[X]Assistant

[citrixserver]

Discussion: Huawei E5172

A photo:

Description:

4G / Wi-Fi-access point (router)
Wi-Fi standard: 802.11n
3G support
LTE support

Specifications:

General characteristics
Type 4G / Wi-Fi access point (router)
802.11n wireless standard
Built-in 3G support
Built-in LTE support
Reception / Transmission
Information Security WEP, WPA, WPA2
Router
The router is
Firewall (FireWall) is
NAT is
Monitoring and Configuring
Web interface is
VoIP
Number of FXS 1 ports
Additionally
Autonomous work is
Additional information connector for external antenna; RJ-11 port for connecting an analog telephone

Reviews:

Useful

Photos of the entrails
A set of firmware
Full specification of the router
All available information regarding access to Huawei E5172 via SSH
Instructions for changing IMEI and TTL

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links, or through QMS.

Post has been editedstp101 - 08.11.18, 00:05

Reason for editing: Instructions for changing IMEI and TTL

[rash_b]

Firmware Huawei E5172 As-22 C209SP100 Megafon Russia

[geezar]

Friends,

I use HUAWEI E5172 As-22 (officially branded in M-Video) router with Megafon operator in the Moscow region for the Internet and mainly for IP telephony (built-in SIP client) - a DECT phone is connected to it

So IP telephony is unstable - registration is often lost (different providers), although the Internet works well on it

Respectively,

1) Does it make sense to install the firmware from Megaphone, or is it severely curtailed and more serious problems may arise with IP telephony?

2) will there be a problem later to recover on the original HUAWEI firmware

3) Can it be better to just watch the latest original HUAWEI firmware and live on it? and what is now pliz last?


Thank!!




Post has been editedgeezar - 21.03.14, 18:17

[stupport]

Good day to all!
We bought this miracle, with a 3G sim card it works fine.
When I insert an LTE SIM card from a megaphone, it does not find the network.
Writes a connection error, error code 3254.

Firmware from here (http://3ginfo.ru/downloads938.html)rocked, but it is not set.
Through the browser, downloading the firmware file ends with an error.
A utility that in the screenshots of the link pretends that it works, but in fact does not flash anything.
What are the suggestions of colleagues?

[geezar]

Maybe the problem is that the "4G / LTE" service is not connected to the megaphone and therefore does not work .. Try it - it happened on several devices ..

And check this sim card on another device ...

And don’t put a better megaphone firmware better - Huawei’s support said it’s cut down a lot - For example, as Megaphone says IP telephony is not supported on it

Post has been editedgeezar - 28.03.14, 19:13

[citrixserver]

The Megovon R100-1 Megovsky router has weaned from greed, thanks to the authors of the topic:
"Here you can get device unlock codes for FREE"
Now you can use the whole range of providers - Pchelain, Megaphone, Yota, MTS and Tele2.
ps
To request a code (NEW ALGO CODE) the router should be called -Megafon R100-1
Also be sure to get the code you needemail address on google mail
And lastly: to enter the unlock code, I needed a SIM card of another OPPOS. It is necessary to make the router system "curse."
At hand was SIMKA MTS.
"The system cursed," and asked for the code, warning that there were only 10 attempts. I fed it earlierNEW ALGO CODE
Check unlock can be carried out by the programDC-Unlocker. Take it for free on the same site developer.
To work with all PPSPs in your area, complete the appropriate APN profiles.
Then to connect, simply select the desired one after installing the appropriate SIM.

Post has been editedcitrixserver - 30.03.14, 20:22

[citrixserver]

By the way who needs HELP on the router system.
Built-in help from the router Megafon R100-1.

Attached files

help.pdf(431.66 KB)

[Geo-]

Tell me please, noob, will this router work with any LTE operator?
Now I have a megaphone LTE modem with Wi-Fi on their SIM card, I want to change this for the sake of connecting the phone. Will I need to customize that thread, or will I just stick my current SIM card and I will have LTE?
Will the phone also work simply by sticking it into the router and setting the parameters of the SIP telephony provider?

[Geo-]

Thank you for not answering: rofl:
I bought this router, I set everything up, it works fine.
If there is no VoIP telephony, then when you connect a landline phone to the router, you can call as from a mobile phone. When you call, the SIM card number is used and, accordingly, all of its properties and rates, as if you inserted a SIM card into a mobile phone.
If there is VoIP, then VoIP is used first, if it is not available, then CS.
This is all great and convenient, but how to turn off CS ?? If there is no VoIP then so that it does not ring at all ...

[mxboy]

Mega R100-1, insider: P




What power does he have on LTE?
I can’t find a datasheet for at least some of its modifications: help:

Post has been editedmxboy - 20.04.14, 23:15

[BoskSpb]

Geezar @ 03/28/2014, 8:07 PM

And don’t put a better megaphone firmware better - Huawei’s support said it’s cut down a lot - For example, as Megaphone says IP telephony is not supported

But is it possible to put this firmware somewhere? To replace it with a megaphone

[BoskSpb]

And does anyone have a firmware from huawei?

[citrixserver]

mxboy @ 04.21.2014, 00:10

I can not find a datasheet for at least some modification

Is this something?
Yes, and I had a question after viewing your photo. Did I understand correctly that to add a 2nd external antenna through the SMA connector on the chipset (top right), there is already a “free” and not yet occupied antenna connector?

Attached files

E5172As-22 V200R001C209SP100 Release Notes.pdf(263.89 KB)

[mxboy]

Thanks for the pdfchik, then what you need.
These are not free, they are technological connectors for control measurements on the production conveyor. For them, do not find a mate.
You can connect a second external antenna only through UFL type connectors on the RF module (which is with a bar code), into which standard antennas are connected.
By default, the horizontal is permanently connected, and the vertical is switched by a software key-mikruha that is next to the SMA-connector.


Post has been editedmxboy - 01.05.14, 22:12

[hotcat]

I soldered a cable on the back of the board .... I was obscured without a sma plug.
External antenna taxis. : yes2:

[citrixserver]

hotcat @ 05/03/2014, 12:46

External antenna taxis.

If you do not mind, then pliz photo in the studio.

[email protected], 23:06

Thanks for the pdfchik, then what you need.

This was good inside the firmware archive for the Megovskiy router. What is interesting Huawei not in all archives with the firmware puts a similar description. Why is it so ... Kh.Z. I myself am still looking for a similar description on the Huawei B880-75. : rolleyes:

[email protected], 23:06

By default, the horizontal is permanently connected, and the vertical is switched by a software key-mikruha that is next to the SMA-connector.

Do I interpret you correctly:
- When there is no external antenna on the router, the router uses MIMO if it is possible with 2 internal antennas ("vertical" and "horizontal")
- When there is an external antenna on the router (only one external one), then MIMO is not possible in principle.
- For a full-fledged MIMO with a set of external antennas, it makes sense (or at least the opportunity) to "modify" the router to the 2nd external antenna, because the "basic chipset of the router itself is not against it, but only FOR!"

Post has been editedcitrixserver - 03.05.14, 15:02

[mxboy]

All right Apparently religion did not allow the Chinese to make 2 SMA plugs and not one.

[chuspp]

And no one ran across how to get access to the root? Very much it is not convenient to tune the chopsticks, I thought I could dig some tool in the console.

[Saymer]

[email protected], 13:37

it is not convenient to tune the chopsticks

It is possible to find out the signal level in a regular way, for this you need to go to WEB 192.168.1.1, and there:
System>Diagnostics>Check the status of wireless. network

[mxboy]

[email protected], 13:37

And no one ran across how to get access to the root?

And what, it is possible to go to the console? ) There is no telnet in it, sort of.

[chuspp]

Port scanner issued 22 open port. And from the strange 8081)