Assistant
THEME IS CLOSED |
LG Optimus G Pro - CyanogenMod / AOSP Firmware |
Message#1 23.02.14, 12:01 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 2904 Check in: 02.07.12 Oneplus 6 8GB RAM Reputation: 409 | LG Optimus G Pro - CyanogenMod / AOSP Firmware E980, E985, E986, E988, E989, F240L, F240S, F240K Description | Discussion � | Modification and Ornaments �| Accessories � | Purchase � | Camera talk � | Owners Club LG Optimus G Pro � | Official firmware � | MIUI firmware � | CyanogenMod firmware � Drivers and Utilities
Firmware Official custom firmware: ► CyanogenMod 12.1 --11-- | latest stable build CM12.1 � ► CyanogenMod 11 � BlissPop (5.1.1) | Link � | Off site � � Mokee-. (5.1.1) | Link � | Off site � | Feedback � Informal custom firmware:
Instructions How to flash a smartphone:
Instructions: â–º Download firmware out of the box for your device:http: //csmg.lgmobile.c...el_check2.jsp? esn = IMEI , where insteadIMEIenter the 15-digit IMEI of your device.
Sign inDownload Mode(Bootloader mode) 1. Turn off the device; 2. Press both volume keys (+ and -); 3. Connect to the computer without releasing the buttons; 4. The phone will enter download mode. Sign inCWM(ClockWorkMod) 1. Turn off the device; 2. Press the volume down button; 3. Without releasing, press the power button; 4. "FACTORY HARD RESET" will appear; 5. Press the power button twice; 6. The phone will enter Recovery. Sign inTWRP(CWM Method 2) 1. Turn off the device; 2. Press the volume up button; 3. Without releasing, press the power button; 4. Hold until the phone blinks 2 times with touch buttons; 5. Release the buttons; 6. The phone will enter Recovery. Sign inSafe mode(Safe mode) 1. On the phone off, hold down the power button; 2. We are waiting; 3. When the LG boot animation appears, we hold down the volume down button; 4. The phone will enter Safe Mode. Kernels CM10.2 ---------- CM11
CM12.1
Modifications and Utility For CM12 / 12.1 Interface:
Network:
For CM11 ® SuperSU versions of gapps Changes in the header: 2016: April
February
January
There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links. Post has been editedsnekt - 10.12.17, 10:09 Reason for editing: editing according to the rules for the design of headings |
Message#42 20.03.14, 23:47 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 317 Check in: 31.03.12 ZTE Axon 7 A2017G Reputation: 2 | I tried to slim the slim network. I sit on a binstalk like normal but at war with a viper -------------------- |
Message#43 02.04.14, 16:44 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 84 Check in: 15.10.12 LG Optimus G Pro Reputation: 1 | There is a question! Is it possible to change the assignment of the quick button to CM 10.2 Stable ??? |
Message#44 02.04.14, 17:24 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 317 Check in: 04.11.11 Motorola C350 Reputation: 56 | koshak1507, menu>buttons>search button |
Message#45 14.04.14, 13:38 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 317 Check in: 04.11.11 Motorola C350 Reputation: 56 | On xda, the kernel theme is modified on CM11 (I think from the mcaserg source) here's the themehttp: //forum.xda-devel...d.php? t = 2711585 & page = 2 The first alpha has already appeared. You can download from herehttp: //shabbypenguin.c...P-Kernels&folder=Alpha On e988 did not start alpha-1 Post has been editedDirt13 - 14.04.14, 13:48 |
Message#46 16.04.14, 16:47 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 84 Check in: 15.10.12 LG Optimus G Pro Reputation: 1 | Is it possible to put Quickmemo on CM 10.2 stable? |
Message#47 18.04.14, 08:00 | |
Novice [offline] Group: Active users Messages 47 Check in: 24.01.13 Samsung Galaxy S8 Exynos Reputation: 3 | Hello. I have such a problem, I can not download the firmware from the header (this [ROM] [4.4.2] [AOSP] Stable Kitkat for LG G pro [20131230]) if anyone has -------------------- Vitek |
Message#48 18.04.14, 11:16 | |
a guest [offline] Group: Users Messages 8 Check in: 12.03.09 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 1 | All with friday! :) I suffer the following problem ... The device E988 is gray. I installed CM11 several times from January, first night builds, and now M5. The firmware is just great - smart, compact, no frills, everything is convenient and thought out. But after a short use all the time he returned to the drain because of the known problem with the microphone. I can not hear the interlocutors. On pure CM11 generally barely. Modified mixer_paths.xml as indicated in the link from the header - it became a little better, but not quite. It was heard a little louder, but now on my side during the call there was background noise in the auditory dynamics. Roughly speaking, I hear myself and everything that is happening around me. I suspect that noise reduction does not work. I met a mention of how to turn it on / off, but I do not find such an item in the menu of the "Phone" application. In order to be heard better by the interlocutors, in principle, the sensitivity of the microphone can still be raised - from those indicated in cap 65 to for example 69-70 (I’ve already checked the last time, you can hear it better, but I didn’t go to the drain because of the battery jordan , was or not). 67 is now set, but I think it should be raised to 69 (or more), otherwise, all the same, you have to speak loudly with the interlocutor. Tell me, how is this going? Maybe the noise is just turned off and you can turn it on somewhere? Who has any settings in mixer_paths? AT build.prop downloadparameterpersist.audio.handset.micchanged todigital...I understand that this parameter refers to the microphone on a wired headset? I did not try to talk through it by the way ... My mixer_paths.xml <? xml version = "1.0" encoding = "ISO-8859-1"?> <mixer> <! - These are the initial mixer settings -> <! - NOTE: For all the devices added under usecases or sound devices -> <! - we should have an initial mixer setting (default value) -> <ctl name = "Voice Rx Device Mute" value = "0" /> <ctl name = "Voice Tx Mute" value = "0" /> <ctl name = "Voice Rx Volume" value = "0" /> <ctl name = "TTY Mode" value = "Off" /> <ctl name = "LINEOUT1 Volume" value = "12" /> <ctl name = "LINEOUT2 Volume" value = "12" /> <ctl name = "LINEOUT3 Volume" value = "12" /> <ctl name = "LINEOUT4 Volume" value = "12" /> <ctl name = "LINEOUT5 Volume" value = "12" /> <ctl name = "HPHL Volume" value = "6" /> <ctl name = "HPHR Volume" value = "6" /> <ctl name = "RX1 Digital Volume" value = "60" /> <ctl name = "RX2 Digital Volume" value = "60" /> <ctl name = "RX3 Digital Volume" value = "60" /> <ctl name = "RX4 Digital Volume" value = "60" /> <ctl name = "RX5 Digital Volume" value = "60" /> <ctl name = "RX6 Digital Volume" value = "60" /> <ctl name = "RX7 Digital Volume" value = "60" /> <ctl name = "ADC1 Volume" value = "3" /> <ctl name = "ADC2 Volume" value = "3" /> <ctl name = "ADC3 Volume" value = "3" /> <ctl name = "ADC4 Volume" value = "3" /> <ctl name = "ADC5 Volume" value = "3" /> <ctl name = "ADC6 Volume" value = "3" /> <ctl name = "DEC1 Volume" value = "84" /> <ctl name = "DEC2 Volume" value = "84" /> <ctl name = "DEC3 Volume" value = "84" /> <ctl name = "DEC4 Volume" value = "84" /> <ctl name = "DEC5 Volume" value = "84" /> <ctl name = "DEC6 Volume" value = "84" /> <ctl name = "DEC7 Volume" value = "68" /> // In stock 84 <ctl name = "DEC8 Volume" value = "84" /> <ctl name = "DEC9 Volume" value = "84" /> <ctl name = "DEC10 Volume" value = "84" /> <ctl name = "MICBIAS1 CAPLESS Switch" value = "1" /> <ctl name = "MICBIAS2 CAPLESS Switch" value = "0" /> <ctl name = "MICBIAS3 CAPLESS Switch" value = "0" /> <ctl name = "SLIMBUS_3_RX Port Mixer AUX_PCM_DL_RX" value = "0" /> <ctl name = "HDMI_RX Port Mixer SLIM_3_TX" value = "0" /> <ctl name = "AUXPCM_RX Port Mixer SLIM_1_TX" value = "0" /> <ctl name = "SLIMBUS_1_RX Port Mixer AUX_PCM_UL_TX" value = "0" /> <ctl name = "SLIMBUS_0_RX Port Mixer SLIM_0_TX" value = "0" /> <ctl name = "SLIMBUS_3_RX_Voice Mixer Voice Stub" value = "0" /> <ctl name = "SLIMBUS_1_RX Mixer Voice Stub" value = "0" /> <ctl name = "STUB_RX Mixer Voice Stub" value = "0" /> <ctl name = "Voice Stub Tx Mixer STUB_TX_HL" value = "0" /> <ctl name = "Voice Stub Tx Mixer AUX_PCM_UL_TX" value = "0" /> <ctl name = "Voice Stub Tx Mixer SLIM_1_TX" value = "0" /> <ctl name = "Voice Stub Tx Mixer STUB_1_TX_HL" value = "0" /> <ctl name = "Voice Stub Tx Mixer SLIM_3_TX" value = "0" /> <ctl name = "AUX_PCM_RX Audio Mixer MultiMedia1" value = "0" /> <ctl name = "AUX_PCM_RX Audio Mixer MultiMedia2" value = "0" /> <ctl name = "AUX_PCM_RX Audio Mixer MultiMedia5" value = "0" /> <ctl name = "HDMI_RX_Voice Mixer Voice Stub" value = "0" /> <ctl name = "AUX_PCM_RX_Voice Mixer Voice Stub" value = "0" /> <ctl name = "MultiMedia5 Mixer SLIM_0_TX" value = "0" /> <ctl name = "MultiMedia1 Mixer SLIM_0_TX" value = "0" /> <ctl name = "HDMI Mixer MultiMedia1" value = "0" /> <ctl name = "HDMI Mixer MultiMedia2" value = "0" /> <ctl name = "HDMI Mixer MultiMedia5" value = "0" /> <ctl name = "SLIMBUS_0_RX Audio Mixer MultiMedia1" value = "0" /> <ctl name = "SLIMBUS_0_RX Audio Mixer MultiMedia2" value = "0" /> <ctl name = "SLIMBUS_0_RX Audio Mixer MultiMedia5" value = "0" /> <ctl name = "IIR1 INP1 MUX" value = "ZERO" /> <ctl name = "SLIM TX10 MUX" value = "ZERO" /> <ctl name = "SLIM TX9 MUX" value = "ZERO" /> <ctl name = "SLIM TX8 MUX" value = "ZERO" /> <ctl name = "SLIM TX7 MUX" value = "ZERO" /> <ctl name = "SLIM TX6 MUX" value = "ZERO" /> <ctl name = "SLIM TX5 MUX" value = "ZERO" /> <ctl name = "SLIM TX4 MUX" value = "ZERO" /> <ctl name = "SLIM TX3 MUX" value = "ZERO" /> <ctl name = "SLIM TX2 MUX" value = "ZERO" /> <ctl name = "SLIM TX1 MUX" value = "ZERO" /> <ctl name = "DEC10 MUX" value = "ZERO" /> <ctl name = "DEC9 MUX" value = "ZERO" /> <ctl name = "DEC8 MUX" value = "ZERO" /> <ctl name = "DEC7 MUX" value = "ZERO" /> <ctl name = "DEC6 MUX" value = "ZERO" /> <ctl name = "DEC5 MUX" value = "ZERO" /> <ctl name = "DEC4 MUX" value = "ZERO" /> <ctl name = "DEC3 MUX" value = "ZERO" /> <ctl name = "DEC2 MUX" value = "ZERO" /> <ctl name = "DEC1 MUX" value = "ZERO" /> <ctl name = "RX3 MIX2 INP2" value = "ZERO" /> <ctl name = "RX3 MIX2 INP1" value = "ZERO" /> <ctl name = "RX2 MIX2 INP2" value = "ZERO" /> <ctl name = "RX2 MIX2 INP1" value = "ZERO" /> <ctl name = "RX1 MIX2 INP2" value = "ZERO" /> <ctl name = "RX1 MIX2 INP1" value = "ZERO" /> <ctl name = "RX7 MIX1 INP2" value = "ZERO" /> <ctl name = "RX7 MIX1 INP1" value = "ZERO" /> <ctl name = "RX6 MIX1 INP2" value = "ZERO" /> <ctl name = "RX6 MIX1 INP1" value = "ZERO" /> <ctl name = "RX5 MIX1 INP2" value = "ZERO" /> <ctl name = "RX5 MIX1 INP1" value = "ZERO" /> <ctl name = "RX4 MIX1 INP2" value = "ZERO" /> <ctl name = "RX4 MIX1 INP1" value = "ZERO" /> <ctl name = "RX3 MIX1 INP2" value = "ZERO" /> <ctl name = "RX3 MIX1 INP1" value = "ZERO" /> <ctl name = "RX2 MIX1 INP2" value = "ZERO" /> <ctl name = "RX2 MIX1 INP1" value = "ZERO" /> <ctl name = "RX1 MIX1 INP3" value = "ZERO" /> <ctl name = "RX1 MIX1 INP2" value = "ZERO" /> <ctl name = "RX1 MIX1 INP1" value = "ZERO" /> <ctl name = "RX6 DSM MUX" value = "CIC_OUT" /> <ctl name = "RX4 DSM MUX" value = "CIC_OUT" /> <ctl name = "HPHL DAC Switch" value = "0" /> <ctl name = "DAC1 Switch" value = "0" /> <ctl name = "SLIM_0_RX Channels" value = "One" /> <ctl name = "SLIM_0_TX Channels" value = "One" /> <ctl name = "SLIM_3_RX Channels" value = "One" /> <! - These are audio route (FE to BE) specific mixer settings -> <path name = "deep-buffer-playback"> <ctl name = "SLIMBUS_0_RX Audio Mixer MultiMedia1" value = "1" /> </ path> <path name = "deep-buffer-playback hdmi"> <ctl name = "HDMI Mixer MultiMedia1" value = "1" /> </ path> <path name = "deep-buffer-playback speaker-and-hdmi"> <path name = "deep-buffer-playback hdmi" /> <path name = "deep-buffer-playback" /> </ path> <path name = "deep-buffer-playback bt-sco"> <ctl name = "AUX_PCM_RX Audio Mixer MultiMedia1" value = "1" /> </ path> <path name = "low-latency-playback"> <ctl name = "SLIMBUS_0_RX Audio Mixer MultiMedia5" value = "1" /> </ path> <path name = "low-latency-playback hdmi"> <ctl name = "HDMI Mixer MultiMedia5" value = "1" /> </ path> <path name = "low-latency-playback bt-sco"> <ctl name = "AUX_PCM_RX Audio Mixer MultiMedia5" value = "1" /> </ path> <path name = "low-latency-playback speaker-and-hdmi"> <ctl name = "HDMI Mixer MultiMedia5" value = "1" /> <ctl name = "SLIMBUS_0_RX Audio Mixer MultiMedia5" value = "1" /> </ path> <path name = "multi-channel-playback hdmi"> <ctl name = "HDMI Mixer MultiMedia2" value = "1" /> </ path> <path name = "audio-record"> <ctl name = "MultiMedia1 Mixer SLIM_0_TX" value = "1" /> </ path> <path name = "audio-record bt-sco"> <ctl name = "MultiMedia1 Mixer AUX_PCM_UL_TX" value = "1" /> </ path> <path name = "low-latency-record"> <ctl name = "MultiMedia5 Mixer SLIM_0_TX" value = "1" /> </ path> <path name = "low-latency-record bt-sco"> <ctl name = "MultiMedia5 Mixer AUX_PCM_UL_TX" value = "1" /> </ path> <path name = "voice-call"> <ctl name = "STUB_RX Mixer Voice Stub" value = "1" /> <ctl name = "Voice Stub Tx Mixer STUB_TX_HL" value = "1" /> <ctl name = "Voice Stub Tx Mixer STUB_1_TX_HL" value = "1" /> <ctl name = "RX1 MIX2 INP1" value = "IIR1" /> <ctl name = "RX2 MIX2 INP1" value = "IIR1" /> </ path> <path name = "voice-call hdmi"> <ctl name = "Voice Stub Tx Mixer SLIM_3_TX" value = "1" /> <ctl name = "HDMI_RX_Voice Mixer Voice Stub" value = "1" /> <ctl name = "HDMI_RX Port Mixer SLIM_3_TX" value = "1" /> <ctl name = "Voice Stub Tx Mixer STUB_TX_HL" value = "1" /> </ path> <path name = "voice-call bt-sco"> <ctl name = "Voice Stub Tx Mixer AUX_PCM_UL_TX" value = "1" /> <ctl name = "SLIMBUS_1_RX Mixer Voice Stub" value = "1" /> <ctl name = "Voice Stub Tx Mixer SLIM_1_TX" value = "1" /> <ctl name = "AUX_PCM_RX_Voice Mixer Voice Stub" value = "1" /> <ctl name = "SLIMBUS_1_RX Port Mixer AUX_PCM_UL_TX" value = "1" /> <ctl name = "AUXPCM_RX Port Mixer SLIM_1_TX" value = "1" /> <ctl name = "SLIM_3_RX Channels" value = "One" /> <ctl name = "SLIMBUS_3_RX_Voice Mixer Voice Stub" value = "1" /> <ctl name = "SLIMBUS_3_RX Port Mixer AUX_PCM_DL_RX" value = "1" /> </ path> <! - These are actual sound device specific mixer settings -> <path name = "dmic1"> <ctl name = "SLIM_0_TX Channels" value = "One" /> <ctl name = "SLIM TX7 MUX" value = "DEC7" /> <ctl name = "DEC7 MUX" value = "DMIC1" /> </ path> <path name = "adc1"> <ctl name = "SLIM_0_TX Channels" value = "One" /> <ctl name = "SLIM TX7 MUX" value = "DEC6" /> <ctl name = "DEC6 MUX" value = "ADC1" /> </ path> <path name = "adc2"> <ctl name = "SLIM_0_TX Channels" value = "One" /> <ctl name = "SLIM TX7 MUX" value = "DEC8" /> <ctl name = "DEC8 MUX" value = "ADC2" /> </ path> <path name = "adc3"> <ctl name = "SLIM_0_TX Channels" value = "One" /> <ctl name = "SLIM TX7 MUX" value = "DEC4" /> <ctl name = "DEC4 MUX" value = "ADC3" /> </ path> <path name = "speaker"> <ctl name = "SLIM_0_RX Channels" value = "One" /> <ctl name = "RX3 MIX1 INP1" value = "RX1" /> <ctl name = "RX3 MIX1 INP2" value = "RX6" /> <ctl name = "RX4 DSM MUX" value = "DSM_INV" /> <ctl name = "RX3 Digital Volume" value = "60" /> <ctl name = "SLIM TX3 MUX" value = "RMIX3" /> </ path> <path name = "speaker-reverse"> <! - mono speaker, no channel swap here -> <path name = "speaker" /> </ path> <path name = "speaker-mic"> <path name = "adc3" /> <ctl name = "DEC4 Volume" value = "70" /> </ path> <path name = "handset"> <ctl name = "ES325 RX1 Enable" value = "1" /> <ctl name = "ES325 TX1 Enable" value = "1" /> <ctl name = "ES325 INTERNAL ROUTE CONFIG" value = "PRI MIC LOOPBACK" /> <ctl name = "SLIM_0_RX Channels" value = "One" /> <ctl name = "RX1 MIX1 INP1" value = "RX1" /> <ctl name = "RX1 MIX1 INP2" value = "RX6" /> <ctl name = "EAR PA Gain" value = "POS_6_DB" /> <ctl name = "DAC1 Switch" value = "1" /> <ctl name = "SLIM TX3 MUX" value = "RMIX1" /> <ctl name = "RX1 Digital Volume" value = "65" /> // In stock 57 </ path> <path name = "handset-mic"> <path name = "adc1" /> <ctl name = "DEC6 Volume" value = "59" /> </ path> <path name = "headphones"> <ctl name = "SLIM_0_RX Channels" value = "Two" /> <ctl name = "RX1 MIX1 INP1" value = "RX1" /> <ctl name = "RX1 MIX1 INP2" value = "RX6" /> <ctl name = "RX2 MIX1 INP1" value = "RX2" /> <ctl name = "RX2 MIX1 INP2" value = "RX7" /> <ctl name = "HPHL DAC Switch" value = "1" /> <ctl name = "RX1 Digital Volume" value = "60" />// In stock 57 <ctl name = "RX2 Digital Volume" value = "60" />// In stock 57 <ctl name = "HPHL Volume" value = "6" /> <ctl name = "HPHR Volume" value = "6" /> <ctl name = "SLIM TX5 MUX" value = "RMIX2" /> </ path> <path name = "headset-mic"> <path name = "adc2" /> <ctl name = "IIR1 INP1 Volume" value = "60" /> <ctl name = "IIR1 INP1 MUX" value = "DEC8" /> <ctl name = "ADC2 Volume" value = "2" /> </ path> <path name = "voice-handset-tmus"> <path name = "handset" /> </ path> <path name = "voice-speaker"> <path name = "speaker" /> <ctl name = "RX3 Digital Volume" value = "73" /> </ path> <path name = "voice-speaker-mic"> <ctl name = "SLIM_0_TX Channels" value = "One" /> <ctl name = "SLIM TX7 MUX" value = "DEC7" /> <ctl name = "DEC7 MUX" value = "ADC1" /> <ctl name = "DEC7 Volume" value = "60" /> <ctl name = "ADC1 Volume" value = "3" /> <ctl name = "MICBIAS1 CAPLESS Switch" value = "0" /> </ path> <path name = "voice-headphones"> <path name = "headphones" /> <ctl name = "SLIM TX3 MUX" value = "RMIX1" /> <ctl name = "HPHL Volume" value = "8" /> <ctl name = "HPHR Volume" value = "8" /> </ path> <path name = "voice-headset-mic"> <path name = "headset-mic" /> </ path> <path name = "speaker-and-headphones"> <path name = "headphones" /> <ctl name = "RX3 MIX1 INP1" value = "RX1" /> <ctl name = "RX3 MIX1 INP2" value = "RX6" /> <ctl name = "RX5 MIX1 INP1" value = "RX2" /> <ctl name = "RX5 MIX1 INP2" value = "RX7" /> <ctl name = "RX4 DSM MUX" value = "DSM_INV" /> <ctl name = "RX6 DSM MUX" value = "DSM_INV" /> </ path> <path name = "hdmi"> </ path> <path name = "speaker-and-hdmi"> <path name = "speaker" /> <path name = "hdmi" /> </ path> <path name = "voice-rec-mic"> <path name = "adc1" /> <ctl name = "ADC1 Volume" value = "2" /> </ path> <path name = "camcorder-mic"> <path name = "adc1" /> <ctl name = "DEC6 Volume" value = "90" /> </ path> <path name = "hdmi-mic"> <path name = "dmic1" /> </ path> <path name = "bt-sco-headset"> </ path> <path name = "bt-sco-mic"> </ path> <! - Dual MIC devices -> <path name = "dmic-endfire"> <ctl name = "ES325 RX1 Enable" value = "1" /> <ctl name = "ES325 TX1 Enable" value = "1" /> <ctl name = "ES325 INTERNAL ROUTE CONFIG" value = "TWO MIC CT" /> <ctl name = "SLIM TX7 MUX" value = "DEC7" /> <ctl name = "DEC7 MUX" value = "ADC1" /> <ctl name = "SLIM TX8 MUX" value = "DEC9" /> <ctl name = "DEC9 MUX" value = "ADC3" /> <ctl name = "SLIM_0_TX Channels" value = "Two" /> <ctl name = "DEC7 Volume" value = "67" /> // In stock 57, previously increased to 69 <ctl name = "DEC9 Volume" value = "63" /> <ctl name = "MICBIAS1 CAPLESS Switch" value = "0" /> <ctl name = "MICBIAS3 CAPLESS Switch" value = "0" /> <ctl name = "IIR1 INP1 MUX" value = "DEC7" /> </ path> <path name = "dmic-broadside"> <ctl name = "SLIM TX7 MUX" value = "DEC7" /> <ctl name = "DEC7 MUX" value = "DMIC1" /> <ctl name = "SLIM TX8 MUX" value = "DEC8" /> <ctl name = "DEC8 MUX" value = "DMIC2" /> <ctl name = "SLIM_0_TX Channels" value = "Two" /> <ctl name = "IIR1 INP1 Volume" value = "63" /> <ctl name = "IIR1 INP1 MUX" value = "DEC7" /> </ path> <path name = "speaker-dmic-endfire"> <ctl name = "SLIM TX7 MUX" value = "DEC7" /> <ctl name = "DEC7 MUX" value = "ADC1" /> <ctl name = "SLIM TX8 MUX" value = "DEC9" /> <ctl name = "DEC9 MUX" value = "ADC3" /> <ctl name = "SLIM_0_TX Channels" value = "Two" /> </ path> <path name = "speaker-dmic-broadside"> <ctl name = "SLIM TX7 MUX" value = "DEC7" /> <ctl name = "DEC7 MUX" value = "DMIC1" /> <ctl name = "SLIM TX8 MUX" value = "DEC8" /> <ctl name = "DEC8 MUX" value = "DMIC2" /> <ctl name = "SLIM_0_TX Channels" value = "Two" /> </ path> <path name = "voice-dmic-ef-tmus"> <path name = "dmic-endfire" /> </ path> <path name = "voice-dmic-ef"> <path name = "dmic-endfire" /> </ path> <path name = "voice-dmic-bs"> <path name = "dmic-broadside" /> </ path> <path name = "voice-speaker-dmic-ef"> <path name = "speaker-dmic-endfire" /> </ path> <path name = "voice-speaker-dmic-bs"> <path name = "speaker-dmic-broadside" /> </ path> <path name = "voice-rec-dmic-ef"> <path name = "dmic-endfire" /> </ path> <path name = "voice-rec-dmic-bs"> <path name = "dmic-broadside" /> </ path> <path name = "voice-rec-dmic-ef-fluence"> <path name = "dmic-endfire" /> </ path> <path name = "voice-rec-dmic-bs-fluence"> <path name = "dmic-broadside" /> </ path> <! - TTY devices -> <path name = "tty-headphones"> <ctl name = "SLIM_0_RX Channels" value = "One" /> <ctl name = "RX1 MIX1 INP1" value = "RX6" /> <ctl name = "RX1 MIX1 INP2" value = "RX6" /> <ctl name = "HPHL DAC Switch" value = "1" /> <ctl name = "HPHL Volume" value = "9" /> <ctl name = "HPHR Volume" value = "9" /> </ path> <path name = "voice-tty-full-headphones"> <ctl name = "TTY Mode" value = "FULL" /> <path name = "tty-headphones" /> </ path> <path name = "voice-tty-vco-headphones"> <ctl name = "TTY Mode" value = "VCO" /> <path name = "tty-headphones" /> </ path> <path name = "voice-tty-hco-handset"> <ctl name = "TTY Mode" value = "HCO" /> <path name = "handset" /> </ path> <path name = "voice-tty-full-headset-mic"> <path name = "adc2" /> </ path> <path name = "voice-tty-hco-headset-mic"> <path name = "adc2" /> </ path> <path name = "voice-tty-vco-handset-mic"> <path name = "adc1" /> </ path> </ mixer> Posted on 04/18/2014 11:16: koshak1507 Here apk download and put =>http://trashbox.ru/topics/20713/quick-memo-1.0.9 |
Message#49 30.04.14, 07:21 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 292 Check in: 07.01.11 Xiaomi Redmi Note 5 3/32 Reputation: 12 | |
Message#50 30.04.14, 11:04 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 283 Check in: 05.10.08 Reputation: 38 | [email protected], 08:21 Hello everyone, who will tell gaps on cm11? I did not find a hat? Google apps -------------------- |
Message#51 03.05.14, 13:37 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 27.03.12 Reputation: 0 | Tell me how to assign a search button (in this prose it is so indicated) any application? And advise the application Tipo QuickMemo (which was on the stock firmware), so that it will assign this button. And then QuickMemo from the stock is not set and you can only assign to the mood for this button of only 5 points. |
Message#52 05.05.14, 20:00 | |
Observer [offline] Group: Friendssavagemessiahzine.com Messages 720 Check in: 01.09.12 Meizu M2 Note Reputation: 83 | Has anyone put cm11 m6? How is she? And I would like to see screenshots, because what is the difference from the usual cm11 I do not know: yes2: |
Message#53 05.05.14, 20:42 | |
Not Guru, just learning [offline] Group: Moderators Messages 6157 Check in: 07.03.11 Reputation: 1577 | |
Message#54 05.05.14, 21:22 | |
Not Guru, just learning [offline] Group: Moderators Messages 6157 Check in: 07.03.11 Reputation: 1577 | Horrormem Well, it’s worth it, it immediately makes me happy that the waffle worked more efficiently, everything is fine with the connection, the signal level is excellent, I rang for different operators and I could hear me without external noises, as for the battery, I need at least a day. LG G PRO E-988. -------------------- |
Message#55 05.05.14, 22:10 | |
Observer [offline] Group: Friendssavagemessiahzine.com Messages 720 Check in: 01.09.12 Meizu M2 Note Reputation: 83 | draiv88,Screenshots can you post? |
Message#56 06.05.14, 17:12 | |
Not Guru, just learning [offline] Group: Moderators Messages 6157 Check in: 07.03.11 Reputation: 1577 | Horrormem Tell me what. Now, about the battery, I will not say that I didn’t have time, so there were trifles about seven calls and 15 minutes. Net. From 8.00 to 17.00, I took two percent. In previous firmware, 15 percent with the same mode already It was. -------------------- |
Message#57 06.05.14, 17:40 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 27.03.12 Reputation: 0 | Well, then someone will tell me a thread? :-( |
Message#58 06.05.14, 19:01 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 61 Check in: 06.10.12 Google nexus 4 Reputation: 1 | Do you guys even have a reason to bet? Do such features fly as it is on the drain of the Tipo Quick Memo Quick Time indicator settings and so on and so on? And will it be difficult and dangerous to roll back to stock? Thank you in advance) |
Message#59 06.05.14, 19:58 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 27.03.12 Reputation: 0 | Do you guys even have a reason to bet? Do such features fly as it is on the drain of the Tipo Quick Memo Quick Time indicator settings and so on and so on? And will it be difficult and dangerous to roll back to stock? Thank you in advance) Quick memo flies, Quick remout can be separately delivered. The indicator setting is. If the hands are not crooked with rollback problems will not. |
Message#60 06.05.14, 20:58 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 61 Check in: 06.10.12 Google nexus 4 Reputation: 1 | SIMBImAN, thank) |
Message#61 07.05.14, 08:27 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 61 Check in: 06.10.12 Google nexus 4 Reputation: 1 | Where can I find manual installation instructions? |
mobile version | Now: 04.29.19, 05:39 |