "TR069"
X_DHCPRelay = "0"
X_IPv4Enable = "1"
X_IPv6Enable = "0"
X_VoipEnable = "0"
X_IPv6AddressingType = "DHCP"
X_IPv6PrefixList = ""
X_IPv6DefaultGateway = ""
X_IPv6DNSEnabled = "1"
X_IPv6DNSOverrideAllowed = ""
X_IPv6DNSServers = ""
X_IPv6Address = ""
X_IPv6PrefixLength = ""
X_TunnelType = ""
X_TunnelEndpoint = ""
X_AutoAPN = "0"
X_RoamingDisable = "1">
<PortMapping NumberOfInstances = "0" />
</ WANIPConnectionInstance>
</ WANIPConnection>
</ WANConnectionDeviceInstance>
</ WANConnectionDevice>
</ WANDeviceInstance>
</ WANDevice>
<Layer2Bridging>
<Bridge NumberOfInstances = "1">
<BridgeInstance InstanceID = "1" BridgeName = "br0">
</ BridgeInstance>
</ Bridge>
</ Layer2Bridging>
<Services>
<StorageService NumberOfInstances = "1">
<StorageServiceInstance InstanceID = "1" Enable = "1">
<NetInfo HostName = "" DomainName = "ATP.ip" />
</ StorageServiceInstance>
</ StorageService>
<X_ALGAbility H323Enable = "1" SIPEnable = "0" SIPPort = "5060" SIPWanPath = "" RTSPEnable = "1" L2TPEnable = "1" IPSECEnable = "1" PPTPEnable = "1" />
<X_IPTV IGMPProxyEnable = "0" IGMPSnoopingEnable = "1" GroupNumber = "32" WanList = "" />
<X_WANBackup Mode = "Disable" />
<X_MCAST McastEnable = "0" McastAddr = "239.10.0.100" McastPort = "37123" />
<X_MWBAND Mode = "0" TotalTerminalNumber = "4" STBRestrictEnable = "0" STBNumber = "1" CameraRestrictEnable = "0" CameraNumber = "1" ComputerRestrictEnable = "0" ComputerNumber = "1" PhoneRestrictEnable = "0" PhoneNumber = "1 "/>
<X_UPnP Enable = "1" TR064ConfigPwd = "admin" />
<VoiceService NumberOfInstances = "1">
<VoiceServiceInstance InstanceID = "1" VoiceProfileNumberOfEntries = "0" X_PstnNumber = "" X_UmtsEnable = "1" X_UmtsNumber = "">
<Capabilities MaxProfileCount = "15" MaxLineCount = "15" MaxSessionsPerLine = "3" MaxSessionCount = "2" SignalingProtocols = SIP / 2.0 "Regions =" ​​de "RTCP =" 1 "SRTP =" 0 "RTPRedundancy =" 0 "DSCPCoupled = "0" EthernetTaggingCoupled = "0" PSTNSoftSwitchover = "1" FaxT38 = "1" FaxPassThrough = "1" ModemPassThrough = "1" ToneGeneration = "0" RingGeneration = "0" DigitMap = "1" NumberingPlan = "1" ButtonMap = "1" VoicePortTests = "0">
<SIP EventSubscription = "1" Role = "UserAgent" Extensions = "INVITE, ACK, OPTIONS, CANCEL, BYE, UPDATE, PRACK, INFO, SUBSCRIBE, NOTIFY, REFER" Transports = "UDP" URISchemes = "" ResponseMap = "0" />
</ Capabilities>
<X_CommonConfig Region = "CN" DigitMap = "[X * # ABCD] .T" Enable SharpKey = "1" HotLineEnable = "0" HotLineIntervalTime = "7" HotLineNumber = "" OffHookTime = "250" OnHookTime = "250" MinHookFlash = " 80 "MaxHookFlash =" 250 "RegisterExpires =" 900 "X_PrackSupport =" 0 "X_UrgencyUsePriority =" 1 "X_SessionExpires =" 3600 "X_MinSessionExpires =" 90 "X_HoldMethod =" 0 "X_InterName =" "" Cit- ral "X_HoldMethod =" 0 "X_InterName" ">
<EventSubscribe NumberOfInstances = "1">
<EventSubscribeInstance InstanceID = "1" Event = "MWI" ExpireTime = "300" />
</ EventSubscribe>
<OptionTime OptionsType = "0" IntervalTime = "30" />
<RTP LocalPortMin = "50000" LocalPortMax = "50020" JitterBufferLength = "20" PackLostCompensate = "1" JitterBufferType = "1">
<RTCP TxRepeatInterval = "3000" />
</ Rtp>
<NumberingPlan InterDigitTimerStd = "5000" PrefixInfoMaxEntries = "16" PrefixInfoNumberOfEntries = "0" StartDigitTimerStd = "10000" UnResponseInterval = "60000" HowlToneTime = "60000" BusyToneTime = "40000">
<EmergencyInfo NumberOfInstances = "5">
<EmergencyInfoInstance InstanceID = "1" PrefixRange = "110" Description = "" />
<EmergencyInfoInstance InstanceID = "2" PrefixRange = "112" Description = "" />
<EmergencyInfoInstance InstanceID = "3" PrefixRange = "119" Description = "" />
<EmergencyInfoInstance InstanceID = "4" PrefixRange = "120" Description = "" />
<EmergencyInfoInstance InstanceID = "5" PrefixRange = "122" Description = "" />
</ EmergencyInfo>
</ X_CommonConfig>
<VoiceProfile NumberOfInstances = "1">
<VoiceProfileInstance InstanceID = "1" Enable = "Enabled" NumberOfLines = "0" Name = "Profile1" DTMFMethod = "InBand" STUNServer = "" X_STUNServerPort = "3478">
<Sip>
</ Sip>
<Rtp>
</ Rtp>
<NumberingPlan X_InterDigitTimerLong = "10000" X_EmergencyRoute = "0" X_EmergencyRou
teAccount = "">
</ NumberingPlan>
<Buttonmap>
</ Buttonmap>
</ VoiceProfileInstance>
</ VoiceProfile>
<PhyInterface NumberOfInstances = "1">
<PhyInterfaceInstance InstanceID = "1" PhyPort = "1" InterfaceID = "1" X_InCallNumber = "** 1" X_IncomingLineList = "all" "X_CFNRDestPortId =" - 1 "/>
</ PhyInterface>
<X_Fixed AreaCode = "" BusNumber = "** 21" IncomingLineList = "all" OutgoingLineList = "auto">
<Line NumberOfInstances = "10">
<LineInstance InstanceID = "1" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "2" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "3" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "4" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "5" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "6" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "7" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "8" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "9" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
<LineInstance InstanceID = "10" ISDNNumber = "" BusyOnBusy = "0" CLIPEnable = "1" />
</ Line>
</ X_Fixed>
<X_Dect Enable = "1" Pin = "0000" NumberOfInstances = "5">
<DectInstance InstanceID = "1" IncomingLineList = "all" OutgoingLineList = "auto" Name = "" Number = "" />
<DectInstance InstanceID = "2" IncomingLineList = "all" OutgoingLineList = "auto" Name = "" Number = "" />
<DectInstance InstanceID = "3" IncomingLineList = "all" OutgoingLineList = "auto" Name = "" Number = "" />
<DectInstance InstanceID = "4" IncomingLineList = "all" OutgoingLineList = "auto" Name = "" Number = "" />
<DectInstance InstanceID = "5" IncomingLineList = "all" OutgoingLineList = "auto" Name = "" Number = "" />
</ X_Dect>
<X_SipServer ServerPort = "6050">
</ X_SipServer>
</ VoiceServiceInstance>
</ VoiceService>
<X_DDNSConfiguration NumberOfInstances = "1">
<ObjExtention MaxInstanceNum = "1" />
<X_DDNSConfigurationInstance
InstanceID = "1"
Enable = "0"
Provider = "DynDNS.org"
Username = ""
Password = ""
ServicePort = "80"
Protocol = "dyndns"
Server = "members.dyndns.org"
DomainName = ""
HostName = ""
WanPath = "InternetGatewayDevice.WANDevice.3.WANConnectionDevice.1.WANIPConnection.1" />
</ X_DDNSConfiguration>
</ Services>
<X_notify PushEnable = "1" PushHostIPAddress = "" SMS_Number = "" SMS_Forward_From_Num = "" SMS_Forward_Enable = "0" TimeControl = "168">
<Event NumberOfInstances = "3">
<EventInstance InstanceID = "1" EventType = "0" PeriodEnable = "1" PushEnable = "1" SMSEnable = "0" EventTimeControl = "168" />
<EventInstance InstanceID = "2" EventType = "1" PeriodEnable = "0" PushEnable = "0" SMSEnable = "0" EventTimeControl = "168" />
<EventInstance InstanceID = "3" EventType = "2" PeriodEnable = "0" PushEnable = "0" SMSEnable = "0" EventTimeControl = "168" />
</ Event>
</ X_notify>
</ InternetGatewayDevice>
</ InternetGatewayDeviceConfig>

Also, from this archive you can find out other information, such as iptables tables and current connections, the number of interfaces, the result of scanning Wi-Fi points when turned on, the noise level, the signal level of all APs. The current level of TD, which is running on the router and many other useful and not very information.

Also, after analyzing these files, we managed to find out that the battery charge level is polled every 10 seconds. Based on the current voltage, the system decides how much current to charge the battery. When a certain threshold is reached, the system switches to a droplet battery charge. The maximum voltage at the output of the battery when charging 4.2 V. Working 3.75 V, that is, under load.

Also charging is focused on the temperature of the batteries. This device uses Ni-MH, which, when the maximum charge is reached, ceases to accept the charge entering them and begins to heat up. On this principle, and based tracking the end of the charge. As soon as the temperature exceeds the permissible level, charging stops.

This file stores the scan results of neighboring Wi-Fi APs, as an example.

Wlctl_scanresults.txt content

SSID: "ZyXEL_KEENETIC_994726"
Mode: Managed RSSI: -93 dBm SNR: 0 dB noise: -82 dBm Flags: FromBcn RSSI on-channel Channel: 1l
BSSID: CC: 5D: 4E: 99: 47: 26 Capability: ESS WEP ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 9 (b) 18 (b) 36 (b) 54 (b) 6 (b) 12 (b) 24 (b) 48 ( b)]
WPA:
multicast cipher: TKIP
unicast ciphers (2): TKIP AES-CCMP
AKM Suites (1): WPA-PSK
No WPA Capabilities advertised
HT Capable:
Chanspec: 2.4GHz channel 3 40MHz (0x1803)
Primary channel: 1
HT Capabilities: 40Mhz SGI20 SGI40
Supported MCS: [0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 32]
WPS: V1.0 Configured

SSID: "Wi-Fi-Router_8234"
Mode: Managed RSSI: -90 dBm SNR: 0 dB noise: -82 dBm Flags: FromBcn RSSI on-channel Channel: 1l
BSSID: E8: CD: 2D: 64: 80: BC Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 9 18 36 54 6 12 24 48]
RSN:
multicast cipher: TKIP
unicast ciphers (2): TKIP AES-CCMP
AKM Suites (1): WPA-PSK
Capabilities (0x0000): No Pre-Auth, Pairwise, 1 PTK Replay Ctr1 GTK Replay Ctr
HT Capable:
Chanspec: 2.4GHz channel 3 40MHz (0x1803)
Primary channel: 1
HT Capabilities: 40Mhz
Supported MCS: [0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 32]
WPS: V2.0 Configured

SSID: "dlink-2-131"
Mode: Managed RSSI: -55 dBm SNR: 0 dB noise: -92 dBm Flags: RSSI on-channel Channel: 6
BSSID: 00: 1C: F0: AF: 52: 13 Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 6 9 11 (b) 12 18 24 36 48 54]
WPA:
multicast cipher: TKIP
unicast ciphers (1): TKIP
AKM Suites (1): WPA-PSK
No WPA Capabilities advertised
WPS: V1.0
SSID: "mgts143"
Mode: Managed RSSI: -65 dBm SNR: 0 dB noise: -92 dBm Channel: 6
BSSID: 70: 54: F5: D8: B2: 56 Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 6 9 12 18 24 36 48 54]
WPA:
multicast cipher: TKIP
unicast ciphers (2): AES-CCMP TKIP
AKM Suites (1): WPA-PSK
No WPA Capabilities advertised
RSN:
multicast cipher: TKIP
unicast ciphers (2): AES-CCMP TKIP
AKM Suites (1): WPA-PSK
Capabilities (0x0000): No Pre-Auth, Pairwise, 1 PTK Replay Ctr1 GTK Replay Ctr
HT Capable:
Chanspec: 2.4GHz channel 6 20MHz (0x1006)
Primary channel: 6
HT Capabilities: SGI40
Supported MCS: [0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15]

SSID: "mgts131"
Mode: Managed RSSI: -56 dBm SNR: 0 dB noise: -92 dBm Flags: RSSI on-channel Channel: 6
BSSID: 28: 31: 52: 29: E7: 2F Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 6 9 12 18 24 36 48 54]
WPA:
multicast cipher: TKIP
unicast ciphers (1): TKIP
AKM Suites (1): WPA-PSK
No WPA Capabilities advertised

SSID: "mgts139"
Mode: Managed RSSI: -58 dBm SNR: 0 dB noise: -92 dBm Flags: RSSI on-channel Channel: 6
BSSID: 70: 54: F5: CC: BB: 25 Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 6 9 12 18 24 36 48 54]
WPA:
multicast cipher: TKIP
unicast ciphers (1): TKIP
AKM Suites (1): WPA-PSK
No WPA Capabilities advertised

SSID: "ANARCHY"
Mode: Managed RSSI: -27 dBm SNR: 0 dB noise: -81 dBm Flags: RSSI on-channel Channel: 9u
BSSID: EC: 43: F6: 04: B6: E0 Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 9 (b) 18 (b) 36 (b) 54 (b) 6 (b) 12 (b) 24 (b) 48 ( b)]
RSN:
multicast cipher: AES-CCMP
unicast ciphers (1): AES-CCMP
AKM Suites (1): WPA-PSK
Capabilities (0x0000): No Pre-Auth, Pairwise, 1 PTK Replay Ctr1 GTK Replay Ctr
HT Capable:
Chanspec: 2.4GHz channel 7 40MHz (0x1907)
Primary channel: 9
HT Capabilities: 40Mhz SGI20 SGI40
Supported MCS: [0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 32]

SSID: "Ilya"
Mode: Managed RSSI: -97 dBm SNR: 0 dB noise: -92 dBm Flags: FromBcn RSSI on-channel Channel: 6
BSSID: 00: 1F: C6: 82: 1C: 20 Capability: ESS WEP ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 18 24 36 54 6 9 12 48]
WPA:
multicast cipher: TKIP
unicast ciphers (1): TKIP
AKM Suites (1): WPA-PSK
Capabilities (0x0000): Pairwise, 1 PTK Replay Ctr

SSID: "EVGENY"
Mode: Managed RSSI: -80 dBm SNR: 0 dB noise: -81 dBm Flags: RSSI on-channel Channel: 11
BSSID: 70: 54: F5: CC: 1E: A9 Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 6 9 12 18 24 36 48 54]
RSN:
multicast cipher: AES-CCMP
unicast ciphers (1): AES-CCMP
AKM Suites (1): WPA-PSK
Capabilities (0x0000): No Pre-Auth, Pairwise, 1 PTK Replay Ctr1 GTK Replay Ctr
HT Capable:
Chanspec: 2.4GHz channel 11 20MHz (0x100b)
Primary channel: 11
HT Capabilities: SGI40
Supported MCS: [0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15]

SSID: "mgts127"
Mode: Managed RSSI: -74 dBm SNR: 0 dB noise: -81 dBm Flags: RSSI on-channel Channel: 11
BSSID: 70: 54: F5: D1: 97: B3 Capability: ESS WEP ShortPre ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 11 (b) 6 9 12 18 24 36 48 54]
WPA:
multicast cipher: TKIP
unicast ciphers (1): TKIP
AKM Suites (1): WPA-PSK
No WPA Capabilities advertised

As well as the file wlctl_status.txt, the current TD on the device

Wlctl_status.txt content

SSID: "SSID_NAME"
Mode: Managed RSSI: 0 dBm SNR: 0 dB noise: -88 dBm Channel: 1
BSSID: C4: 05: 28: C9: EC: F1 Capability: ESS ShortSlot
Supported Rates: [1 (b) 2 (b) 5.5 (b) 6 9 11 (b) 12 18 24 36 48 54]
HT Capable:
Chanspec: 2.4GHz channel 1 20MHz (0x1001)
Primary channel: 1
HT Capabilities:
Supported MCS: [0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15]

Thus, based on the information received, some useful conclusions can be drawn, I think. At least you can get some information. Also, it is not possible to obtain additional information about the signal level from these files. But, perhaps, if you get access to SSH, then you can give the AT command to the modem directly.

Post has been editedSaymer - 14.05.14, 11:14

[Serjerry]

Hello.
Please tell me the exact name of the connector for connecting an external antenna for the Huawei E5172 LTE Black router (E5172As-22), and which antennas you can advise (so that without adapters, immediately screw into this router - and work: happy :) to enhance the signal (preferably external ).

Attached images

Post has been editedSerjerry - 16.05.14, 11:44

[Saymer]

The connector is called there SMA female, SMA mother, SMA socket. Not to be confused with the RP-SMA connector, which is used on home Wi-Fi routers.

It also follows when choosing an antenna, and the cable to it to be careful. Because with the SMA connector on the 5d-fb cable5d-fb cableThere will be a problem with its connection. I encountered this problem myself, and found two ways to solve it:

1. The first solution, which has already been done, is to install an adapter.such
The disadvantage of this solution is that first an adapter is screwed to the connector on the modem's board, and a thick and rigid cable is screwed to this adapter. When screwing the adapter increases the lever, and you can easily break the connector from the board. This will not be a warranty case, and most likely the connector will already be quite problematic to restore. That is, I thought I understood that it would be better for me to apply the second option.

2. Solution two to use cable assemblysuch
The disadvantage of this solution is that additional signal loss of 0.1 dB is made at the cable connector, plus on the cable itself and 0.1 dB at the other connector.
But, I thought, I realized that if it’s critical to treat a signal loss of 2-3 DB there, then you need to make a direct connection to the connectors of the modem board, and put the board next to the antenna. As suggested above in this topic.

There are several advantages of this solution. Firstly, the cable is quite flexible and thin, which makes it possible to crawl into the hole with a key without any problems and tighten the nut of the connector. Hands do not get there in any way.
The second is that the cable is flexible, the connector will not suffer so much from a mechanical load. That is, again, plus. Thus, this is the most optimal solution if you do not plan to violate the integrity of the body and lose the warranty.

Thus, it is necessary that the antenna be either directly with the RG-58 cable, or at the end of the antenna cable there is a piece of cable 20-30 cm of the RG-58 cable. With a thick cable, connecting an external antenna without additional adapters will most likely be impossible.

Regarding the antenna, judging by the request, some kind of Chinese. As I understand it, they already come with such thin cables in combination. Either of ours, but negotiate when ordering cable.

Post has been editedSaymer - 16.05.14, 19:29

[V.Bogatov]

Good day.
I bought a summer cottage with an E5172 router. Half an hour after the start of work, it ceases to distribute the Internet that via Wi-Fi, that via LAN (Simka 4G from Megaphone). Home in the zone of uncertain reception 4G. 3G from MTS did not fall off. I assume that the router does NOT automatically switch from 4G to 3G. First I want to reflash the router. I downloaded the firmware from the Huawei website (RAR archive). Never flashing routers. Tell me, pliz, the procedure.

[mxboy]

So, the regular case of the router is broken, the board is in a hermobox, the hermobox on the mast is directly under the antenna (mast ~ 10 m. High).
The distance to the BS is already 12 km (lte, megaphone). The BS itself is in a lowland (!) On a very low tower, about 25 m. In height. The track link - the field and forests.

Such a hellish signal is almost on the verge


And this is the result, which is quite acceptable for places with a complete lack of 3G and a lifelong skyline.



I note that neither E392 nor E3276 registred on the network and did not want to connect to it categorically with any antennas. The BS clearly did not hear them, although they saw the signal from the BS quite well.

Post has been editedmxboy - 20.05.14, 00:22

[Tcykacy]

V.Bogatov,What firmware did you download? I did not even climb the huawei sites, I did not find the firmware, except for the source code! Regarding the fact that the router incorrectly switches between modes, try to set hard, only 3G or only 4G and see what changes, it will probably be easier to leave it in one mode and get a stable link with a stable speed.


Post has been editedTcykacy - 20.05.14, 03:24

[V.Bogatov]

Tcykacy @ 05/20/2014, 04:23

I did not even climb the huawei sites, I did not find the firmware, except for the source code!

Right, but I didn’t pay attention (Source Code). Sadly

Tcykacy @ 05/20/2014, 04:23

Regarding the fact that the router incorrectly switches between modes, try to set hard, only 3G or only 4G and see what changes, it will probably be easier to leave it in one mode and get a stable link with a stable speed.

Have to. For 3G, I wouldn't buy this kit, LTE is necessary. Before buying, I especially climbed onto the roof, the phone there showed LTE, on the ground only H +.
In the settings, is it possible to specify hard 3G or LTE? Which section? Log in, as I understand it, through the web interface?

[Tcykacy]

V.Bogatov,Yes, in the settings you can specify what to use, 3G or 4G, and it is also possible to specify which antenna to use external or internal.
Come on in 192.168.1.1
The default username and password is admin.
the Internet >Network connection.
Auto - The device independently selects the mode of operation in order.
Preferences: 4G, 3G and 2G.
4G The device connects to a 4G network only.
3G The device connects only to the 3G network.
2G The device connects to a 2G network only.
=============================
Antenna tuning
System >Hantenna settings.

If LTE will not take - buy an antenna, for example such.Antenna.



Post has been editedTcykacy - 20.05.14, 08:52

[V.Bogatov]

Tcykacy @ 05/20/2014, 09:48

If LTE will not take - buy an antenna, for example such. Antenna.

So I bought this onekitHe hoped to raise the speed, but in the end he practically threw out the money.
In addition to the LTE Megaphone, no one else has this place.
Nevertheless, thanks for the detailed answer, the second time "+" put the site does not.

Post has been editedV.Bogatov - 20.05.14, 09:47