[X]Assistant

[karasyov]

DNS AirTab M101w - Official firmware (OS 4.1)
DNS AirTab M101w
Description | Discussion пїЅ | Firmware (OS 4.1) пїЅ

All that you do - do at your own peril and risk!
Forum Administrationsavagemessiahzine.comand authors of modifications are not responsible for any damage to your device!
If you are not confident in your abilities and knowledge, if you do not know why you need a flashing, Root, CWM, etc., then it is better to refrain from experimenting with your device.

Drivers and Utilities

Firmware program:I.Disk
Drivers:

savagemessiahzine.com download

thankSergioPoverony

If you can not install drivers in Win8.1

Thanks for the instructionmaster_lie
Instruction
Instructions in PDF:I.Disk

Instructions

Firmware tablets on the processor RockChip RK3066. Features of connection and firmware on laptops and PCs running Windows 8, Windows 10. thankNikulyar49

Device firmware

1. Download the archive with the program for the firmware.
   
2. We download the archive c drivers.
   
3. We download the firmware itself.
   
4. Unpack in any folder. The main thing is that there are no Russian characters on the way.
   
5. Turn off the tablet.
   
6. Clamp the "Volume -" button on the tablet and connect the USB cable (without extension cables, adapters, USB hubs and other intermediaries)
   
7. The computer will find an unknown device. We put on it the driver from the archive.
   
8. Run RKBatchTool.exe
   
9. In the "Connected Devices" section, the green square with the number should be lit.
   
10. Next to the line "FW Path" button with three dots. Click and specify the firmware file (with the img extension).
    
11. Click "Upgrade". We are waiting for 1.5 - 2 minutes.DO NOT DISCONNECT THE CABLE DURING THE FIRMWARE
    
12. We are happy.

Getting root rights

There are 3 different ways to produceroot rightson this device. If you do not know why you need it, do not even try.

1. Plain.Installation using the programVRoot
   
2. Normal.Installing firmware with already built-in root-rights. See such firmware in the topic header, in the section unofficial firmware.
   
3. Complicated. Instruction

Without the participation of the computer.

1. Download the application and install it.Download the application
   
2. We go into the program, accept the conditions.
   
3. Click "Get Root"
   
4. Later, the application will notify you that the root has been received, but we do not end there.
   
5. Go to the Play Market.
   
6. Download the application "SuperSU"from authorChainfire!
   
7. We go in "SuperSU"and updating binary file.
   
8. Everything. An application that was installed at the very beginning can be deleted.

CWM installation

How to install readhere
Useful information on CWM (ClockWorkMod Recovery)here

Tablet disassembly

A warning!

All that you do with your tablet, do at your own peril and risk. Neither I nor the forum administration is responsible for your actions.

1. Open the microSD card stub.
   
2. We slip a thin object into the slot of the case, for example, a plastic card that is not needed
   
3. Slowly draw the card along the body and simultaneously snap off the cover latches.
   
4. As all the latches are disconnected, carefully lift the lid, note that the speakers are attached to the lid itself, do not tear off the wires going to them.
   
5. Disconnect the cable from the battery.
   
6. Disconnect the wires coming from the speakers on the back cover to the motherboard.

Thanks for the instructionPavel5250
Later add photos to the relevant paragraphs of the instructions.

Memory remapping

You can readhere
Thanks for the instructionilya-fedin

Official firmware

Official v2.01

A source:dns-shop.ru
Release date:16.06.2013
Version:2.01

Installation

1. Download the archive with the program for the firmware.
   
2. We download the archive c drivers.
   
3. We download the firmware itself.
   
4. Unpack in any folder. The main thing is that there are no Russian characters on the way.
   
5. Turn off the tablet.
   
6. Clamp the "Volume -" button on the tablet and connect the USB cable (without extension cables, adapters, USB hubs and other intermediaries)
   
7. The computer will find an unknown device. We put on it the driver from the archive.
   
8. Run RKBatchTool.exe
   
9. In the "Connected Devices" section, the green square with the number should be lit.
   
10. Next to the line "FW Path" button with three dots. Click and specify the firmware file (with the img extension).
    
11. Click "Upgrade". We are waiting for 1.5 - 2 minutes.DO NOT DISCONNECT THE CABLE DURING THE FIRMWARE
    
12. We are happy.

Download:DNS | I.Disk

Custom firmware information

More details can be found here.

Various fashion and decorations firmware

Various fashions and decorations firmware:Go to
Audio Engine for DNS AirTab m101w
Ubuntu style boot animation
Mac OS X Booth Animation

Changes in the cap

02/04/2018 Added a link to the instructions for connecting the tablet to windows 10 for firmware. thankNikulyar49
02.03.2016Added link to post with boot-animation in Mac OS X style. ThanksMeade917
24.06.2014Added link to post with boot-animation in Ubuntu style. thankilya-fedin
24.06.2014Added a link to the post with the audio engine.
28.04.2014Added a link to the post with the mods and decorations of the firmware.
27.04.2014Added instructions for the redistribution of memory on the device. thankilya-fedin
06.04.2014Added instructions for obtaining root-rights without using a computer. thankHa1se *
15.03.2014Optimization of the caps, by removing custom firmware in a separate post. Added CWM installation instructions.
14.03.2014Added instructions for obtaining root-rights.
13.03.2014Added instructions for disassembling the tablet.
07.03.2014Creating a theme and the first filling cap.

I ask you, SW. users, refrain from flooding, write on the topic, read the previous pages (now there is very little benefit), if the answer is not found either in the header or in the subject, write a question, speak correctly and competently, and preferably basically in essence, without further ado .

Newbies readForum Rules(at least go over, in short, with your eyes).

Dear users! If you have suggestions on the topic "What to change in the header for greater convenience,"write me in QMS

Post has been editedkarasyov - 04.02.18, 09:38

Reason for editing: Read all about changes under the spool "Changes in the header"

[Ice_Pit]

Tell me how to increase the space for applications? And then 1GB is very small.

[Ha1se *]

You gig little? o.O On my Fly IQ256 Vogue memory was 150 MB, I had enough in full!

[karasyov]

Ice_PitOnly flashing. Look in the header there are custom firmware, in which the size of the memory for applications is increased

[Airatik82]

Hello! I had a problem and a big request to help !!!
The problem is the following: After the firmware (of. From the site DNS firmware) after a while, the screen stopped. This manifests itself immediately as I turn on any application with a "portrait" orientation and does not want to go back. I tried to reset the factory, but the menu does not appear. Only a picture of an android dead. And so in the games gyro works. I think the problem is in the firmware, but I changed the "zero" effect with different ones.Panic at mnu already: angry:: suicide:

[Ice_Pit]

Karasyov @ 04/10/2014, 11:43

Ice_Pit, only by flashing. Look in the header there are custom firmware, in which the size of the memory for applications is increased

So there is one firmware and Vney also 1GB, maybe I missed another firmware?

[Ha1se *]

Airatik82,
Try to calibrate the sensor. Go to Settings>For developers>Gsensor calibrate
Further according to the instructions (although translated somehow flat, but you can understand)

[karasyov]

Ice_Pithere you looklink

[Airatik82]

Nothing helped. :( It is necessary to reboot and then normally. Can I try another firmware (custom)? Or another firmware? Which one?

Post has been editedAiratik82 - 14.04.14, 14:20

[Ha1se *]

Airatik82,
Well, clearly, we do not have stock recovery, as I understand it. Reset the system if necessary. Go to Settings>Restore and reset>Reset. If it does not reset, then we will try through the terminal emulator.

Post has been editedHa1se * - 14.04.14, 17:14

[Airatik82]

Ha1se *,
I tried to reset - it did not help. An android standing and with a “web” in the stomach appeared, it seemed that everything started in 1.5-2 seconds. went to reboot. There is something not clear. It turns off somehow abnormally (sharply). I tried again to flash, but already custom (official_v2_01 .img). By the way, the changes were not as described in the header. And resil through the button. No options. The strangest thing is that when he wants to work, when he wants not. Is there any other firmware program? Not RKBatchTool?
And through the terminal emulator is it like? How can it help?

Post has been editedAiratik82 - 15.04.14, 08:32

[Ha1se *]

Airatik82,
We no longer need the emulator, because the reset did not bring a good result. I think the lib files of the sensors have flown.
We need Root Explorer and Root access itself. Disable auto-rotate, download the archive I attached below, unpack and drop both files into system / lib / hw. On both files put the right "G". Then turn on auto-rotate. Planche will think and go into reboot (as it should be). The system will boot and turn as you please :). It should work, because I merged with my firmware, everything works fine for me.
Here is the archive:sensors.DNS.zip(25.22 KB)

[Airatik82]

probably better in sc?

[pavel5250]

Airatik82,
this is the easiest way

[Olezhka2001]

Hello! Friends, here is the question. Who ever tried to flash the way "Without the participation of a computer"? In a hat there is one. Just a computer in the service and it looks like a long time, but the root is very necessary .... well, in general, the main thing is to make it work, but I do not want to throw out the tablet in a landfill. Does this method work ???

Posted on 04/19/2014, 18:48:

Excuse me! Do not flash, but get the root in this way

[karasyov]

Olezhka2001,this way as saidHa1se *works. Try nothing terrible will happen.

[Olezhka2001]

Thank you very much! Now I will try and accomplish my goal.

[ilya-fedin]

Please throw someone / system / bin / bootanimation
Does KitKat development go?

[Ha1se *]

ilya-fedin
Here is the standard boot-animation binary.

Attached files

bootanimation.zip(10.9 KB)


Post has been editedHa1se * - 25.04.14, 16:23

[zirp33]

Hello to all! I bought this machine as a gift! I already read about memory for programs! Can anyone expand up to 4 gigs (based on the official v2.01)? A girl loves to install a lot of applications, I'm afraid 1 gig will go away instantly! :) Thanks in advance!!!

[ilya-fedin]

Memory remapping

I did the redevelopment under:

• 2 GB
  
• 3 GB
  
• 4 GB
  
• 5 GB
  
• 6 GB
  
• 7 GB
  
• 8 GB
  
• 9 GB
  
• 10 GB
  
• 11 GB
  
• Without internal SD

There is also a standard markup for rollback.
Instruction:

1. Download the firmware that is sewed through BatchTool (checked on the official 2.01)
   
2. Upload the firmware file to imgRePackerRK.exe
   
3. Rename the desired markup file in parameter
   
4. Contents of folder firmware_name.dump copyno replacementin RKAndroidTool \ rom
   
5. Copy Oma_RK30_JB_Format_NAND.zip and vold.zipon the outsideSd card
   
6. Put CWM in any way convenient for you (I did through the terminal)
   
7. Make Backup
   
8. Launch RKAndroidTool
   
9. Boot into the Loader in any way convenient for you (via the program, reboot menu or Power + Vol-)
   
10. Click Flash ROM and wait for the firmware to finish.
    
11. In CWM, flash Oma_RK30_JB_Format_NAND.zip (if you deleted the internal SD, then vold.zip)
    
12. Recover from backup
    
13. Reboot

Everything you need is in Repart.7z
PS: I think it is worthy of putting on the cap :)

Attached files

Repart.7z(5.55 MB)


Post has been editedilya-fedin - 19.05.14, 12:49