> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


596 pagesV  1 2 3 4 5 6 > »  
 
REPLY
> Highscreen Boost 2 SE - Official firmware
What is your revision?
What is your revision?
B [ 914 ] ** [25,21%]
C [ 1879 ] ** [51,82%]
A [ 833 ] ** [22,97%]
Total votes: 3626
 
eXense
Message#1
26.02.14, 14:52
Abel kalman
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 4482
Check in: 27.01.09
Wileyfox Swift 2 X

Reputation:-  691  +

Highscreen Boost 2 SE - Official firmware
PictureBoostIISE, D10A_HighScreen, JSR D10F, Innos D10F, Createl D10F, Pentagram Monster X5 Pro, i-mobile IQ 6.3, BRAVA Vega V
Description | Discussion | Official firmware | Unofficial firmware | Development - custom kernels and firmware | Modifications and decorations | HighScreen BOOST 2 SE CLUB

Appeal to users of Highscreen Boost 2 SE !!!
Want to warn your smartphone from
frequent breakage on this model?
Do not be lazy to perform several actions.
according to this instruction !!!

The official update to Android 4.4 and newer versions WILL NOT BE!
Newer versions of Android are available unofficially.
Read more about assemblies, description and discussion of their stability in the subject "Custom firmware"and"Development"

Important information

Remember:
Everything you do - you do at your own peril and risk!
The authors of the firmware and the Forum Administration are not responsible for the performance of your devices!
Before flashing, we strongly recommend backing up the entire memory of the device so that in case of failure you can restore the working state (more details on the spoiler below).


Attention!!! In this model of the device there is a frequent die-off of the built-in memory chip !!! It is recommended that each and every one make a complete memory dump and install a bootloader which allows flashing to the SD card instead of the internal memory if it suddenly fails.
Details in the instructions


  • In the subject are allForum Rulesand10 commandments novicewho is hard to master the forum rules.
  • To discuss and search for third-party programs / games, use the following sections:Android - ProgramsandAndroid - Games.
  • The topic discusses the firmware itself. All other questions must be asked in the discussion thread of the device, including the failure of the device. Such messages are considered offtopic and will be deleted.
  • If a forum member gave you good advice that helped you solve your problem, do not post a message with the text “Thank you! You are super!!!". On our forum, it is customary to express gratitude by raising the reputation of a particular participant. If you do not have 15 helpful posts, ask the moderator to raise the reputation of the person who helped you through the "Complaint" button.
  • Before posting an image, read the topic.Working with Images on the forum

  • Before asking a question, lookAndroid OS FAQandGlossary, try to find the answer to it by searching on the topic and read the header, if after that the answer is not found, ask it! Respect your and other people's time.


Instructions

IMPORTANT !!! Prevent death of eMMC by flashing to SD card.

Installing drivers and ADB
When the device is connected to the PC, a virtual disk with drivers appears, appears as "CD drive (? :) android_driver"and has an android icon. We strongly recommend that you install this driver package, it is usually enough for most operations with the device via PC.
Just in case the driver from this disk candownload (except for the drivers themselves in the archive there is a disk image with them).

For some operations you may needAdb or Fastboot swing here and unpack yourself, and what is it and why? will find out here .
More detailed instructions with screenshotshere ( Picturethankcomradebaddhet).
ADB for Ubuntu and LinuxMINT

Installing firmware via Recovery.

1. Download the necessary firmware in the spoiler with the firmware. Download the archive without unpacking copy to a memory card or internal device memory.
2. Turn off the device completely.
3. Press the volume up button and without releasing it, turn on the device with the power button. Hold the volume button until the menu appears as in the screenshot below.
Screenshot Standard Recovery
Attached Image

4. Select the item with the volume buttons"apply update from external storage"if copied to external memory, or"apply update from internal storage"If on the inside, the choice is confirmed with the power button. Next, select the file with IBL, at the end of its firmware in the same way choose TWRP.
5. Reboot the device by selecting"reboot system now".

Getting ROOT


ROOT is the superuser rights in your android, give you almost unlimited privileges in the operating system. By interfering with the operation of the system, you must be aware that only you are responsible for your actions. Do not give access to superuser rights to untested and unfamiliar programs !!!

Before installing root rights in this way, you must have custom recovery installed.

TWRP Recovery has its own ability to install root, if you do not have root installed on your device, TWRP will offer to install it before rebooting or shutting down, you just have to reboot and update SuperSU through the market.

Download TWRP RecoveryHEREand install it as firmware (instructions above).

If not installed and writes an error:
E: signature verification failed
Installation aborted
you probably need to sign your own recovery packageof this instruction.

Again we reboot into the recovery and see the already custom recovery, TWRP checks the presence of ROOT on the device when it is rebooted, and if it is not there, it offers to flash it, we agree. In extreme cases, you can pack the last package.SuperSUfor CWM and flash it.

Firmware via Smart Phone Update Tool

  1. Download and install the smart Phone Upgrade Tool, if necessary install the driver.
    Yandex Disk, Google Drive, [email protected], MEGA , Mediafire
  2. Download and unzip the firmware file.HighScreen_20150320_V3.2IIse_emmc.tar.gz .
  3. Start the program, click the “Browse” button, specify the path to the Version folder in the folder with the firmware.
  4. In the off state, hold down both volume buttons on the device and connect it to the computer. A message about the attached COM port should appear in the program window; if not, install the drivers and try again.
  5. Click the "Start" button. At the end of the firmware, the device program will inform about it.
The rest of the firmware and firmware versions of the program can be found on the links.Mediafire or MEGA


Old instruction with screenshots from axel52074 ( Picturethanks to him)


Instructions to remove the memory dump, to restore the firmware, when the phone does not respond to anything other than the appearance of disks or a com-port appears.
Instructions for restoring dump
Recovery Instructions
Instructions for the restoration of bad sectors.
Recovery of official firmware and recovery
Signing packages for firmware through stock recovery.
G-sensor calibration on firmware v2.3 and higher
How to flash the stock kernel.
Repair IMEIOption 1, Option 2, a small program to help, in addition to her
Rollback instructions from 2.7 to 2.4 beta
How to upgrade to 3.1 of without data loss.

Drivers and Utilities
Firmware

Official

All stock assemblies:
Yandex Disk, Google Drive, [email protected], MEGA , Mediafire

To version 3.1 and 3.2 officially updated automatically via the Internet on the principle of FOTA (Firmware Over The Air) only from version 2.9 to 3.1 and from 3.1 to 3.2, you may have to dodata resetorflash 2.9 newif the update does not want to be installed.
Requires an application "Software Update"andstock recovery, if you did not delete the system applications and did not reflash the recovery, then everything should be fine.

It is also possible to flash from a personal computer via SPUT (Smart Phone Update Tool):
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire

20150320_V3.2IIse (officially only through FOTA (Firmware Over The Air) or through SPUT (Smart Phone Update Tool).
For firmware with SD there isrepack ).
20141226_V3.1IIse (officially only through FOTA (Firmware Over The Air) or through SPUT (Smart Phone Update Tool).
For firmware with SD there isrepack ).
20141202_V2.9IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140927_V2.8IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140722_V2.7IIse (removed from the official site due to user complaints)
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140611_V2.4IIse (beta)
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140426_V2.3IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140401_V2.2IIse (beta)
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140310_V2.1IIse (beta)
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140118_V1.9IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
List of changes

3.2
Solved the problem with noises that could be heard when playing calm and quiet music.
Fixed color scheme of SIM-cards for better navigation among SIM.
Improved overall system stability.
Fixed translation shortcomings.

3.1
Fixed a problem with freezes and spontaneous reboots on some devices.
Solved the problem of incorrect display of the time zone.
Solved the problem with resetting time on some devices after a short shutdown.
The problem with the inverted image is solved when shooting video in some applications.
Improved overall system stability.
Fixed translation shortcomings.

2.9
Fixed a problem with freezes and spontaneous reboots on some devices.
Improved overall system stability.
Fixed translation shortcomings.

2.8
Blue screen issue resolved
Improved overall system stability.
Fixed translation shortcomings.

2.7
The first firmware for revision C, previous firmware versions on this revision will not work, or will work with errors.

2.4 beta
Improved voice quality
Improved overall system stability.
Fixed translation shortcomings.

2.3
Fixed incorrect auto-brightness
Fixed incorrect display of the name of the contact when an incoming call
Fixed incorrect display of the name of alarms
Improved overall system stability.
Fixed translation shortcomings.

2.2 beta
OTG feature debugged
Fixed auto-focus when shooting video
Improved Bluetooth module performance
Improved overall system stability
Fixed translation shortcomings.
Added featureManual G-Sensor Calibration

2.1 beta
Fixed a problem with the hang of the device when an incoming call.
Improved operation of the GPS module.
Improved overall system stability.
Fixed translation shortcomings.

1.9
Solved the problem with poor sound quality during voice calls.
Added a function to bind the launch of the selected application to the quick launch button.
Improved overall system stability.
Fixed translation shortcomings.

Significant changes from users

1.8
Frequent falling asleep and intermittent sound distortion during a conversation. The device is not looking for a network after a long outage.

1.9
Intermittent sound distortion during a conversation fixed, some users have not confirmed the fix.

2.1 beta
The screen brightness is too low. An issue with falling asleep has been resolved; some users have not confirmed the fix.

2.2 beta
The screen brightness is fixed, the problem with falling asleep is solved.

2.3
Stable release (for revisions A and B), a noticeable improvement in communication.

2.4 beta
There are no significant changes, problems with a long absence of a network are still present.

2.7
Regular falling asleep devices without the ability to turn on, with the appearance are accompanied by graphic artifacts in the form of strips or completely blue screen. After a lot of complaints, the build was removed from the official site. With this firmware, a new revision C was released, this revision contains a bug with reversing the image from the camera in third-party applications.

2.8
Solved the problem with the "blue screens", but the phone began to fall asleep during charging.

2.9
Solved the problem with falling asleep, but when you restart, the time is reset.

3.1
Solved problem with resetting time at reboot. For revision C, the reversal of the image from the camera in third-party applications has been fixed.



Official repack

20150320_V3.2IIse - repack firmware 2.9 with updates 3.1 and 3.2 for stock recovery.
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20141226_V3.1IIse - firmware repack 2.9 with update 3.1 for stock recovery.
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire

Deodexed official
(suitable for flashing stock recovery)
All stock deodexed:
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire

20150320_V3.2IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20141226_V3.1IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20141202_V2.9IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140927_V2.8IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140722_V2.7IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140611_V2.4IIse (beta)
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140426_V2.3IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140401_V2.2IIse (beta)
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140310_V2.1IIse (beta)
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire
20140118_V1.9IIse
Yandex Disk , Google Drive , [email protected] , MEGA , Mediafire

Repack stock 3.1 with cut Gapps

Further assemblies were not officially published, they were collected from dumps of one of the first copies on sale:
v1.8 for custom recovery
v1.5 deodexed


miscellanea
Question answer

  • Question: How to install custom recovery?
    Answer: Spoiler "instructions". To begin, "Installing the driver and ADB", then in the subjectcustom firmware"Instructions">"Install Recovery".
  • Question: The driver is not installed, what should I do?
    Answer: 1. Try to insert the cord into the rear USB port of the system unit.
    2. Maybe you have "crooked" windows installed (If you do not have a license), try reinstalling the OS or try it on another computer.
  • Question: Why do I need a custom recovery?
    Answer: Custom recovery is needed to install any firmware, patches, modems, cores, etc., as well as to remove and restore backup copies of the device contents.
  • Question: How to get ROOT rights?
    Answer: We also look at the instructions spoiler.
  • Question: How to enter the phone in fastboot mode?
    Answer: To enter fastboot mode, turn off the phone. Hold down the volume down button and turn on the phone. The eternal inscription Highscreen should appear.
  • Question: How to enter the phone in the recovery mode?
    Answer: To enter recovery mode, turn off the phone. Clamp the volume up button and the phone's power key.
  • Question: After flashing the phone hangs on the boot animation, what should I do?
    Answer: 1. The first download can last up to 15 minutes.
    2. If you still have not booted, make a factory reset to recovery.
    3. If you still do not boot, change the recovery.
  • Question: It is not stitched through the recovery, it gives errors even when cleaning partitions.
    Answer: Try to flash through the Smart Phone Update Tool, details in the spoiler "Instructions"
  • Question: What is my revision?
    Answer:Look hereorhere
  • Question: The interlocutor does not hear me well, what should I do?
    Answer: Try changing the modem firmware, under the modem and kernel spoiler.
  • Question: How to overclock the core?
    Answer: While there are no kernel sources, there will be no overclocking.


Cap updates
  • 2017.10.04 - Updated information about firmware via SPUT.
  • 2016.05.18 - The theme from this moment will be only on the official firmware.
  • 2016.05.15 - Added a warning about frequent breakdown characteristic for this model and its solution.
  • 2016.04.25 - Added TWRP Recovery 3.0.2-0, added instructions for firmware on SD
  • 2016.03.24 - Added instructions for sprinkling.
  • 2016.03.20 - Added 3.2 batch and modem Redmi 1s
  • 2016.03.09 - Putting order in the header, adding instructions for memory dump.
  • 2016.03.03 - Added TWRP Recovery 3.0.0.0 by S-trace
  • 2016.02.08 - Added TWRP Recovery 2.8.7.0M by S-trace
  • 2015.10.25 - Added slightly modified MIUI firmware
  • 2015.10.04 - Sauron Kernel added
  • 2015.09.01 - Added description of connecting NTFS media.
  • 2015.07.24 - TWRP 2.8.7.0 recovery from S-trace on acdev core added
  • 2015.06.07 - innos 3.5 firmware added
  • 2015.05.31 - the gapps and some applications removal packages were updated, the minimum set of gapps 4.3 in the "Miscellaneous" spoiler, a patch for 3.2 was added to the internal SD as the main application.
  • 2015.05.29 - Added instruction for dumping memory via ADB from baddhet
  • 2015.05.01 - Pentagram Monster X5 modem added
  • 2015.04.21 - Added Eve Edition by iM @ xiMus, added modem 3.2
  • 2015.03.04 - official firmware version 3.2 added
  • 2015.04.03 - added innos 3.4 firmware from baddhet, added GAPPS removal packages, added 3.1 firmware with cut GAPPS
  • 2015.03.26 - added mirrors on Yandex, Google and Mail for all stock and deodexes
  • 2015.03.25 - all deodexed assemblies were reassembled, signed for stock recovery, flooded with mirrors to avoid loss.
  • 2015.03.22 - firmware 3.1 has been added: completely clean repack for stock recovery, modem and boot from innos 3.4
  • 2015.03.18 - added brief installation instructions for Recovery via ADB
  • 2015.03.17 - added a brief instruction for installing drivers and ADB.
  • 2015.03.16 - spoilers with firmware were sorted, now descending order, actual links names, missing authors of the assemblies in the signatures to the links added.
  • 2015.03.15 - added Sylon Edition 3 firmware, added instructions for signing packages for firmware through stock recovery, updated instructions for obtaining ROOT and custom recovery without a PC.
  • 2015.03.12 - added a small note about getting root rights and custom recovery without the help of a PC, added instructions on firmware via the Smart Phone Update Tool.
  • 2015.03.06 - added innos 3.4 firmware, apparently was overlooked earlier, added instructions for restoring the dump.
  • 2015.02.27 - the spoiler from the recovery is sorted, the latest stock recovery suitable for the firmware has been added, added the latest recovery from s-trace, rewrote the instructions for getting the root, added mirrors of official firmware.
  • 2015.02.26 - eXense appointed curator


Archive of changes.

01/19/2015 Added by TWRP recovery 2.8.4.0 by S-trace
01/10/2015 Added Firmware based on official v2.9 KiKat mod by Baddhet
01/05/2015 Added TWRP recovery 2.8.3.0 by S-trace
12/28/2014 Added Patch, correcting bands in recovery, Modem Monster v1
12/22/2014 Posted by Modem Innos v3.3
12/18/2014 Innos 3.3 Firmware Added by Megakaban_
12/13/2014 Added Firmware, modem and core from office. 1.5
11/18/2014 Added by CWM 6.0.5.1 by baddhet
11/16/2014 Added Innos 3.2 Firmware from Megakaban_ Innos Modem v3.2
10/27/2014 Added by TWRP recovery 2.8.1.0 by Baddhet
10/23/2014 Added Innos 3.1 Firmware by Megakaban_
10/21/2014 Added Firmware HighScreen Boost 2 SE Version 2.8 MINI
10/19/2014 Added Sylon Edition Firmware v2 by M @ ximus
10/16/2014 Added Firmware based on official v2.8 by Baddhet
10/12/2014 Added Innos v3.0 firmware from Megakaban_
09/12/2014 Added firmware BoostII SE-repack-ND by noskojv
09/07/2014 Added by Sylon Edition by M @ ximus
09/03/2014 Added TWRP recovery 2.7.0.0 rev. C
08/30/2014 Added Innos v2.7 Firmware from Megakaban_
08/23/2014 Added Instructions for the restoration of bad sectors.
08/20/2014 Mini utility added to simplify the installation of recovery via fastboot.
08/19/2014 Added Instructions for rolling back from 2.7 to 2.4 beta
08/06/2014 Added Firmware based on official 2.7 KitKat mod by Baddhet
08/05/2014 Added Modem and Core v2.7
07/30/2014 Added Firmware based on official v2.4 beta
07/23/2014 Added Modem and kernel v2.4 beta
07/23/2014 Official firmware added v2.4 beta
07/12/2014 Added Firmware LIVE_by_IWEWNI
07/11/2014 Added Baidu Firmware 6
07/05/2014 Added by CWM 6.0.4.9 by baddhet
07/05/2014 Added Innos v2.4 Firmware by baddhet
06/17/2014 Added Innos Firmware v2.3 by baddhet
06/14/2014 Added Modem and core Innos 2.3
06.06.2014 Added Program for editing IMEI
06/06/2014 Added Modem and kernel from Innos v2.2 firmware
06.06.2014 Added Repair IMEI
05/24/2014 Innos 2.1 Firmware Added
05/16/2014 Added How to flash the stock core.
05/15/2014 Added Modem and kernel from Innos v2.1 firmware.
05/11/2014 Added Firmware based on official v2.3.
05.05.2014 Added Calibration of G-sensor on firmware v2.3
05/04/2014 Added instructions for setting up ADB
05.03.2014 Added QSensorTest Application from 2.2beta firmware
05.03.2014 Added new boot logo
04/30/2014 Added Official firmware v2.3
04/27/2014 Updated TWRP 2.7.0.0 beta 0.5
04/25/2014 Delete The installation of custom recovery MIUI instruction is no longer relevant.
04/25/2014 Added by TWRP Recovery 2.7.0.0
04/25/2014 Posted by Stock (official) recovery
04/19/2014 Patch added to replace internal memory with external
04/09/2014 Added instructions Installing custom MIUI and CWM recovery (with pictures)
04/07/2014 Added Update CWM from Ruslan


Poll results

Attached Image
Attached Image




There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.


Post has been editedvaalf - 30.10.18, 19:34
ruslan_3_
Message#2
19.02.14, 20:06
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6072
Check in: 10.07.10
Xiaomi Mi 8

Reputation:-  1054  +

And so, how to remove the image from the body.
1. Download the archiveAttached fileQPST_2.7_378.zip(14.68 MB)
install.
2. After installation we go and look forQPST configuration
3. Chooseport>Add new portand add diagnostic port
4. Next, look for a program in qpst, calledMemory debugand run
5. ClickBrowse, select the port.
6. Next, clickGet regions, he will ask to reboot the body in modeDownloadagree
7. And that's all, the body will go into this mode, Windows will find a bunch of disks,REFUSE FROM FORMATTINGand run the programhdd raw copy Attached filehdd + raw + copy.zip(654.31 KB)


According to the idea all) If we write something))

Post has been editedbaddhet - 17.11.14, 19:05


--------------------
One who lovesbreak, and then just think, like thisrestore)))
If you want to help, write in a personal device. I am not Nostradamus.
ruslan_3_
Message#3
19.02.14, 20:45
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6072
Check in: 10.07.10
Xiaomi Mi 8

Reputation:-  1054  +

And so, asking for stock 1.8
Cast from custom recovery
Reference
After installation, doing all the wipes is MANDATORY!


--------------------
One who lovesbreak, and then just think, like thisrestore)))
If you want to help, write in a personal device. I am not Nostradamus.
ruslan_3_
Message#4
19.02.14, 22:39
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6072
Check in: 10.07.10
Xiaomi Mi 8

Reputation:-  1054  +

Patch for workOTG
Attached fileotg.zip(6.51 MB)

Install from custom recovery
The initial picture will beinnos, nothing wrong)
Shl ... For the work of OTG, I used a progOTG Disk Explorer Lite
Zyy ... I first flew the root, well, I think that I just forgot to turn off the check in the kernel, according to the idea everything should be right now.

Post has been editedruslan_3_ - 20.02.14, 11:37
Reason for editing: In the header


--------------------
One who lovesbreak, and then just think, like thisrestore)))
If you want to help, write in a personal device. I am not Nostradamus.
snekt
Message#5
27.02.14, 10:54
sine ira et studio
*********
[offline]

Group: Moderators
Messages 3310
Check in: 31.08.12
Huawei P30

Reputation:-  1060  +

M
We move to subsectionHighscreen .
zet611
Message#6
27.02.14, 18:42
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 406
Check in: 18.09.10
Honor 10

Reputation:-  33  +

How to make a backup system (detailed instructions)


All thanks and encouragements to the user ruslan_3_

All actions at your own risk

Training:
1) Connect the phone modeSD cardin the "My Computer" runAndroid_driverand install.
Attached Image

2) Switch the phone connection mode to "Charging only"

Create a copy:
1) DownloadQPST_2.7_378.ziprunQPST.2.7.378.msiorsetup.exe
Make sure that you have installed microsoft visual c ++ 2005, if it does not exist, install it from the foldervcredist_x86
2) Go and runStart->All programs->QPST->QPST Configuration
3) Chooseport>Add new portand click onUSBport and clickOK
Attached Image

Attached Image

4) Go and runStart->All programs->QPST->Memory debug
5) PushBrowse, select the created port
Attached Image

6) Next, clickGet regions, the program will ask to restart the phone in the modeDownloadagree If this does not happen, then translate it.in this way
Attached Image

7) The phone goes into modeDownloadon the monitor screen you will see a message about connecting multiple hard drives and a suggestion to format them.For all offers formatwe refuse!
8) Downloadhdd raw copyand run (the program does not require installation).
9) ChooseUSBHDDqualcomm mmc storagewe presscontinue
Attached Image

10) Afterqualcomm mmc storagewill disappear from the list of hard drives and only your hard drive will remain andFILE Double click to open filedouble click onFILE Double click to open file
11) Choosing a placewhere to save, write the name, click Save
12) The program window will reappear.hdd raw copyselect the FILE item and clickcontinue
13) In the window that appears, clickSTART
Attached Image

14) After the download is completed, close the program window, disconnect the USB,We take out the battery for 5-10 seconds from the phone and turn it on.
Question answer
Question: Do I need to install Qualcomm firewood before installing the phone's firewood? (If yes, which ones?)
Answer: Personally, I did not install any additional drivers.

Question: Disable USB debugging? Yes-No-Not important (if you disable at which point?)
Answer: Personally, my USB debugging was turned off before all processes started.

Question: Is it necessary to juggle the battery to take the phone out of the Download mode or just press the Power key for 8-15 seconds?
Answer: Personally, I tried all the ways I knew how to turn on the device, except to pull out and insert the battery nothing helped. Perhaps you will find your way.

My system: windows 7 maximum x64 service pack 1


Post has been editedbaddhet - 03.12.14, 12:30
Reason for editing: Added the option to download the phone in download mode.


--------------------
Victory or death!
ruslan_3_
Message#7
01.03.14, 01:29
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6072
Check in: 10.07.10
Xiaomi Mi 8

Reputation:-  1054  +

Who scratches his hands, and can not live without experiments, here's a modem from China, the last one.GSM versionAttached fileD10A_ROM_D10F_1.4.zip(21.42 MB)

Put out of custom recovery

Post has been editedruslan_3_ - 01.03.14, 01:30


--------------------
One who lovesbreak, and then just think, like thisrestore)))
If you want to help, write in a personal device. I am not Nostradamus.
ruslan_3_
Message#8
01.03.14, 11:53
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6072
Check in: 10.07.10
Xiaomi Mi 8

Reputation:-  1054  +

So...
Modem boost2se_1.8Attached filemodem_1.8.zip(21.44 MB)

Modem boost2se_1.9Attached filemodem_1.9.zip(21.41 MB)


Everything is put out of custom recovery

Post has been editedruslan_3_ - 01.03.14, 11:54


--------------------
One who lovesbreak, and then just think, like thisrestore)))
If you want to help, write in a personal device. I am not Nostradamus.
baddhet
Message#9
01.03.14, 14:23
Starting a new life.
*********
[online]

Group: Curators
Messages 2561
Check in: 03.04.12
Xiaomi Redmi Note 4X Snapdragon 3/32

Reputation:-  699  +

ruslan_3_,
Share a secret, where did you get the stock recovery for our device?


--------------------
Xiaomi Redmi Note 4X
If there are people who learn German and live in St. Petersburg, write in a personal, we will communicate in German.
ruslan_3_
Message#10
01.03.14, 14:32
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 6072
Check in: 10.07.10
Xiaomi Mi 8

Reputation:-  1054  +

baddhet
dd if = / dev / block / platform / msm_sdcc.1 / by-name / recovery of = / sdcard / recovery.img


--------------------
One who lovesbreak, and then just think, like thisrestore)))
If you want to help, write in a personal device. I am not Nostradamus.
lehich-96
Message#11
02.03.14, 06:51
Old resident
*******
[online]

Group: Friendssavagemessiahzine.com
Messages 853
Check in: 02.03.13
Xiaomi Redmi Note 4 4/64

Reputation:-  104  +

What could be the problem? Yesterday I took the device, I have not changed anything yet. When you try to update the phone, it downloads the update and is loaded into the recovery, the progress bar appears, but the update only reaches 1/5 somewhere and reboots. Then it gives out
Attached Image


--------------------

Xiaomi Redmi Note 4X 4/64 - CM 14.1 download


If you are not able to cope with the bug, then obzovite it Fichey!
rasbora1
Message#12
02.03.14, 08:43
Veteran
********
[online]

Group: Friendssavagemessiahzine.com
Messages 1543
Check in: 04.03.09
Xiaomi Mi Note 3 6/64

Reputation:-  108  +

lehich-96 @ 03/02/2014 06:51*
What could be the problem? Yesterday I took the device, I have not changed anything yet. When you try to update the phone, it downloads the update and is loaded into the recovery, the progress bar appears, but the update only reaches 1/5 somewhere and reboots. Then it gives out

Try therefore the methodhttp: //support.highscr...a-highscreen-boost-2se


--------------------
Xiaomi Mi Note 3 6 / 64G + Amazfit Bip + Hidizs AP100 + Xiaomi Mi In-Ear Headphones Pro HD + Amazon Kindle 4 (black) + Nikon D3300
baddhet
Message#13
02.03.14, 15:37
Starting a new life.
*********
[online]

Group: Curators
Messages 2561
Check in: 03.04.12
Xiaomi Redmi Note 4X Snapdragon 3/32

Reputation:-  699  +

Installing drivers and setting ADB for windows 7/8
Perhaps suitable for windows xp.

1. Download and unpackAttached fileABD.zip(402.86 KB)
mirroron the shortest path and without Cyrillic example: C: / adb /
Attached Image

2. Connect the included phone to the computer. USB debugging should be enabled by default, if you turned it off, turn it on. On the icon "My Computer / This Computer" click the right mouse button, in the context menu, select "Properties".
Attached Image

3. In the window that opens, on the left we look for the "Device Manager" we poke)
Attached Image

4. In the "Device Manager" window, we see the connected device, I have this "YunOS ACB phone", click on it 2 times, so that the list opens, we see "YunOS ACB Interface". If you have the driver installed go to step 6.
5. If there is a yellow triangle next to your device, it means you have no drivers installed. Download the driver from this.fasting. We unpack to any place. In the "Device Manager" window, right-click on your device, select "Update driver" in the context menu.
Attached Image

In the window that opens, select "Run a search for drivers on this computer."
Attached Image

In the window, click "Select driver from the list of already installed drivers"
Attached Image

Next "install from disk"
Attached Image

Next "review"
Attached Image

We follow the path of the unpacked driver. Select the android_usb.inf file and click the open button.
Attached Image

Next, in the window, click "OK"
Attached Image

In the window, select the first driver and click "next"
Start at point 4.
6. On our device, right-click in the context menu, select "Properties". In the window that opens, go to the "Details" tab. Under the "Properties", open the list and select "Equipment ID".
Attached Image

Here we are interested in what I circled, I have this "05C6". If you have other characters, write down or remember.
7. Download archiveAttached fileadb_usb.ini.zip(248 bytes)
mirrorWe pull out the file from there and throw along the path C: / Users / User_Name/.android. It should be something like this.
Attached Image

If you don’t have any files there, then something scary will appear. If there is no .android folder, then you need to place the archive along the path C: / Users / User_Name / right-click on this archive, select "Extract to the .android folder" in the context menu
8. In the .android folder, open the adb_usb.ini file with any text editor.
Attached Image

Just in this file you need to replace with your 4 characters that you had to remember. Or do not touch if you have the same characters.
Be sure to restart the computer.
9. In the folder C: / adb / with the Shift button held down, right-click on an empty space. In the context menu, select "Open command window"
Attached Image

10. The command line opens, we write adb devices
Attached Image

The command line should be written as I have in the screenshot.
List of devices attached
............................ device
Instead of points there should be symbols.

Done! ADB is finally set up!
For those who do not know what ADB isADB and all that can be done with it

FurtherInstall Anyone (whether official or custom) recovery

Post has been editedbaddhet - 21.10.14, 21:26


--------------------
Xiaomi Redmi Note 4X
If there are people who learn German and live in St. Petersburg, write in a personal, we will communicate in German.
TheFulDeep
Message#14
10.03.14, 19:35
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 09.03.14
Highscreen Zera S Power

Reputation:-  1  +

Sorry, I have a little problem. When I enter the fastboot, the computer does not see the phone at all. I installed the driver, but there is also an incident here: all the drivers are installed except one - Microsoft Corporation Net. I have a Windows 8.1 Professional x64 OS. If anyone knows how to solve this problem, please help.
ref123
Message#15
10.03.14, 19:47
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 485
Check in: 02.03.12
Xiaomi Mi 5S 4/32

Reputation:-  25  +

TheFulDeep,Perhaps somehow it will help disabling digital signature verification
baddhet
Message#16
11.03.14, 06:05
Starting a new life.
*********
[online]

Group: Curators
Messages 2561
Check in: 03.04.12
Xiaomi Redmi Note 4X Snapdragon 3/32

Reputation:-  699  +

Install Anyone (whether official or custom) recovery

First, we do everything according to the instructions.Installing drivers and setting ADB for windows 7/8
Made? OK. Go ahead.

1. Download any recovery under the recovery spoiler in the topic header:
Attached Image

You need exactly the file format .img for example recovery.img. Download the downloaded file to the folder C: / adb /
2. Turn off the phone. We take out the battery for 10-15 seconds (not necessary, but sometimes necessary), insert it back. Press the volume down key and turn on the device and hold for 5 seconds. Will appeareternalHighscreen (fastboot mode). We connect the phone through the wire to the computer.

3. To simplify the firmware, the recovery wrotemini utilityor you can make pens.
Handles: In the folder C: / adb / with the Shift button held down, right-click on an empty space. In the context menu, select "Open command window":
Attached Image

4. In the window that opens, write fastboot devices and see the following:
Attached Image


Then we write fastboot flash recovery recovery.img by pressing enter, then we write fastboot boot recovery.img by pressing enter
Attached Image

Done! The phone itself will boot into the recovery!

Post has been editedbaddhet - 24.05.15, 20:02


--------------------
Xiaomi Redmi Note 4X
If there are people who learn German and live in St. Petersburg, write in a personal, we will communicate in German.
boss280899
Message#17
11.03.14, 08:57
Veteran
********
[offline]

Group: Friendssavagemessiahzine.com
Messages 1705
Check in: 10.10.10

Reputation:-  132  +

TheFulDeep @ 10.3.2014, 22:35*
Sorry, I have a little problem. When I enter the fastboot, the computer does not see the phone at all. I installed the driver, but there is also an incident here: all the drivers are installed except one - Microsoft Corporation Net. I have a Windows 8.1 Professional x64 OS. If anyone knows how to solve this problem, please help.

What shows when fastboot come in? And what buttons you press at the same time?
tosha999
Message#18
11.03.14, 10:28
a guest
*
[offline]

Group: Users
Messages 7
Check in: 27.09.13
Highscreen Boost 2 SE

Reputation:-  0  +

connected OTG, FAT32 sees, but not in NTFS, how can I make it seen?
and more, whether the USB keyboard will work, it would be cool))))
I'm & y
Message#19
11.03.14, 17:56
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 620
Check in: 27.12.12
DEXP Ixion XL 5

Reputation:-  87  +

I tried to change the update HighScreen_20140118_V1.9IIse_SDUpdate.zip from off.site today: put in my audio and removed some files from the system / app like embedded live wallpaper. Then I signed the archive with the program signscript.zip, in the stock recovery I made a couple of wipes and launched the installation: apply update from sdcard>gave an error>
E: signature verification failed
Installation aborted.
PS The update itself HighScreen_20140118_V1.9IIse_SDUpdate.zip from off.site gets up without problems.
Maybe there is another option to run the modified update through the stock recovery?
(HighScreen boost II se phone)

Post has been editedI'm & y - 11.03.14, 17:58


--------------------
dexpXL + 32Gb10class / Miui SU 7 v6.5.26, v1.7, v1.6 stok /
bIIse (rev.A) + 32Gb64Gb10class (alive) /v2.8, v2.4b,v2.7, v2.4b, v2.3, v2.2b, v2.1b, v1.9, v1.8 stok /
iq441 (230912) + 32Gb10class (live) / MIUI 5 v4.2.28 DualSim, SW11 stok /<= q230 + 32Gb10class (live)<= k700 40Mb (live)
tosha999
Message#20
11.03.14, 20:27
a guest
*
[offline]

Group: Users
Messages 7
Check in: 27.09.13
Highscreen Boost 2 SE

Reputation:-  0  +

Tosha999 @ 03/11/2014, 1:28 PM*
connected OTG, FAT32 sees, but not in NTFS, how can I make it seen?
and more, whether the USB keyboard will work, it would be cool))))


Che it probably did not do that, now NTFS sees)))
I'm & y
Message#21
11.03.14, 21:13
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 620
Check in: 27.12.12
DEXP Ixion XL 5

Reputation:-  87  +

boost II se. I did a backup of the v1.9 system (before that, with the help of picks, shovels and some kind of mother, I made a backup v1.8).
Win7sp2x32max. Firewood is needed only on the phone (all other Qualcomm types are not needed!).

Installation procedure (preparation):
1. Connect the included phone with a native USB cable to the computer (it is desirable to use the direct USB output of the motherboard, from the power supply side)
2. Disable USB debugging on the phone (if enabled)
3. Switch the mode "Charging" to the mode "SD-card"
4. Install the driver from the Android_driver phone, there are no others and there is no need!
5. Switch the mode "SD card" mode to "Charging"

Further order from the header - Creating a copy: ...

PS v1.8 turned out 470Mb, v1.9 turned out 2.83Gb, both were done for 10 minutes. Both after resetting to factory settings. Difference: the first one has a reset from the phone settings + a phone memory format, the second has two wipe from recovery.

PSS Rebooted computer. I removed both SIM cards and an SD card from the phone. I made a reset from the phone settings + phone memory format. I repeated the creation of a backup. I tried to install drivers during preparation, but I don’t need to do this - they are already there, although some are not displayed: QPST did not have Qualcomm HS-USB Diagnostics. The choice of ports did not change and as a result I received another 2.82Gb backup.

When re-backup:
1. Run preparation points, but do not install drivers
2. Do not delete or try to change the choice of COM ports in QPST
3. Free space to save at least 3Gb

(why the first time 100% turned out 470Mb is not clear ...)

Post has been editedI'm & y - 11.03.14, 22:39


--------------------
dexpXL + 32Gb10class / Miui SU 7 v6.5.26, v1.7, v1.6 stok /
bIIse (rev.A) + 32Gb64Gb10class (alive) /v2.8, v2.4b,v2.7, v2.4b, v2.3, v2.2b, v2.1b, v1.9, v1.8 stok /
iq441 (230912) + 32Gb10class (live) / MIUI 5 v4.2.28 DualSim, SW11 stok /<= q230 + 32Gb10class (live)<= k700 40Mb (live)

596 pagesV  1 2 3 4 5 6 > » 


 mobile version    Now: 05/19/19, 21:08