> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo S930 - Firmware



Rep: (620)
Lenovo S930 - Firmware
PictureLenovo Vibe X Max
Description | Discussion пїЅ | Purchase пїЅ | Firmware пїЅ

Important information!
The phone has a weak power connector, the firmware is at your own risk!


Drivers and Utilities
Firmware
Instructions
Video instructions for installing drivers for SP Flash Tool
How to flash a modified recovery through the program Mobileuncle MTK Tools
Instructions for insertion through the TWRP recovery
Instructions for creating a backup of the dev / nvram section via MTK Droid Tools
Firmware with data storage
Instructions for insertion through the program SP Flash Tool v3
Instructions on firmware through the program SP Flash Toolv5
VNIMANIE- only use a new utility SP_Flash_Tool_v5.1352.01
Brief instructions for the use of new utility SP_Flash_Tool_v5.1352.01
1- Run - rugnetsya is not selected Skatter- click OK
2 Change the boot mode PO- default is DOWLOAD
Attached Image

On the Firmware Upgrade
Attached Image
3 Select the Scatter
Attached Image
Attached Image

4 Press the start button
Attached Image

Pass the test images, then plug off the body to the PC to ensure click the red button next to the memory card slot.
5- Waiting closure
Attached Image

Enter the area code is not necessary !!! After loading the device to reset the code #### 7777 # of the dialer.

Installation instructions of a custom rekaveri and obtaining Ruth rights
SEWING ONLY flashers in the archive!
1 transferred to the indoor and Flash memory filesubbinst-signed.zip
2. Turn off the phone.
3. Go to the flasher program.
4. Select the file skater.
5. In the menu select proshivalschikaDownloadpress. Respond to requests "OK".
6. Connect a phone. I went installation.
7. When there is a green ring (so everything went well).
8. Close the program. Disconnect the phone.
Not including the phone go to rekaveri (at the same time we press the volume keys "+" and "-" and inclusion).
Go not a big ripples, fear not as it should be.
In rekaveri go to install zip from sdcard choosesubbinst-signed.zip
We are stitching.
That's it, right Ruth received (superuser update from Market are not set).
A warning:If you log in rekaveri error appears
It happens. When not properly clamped volume buttons.
Hold tight, "+" and "-" and then press the power button.
Once the phone vibrate, release the button.

Little useful trick

Instructions for obtaining the root-rights with a patch for TWRP-rekaveri
Preparation of Root and Installation kastomov rekaveri (chewed interpretation)
The radio module firmware
EXAMPLE EEPROM S930 ROW S215

Root / Recovery
Modifications, decorations, patches
Miscellaneous / Useful
Secret Codes
These codes are typed into the dialog dialing native dialer
#### 0000 # - Build Number
#### 1111 # - Factory Test Menu
* # 06 # - View IMEI
#### 5993 # - Internal Version
#### 8375 # - Kernel Version
#### 66336 # - Modem Version
#### 2222 # - View Serial Number

Uninstalling Lenovo Safecenter
We put a patch over rekaveriUniversal patch to remove the Lenovo Safecenterand add to the line build.propro.lenovo.check_safeapp = false

Remove the Chinese characters in the dialer to Vibe 2.0

Poll results
Attached Image



K
There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates
he can apply in the subjectI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedderak1129 - 15.03.20, 20:44
Reason for editing: Deleting broken links.



Rep: (47)
Mihbor3 @ 03/25/2014, 08:35*
Several nice chips for Vibe:

Not easier to usekitchenSo that for the sake of changing the battery icons not to drive into the bodies. As many as 16 meters ...? ;)



Rep: (470)
People, someone sewed new Vaib yourself? If so, how?

Post has been editedUARuslanUA - 27.03.14, 16:31



Rep: (47)
UARUSLANUA @ 03/27/2014, 17:30*
how?

How to flash vibe ui 1.5



Rep: (47)
Predated Boot (root shell) for firmware S930 ROW_S118_140127
Sew through vibe_row_flashtool

Attached files

Attached fileboot.img(4.66 MB)



Rep: (0)
Tell me please! Litched on the firmware [Custom ROM] S930_ROW_S117_140107 MOD by Stanner. Wi-Fi does not work. Does not connect, and there is no icon even in the upper bar.



Rep: (47)
coach7777 @ 03/29/2014, 23:00*
Wi-Fi does not work. Does not connect, and there is no icon even in the upper bar.

The icon appears after the connection.
Go to settings-->System-->WLAN
Enable Wi-Fi and select connection to your network.



Rep: (0)
Everything is done so (not the first time with the phone);) But nothing happens.
Thank you! figured out. There were problems with the router.

Post has been editedcoach7777. - 29.03.14, 22:40



Rep: (1)
Who stitched at 4.4 give screenshots and first impressions please: thank_you:



Rep: (16)
Tell me in the vibe firmware already have Russian?



Rep: (1)
What kind of update comes to KIT S129 someone in the course?
S930_S909_VIBEROM_V1.0_14.11_3_ST.



Rep: (2)
Hello. The question of the newcomer, and why do it: "14. Recommendations and features of the firmware (remind, lay out on Monday evening), finally:
- After the firmware, it is better to make Wipe from the recovery menu (to enter the recovery you need to press the power button on the off phone, after a short vibration, press the "Volume +" buttons and "volume" and keep the recovery menu)! "?



Rep: (974)
2pizzaua @ 04/01/2014, 11:53*
What kind of update comes to KIT S129 someone in the course?
Update to the last stable Chinese Vibe



Rep: (0)
Tell me please. I have at paragraph 11. "We are waiting for a while, the program will determine the connected phone and starts the firmware."
Nothing happens. The computer does not find the phone. What is the problem?



Rep: (974)
kiletsh Enabled connect? Then the USB Vcom drivers did not stand



Rep: (0)
Put USB VCOM, flashed according to the instructions. After turning on the text on the screen:
Encryption unsuccessful. Encryption WAS Interrupted and Can Not Complete. As a Result, The Data On Your Phone Is No Longer Accessible. To Resume using Your Phone, You Need to Perform a Factory Reset. WHEN YOU SET UP YOUR PHONE After the reset, You Will Have An Opportunity to Restore Any Data That Was Backdown Up to Accaunt
(Encryption was interrupted and cannot complete. Not as a result, the data on the phone is no longer available. To resume working with the phone, you need to reset the settings. When configuring the phone after a reboot, you will be able to restore any data that were copied with Accaunt )

After rebooting in the recovery, the menu cleaned these and after another reboot on the screen freezes the Lenovo logo and no more action.
Help please, otherwise I am already worried about how the device would not be killed



Rep: (1)
It goes into the eternal reboot firmware S930 Row_S118_140127 for Flash Tool What can I do?



Rep: (4)
BRAILJAN,
After what actions the problem appeared? Definitely sew again.



Rep: (5)
: rolleyes: Is it worth updating the firmware from the station from 117 to 118? Does the root fly, etc.?



Rep: (974)
Rukichikatakime @ 04/04/2014, 14:48*
Should I update the firmware from the station from 117 to 118?
Fashion are not updated "by air." Or stay on fashion, or with a PC flash S118 - and then you will receive future air updates (if you do not delete or change the system files).
Due to lack of time modes on S118 is not finished, but I work on it



Rep: (47)
Kiletsh @ 04/03/2014, 23:49*
Put USB VCOM, flashed according to the instructions. After turning on the text on the screen:

What instructions?
What sewed (name and ft version, where did they take)?
How sewed (in detail, step by step)?


Posted on 04/04/2014, 15:43:

BRAILJAN @ 04.04.2014, 08:47*
It goes into the eternal reboot firmware S930 Row_S118_140127 for Flash Tool What can I do?

Right flash.


Full version    

Help     rules

Now: 14.01.21, 02:17